CERTAIN REPAIR TO JOINERY CEILING FLOORING SANITARY AND CONNECTED ITEMS IN NFN NAD INS VAJRABAHU NSOD CNAI CCDT LWT WESTERN FLEET OFFICE FMU EMC AND OTHER AREA IN DOCKYARD UNDER AGE BR II UNDER GE NW KUNJALI COLABA MUMBAI

Amount

Resecuring and refixing in same opening without taking down of chowkats or frames with shutter n.exc 1.5 sqm each complete all as specified and as directed by Engineer-in-Charge.

Resecuring and refixing in same opening without taking down chowkats or frames with shutter exc 1.5 sqm but n.exc 4 sqm each complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkats or frames with shutter (Without taking off shutter from the frame) n.exc 1.5 sqm each complete all as specified and as directed by Engineer-in-Charge.

Taking down chowkats or frames with shutter exc 1.5sqm but n.exc 4 sqm each (without taking off shutter from the frame) complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any description exc 1 Sqm but n exc 2 sqm each complete all as specified and as directed by Engineer-in-Charge.

Taking down shutters of any description exc 2 Sqm each complete all as specified and as directed by Engineer-in-Charge.

Taking down aluminium door shutters and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beading & cleats and refixing the handles & mortice locks in existing position with new screws and refixing the door shutters in same opening complete all as specified and as directed by Engineer-in-Charge. Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same shall be measured and paid separately under relevant items.

Taking down aluminium windows shutters and dismantling all members and reassembling the same with and including new screws, new rubber gasket, new aluminium beading, cleats and refixing the locks & roller in existing position with and including new screws and refixing the window shutters in same opening complete all as specified and as directed by Engineer-in-Charge. Note : If broken or unserviceable glass/aluminium wire mesh/floor spring/concealed lock is replaced same shall be measured and paid separately under relevant items.

Supply and Fixing aluminium window, doors with shutters / frames / partitions made out of extruded powder coated aluminium sections, with sliding or openable shutters including frame & necessary joining cleats, glazing clip, powder coated aluminium snap beading, screws etc; including powder coated aluminium fittings such as cobra hinges, butt hinges, tower bolts hooks and eyes, peg stays and handles including connected items, with and including, making good to the disturbed portion with its original specification,complete all as specified and as directed by Engineer-in-Charge. Note: for Srl item No. 8.00 & 9.00 :- Minimum thickness of powder coating shall be 15 micron for windows and 25 microns for doors.

Supply and Fixing concealed star lock powder coated for aluminium window fixed as per manufacturers instructions complete all as specified and as directed by Engineer-in-Charge.

Hacking out old broken glass ( any thickness, size, quality or description ) from wooden or stone, concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for 4 mm thick plain sheet glass ordinary quality in squares n.exc 0.5 sqm in each pane fixed with rubber beading for aluminium windows/doors etc complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for 4 mm thick plain sheet glass ordinary quality in squares exc 0.5sqm in each pane fixed with rubber beading for aluminium windows/doors etc complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing Solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturer's instructions complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for 2nd class hard wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing factory made, 2nd class hard wood 35 mm thick, glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass/gauze complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing 40mm thick flush door shutters, solid core construction, with block board core and ply wood face panels, commercial type on both side complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing Solid PVC frame (Single Rebated) of size 60mm x 30mm made out of solid PVC foam with homogenous fine cellular structure having smooth outer integral skin with suitable metal stiffner and fixed with 100 x 8 sheet metal CSK screws complete all as specified and as shown on drawing complete all as specified and as directed by Engineer-in-Charge. (Note :- Door frame shall be water proof, termite proof, elegant and should have excellent screws holding strength to fix hinges and hold doors properly for a long life)

