Estimate for renovation of Guest Houses in Sector 68, SAS Nagar

Amount

Dismantling aluminium/Gypsum partitions, doors, windows fixed glazing and false ceiling including disposal of unserviceable material and stacking of serviceable material as directed by Engineer-in-charge

Removing Doors and Windows (Steel or wood) with chowkhats by making recesses in walls when the wall is not to be dismantled.

1st class burnt Brick work laid in csm 1:4 in first story upto 4 metre above plinth level

12.5 mm thick cement plaster 1:4

Cement Concrete 1:2:4 mixing by manual means

Centering and Shuttering for sides and soffits of beam, beams, launching girders, bressumers, lintels

Cold twisted deformed (Ribbed/Tor Steel Bar/TMT) Bars Fe 500 grade as per IS 1786-2008, for R.C.C works, where not including in the complete rate of RCC including bending and placing in position complete

Chowkats of commercial hard wood such as Hollock confirming to ISI specification no 1003 m Kiln seasoned of doors and windows including iron hold fasts, corner straps cleats, stops, bolts for hold fasts etc, complete fixed in position. Single Rebate (60mm X 100mm)

Providing and Fixing glass panes with nails and putty or wooden strip complete in all respect. B)Glazing area above 0.09 sqm. (iii) 5.0 mm thick Plate glass (INDIAN)

Factory manufactured flush door fixed in position iron hinges, etc (excluding the cost of any fittings other than specified above but including labour for fixing the same in position © Decorative with teak facing on both sides edges lipped with teak with laminated core 35 mm thick.

Providing and fixing bright finished brass 100 mm mortise latch and lock with 6 levers and a pair of lever handles with necessary screws etc. complete (best make of approved quality

Providing and fixing hydraulic door closer ISI mark with necessary screw etc. complete I.S.I. Designation No. III (size of door 851 mm to 1000 mm)

Providing & fixing 8" stainless steel tower bolts ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge.

RECESSED PVC CONDUIT PIPE WIRING SYSTEM WITH MODULAR SWIITCHES: Wiring in PVC insulated copper conductor single core FR cable (ISI marked) overall 1.5sq. Mm, 1100volts grade to be laid in heavy gauge PVC conduit pipe 20mm/25mm dia. (ISI Marked) recessed in wall etc., complete with powder coated/anodized concealed metal boxes (1.6 mm thick with Brass lugs) required for suitable number of modules (Modular accessories) for having step type electronic fan regulators (two module) 100 watts, bell push, 6amp. 2/3 universal socket (shuttered), 16/20 Amp. combined/ universal Socket (shuttered), 6/10Amp. Switches, 16/20Amp. switches with indicator etc. and covered with Frame plate etc., PVC connector (For Fan box and Call Bell), Steel Hooks, Sheet metal fan box (1.6mm thick shape hexagonal), Circular Junction Boxes (Four way PVC 1.5" deep for walls and CI 3" deep for ceiling), bonding to earth with PVC insulated copper conductor single core FR cable (ISI marked) 1sq.mm, 1100 volts grade (For 6Amp. wall socket & plug control point) and other petty material etc., including the cost of above material, cutting and filling up of chases (with finishing the surface)

a Wiring fan point (Without fan box)

Wiring light point.

Wiring call-bell point

Wiring 6 Amp. Wall socket point

Wiring light point with double control switches

REPLACEMENT OF WIRES, COVER FRAMES, MODULAR SWITCHES, CONCEALED METAL BOXES AND OTHER ACCESSORIES IN THE EXISTING RECESSED CONDUIT PIPE WIRING SYSTEM (WITH MODULAR TYPE ACCESSORIES)

A Wiring fan point (Without fan box)

Wiring light point.

