Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹30.7 LAccepted-AOC | L1 | Accepted-AOC AOC Awarded | |
| 2 | L2₹33.3 L+₹1.8 L (5.85%)Rejected-Finance | L2 | Rejected-Finance Other than lowest quoted tenderer | |
| 3 | L3₹34.5 L+₹3.0 L (9.66%)Rejected-Finance | L3 | Rejected-Finance Other than lowest quoted tenderer | |
| 4 | L4₹34.7 L+₹3.3 L (10.3%)Rejected-Finance 80 G HIMMATGANJ PRAYAGRAJ U P PIN 211016 | PRAYAGRAJ | UTTAR PRADESH | 211016 | L4 | Rejected-Finance Other than lowest quoted tenderer | |
| 5 | L5₹37.2 L+₹5.8 L (18.4%)Rejected-Finance | L5 | Rejected-Finance Other than lowest quoted tenderer |
Tender Value
Refer Docs
EMD Value
₹1 L
Closing Date
26 Sept 2022, 6:55 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE WEST ALLAHABAD
GE WEST ALLAHABAD NEW CANTT ALLAHABAD
SPECIAL REPAIR TO BLDG NO P-38 AND CERTAIN OTHER WORKS AT NEW CANTT ALLAHABAD
2022_MES_548505_1
8588/E8
Open Tender
Civil Works
Item Rate
180 days
NEW CANTT ALLAHABAD
please refer tender documents
7 documents required · 7 mandatory
₹500
GE WEST ALLAHABAD
₹1 L
Yes
22 Oct 2022
29 Aug 2022
28 Sept 2022
29 Aug 2022
26 Sept 2022
12 Sept 2022
Amount
Demolition of PCC in ground floors and pavings n exc 15 cm thickness (below or above ground level) etc complete all as specified and directed.
Demolition of brick work built in cement mortar of any description including all quions arches, pillars, etc complete all as specified and directed.
Taking down chowkhats or frames with shutters (without talking off shutters from the frame) area exc 1.50 and n.exc 4 Sqm each and removing from site complete all as specified and directed.
Dismantling of floor hearth or wall tling including cement mortar bedding (but not backing), removing servicesable tiles to store and rubbish off the premises complete all as specified and directed.
M & L RCC M-25 Design Mix for Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
M & L for half brick work with sub class 'B' bricks (old size) straight or curved on any radius built in CM 1:4 complete all as specified and directed.
M & L for forming jambs, etc. to openings (to foregoing item), including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete
S&F 3 Track UPVC Window fabricated any size of wall thickness 1.2 mm +0.25 mm made out of extruded section plain UPVC Sections. The window Frame made out of Rigid UPVC Sections meter cut at 4 Corners & joint with plastic fusion welding with internal reinforce required. The shutter section made out of extruded Rigid UPVC with internal reinforced with provision of 5mm Glass/wiremesh as per requirement . The window shall be fixed to wall using 65 x 100 MM long MS fasterners at suitable place provided for each vertical and horizontal member etc. complete as per manufacturer's specification and direction of Engineer - In- Charge.
S&F in repair stainless steel sinks with drainage board of 1mm thick in kitchen or laboratory with plug washers and waste pipe including bedding in cement mortar to dwaft wall or including fixing cantilever brackets and connecting union or waste fitting to pipe over all size 915mm x 460mm bowl size 410mm x 330 mm x 160mm complete all as specified and directed.
S&F in repair Stainless steel plate rack(Utensil Rack) of size (900mm x 750mmx260mm ) made out of AISl 304 stainless steel 0.63 mm thick sheet fixed with brass screw of required size including necessary fittings/nuts,bolts & washers complete all as specified and as directed.
M & L for first or premium quality non skid joint free coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.11 sqm but n exc 0.18 sqm,in floor ,wall etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.
M&L for first or premium quality glazed ceramic coloured wall tiles in vertical surface 450X300X7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10 mm thick rendering in 1:4 CM complete all as specified.
M&L for 18 to 20 mm thick Granite work (table rubbed and polished) in cooking platforms, window cill etc in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite including 15 mm thick screed bed in CM 1:6 including demolation of old stone slabcomplete all as specified.
Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping)
Use and waste of formwork to edges of concrete flats, treads, breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/ PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm
M&L 18/19mm thick prelaminated medium density fibre board (MDF) (one side decoratve and other side balancing white), exterior grade adhesive as in cup board shutters/ shelves and cabinets etc., fixed with screw/ nails alround complete all as specified and directed.
M&L for 2nd class hard wood plain fillets square rectangular or triangular in section, sectional area exc 15 and not exc 25 sq cm, wrought on exposed faces fixed with nails complete all as specified and directed.
S&F continuous (Piano) ss hinges, 30 mm width of flaps (when open) fixed with screws complete all as specified and directed
S&F magnetic catches with steel body ‘H’ type fixed to shutter complete all as specified and directed
M&L for preparation of old decorated surfaces of wall including cornices etc and applying one coat of water thinable oil emulsion distemper white or tinted on wall complete all as specified and directed.