Supply and Fixing 30 mm thick moulded door shutter wood free consisting of frame made out of MS tubes of 19 gauge thickness and size of 20 mm x 40 mm for stiles as well as top, bottom material & lock rail. MS frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20 mm thick multichamber hollow PVC section of 1 mm wall thickness, bonded using solvent cement/cyanoacrylate adhesive with 5 mm thick moulded PVC sheet of density 600 Kg/Cum manufactured by an ISO - 9001-2015 certified company with 2, 4, 6 raised panel design in plain/prelam colours after routing the moulded design on one side of the inside panel 5mm plain /prelam PVC sheet to be pasted using solvent cement /cyanoacrylate adhesive on other side of the hollow PVC section. All the four edge of the panel to be sealed with lipping of 10 mm thick & 20 mm wide PVC sheet baton (made by sticking 2 Nos foam PVC sheets of 5 mm thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of plain/prelam moulded PVC sheet of door 20 mm thick (5 mm x 4 Nos ) thick PVC sheet to be given for lock provision at lock height . Door to be fixed with frame with 3 Nos stainless steel butt hinges of size 100 mm x 25 mm x 2 mm and 50 mm long steel screws drilled suitable to pass through both the walls of the MS tube other hardwares should be fixed with 20 mm x 8 mm size steel screws etc complete all as specified and as directed by Engineer-in-Charge and manufacturer's specification and drawing.

Supply and Fixing in repairs Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe), white, with and including P/S Trap (110mm bore), plastic water closet seat , closed pattern with flat bottom , complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs white vitreous china squatting pan, 'orissa' pattern, water closet of size 580x440mm with integral foot rest, P/S trap (110mm bore) etc and provn of lime concrete bedding, complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in repair health faucet ( Jet) 1 m long PVC tube with wall hook chromium plated fitted to stopcock 15 mm bore complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in repairs 10 litres capacity PVC low level flushing cistern syphonic action type, white with inlet, ball valve, float and handle including bracket complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in repairs white glazed earthen ware vitreous china Oval type wash hand basin of size 550x400 mm with and including CI brackets, and 32 mm bore brass CP waste coupling Inlet/ outlet PVC flexible pipe etc complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in repairs 15 mm bore , brass chromium plated fancy type bib tap complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in repairs 15mm size Stop Valves fancy type chromium plated screwed down high pressure with crutch or butterfly handle screwed both ends complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in repairs 15mm dia Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in repair 15 mm dia fancy type pillar tap cast copper alloy with capston heads chromium plated screwed down high pressure with or without hot or cold with long screws shanks and fly nuts screwed for iron pipes complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs vitreos china, western, single piece WC with UF Soft close slim seat cover with fixing accessories, set and cistern fitting including trap/connecting piece complete all as specified and as directed by Engineer-in-Charge. (Make-Jaquar/ Hindware/ Cera or as per equivalent make metioned in Appx 'B' of Particular Specifications )

Supply and Fixing in repairs wall hung WC with UF Soft close slim seat cover hinges, fixing accessories, accessories set including trap/connecting piece complete all as specified and as directed by Engineer-in-Charge. (Make-Jaquar/ Hindware/ Cera or as per equivalent make metioned in Appx 'B' of Particular Specifications )

Supply and Fixing in repairs single piece slim concealed cistern with wall mounting frame, installed kit and S-type drain pipe connection set for wall hung WC including accessories set a complete all as specified and as directed by Engineer-in-Charge. (Make-Jaquar/ Hindware/ Cera or as per equivalent make metioned in Appx 'B' of Particular Specifications )

Supply and Fixing in repairs towel ring square with round flange of (Jaquar Cat Pat No: CAN-CHR-1121N or as per equivalent make metioned in Appx 'B' of Particular Specifications) chromium plated, fancy type complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs CP towel rail 600 mm long with round flange complete all as specified and as directed by Engineer-in-Charge. Make: Jaquar Cat Pat No: ACN-CHR-1111 SM or as per equivalent make metioned in Appx 'B' of Particular Specifications