Wiring 6Amp. Wall socket point

Wiring 16/20 Amp. Power plug control point

Providing & Fixing false ceiling at all heights with GRG (Glass Fiber Reinforced Gypsum) false ceiling tiles of size 595X595 mm of approved texture, design and patterns having moisture content less than 2%, humidity resistance of 99%, NRC 0.50 to 0.75 as per IS 8225:1987, Non combustible as per BS 476 (part 4)- 1970 and light reflectance of 85% (minimum) to be laid in true horizontal level suspended on inter-locking metal T-Grid of hot dipped galvanised iron section of 0.33 mm thick (galvanised @ 120 grams per sqm including both sides) comprising of main -T runners of size 15X32 mm of length 3000 mm, cross-T of size 15 X 32 mm of length 1200 mm and secondary intermediate cross-T of size 15x32 mm of length 600 mm to form grid module of size 600 x 600 mm, suspended from ceiling using galvanised mild steel items (galvanizing @ 8 grams per sqm) i.e. 50 mm long, 8 mm outer diameter M-6 dash fasteners, 6 mm dia fully threaded hanger rod upto 1000 mm length and L shape level adjuster of size 85 x 25 x 2 mm. Galvanised iron perimeter wall angle of size 24x24x0.40 mm of length 3000 mm to be fixed on periphery wall/partition with the help of plastic rawl plugs at 450 mm center to center and 40 mm long dry wall wood screws. The work shall be carried out as per specifications, drawings and as per directions of the Engineer-in-charge. 12 mm thick micro tegular edged semi perforated GFRG (Glass Fired Reinforced Gypsum) false ceiling tiles of Size 595x595 mm.

Providing and fixing ceiling consisting of 12.5 mm thick Gypsum Board of any size G.I. Cradling hanged from the ceiling by means of G.I. hanger complete as per drawings, specifications and to the entire satisfaction of engineer-in-charge

Preparation of plastered or concrete surface for painting (including sand papering the surface) using Acrylic Wall Putty by applying two or more coats to get required finish including priming coat to make an even surface before applying Acrylic Wall putty on new plastered surface. Complete as per specifications.

Wall painting with (bio grade) plastic emulsion paint of approved brand and manufacturer to give an even shade (two or more coats) Generally used in hospital building etc. Complete as per specifications.

Painting two or more coats with synthetic enamel paints inall shades on old wood work or metallic or plastered or concrete surface to give an even shade including rubbing down old paint.

Providing and fixing commercial plywood 18 mm thick

Hollock wood cup board shutter with plywood panels or faced on both side fixed in position (excluding the cost of handles, bolts hasp with staple but including the labour for fixing them) 25 mm thick

Providing and fixing decorative high pressure laminated sheet 1 mm SF thick with high density protective suface layer and reverse side of adhesive bonding quality conforming to IS:2046 Type S, including cost of adhesive of approved quality.

Providing & Fixing in position mirror of superior glass size 1500 mmx 600 mm or any other required size (of approved quality) and of required shape and size with high quality polystyrene moulding frame of 40 to 50 mm size (of approved quality and shade) with 4 mm thick hardboard backing fixed in with rawl plugs 50 mm, C.P. brass screws and washers complete in all respect.

Providing and fixing 9 " stainless steel handles ISI marked on door & window frames complete in all respect as per the directions of Engineer-in-charge

Providing and fixing ACP sheets of various thickness High class ISI marked complete in all respect as per the directions of Engineer-in-charge. (ii) 4 mm thick ACP sheet

Dismantling glazed tiles (to be carefully removed).

Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge.

Dismantling Sanitary fixtures such as Eurpoean/Indian/Orissa W.C., PVC / China ware cistern, Wash Hand Basin, Urinal Pot, Sinks and CP Fittings and disposal of dismantled material within a distance of 100 Mtr. complete in all respect as required by Engineer-in-Charge.