M&L for preparation of old painted wooden surfaces or wood base material of any description not otherwise described,surfaces exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.
M&L for Mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips
M & L for moulding to the ends of granite as in cooking platform complete all as specified
M&L for brickwork with fly ash bricks (old size), straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and as directed
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed
M&L for PCC 1:4:8 type D2, using 40mm graded stone aggregate, as in foundation filing,sub base of floor complete all as specified and as directed
M&L for RCC M-25 (design mix) using 20 mm graded stone aggregate as in lintal band at any height complete all as specified and as directed
M&L for Mild steel bars (TMT bars) 5mm dia and over upto and including 10mm dia in strriups,spaces,nibs and binders complete all as specified and as directed.
M & L for posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc.; flat iron fillets (for securing wire mesh etc.) including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.
M & L for two coats of synthetic enamel paint over a coat red oxider primer on new steel surfaces including preparation of surfaces complete all as specified and directe.
S & F Galvanised. 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails strain- ing bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins, etc. as directed (each line wire to be measured)
M & L for two coats of colour wash including preparation of new plastered surfaces of wall complete all as specified and directed
M & L for one coat of colour wash including preparation of old plastered surfaces of wall complete all as specified and directed.
Dismantaling of brick tiles or terracing tiles, single layer on roofs complete all as specified and directed.
Demolition of plain cement concrete in any position including tar felt & cement mortar bedding etc from roof or sunken complete all as specified and directed.
M&L for plain cement concrete 1:2:4 type B-0 (12.5mm graded stone aggregate) as in roof padding,roof kerbs, benching on roof slab and other similar works laid as per slop required finished even and fair complete all as specified and directed.
M&L for 10mm thick plaster in CM 1:3, mixed with liquid water proofing compound over concrete surface of roof when concrete is green complete all as specified and directed.
M&L for cleaning the dust,durt and any other foreign material from roof surface and applying a coat of bituminous primer @ 0.40 ltr / Sqm uniformily and primer shall be allowed to dry over night as conforming to IS 3384-1986 complete all as specified and directed.
M&L for Laying of 3mm thick APP membrane of (reinforced with non-woven fabric polyester type) (weight not less than 3 kg per sqm) shall be done using butane torch maintaining 100mm ie overlap and 150mm end overlap,sealing all overlaps and bonded to the surface by fusing and bonding torchon method complete all as specified and directed. (Note: All water proofing work shall be done as per manufacturer instruction and under supervision of manufacturer technical representative.)
Supply only Liquid water proofing compound (ISI marked) complete all as spesified and directed.
M&L for 40mm thick brick tiles laid over and including 15mm thick screed bed in CM 1:4 mixed with polymer based liquid water proofing additive @ 5 % by weight of cement and the joints of tiles shall be filled with CM 1:3 mixed with crude oil as per SSR-2009 (Part-I) on non assesible roof area complete all as specified and directed.
M&L for 40mm thick brick tiles(useable tiles obtained from item No 34) laid over and including 15mm thick screed bed in CM 1:4 mixed with polymer based liquid water proofing additive @ 5 % by weight of cement and the joints of tiles shall be filled with CM 1:3 mixed with crude oil as per SSR-2009 (Part-I) on non assesible roof area complete all as specified and directed.
Taking down cement plaster on brick or stone walls incl wall tiles etc. with raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surfaces complete all as specified and directed
M & L for first or premium quality non skid joint free coloured ceramic floor tiles 7 to 8 mm thick (square/ rectangular) area of each tile exc 0.18 sqm but n exc 0.36 sqm,in floor ,wall etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface with 15mm thick screed bed or bedding layer in CM (1:6) complete all as specified and directed.
All as per item No 45 above but used as in dado and skirting over and including 10 mm thick 1:4 CM backing on vertical surface of wall complete all as specified and as directed.
M & L for preparation newly plaster surface of wall by electric hand grinder with wite brush and applying two coats of cement base paint with paint sprayer including one coat of primer complete all as specified and directed.
M & L for preparation of old surfaces of wall by scrapping machine tools/electric hand grinder with wite brush and applying one coat of oil emulsion distemper white or tinted on wall with paint sprayer complete all as specified and directed.
M & L for preparation of old surfaces of wall by scrapping machine tools/electric hand grinder with wite brush and applying one coat of cement base paint white or tinted on wall with paint sprayer complete all as specified and directed.
S&F in repair rotational moulded polyethylene water storage tank of capacity 500 ltr (Cylindrical/vertical with closed top) three layer construction, ISI marked hoisted & fixed in position including dismantling of old tank and removing from site complete all as specified and directed.
S&F in repair ball/ float valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe and fixed 15 mm bore minimum weight 142 gms complete all as specified and directed.
S&F in repair 20 mm bore Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.
