PROVISION OF 3 PHASE POWER SUPPLY TO KITCHEN EQUIPMENT AND POWER SOCKET IN DINING HALL AT KY MESS NEW KLP PH-I, PROVISION OF ELECTRICAL CONNECTION OF INDOOR REFLEX SHOOTING RANGE, COMBATFIRST AID CENTER WATER PIPE LINE CONNECTION EXCLUSIVELY

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in any type of soil, for foundation etc., or for laying of cable / GI Pipe, shafts, wells, cesspits, manholes, pier holes, etc., complete all as specified.

Excavation in trenches not exceeding 1.5m wide and not exceeding 10 Sq.m on plan area and not exceeding 1.5m deep in Hard / Dense Rock, for foundation etc., or for laying of cable / GI Pipe, shafts, wells, cesspits, manholes, pier holes, etc., complete all as specified. Note: Measurements for hard rock shall be as per Clause No. 3.1 of SSR Part-II and Hard Rock obtained from excavation shall be stacked neatly. Hard rock obtained from excavation shall become property of the contactor for which he will be charged @ Rs 800.00 per CuM. The measurement shall be stack measurement with 50% shall be deducted for voids.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm thick of excavated soil, as in any type of soil, complete all as specified. Note: A deduction of 10% shall be made from total computed volume of filling to cater in bulk irrespective of machinery used for ramming.

Removal of excavated material [Soil] to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point, complete all as specified.

Supply, laying, testing and commissioning of Galvanised steel water tubing 40mm bore, medium grade conforming to IS:1239 (Part I) including all fittings (such as bends, tees, short pieces connectors, elbows, reducers, unions, sockets etc), laid in trenches/drains, including testing, complete all as specified and as directed. Note: Necessary earth work will be measured and paid separately.

S&F Gun-metal, globe or gate valves, with iron wheel head, screwed both ends, suitable for iron pipe of 40mm bore dia of pipe with necessary GI fittings, complete all as specified and as directed.

M&L for Cutting existing DI /CI pipe 100mm bore dia, laid in position for taking out branch connection by inserting new tee, branches, collers etc., complete all as specified. Note: Quoted rate shall be inclusive of New CI/DI Fittings as required at site.

Supply, laying, testing and commissioning of LT XLPE insulated, screened with extruded PVC inner sheathed, PVC bedded, galvanised steel strip armoured electric power cable [heavy duty] of size 4.0core x 35.0Sqmm, with stranded aluminium conductor, 1100 volts grade, suitable for earthed system with and including cable glands, ferrules and connected accessories, laid in trenches or ducts or through the pipe etc., complete all as specified. Note: Necessary excavation & earth work, brick protection & sand cushioning shall be measured and paid separately under respective items.

Supply, laying, testing and commissioning of LT XLPE insulated, screened with extruded PVC inner sheathed, PVC bedded, galvanised steel strip armoured electric power cable [heavy duty] of size 4.0core x 25.0Sqmm, with stranded aluminium conductor, 1100 volts grade, suitable for earthed system with and including cable glands, ferrules and connected accessories, laid in trenches or ducts or through the pipe etc., complete all as specified. Note: Necessary excavation & earth work, brick protection & sand cushioning shall be measured and paid separately under respective items.

M&L for Cutting existing road for a width not exceeding 750mm and 1000mm deep for laying of water mains and filling back with excavated soil except road portion which shall be make good with 200mm thick cement concrete 1:2:4 type B1 (using 20 mm graded stone aggregate), with and including removing the rubbish outside MD land, complete all as specified and as directed.