Providing and laying vitrified floor tiles of different sizes in light colour shades made using Double Charge technology (thickness to be specified by the manufacturer) with water absorption’s less than 0.08% and conforming to IS : 15622 of approved make in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement: 4 fine sand), complete. Size 600x600 mm

Providing and fixing 1st quality ceramic glazed wall tiles Matt/Semi Matt/Glosy/Highly Gloss finish/Highlighter/emboss conforming to IS : 15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of size 600 x600 mm as approved by Engineer-in-Charge in skirting, risers of steps and dados over 12 mm thick bed of cement Mortar 1:4 (1 cement:4 fine sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete.

Waterproofing of wet areas ( Concrete/ Masonary Surface ) and any water retaining structures such as swimming pools, water tanks, Bathrooms, toilets, balconies, planters etc with high performance polymer modified cementitionous coating ( DR. FIXIT FASTFLEX / Equivalent ) to provide tough film build-up and highly elastic film formation, which accommodate thermal movements so as to provide seamless coating without any joints to prevents water leakage. The scope of work also includes surface prepration and cleaning, washing and removing dust,dirt and loose particles from concrete / masonary surface complete in all respects.

Providing and fixing in position Chinaware Floor Mounted One Piece EWC type with matching chinaware cistern 10 ltr. Capacity. (without cistern fitting) with P trap or S trap of approved make (to the approval of the Engineer-in-charge) and seat cover complete in all respect and to the entire satisfaction of Engineer-in-charge.

Providing and fixing in position vitreous chinaware white lavatory suites of approved make ( to the approval of Engineer-in-charge)consisting of C.P. brass waste 32mm diawith one C.P. brass pillar tap complete in all respect. Size 630mm x 500mm (above counter oval)

CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in-Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. CPVC SDR 11 Pipe & fitting 16mm o/d

CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in-Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. CPVC SDR 11 Pipe & fitting 20mm o/d

CONCEALED IN WALL: Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes as per IS 15778 (ISI marked with the prior approval of Engineer-in-Charge), having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00 m spacing including jointing of pipes & fittings, with one step CPVC solvent cement and testing of pipes complete as per direction of Engineer-in-Charge. CPVC SDR 11 Pipe & fitting 25mm

Cutting holes upto 23cm square for pipes in flooring and roofs of bricks, tiles with lime concrete or cement concrete and making good including repointing, replastering and colour or white washing where required. Through floor or roof 22.50 cm thick

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 75 mm x 75 mm

Cutting chase in brick walls in cement or in floor for embedding G.I. or C.I pipes lines and making good the same to its original condition. Size 225 mm x 225 mm

Providing and fixing in position SWR UPVC soil waste vent or antisyphonage pipes to I.S.I. 13592 of approved make (to the approval of EIC) including cutting, jointing, wastage, but excluding cost of lead jointing. 110mm i/d SWR UPVC pipe lines laid complete

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 110mm o/d pipesElbow 90 Degree (All side socketed)

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 110mm o/d pipes Reducer 110mm x 75mm

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its original condition but excluding cost of lead joining. For 110mm o/d pipes Coupler

Providing and fixing in position SWR UPVC special for soil waste vent or anti syphonage pipes to I.S.I specifications of E.L.C manufacture or any other reputed firm including cutting and wastage etc. cutting holes in walls roofs or floors etc. and making good to its originalcondition but excluding cost of lead joining. For 110mm o/d pipes P Trap/Floor Trap110mm x 75mm

Providing and fixing in position C.P elbow action pillar tap of approved make (to the approval of Engineer-in-charge) complete in all respect.