Taking up or down 15 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning complete all as specified and as directed
Taking up or down 20 mm bore GI steel tubing and connections on (walls, ceiling, floors, etc.) including cleaning complete all as specified and as directed
S&F 15 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.
S&F 20 mm bore GI steel tubing "medium grade" with all fittings and fixed to wall, floor and ceiling etc complete all as specified.
All as per item no 55 herein before but refixing old steel tubing.
All as per item no 56 herein before but refixing old steel tubing.
Taking down chowkat or frames with shutters (without taking off shutters from the frames) area n exc 1.5 Sqm each.
Taking down chowkat or frames with shutters (without taking off shutters from the frames) area exc 1.5 but n exc 4.00 Sqm each.
M&L for 75mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection complete all as specified and directed.
M&L PCC 1:2:4 type B1 with 20 mm graded stone aggregate as in padding over roof slab for making slope on roof top surface complete all as specified.
M & L for first or premium quality coloured Glazed ceramic tiles in vertical surface 450X 350X 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match including screed bed 10mm thick in cement mortar 1:4 finished rough to receive wall tiles etc.
M & L for first or premium quality Non skid ceramic colour tiles 7 to 8 mm thick area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M & L for first or premium quality Non skid ceramic colour tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and directed.
M&L for normal water proofing treatment on roof slab consisting with following operation (i) Existing surface shall be cleaned of all dust, fungus, moss and other foreign material etc by using wir brush & dusting, Apply a layer of bituminous primer conforming to IS 3384 @ 0.4 Lit/m2 on the surface. Laying 3mm thick APP membrane habing non-woven polyester matt at core and under surface coated with plastic polythene film. Laying shall be done using butane torch maintaining 100mm ie overlap & 150mm end overlap, sealling all overlaps complete including treatment at all junctions & corners. The membrane shal be tucked into groove on vertical plane and groove sealed with cement mortar. The treatment shall be provided upto 200mm height above finished floor (Note- The membrane shall have tensile strength of 700N/5cm in longitudinal direction and 450N/5cm in transverse direction at 23 degree celcius, Flow resistance>120 degree celcius, dimensional stability, < 0.5% when tested as per ASTM D 5147. The laying of the membrane shall be done through authorized applicator of the manufacturers' (ii) Again applying hot bitumen 85/25 @ 1.2 Kg per Sqm over water proofing membrane (iii) Dusting dry sand @ 0.75 Kg per Sqm over the membrane indicated above
M&L for 15 mm thick Cement plaster on surfaces of concrete in CM 1:4 on roof surfaces mixed with WPC complete all as specified and dierected. Note : WPC shall be measured and paid separately
M&L for 15mm thick rendering in CM 1:4 on fair faces of brick wall surfaces, complete as specified directed
M&L for extra over rendering or plastering for work in isolated widths or in widths not forming part of general plastering such as in bands, sunk panels, cornices, skirtings, drip moulds and similar work exc 15 cm but n exc 30 cm in width or girth; including cutting to edges, all mi- tres and stopped ends, etc.
M & L for preparation of APP based polymeric membrane surfaces and applying bituminous based aluminium paint as per manufacturere's instructions.
M&L Water proofing treatment walls of bathroom consisting of the following operation :- (i) Cleaning of surfaces by wire brushing brooming removing dust particles (ii) Filling of all brick joints with cement mortar 1:4 (iii) Applying a coat of Chemical Dr fixit Pidi fin 2K (iv) applying fibe mesh setting with chemical Dr fixit Pidicrete URP (v) final coating with Pidifin 2K and sprinking of sand (vi) After the surface dried, plaster the surface with CM 1:4 15 mm thick . Note All water proofing treatment will be executed by the authorised representative of Dr fixit.
M&L Water proofing treatment on sunken floor consisting of the following operation :- (i) Cleaning of surfaces by wire brushing brooming removing dust particles (ii) M & L PCC 1:2:4 type (Bo) using 12.5 mm graded stone aggregate 50 mm thick, finishing the surface even and smooth without using extra cement (iii) Applying a coat of Chemical Dr fixit Pidi fin 2K (iv) applying fibe mesh setting with chemical Dr fixit Pidicrete URP (v) final coating with Pidifin 2K and sprinking of sand (vi) After the surface dried, screeding the surface with CM 1:4 15 mm thick including finishing even and smooth using extra cement. Note All water proofing treatment will be executed by the authorised representative of Dr fixit.
M & L for RCC nominal mix type B1 1:2:4 (using 20 mm graded aggregates) in slab supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like
Use and waste formwork to chullah hoods chajjas troughs and similar items including edges for fough finished surfaces of concrete
S&F solid PVC molded door frame of size 50mm x 95mm made out of 5 mm single side prelam PVC sheet complete all as specified and directed.
S&F Factory made solid PVC moulded door shutter with particle board core, 28 to 30 mm thick (stiles), with 2, 4 or 6 raised panel design with 2mm thick moulded prelam PVC sheet on the front face & 2mm plain colour PVC sheet on back face complete all as specified and directed.