Supply and Fixing in repairs CP toilet roll holder with flap complete all as specified and as directed by Engineer-in-Charge. Make: Jaquar Cat Pat No: ACN-CHR-1153 S or as per equivalent make metioned in Appx 'B' of Particular Specifications

Supply and Fixing in repairs health faucet ABS Body with 8 mm dia 1 mtr flexible tube and wall hook complete all as specified and as directed by Engr-in-Charge. Make: Jaquar Cat Pat No: ALD-CHR-585 or as per equivalent make metioned in Appx 'B' of Particular Specifications

Supply and Fixing in repairs CP Pillar cock 15 mm bore with lift type operating knob and base flange complete all as specified and directed by Engr-in-Charge. Make: Jaquar Cat Pat No: FLR-CHR-595 or as per equivalent make metioned in Appx 'B' of Particular Specifications

Supply and Fixing in repairs CP bib cock 15 mm bore complete all as specified and as directed by Engr-in-Charge. Make: Jaquar Cat Pat No: CON-CHR-047KN or as per equivalent make metioned in Appx 'B' of Particular Specifications

Supply and Fixing in repairs CP angular stop cock with wall flange of 15 mm bore complete all as specified and directed by Engr-in-Charge. Make: Jaquar Cat Pat No: CQT-CHR-23059 or as per equivalent make metioned in Appx 'B' of Particular Specifications

Supply and Fixing in repair for urinal pot with sensor Size 370x390x610mm Star white (Senso Art) complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repair for Battery operated urinal sensor Flushing complete all as specified and directed by Engr-in-Charge ( Make-Hindware or as approved by GE)

Supply and Fixing overhead shower of 100 mm round shape single flow ( ABS Body chromium plated with gray face plate) with rubit cleaning system ( (Make - Jaquar/ Hindware/ Cera as approved by GE). complete all as specified and as directed by Engineer-in-Charge. Make: Jaquar Cat Pat No: OHS-CHR-1989 or as per equivalent make metioned in Appx 'B' of Particular Specifications

Supply and Fixing Corner glass shelf with brackets (Make - Jaquar/ Hindware/ Cera as approved by GE). complete all as specified and as directed by Engineer-in-Charge. Make: Jaquar Cat Pat No: ACN-CHR-1173 or as per equivalent make metioned in Appx 'B' of Particular Specifications

Supply and Fixing 600 mm glass self assembly fancy type with CP frame (Make - Jaquar/ Hindware/ Cera as approved by GE) fixed with chromium plated brass brackets and screw complete all as specified and as directed by Engr-in-Charge. Make: Jaquar Cat Pat No: AKN-CHR-35771P or as per equivalent make metioned in Appx 'B' of Particular Specifications

Material & Labour 32mm dia waste coupling of PTMT for glazed ware sinks, basin (half or full threaded) minimum weight 45 gms, complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing PVC connection on pipe 450mm long with brass nut bolt complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing PVC waste Flexible pipe 32mm dia 800mm long with socket suitable for WHB/Sink/urinal complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs 75mm dia of out let cast iron floor trap with grating including jointing to waste pipe in cement concrete tybe B-1 (1:2:4). complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing in repairs for vitreous china urinals, bowl type (back or corner wall type,) complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm long brass screws, pointing around urinal back in cement , fixing automatic flushing cisterns with brackets, flush pipes, inlet ,outlet etc complete all as specified and as directed by Engr-in-Charge..

Supply and Fixing in repairs vitreous china urinal, half stall type complete including providing and fixing plugs bedding urinal against wall in cement mortar in 1:2 securing urinals to plugs with and including 60 mm brass screws, pointing around urinal back in cement , flush pipes, inlet ,outlet etc complete all as specified and as directed by Engr-in-Charge.