Providing & Fixing in postion stop cock / Angle valve (as approved by the Engineer- incharge). C.P.brass 15mm Angle valve

Providing and fixing divertors of approved make (to the approval of Engineer-in-charge ) for bath and shower system complete in all respect. Single lever concealed divertor for bath and shower system (high flow) (with body and upper part)

Providing and fixing in position C.P. brass overhead shower round or square 1 flow without shower arm with 15mm i/d inlet of approved make (to the approval of Engineer-incharge) complete in all respect. CP Brass rain Fall Shower without arm 8" round

Providing and fixing in position C.P. brass overhead shower arm chrome round or square with 15mm i/d inlet of approved make (to the approval of Engineer-in- charge) complete in all respect. CP Brass rain Fall Shower arm 18" length square chrome

Providing & fixing in position C.P. brass tube connection braided SS304 of approved make (to the approval of Engineer-in-charge ) complete in all respect. CP Brass Flexible tube Connection Braided SS304 of size 15mm x 600 mm long

Providing & Fixing in position C.P. Brass extension piece 15mm dia, 15mm long or 25mm long or 50mm long with various fixtures complete in all respects (as required by the Engineer-in- Charge) C.P. Brass extension piece, 25mm long to 50mm long

Providing and fixing in position C.P. brass bottle trap 32mm dia with 40 mm seal of approved make (to the approval of Engineer-incharge) complete in all respect.

Providing and fixing in position paper holders of approved make (to the approval of Engineerin- charge ) fixed in to wall with C.P brass screws complete in all respect. C.P. brass toilet paper holder

Providing & Fixing in postion liquid soap container of approved make (to the approval of Engineer-in-charge ) complete in all respect. Acrylic liquid soap container

Providing and fixing in position towel rails / ring of approved make (to the approval of Engineer-in-charge ) fixed in with rawl plugs embedded in walls with brass screws complete in all respect. C.P. brass towel bracket (610 mm long)

Providing & Fixing in position 5mm thick bevelled edge mirror of superior glass (of approved make) complete with 4mm thick hard board backing fixed in with rawl plugs 50mm, C.P. brass screws and washers and S/S Studs on top complete in all respect (as required by the Engineer-in- Charge) Size 1500mmx600mm or any other size

Providing and laying flamed finish Granite stone 18mm thick in flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

Providing opening of required size & shape for wash basin/ kitchen sink in kitchen platform, vanity counter and similar location in marble/ granite/ stone work, including necessary holes for pillar taps etc. including moulding, rubbing and polishing of cut edges etc. complete.

Providing and fixing in position stainless steel sinks of approved make (to the approval of Engineer-in-charge) 1mm thick, grade-304 (18/8) with waste coupling complete in all respect. Double bowl Sink without drain board Overall size 1330x515 bowl size 560x410x200mm

Providing and fixing in position C.P brass basin mixer without pop-up waste system with 450 mm long flexible hose of approved make (to the approval of Engineer-in-charge) instead of C.P. brass pillar tap complete in all respect.

Providing and installing in position of domestic water pressure boosting pump of approved make (To the approval of Engineerin- charge) including all pump accessaries but excluding cost of G.I pipe & specials complete in all respects. Pressure pump of 1.0 HP with 4800 LPH, 45meter head with SS pump & 19 litre capacity Tank

Providing & placing in position on terrace (at all floor levels) HDPE water storage tanks of approved make (to the approval of Engineer -in-charge) with cover with suitable locking arrangement and making necessary holes for inlet, outlet and over flo pipes but without fittings and base support for tank. Triple Layer Tanks

Providing and fixing in position G.I. Tank Nipple of approved make (to the approval of Engineer-incharge) in PVC Water storage tanks complete in all respect. G.I. tank nipple 25mm i/d

Providing and fixing in position automatic brass. Brass Ball Cock with rod and Plastic Ball 25mm i/d

Providing and fixing 12 mm thick frameless toughened glass partition of approved brand and manufacture, including providing and fixing top & bottom fixing arrangement and making necessary holes etc. for fixing required fittings, complete in all respect.

Providing and fixing polycarbonate sheet roof shed including fixing arrangement and making necessary holes etc. for fixing required fittings, complete in all respect.

Ceiling Lights round 6"/8"

Ceiling cob lights round 4"

Ceiling Lights Square 2'x2'

Ceiling coffer lights

Aluminium Industrial ventilator

Heat Pump 300 ltr (water heater)

KRISHNA BUILDER (BID ID -674158)