S&F 150 mm long aluminium anodized barrel tower bolt of extruded section complete all as specified and directed
S&F 100mm long Aluminium butt hinges of extruded aluminium alloy with galvanized mild steel hinge , pin anodized complete all as specified
S & F aluminium bow handle,cast type,anodised 125mm long complete fixed with steel screws.
S&F Aluminium sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with & including a min of 6 bolts & nuts four on bolt plate & two on staple plate & fixed 250 mm long
M&L for cutting chases pinning in making good to facing where required for concealed water tubing and making good cutting not exc 10cm girth in brick walls complete.
S&F in repair bib taps 15mm bore, long body bib cock with wall flange, fancy type, brass chromium plated with capstan head/ever and cup, screwed for iron pipe or for brass ferrule including all accessories complete all as specified and directed.
S&F in repair 15mm Stop valves, fancy type, chromium plated with long shank and cup (concealed type) cast copper alloy, screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed
S&F in repair 15mm Stop/angle valves, cast copper alloy, fancy type, chromium plated, screwed down, high pressure, screwed both ends for iron pipe or for unions omplete.
S&F in repair fancy type brass chromium plated shower rose with arm complete
S&F in repair Brass chromium plated tubular towel rail 20mm dia fixed with screw to wall complete
S&F in repair vitrious china soap dish fixed to plugs with chromium plated brass screws complete
S&F in repair vitreous chaina squatting pan Orissa pattern size 580x440 white with integral foot rests (Excluding flushing cistern and flush pipe) complete all as specified and directed.
S&F in repair vitreous china wash down water closed pan (Pedestal pattern) with 'P' or 'S' trap white, including connection to trap and cistern, flush pipe including white plastic water closet seat cover, closed pattern with flat bottom & cover and aluminium anodised hinging device and making good disturbed surface of floor complete all as specified and directed.
S & F in repair vitreous China bowl urinals Half stall type, white with grating and unions for discharge pipe including providing and fixing plugs, bedding urinal against wall in CM 1:2 securing urinal to plugs with and including 60mm long brass screws pointing around urinal back in cement complete all as specified
S&F in repair sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60 cm long complete all as specified and directed
S&F, in repair PVC Flushing cistern 10 ltr capacity with inlet ball valve float and handle and 32mm bore flush pipe including bracket complete all as specified and directed.
S & F in repair PVC connection 15 mm bore, 600 mm long complete with both ends unions.
Demolition/taking down PVC/CI drain/Rain Water Pipe under floor or wall of internal dia 75/100 mm, set in cement mortar/ Bricket (working height not exc. 10 mtrs ) complete incl fittings.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 75mm bore complete.
S&F PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls 110 mm bore complete.
S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 75 mm bore complete.
S&F PVC (SWR) pipes, single socketed, in any length with rubber ring joints, laid in trenches or in floors, 110 mm bore complete.
S&F PVC (SWR) bends any radius, 75 mm bore, provided with access door complete.
S&F PVC (SWR) bends any radius, 110 mm bore, provided with access door complete.
S&F PVC (SWR) junction single (single T), equal or unequal, 75 mm bore, provided with access door complete.
S&F PVC (SWR) junction single (single T), equal or unequal, 110 mm bore, provided with access door complete.
S&F PVC (SWR) branch piece, double (double Y) equal or unequal, 110mm bore fixed to wall in west pipe
S&F PVC (SWR) vent cowl, 110 mm bore complete.
M&L in repair PVC (SWR) floor trap plain with grating in cluding jointing with solvent cement 75/100mm dia
Dismantling water storage tank exc 500 & n’ exc 1000 ltr capacity all as specified
S & F for 1000 ltr capacity rotational moulded polyethene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in position including tank nipple etc all as specified in SSR part I
S & F in repair vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete all as specified and directed.
S & F in repair Hot and Cold mixture pillar taps for WHB, cast copper alloy, with half/quarter turn swan neack, fancy type, chromium plated, screwed down high pressure, long screwed shanks and fly nuts, screwed for iron pipe 15 mm bore complete.
M&L for rendering 15mm thick in CM 1:4 on fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:6 on other fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed.
M&L for rendering 15mm thick in CM 1:6 on fair faces of brick work or concrete surface of wall and finished surface even and smooth without using extra cement complete all as specified and directed.
M&L for Rendering 10 mm thick in cement mortar 1:3 on concrete surfaces in ceiling, finished even & smooth without using extra cement complete
Supply only integral water proofing compound.
S&F in repair Stainless steel wire mesh 0.36 mmdia fixed with tinned tacks of stainless steel wire and avg width of aparture 1.4mm complete.
M&L for preparing new plastered or unplastered surfaces of wall and applying two coats of cement base paint complete all as specified
Material & labour for preparation of new plastered surfaces of wall and applying two coats of white wash complete.
M&L for Preparing new plastered or unplastered surfaces of ceiling and applying three coats of white wash complete.