Material & Labour in repairs for viterous china urinal partition white of size 310 x 700mm urinal partitions slabs, terminating about 40cm above floor, complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in repairs15 mm bore Brass CP mixer for mixing hot & cold water screwed dow for iron pipe, fixed as complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing in repairs two way CP bib cock 15 mm bore with wall flange complete all as specified and as directed by Engr-in-Charge

Material & Labour for providing cast iron soil & waste and vent spun pipes in any length with or without ears with cement joints laid in trenches of following size complete all as specified and directed by Engr-in-Charge. :-

75mm bore

100mm bore

Supply and Fixing in repairs rotational moulded polythene water storage tank of 1000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified in SSR Part I and as directed by Engr-in-Charge.

Supply and Fixing in repairs rotational moulded polythene water storage tank of 2000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified complete all as specified in SSR Part I all as specified and as directed by Engr-in-Charge.

Supply and Fixing in repairs rotational moulded polythene water storage tank of 5000 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I all as specified in SSR Part I complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing in repairs rotational moulded polythene water storage tank of 7500 ltrs capacity (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part I complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing in repairs sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing in repairs white glazed earthen ware vitreous china wash hand basin of size 630x450 mm with and including CI brackets, including 32mm bore brass CP waste coupling Inlet/ outlet PVC flexible pipe of length 600mm etc complete all as specified and directed by Engr-in-Charge.

Supply and Fixing under counter wash hand basin including chromium plated brass waste coupling and PVC waste pipe complete all as specified and as directed by Engineer-in-Charge. Make: Jaquar Cat Pat No: CNS-WHT-705 or as per equivalent make metioned in Appx 'B' of Particular Specifications

Supply and Fixing counter top wash hand basin including chromium plated brass waste coupling and PVC waste pipe complete all as specified and as directed by Engineer-in-Charge. Make: Jaquar Cat Pat No: ALS-WHT- 85601 or as per equivalent make metioned in Appx 'B' of Particular Specifications

Material & Labour in repairs for double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed by Engineer-in-Charge and as per manufacturer's instruction.

Supply and Fixing in repairs brass CP shower rose 125mm size complete all as specified and as directed by Engineer-in-Charge.

Taking up or down existing GI water tubing with all fittings of 15 mm bore complete all as specified and as directed by Engineer-in-Charge

Taking up or down existing GI water tubing with all fittings of 20 mm bore complete all as specified and as directed by Engineer-in-Charge

Supply and Fixing 15 mm bore GI tubing medium grade with all fittings like Tee, bend, elbow etc, fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing 20 mm bore GI tubing medium grade with all fittings like Tee, bend, elbow etc, fixed to walls and ceilings or laid in floors complete all as specified and directed by Engineer-in-Charge.

Supply and Fixing in repairs 160 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with and including suitable size GI clamps complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing 110 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with and including suitable size GI clampscomplete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing 75 mm dia PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall with and including suitable size GI clamps complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing PVC (SWR) bends any radius 160mm bore complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing PVC (SWR) bends any radius 110mm bore complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing PVC (SWR) bends any radius 75mm bore complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing in repairs aluminium anodised Deco grill 7.5 mm size DG-102, fixed to F/H frames, 1.5mm th, bar size 6.2mm and 7.5mm thick in required sizes complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing extruded aluminium alloy handles fabricated type anodized 150 mm size. complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing in repair extruded Brass handles fabricated type polished 125 mm size complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing in repairs extruded Brass handles fabricated type polished 150 mm size complete all as specified and as directed by Engr-in-Charge.

Material and labour for mild steel flat iron 25 x 3 mm as in hold fast or similar small articles conforming to Fe- 290 Grade-E-165 Complete all as specified and as directed by Engr-in-Charge.

Supply and Fixing in repairs aluminium (extruded section) body door closer hydraulically regulated, designation No.2, universal type, suitable for door shutter of 701 to 850 mm in width & of weight between 36 to 60 kg complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs 100mm size butt hinges extruded aluminium alloy with galvanized mild steel hinge pin anodised and fixed type C-21 complete all as specified and directed by Engr-in-charge.

Supply and Fixing in repairs 75 mm size butt hinges extruded aluminium alloy with galvanized mild steel hinge pin anodised and fixed type C-21 complete all as specified and directed by Engr-in-charge

Supply and Fixing 75 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and as directed by Engineer-in-Charge

Supply and Fixing 100 mm Butt hinges, cast brass, with mild steel hinge pin, bright polished and fixed, type B-11 complete all as specified and as directed by Engineer-in-Charge

Supply and Fixing in repair 200mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and as directed by Engineer-in-Charge

Supply and Fixing in repair 150mm long aluminium anodized barrel tower bolts of extruded sections complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs 300 mm long aluminium alloy, anodized sliding door bolts with hasp & staple (bolt type) and fixing clips of sheet cast of extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminium alloy a complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs 300 mm long Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts complete all as specified and as directed by Engineer-in-Charge

Supply and Fixing in repairs 200mm long brass barrel tower bolts of extruded sections as complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs 150 mm long brass barrel tower bolts of extruded sections complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs 140 mm long floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repair140 mm long floor door stopper of brass body and tongue, anodised with hard drawn steel spring fixed in floor complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs aluminium alloy wire cloth, 0.45mm dia of wire and average width of aperture 1.40mm and fixed with aluminium staples complete all as specified and as directed by Engineer-in-Charge.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed by Engineer-in-Charge

Material & Labour for POP false ceiling using 600 x 900 x 12 mm thick plaster of paris with gypsum binder sheet decorative type and necessary provision for concealed type light fittings, fixed on 22 gauge GI channel grid work main joist of size 50 x 25 mm spaced at 750 mm centre to centre, secondary joist of size 75x20 mm fixed to main joists spaced at 900 mm centre to centre suspended to roof members using 25 x 25 x 2 mm GI angles and fasteners @ 1.2 m C/C including decorative design/pattern as approved by GE complete all as specified and as directed by Engineer-in-Charge

Supply and Fixing Anodised aluminium snap grid size 605x605mm frame work for false ceiling complete all as specified and as directed by Engineer-in-Charge as per followind directions: (i) Aluminum sections incorporated in frame work shall conform to IS 733, IS 737 and IS 1285 (ii) The snap grid consist of anodized aluminium main/ cross tee of size as indicated. (iii) Snap grid framework shall be fixed to ceiling with supporting hangers consisting of 6 mm dia mild steel rod, J boltswith necessary bolts, nuts and washers all as manufacturer's instruction. (iv) The main and cross tees shall be jointed at junction/ crossings with anodized aluminium angle bracket of size as indicated, if not indicated it shall be 15 mm x 15 mm x 1.5 mm, weighing 0.12 Kg per running mere, fixed with suitable mild steel, bolts nuts and washers, all as per manufacturer's instructions. (v) The snap grid (main/ cross tee section) shall be supported at ends along the wall with anodized aluminium angle of size as indicated, if not indicated it shall be 40 mm x 25 x 2 mm, weighing 0.36 Kg/m. (vi) PVC protected sheeting shall be usedto avoid scratches, damage to the framework while fixing to ceiling

Supply and Fixing Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for 600x 600x 4 mm thick ( non asbestos fibre cement designer/coloured) ceiling board / tiles deep panel complete all as specified and as directed by Engineer-in-Charge

Dismantling floor hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed by Engineer-in-Charge

Material & Labour for (450mm x300mm ) x 7 mm thick coloured glazed ceramic tiles as in dado / vertical services set and jointed in neat cement paste and pointed in coloured cement to match the surface including 10 mm thick backing coat in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

Dismantling stone slabs and tiles laid bedded and pointed in any mortar of any description or thickness including removal of debries outside MoD land complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for 20-25mm thick, machine cut, Kota stone slab, as in floors, steps, landing etc. set and jointed in neat cement slurry and pointed in coloured cement to match the shade of slab, including cutting, polishing etc. with and including 20mm thick screed bed in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for machine cut kota stone slab 18 to 20 mm thick as in skirting/vertical surfaces jointed and pointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing, polishing laid over and including 15 mm thick backing coat in cement mortar 1:4 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 20 mm thick granite stone slab 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing types laid over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

Material and labour for 20mm thick granite stone slab machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing laid over and including 10 mm thick backing coat in CM 1:3 complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for Italian Marble stone 16/18 mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of Italian Marble stone including cutting and polishing laid over and including 15mm thick screed bed in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for Italian Marble stone 16/18 mm thick machine cut machine cut in skirting/dado laid over cement screed and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including cutting and polishing laid over and including 10 mm thick backing coat in CM 1:3 complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 60mm thickness M-35 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for machine pressed precast concrete inter locking paver block any shape and size confirming to IS-15658-2006 of 80mm thickness M-40 Grade, glossy finished of approved colour laid over and including 25 mm thick fine sand cushion to a line and slope etc and joined complete including spreading screened river sand over surface for filling the joints with rising surface vibrator etc complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for machine pressed cheqered cement coloured tiles of size 250mmx250mmx20mm thick mix with grey cement and pigment laid over 15mm thick screed bed in CM 1:4 set and jointed and pointed in neat cement slurry in floors complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing in repairs Wall paper of fibrious material, nonwoven Vinyl free, making them fixed to wall with dry strips or with approved adhesive complete all as specified and as directed by Engineer-in-Charge. (Note: Design & pattern as approved by GE).

Supply and Fixing in repairs Roller venetion blinds made out of standard cloth of approved texture with necessary accessories etc complete all as specified and as directed by Engineer-in-Charge.

Taking down cement plaster of any description hacking for key, raking out joints and scrubbing down with water etc to receive plaster and removing debris outside MoD land incl necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for Plastering 15mm thick in CM 1:6 on brick surfaces, finished with Neeru finish not less than 1 mm thick on walls complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for Plastering 5mm thick in CM 1:3 on concrete surfaces as in ceiling finished even & smooth without using extra cement complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for rendering 10 mm thick pre polymer modified ready mixed cement based plaster on chajja top and soffits Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a metallic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces incl using richer mix for making corners if necessary including making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required including curing required upto G plus 3rd floor bldg complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for rendering 20 mm thick pre polymer modified ready mixed cement based plaster in two coats 12 mm thick base coat and 8 mm thick finishing/final coat. Polymer modified ready mixed cement based plaster should having minimum composition of cement & sand 1:4 using fully treated dry, well graded natural sand conforming to IS-383 suitable for external plastering having low rebound properties, low water demand for curing properties, mechnical mixing with water in a metallic tray only to made good, consistency as per the specification of the manufacturer and applied over exterior masonry and concrete surfaces including using richer mix for making corners if necessary including making grooves of existing size and necessary two legged MS pipe scaffolding as wherever required including curing required upto G plus 3rd floor bldg complete all as specified and as directed by Engineer-in-Charge.

Material and Labour for complete removal of existing treatment of walls and applying two coats of acrylic (antifungal) exterior grade paint over one coat of primer on wall/roof including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for complete removal of existing treatment in ceiling surfaces and applying one coats of oil bound distemper over a coat of 2 mm thick wall care putty and primer. complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for preparation of new plastered surfaces of walls and applying two coats of acrylic (antifungal) exterior grade paint over one coat of primer necessary scaffolding upto G+8 storey bldg complete all as specified and directed by Engr-in-Charge.

Material & Labour for preparation of old plastered surfaces of walls and applying one coat of acrylic (antifungal) exterior grade paint over one coat of primer on including necessary scaffolding complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for complete removal of existing treatment on wall surfaces by scrapping, washing & rubbing down and applying one coats of oil bound distemper over a coat 2 mm thick wall care putty and primer including preparation of surfaces complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for preparation of new plastered surfaces of wall and applying two coat of oil bound distemper over a coat 2 mm thick wall care putty and primer complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for preparing old treated wood and wood based surfaces and applying one coat of varnishing over a coat of woodfiller transparent complete all as specified and directed by Engr-in-Charge.

Supply and Fixing in repairs door lock 7/8 mm inch mortice handle pair in black silver finish with legend 65 Brass dead bolt double action 6 Lever lock complete all as specified and directed by Engr-in-Charge.

Material & Labour for complete removal of existing treatment on steel surfaces and applying a coat epoxy putty/Metal putty 1 to 2mm thick on steel surfaces, and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed by Engr-in-Charge.

Supply and Fixing Prelaminated particle board, 19 mm thick exterior grade, prelaminated both side with decorative choice lamination , fixed with screws to timber/Aluminium frame work. complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing Prelaminated particle board, 9 mm thick exterior grade, prelaminated both side with decorative choice lamination , fixed with screws to timber/Aluminium frame work. complete all as specified and as directed by Engineer-in-Charge.

Dismantling plain or corrugated steel sheeting, any gauge or thickness including Nainital or similar pattern roof coverings complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

Supply and Fixing pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, chajjas, valley gutter, ridge and fixed with crumple joint etc fixed with self tapping screws complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for desilting and cleaning the septic tanks/manholes of any size/shape/depth by removing liquid, waste, night soil, sludge mechanically or manually with all necessary precaution as per rule in vouge including depositing the sludge by excavation with depth not less than 30cms with necessary arrangement to avoid odours such as refilling excavated earth on deposited sludge and removing surplus soil to a distance out side MoD area and deposited where directed complete all as specified and as directed by Engineer-in-Charge. Note :- For purpose of measurement and payment internal size of the tank upto liquid depth only shall be considered.

Cleaning to sewage pipe (SWG) systematically as directed by passing rope knots, bamboos etc of required size and shape and removing waste/sludge and depositing sludge as mentioned in item No. 135.00 herein before for the drain pipes of the following sizes:

Upto 150mm dia

Exceeding 150mm dia

Cleaning to toilets, bathrooms chockup systematically as directed by passing rope knots, bamboos etc of required size and shape and removing waste/sludge and depositing sludge as mentioned in item No. 135.00 herein before complete all as specified and directed by Engr-in-charge. Note :- For purpose of measurement and payment EACH TIME of the cleaning of chockup shall be considered.

Demolition of brick work/stone masonry built in cement mortar including all quoins, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles including coping complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for brick work with sub class B bricks straight or curved on plan to any radius built in CM 1:6 complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for brick work with sub class 'B' bricks , straight or curved on plan to any radius in half brick thick wall built in CM 1:4 complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:4 finished even and fair complete all as specified and as directed by Engineer-in-Charge.

Supply only Integral water proofing compound complete all as specified and as directed by Engineer-in-Charge.

Removing of debris/ bldg materials exc 5 KM but not exc 15 KM and deposited where directed outside MoD land complete all as specified and as directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for mild steel Roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc complete all as specified and as directed by Engineer-in-Charge.

Material & Labour for mild steel but MS Plate (Plain or Chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rolled mild steel sections of grade Fe 410-W (Gde-E-250) quality-A as in stairs (framed) including stringers, treads, landing, balusters, hand rails etc, including cleats, brackets etc. complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparation of newly plastered surfaces of ceiling and applying three coats of white wash on ceiling complete all as specified and as directed by Engineer-in-Charge.

MADHU ENTERPRIZES

SHRI SAI ENTERPRISES

Nilesh Construction

Sachin santosh dalvi

PRABHU ASSOCIATES

Garima Construction Co

SHREE JAGDISH FURNITURE CO.

RAJENDRA CONSTRUCTION