M&L for preparing old plastered or unplastered surfaces of ceiling and applying one coats of white wash complete.
M&L for preparing old plastered or unplastered surfaces of wall and applying one coats of white wash complete.
M&L for preparation of old painted surface of wall including cornices etc. by washing, rubbing down and stopping of distempered and painting surfaces, and applying two coats of cement base paint of approved shade on old surface of wall complete all as specified and directed.
M&L for 18-20mm thick granite (of any type) stone slab work (table rubbed and polished) as wash hand basin laid over and including 20mm thick screed bed in cement mortar 1:6, set in white cement with pigment and pointed in white cement 1:2 using marble dust with admixture of pigment to match with shade including cutting granite slab circular or oval shape for fixing of vitreous china wash hand basin of desired size and shape including rubbing and polishing and making sandwitch moulding to edges complete all as specified and directed. Note - Breakage if any in granite slab will be born by the contractor).
S&F in repair vitreous china urinal partition white of size 310 x 770mm complete all as specified and directed.
S&F Steel ventilators, fixed type, with glazing bars complete all as specified and directed
S&F Steel windows with side hung shutters including projecting type hinges with steel handle, and steel peg stay, complete with glazing bars, dovetailed or welded complete all as specifeid and directed
S&F window guard bars, plain let in and fixed independently in wooden frames L or T section support for shelves etc., and similar articles conforming to Fe 410-0 or Fe 310-0 complete all as specified and directed
S & F 4 mm thick plain sheet glass pin headed and glazing with oil putty or wooden beads in square area n.exc. 0.5 Sqm in each pane complete.
M & L for two coats of Oil Bond Distemper over a priming coat on wall surfaces incl preperation of new plastered surfaces over wall care putty complete.
M & L for rendering cement plaster 5 mm thick on fair faces of ceiling in CM 1: 3 finished fair and even without using extra cement.
M & L for two coats of white wash on new surface of ceiling surfaces incl preperation of new surfaces complete.
M & L for two coats of OBD over a priming coat of on wall surfaces incl preperation of old wall surfaces with complete removal of existing treatment over a layer of wall care putty complete all as specified.
M & L for two coats of cement base paint on old surface of wall over a coat of cement primer incl preperation of old platered surfaces complete .
Demolition of Concrete in ground floors and pavings n exc 15 cm thickness (below or above ground level)
M & L for 1:3:6 cement conc in surface channel and drains using cement concrete type B2 40mm gde agg complete.
Extra for forming fair finished drain or channel 30 cm inner girth in CM using extra cement incl forming moulds ,mitered/stopped ends etc.
M & L for painting two coats of synthetic enamel on old wooden surfaces over a coat of pink primer of any description not otherwise described over 10 cm width or girth on new surfaces
Demolition of plain cement concrete in any position including Tar felt cement mortar bedding etc complete all as specified and directed
Complete Removal of mud phuska,from roof surface to a distance nexc 50 mtr and depositing where directed at a level not exc 1.5 mtr above the starting point complete all as specified and directed
Demolition of brickwork (laid flat or on edge) or brick tiles in floors,channels,kerbs,apron etc (each layer) laid bedded and pointed in any mortar in any poisition including bedding etc complete all as specified and directed.
M&L PCC 1:2:4 type B-0 (Using 12.50 mm graded stone aggregate) as in roof padding, benching existing roof slab laid to slope as per existing or as directed including finished surface even & fair complete all as specified and directed
M&L for cleaning the roof surface from dust/dirt and any other foreign materials and conforming to IS-3384-1986 applying a coat of bituminious primer @.40 litres per square meter uniformily after the surface fully dried complete all as specified and directed
M & L for Cutting chases,pinning in making good to facing in conrete n.exc 75mm wide and 65mm deep for tubing in water proofing felt where required and pointed in CM 1:3 and finishing complete in brick walls or concrete complete all as specified and directed.
M&L for 40mm thick brick tiles laid over15mm thick screed bed in CM 1:4 mixed with polymer based liquid water proofing compound and the joints of tiles shall be filled with CM 1:3 mixed with crude oil as per SSR-2009 (Part-I) After laying the brick tiles the work shall be cured with water by ponding complete all as specified and directed.
M&L for refixing of 40mm thick brick tiles laid over15mm thick screed bed in CM 1:4 mixed with polymer based liquid water proofing compound and the joints of tiles shall be filled with CM 1:3 mixed with crude oil as per SSR-2009 (Part-I) After laying the brick tiles the work shall be cured with water by ponding complete all as specified and directed.
S & F rotational moulded polythene water storage tank of capacity 1000 ltr (cylinderical / vertical with closed top) three layerconstruction hoisted and fixed in position including dismantling of old tank and removing from site,complete all as specified and directed.
S & F in repair ball / float valves high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed for 20 mm bore pipe minimum weight 210 gms, complet all as specified and directed.
M&L for 18 mm thick 100% Solid WPC (Wood Polymer Composite) Laminated Board of required size comprising of virgin PVC resin of K Valve 57-60 (Suspension Grade),Calcium Carbonate and natural fibers ( Wood powders/rice husk/Wheat husk) and non toxic additives, made from Extrusion process WPC foam sheet Single Extruded (Inner) with having minimum density not less than 650 kg/cbm having good screw holding capacity (Screw Withdrawal strength of 2000 N (Face) & 1100 N (Edge), Minimum Compressive of 50 N/mm2, Modulus of elasticity 850 N/mm2 and resistance of spread of flame of Class A category with property of being Termite/Borer Free, Water/Moisture Proof and Fire Retardant. WPC to be Laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter complete all as per specified and directed.Note : Material test certificate and authentication should be provided by the manufacturing company.
S&F of Stainless steel auto closing hinges openable at 0 degree for kitchen cabinet shutters complete all as per specified and directed. Make; ( Hettich, Ebco, Prime or Equivalent)
S&F of stainless steel handles 100 mm size for kitchen cabinet shutters complete all as per specified and directed. Make: ( Hettich, Ebco, Prime, Inox or Equivalent)
S & F of chrome plated stainless steel wire basket (storage basket) pull out type for large utensils size 8" with necessary fixing clips and channels etc. complete all as per specified and directed. Make: ( Hettich, Ebco, Prime, Inox or Equivalent)
S & F of chrome plated stainless steel wire basket (cup and saucer basket) pull out type, size 530 x 500 mm with necessary fixing clips etc. complete all as per specified and directed. Make: (Hettich, Ebco, Prime, Inox or Equivalent)
S & F of chrome plated stainless steel wire basket (Jar basket) pull out type, size 536 x 500 mm with necessary fixing clips etc. complete all as per specified and directed. Make: ( Hettich, Ebco, Prime, Inox)
S & F of chrome plated stainless steel wire basket (Thali basket) pull out type, size 380 x 500 mm with necessary fixing clips etc. complete all as per specified and directed. Make: ( Hettich, Ebco, Prime, Inox or Equivalent))
S & F ofchrome plated stainless steel wire basket (cutlery basket) pull out type, size 380 x 500 mm with necessary fixing clips etc. complete all as per specified and directed. Make: ( Hettich, Ebco, Prime, Inox or Equivalent)
S & F of chrome plated stainless steel wire basket (Grain Trolley) pull out type, size 380 x 500 mm with necessary sliding frame structure, fixing clips etc. complete all as per specified and directed. Make: ( Hettich, Ebco, Prime, Inox or Equivalent)
S & F of chrome plated stainless steel wire basket (storage / Plain basket) pull out type, size 380 x 500 mm with necessary fixing clips etc. complete all as per specified and directed. Make: ( Hettich, Ebco, Prime, Inox or Equivalent)
S & F of chrome plated stainless steel wire basket (Bottle pull out) pull out type, size 150 to 200 mm with necessary sliding frame structure, fixing clips etc. complete all as per specified and directed. Make: ( Hettich, Ebco, Prime, Inox or Equivalent)
Demoilition of RCC reinforced concrete of any description and in any position not otherwise specifically provided for
Taking down carefully point wiring of any type complete for light, fan socket or power point with fittings & fixtures such as ceiling rose, electric fittings, holders, switches, sockets, regulators, wooden batten, surface conduit/casing caping/conceal etc. removing materials including accessories for taking credit and making good disturbed surface to match the existing complete all as specified & directed.
M&L for point wiring with FRLS PVC insulated unsheathed stranded copper conductor cable 1.5 sqmm (nominal area) 1100 volts grade, along with one single run of same size and type of copper wire as continuous earth wire to common earth dolly drawn in and including non metallic PVC rigid, medium grade conceal conduit with all fixing accessories of 20mm dia, using new MS sunk terminal boxes of thickness not less 1.2mm, new 3mm thick laminated sheet cover with brass screw and cup washers with all acessories and making good to disturbed conceal surfaces complete all as specified and directed for the following :-
(a) One light/fan/bell point controlled by one switch
(b) One point for socket outlet 5 amps on independent board but below the switch board in same vertical /horizontal plane
(c) One point for socket outlet 5 amps on independent board but now below the switch board in same vertical /horizontal plane
(d) One point for socket outlet 5 amp same board
(f) One 3 pin 15 Amp socket outlet point controlled by one switch using 2.5 sqmm copper conductor cable with continuous earth wire of 2.5 sqmm copper conductor on independent board.
(g) One 3 pin 15 Amp socket outlet point controlled by one switch using 4.0 sqmm copper conductor cable with continuous earth wire of 4.0 sqmm copper conductor on independent board.
S&F switch piano flush type, 5 amps, 230V AC,single pole, one way complete all as specified & directed.
S&F socket out let 2-in-1, 3 pin, 5 amp flush type complete all as specified & directed.
S&F switch piano flush type 16 amps, 230V AC single pole one way complete all as specified & directed.
S&F socket out let 2-in-1, 3 pin, 5 & 15 amp flush type complete all as specified & directed.
S & F of Decorative ulta slim linear LED lighting fixture with co extruded polycarbonate body environnmental friendly , energy efficient tube light complete with all accessories internally pre-wired and including LED lamp 20 watt 01 No and connecting up with twin core twisted flexible copper conductor cable with suitable size complete all as specified.Make of LED lamp-Havells as per cat no or equivalent model of Bajaj/Philips/Surya/CG.
S&F Exhaust fan 300 mm sweep Metallic body Range complete and shutters including required length and size of copper stranded conductor for connection from ceiling rose to connector of fan with provn of making hole in wall complete with grouting of nuts, bolts and washers and all other accessories required for fixing of fan including testing on completion.Make , - Havells cat no :- Ventil Air -DX White White / Bajaj/Crompton
M&L for two single core (submain) FRLS PVC insulated cable and one single core green PVC insulated copper conductor earth continuity cable as mentioned below is drawn in and including non metallic, medium duty, rigid PVC conduit not less than 20 mm dia concealed in wall including all conduit and fixing accessories including cutting chases & making good to disturbed surfaces with cement mortar ratio of 1:4 and colour wash complete all as directed. Note :- (I) The cost for cutting, chases required shall deemed to be included in the quoted unit rate. (II) Two run of submain wire, one run of earth wire and one run of PVC conduit shall be measured one RM
(a ) 2x6.0 sq. mm + 1x4.0 sq. mm earth wire
(a) 2x4.0 sq. mm + 1x2.5 sq. mm earth wire
S&F flush type sheet metal enclosures double door type for MCB DB 8 Way SPN, 240V shutter with 200 Amp rated bus bar complete.
S&F MCB 6 to 32 Amps SP 240volts,repturing capacity 10KA complete.Make-Legrand(DX3) cat No 4085 90&4085 92 to4085 95)
S&F MCB SPN 240 Volts 40 to 63 Amp. Make-Legrand cat No 4086 18 to 20 or equivalent model of Schiender/Siemens.
M & L for earthing complete with galvanized steel earth plate electrode of 60 cm X 60 cm X 6 mm size, buried directly in ground (earth pit not less than 2.25 m deep below ground level) with top edge of the plate not less than 1.5 m below normal ground level, connected to galvanized strip of size 32 mm X 6 mm as earth lead by means of bolts, nuts, checknuts and washers of galvanized iron or steel, galvanized iron pipe of 40 mm diameter connected to earthing test point, all as shown in electrical plate No. 5, connected to earthing test point including testing on completion, excavation, earthwork, PCC earth pit of dimensions 550 mm X 550 mm (outer) and 300 mm X 300 mm (inner) and 250 mm deep with a 10 mm deep CI cover hinged to CI frame on ground level, GI watering pipe, funnel, etc. all as specified and directed by engineer- in - charge.
S&F in repair ceiling rose surface type bakelite 65x50mm three terminal complete all as specified and directed.
S&F angle/batten type holder insulated body with back plate suitable for light point complete all as specified and directed.
S&F fan regulator, 5 stepped, electronic type, single phase, 80 watt, socket size incl connection complete complete all as specified & directed.
S&F in replacement of sheet metal enclosure single pole and neutral enclosure with a two pin and earth plug and socket along with one MCB, single pole of current rating 20 amps, C series 240 volts AC complete all as specified & directed.
Taking down main switches fuse unit, MCB/Kit kat distribution board with steel enclosure along with MCB’s /Kit kat fuse of any amps/ways including wooden board or from steel board and making good disturbed surfaces complete all as specified & directed.
S&F sheet metal enclosure for MCB's 240 volt 8 way single pole and neutral with 200 amps rated bus bar, double door on wall with and including suitable flat iron clamps duly grouted/ fixed flush in the wall complete all as specified and directed.
S&F MCB single pole & neutral 40/63 amp, 240 volts, 'C' series, 10 KA breaking capacity & making connection complete all as specified and directed.
Taking down carefully sub main wiring of any nos of wire and size with earth wire on wooden batten/surface conduit/casing caping complete with its all accessories complete all as specified & directed.
Taking down existing old /worn out tube/CFL/bulk head/sketch light fittings of indoor type fixed on wall of any type/size with its all accessories including lamp complete all as specified & directed
Supply & fixing surface /wall mounted light fitting in CRCA powder coated white housing with pre wired suitable for single T8 LED tube along with supply and fixing one number LED tube in polycarbonate housing of nominal wattage - 18 Watt, Lumen out put - 2100 Lm, Colour Temp - 6500 Kelvin, Size & Length - G13/ T8/ 4 Feet with integral/in built driver, having short circuit and surge protection including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. Cat Part No for batten:- REGALBATTENT8UPTO1X18WDSBSWH of make Havells 'or' IGP161LT8-16 of make Crompton 'or' TMC501 P 1xT-LED 22W P3241 of make Philips or its equivalent as approved Cat Part No for Tubelight:- PHOTANULTRA2.01213T8SSTL18WLED865SPC of make Havells 'or' LTT8-20 of make Crompton 'or' MAS LEDtube 1200MM 18W865 T8 I-2100 lm of make Philips or its equivalent as approved
Supply & fixing energy efficient LED light of 10 Watt of length - 02 Feet long having minimum 1150 Lumen output, wide voltage protection range 140-270 Volt AC housed in extruded aluminum housing (enhances safety) with high quality polycarbonate diffuser including making connection with two core PVC insulated, sheathed copper conductor cable of size 23/0.0076 complete all as specified and directed. Cat part No: -LUMILINEPLUSSBS10WLED865SPCSS of make Havells 'or' BN 021 LED10S- 6500 PSU GR S1 of make Philips 'or' LDL-10-WW of make Crompton or its equivalent as approved
Supply and fix ceiling fans, complete with three blade, down rod, accessories 230V, 1200mm sweep, with Squirrel cage induction motor.
Supply and fix Water heater storage type, electric,capacity 25 litres.BEE 5 star rated
M&L for cutting & Chasing required on on brick wall, exceeding 20 CM girth and making good to disturbed surface with cement mortar 1:3 including facing / finishing where as required to match with existing surfaces to recess the MCB DB/sheet steel enclousure complete all as specified and directed.
M&L for cutting & chasing required not exceeding 10 CM girth for concealed conduit wiring and for GI earth wire including making good to disturbed surface with cement mortar 1:3 and distemper / colour wash to match with existing surfaces including facing / finishing where as required complete in all respect as specified and directed.
Supply & fixing Vertical type DB with Three phase & neutral MCB Distribution Box of 4 Way, double door of protection grade IP 43 in fine powder coated, matt finish with best CRCA sheet, fitted with shrouded neutral, insulated pin type copper bus bar, Din rail, earth bar confirming to IS 13032 & 8623 complete all as specified and directed. Make:Indo asian/ Havells/Hager or as approved
Supply & fixing MCB with high rating MCB Triple pole, 100 Amps 240 volts AC,'C' Series, conforming to IS 8828/IEC 60898-1 including making connections with copper lugs, testing as required complete all as specified and directed. Make - Havells/Indo Asian/Schneider (Electric)/HPL/Siemens /L&T or as approved.
Supply & fixing MCB with high rating MCB Triple pole & Neutral, 63 Amps 240 volts AC,'C' Series, conforming to IS 8828/IEC 60898-1 including making connections with copper lugs, testing as required complete all as specified and directed. Make - Havells/Indo Asian/Schneider (Electric)/HPL/Siemens /L&T or as approved.
Supply & laying cable XLPE Insulated screened PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor using lugs bothe end of cable& wrapping pvc tape over XLPE insulation cable and testing complete all as directed for Following size:(a) 50 Sq mm 3.5 core
Excavation in trenches in soft/ loose soil n.exc 1.5 m wide and n.exc. 1.5 mtr deep and getting out and laying LT UG Cable complete all as specified and directed .
Returning filling in with the soil obtained from item above here-in-before includiing spreading , leveling and well ramming in layers n.exc 25 cm thick complete all as specified and directed.
Removal of surplus excavated soil to a distance n.exc 50 mtr and depositing where directed at a level n.exc.1.5 mtr above starting point complete all as specified and directed
Supply and laying sub class 'B' brick old size laid flat in trenches across the length for protection of cable as cable cover complete all as specified and directed .
M& L for sand cushioning in trenches for protection of under ground cable provided in layers of sand as 8 cm before laying the cable and 15 cm deep after laying cable complete all as specified and directed.
S&F sheet metal enclosure for MCB's 240 volt 12 way single pole and neutral with 200 amps rated bus bar, double door on wall with and including suitable flat iron clamps duly grouted/ fixed flush in the wall complete all as specified and directed.
Supply & fixing in replacement of worn out/rusted sunken box with pressed MS/GI steel terminal boxes of depth not less than 50 mm, flush type of thickness lot less than 1.22 mm of following size alongwith new 3.0 mm thick plastic laminated sheet cover of suitable size including cutting/drilling hole and fixing switches, sockets, fan regulator etc as removed from old sheet and fitted with cadmium plated screw washer and making good to disturbed surface with cement mortar complete in all respect as specified and directed.
(i)100mm x 100mm
(ii) 175mm x 100mm
Supply and fixing LED street light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete.
S&F (in replacement) bracket for street light made out of 40 mm bore GI pipe medium grade not less than 1.2 mtr length bent at 120 degree to shape fixed on pole/wall with and including 50x6mm FI clamps = 02 Nos with nut bolts, washers including painting of clamps with two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
M/S Garg Sons
Channa Brothers and Co.
Raghvendra Enterprises
M/S CHANDRIKA PRASAD AND SONS
JMD Enterprises
YASH ENTERPRISES
ANAHITAS INFOSOLUTIONS PRIVATE LIMITED
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .