COMPREHENSIVE AND WELCOME MAINTENANCE OF BUILDINGS OF ARC AT HAPPY VALLEY UNDER GE SHILLONG.

Amount

M&L for preparation of old decorated plastered wall surface including washing, rubbing down and stopping by brooming down, scraping down smoke soot, moulds, moss and efforescent salts and trading oil and greasy spots and removing nails from wall surfaces etc. of distempered and painted surfaces on wall and applying One coat of distemper oil emulsion on wall including 1mm thick wall care putty to achieve smooth surfaces complete all as specified and as directed by Engineer-in-Charge.

M&L for preparation of old decorated plastered wall surface including washing, rubbing down and stopping by brooming down , scraping down smoke soot , moulds, moss and efforescent salts and trading oil and greasy spots and removing nails from wall surfaces etc. of distempered and painted surfaces on wall and applying Two coats of distemper oil emulsion on wall to achieve smooth surface without visible brush/hair mark complete all as specified and directed.

M&L for preparation of old decorated plastered surface including washing, rubbing down and stopping of distempered and painted surfaces of ceiling and applying One coat of acrylic distemper of ceiling complete all as specified and directed.

M&L for preparation of old wall surfaces with complete removal of existing treatment and applying 1mm thick wall care putty complete all as specified and directed.

M&L for preparation of Old Decorated plastered/ unplastered surfaces of wall and cornice by brooming down , scraping down smoke soot , moulds, moss and efforescent salts and applying one coats of white or tinned cement base paint after priming the surface with water complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of Old Decorated plastered/ unplastered surfaces of wall and cornice by brooming down , scraping down smoke soot , moulds, moss and efforescent salts and applying one coats of white wash after priming the surface with water complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of old decorated plastered surfaces of ceiling including cornices, plasters etc and applying One coat of white wash complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted wooden surfaces of any description n.exc 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted steel surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L French polish, one coat over old wooden painted surfaces of any description over 10 Cm width or girth including necessary preparation of old surfaces with a coat of wood filler with two or more coats complete all as specified and as directed.

M&L for Anti corrosive super synthetic enamel roof paint, one coat over old painted surfaces of CGI/PGI roof sheet including necessary preparation of steel surfaces complete all as specified and as directed.

M&L for Non-skid ceramic colour tiles 7 to 8 mm thick, (square/ rectangular), area of each tiles exceeding 0.06 Sqm but not exceeding 0.11 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 including dismantling floor/ hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and as directed.

M&L for Non-skid ceramic colour tiles 7 to 8 mm thick, (square/ rectangular), area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of the tiles over and including 15 mm thick screed bed in cement sand mortar 1:4 including dismantling floor/ hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and as directed.

M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 including dismantling floor/ hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and as directed by Engr-in-charge.

M&L for light shade vitrified ceramic tiles 10 mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 Sqm, in vertical surfaces such as dado, skirting and riser etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed in CM 1:4 including dismantling floor/ hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete all as specified and as directed by Engr-in-charge.

M&L for Glazed ceramic colour tiles of size 450 x 300 x 7mm thick in vertical surfaces of wall such as skirting , dado, riser etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 including dismantling floor/ hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete as specified and directed.

M&L for Glazed ceramic colour tiles of size 300 x 200 x 7mm thick in vertical surfaces of wall such as skirting , dado, riser etc set and jointed with neat cement slurry and pointed in white or colour cement to match with the colour of tile over and including 10 mm thick backing course in cement sand mortar 1:4 including dismantling floor/ hearth or wall tilling including cement mortar bedding but not backing removing serviceable tiles to store and rubbish off premises complete as specified and directed.

Demolition of stone slabs and granite laid, bedded and pointed in any mortar of any description or thickness in floors, appron, cill or platform etc. complete, all as specified and as directed.

M&L for Granite (of any type) tiles 18/20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone including grinding and polishing including and over 15 mm thick screed bed or bedding in layer in cement sand mortar 1:4, laying floor finishes finished fair and even complete as specified and directed.

M&L for rounding to edges of stone slabs one edge, such as in steps, cooking platform and other similar situation, complete as specified and directed.

Taking down of cement plaster on brick or concrete surfaces including racking out joints, hacking for keys, scrubbing down with water etc complete including removal rubbish off premises all as specified and directed.

M&L for Rendering 10mm thick plaster on fair faces of brick work or concrete surfaces in cement sand mortar (1:6) finished even and smooth without using extra cement complete all as specified and directed.

M&L for Rendering 5mm thick plaster on ceilling in cement sand mortar (1:3) finished even and smooth without using extra cement complete all as specified and directed.

M&L Block masonry with solid precast cement concrete blocks made out of cement concrete 1:3:6 type C1, using 20 mm graded stone aggregate, exc 10 Cm width and setting in cement sand mortar 1:6 including demolition of brick or stone boulder masonry, precast concrete block walling in any position built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L for preparation of new plastered surfaces of wall and applying two coats of white or tinned cement base paint after priming the surface with water complete all as specified and directed by Engineer-in-Charge.

M&L for preparation of newly plastered surface of ceiling and applying two coats of white wash complete all as specified and as directed by Engineer-in-Charge.

S&F 0.63 mm thick galvanised corrugated iron (CGI) sheeting with two corrugation side lap, sheets having ZInc coating @120 gram/Sqm inclusive both sides, fixed with GI coach screws/ 'J' type hook or 'L' type hook and washers as in roof covering etcincluding dismantling any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed complete all as specified and directed.

S&F 0.63 mm thick plain galvanised iron (PGI) sheets having ZInc coating @120 gram/Sqm inclusive both sides as in ridges, hips, valley gutter, drip, straight flashing etc, fixed in any pattern with coach screws or self tapping screws including dismantling any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed complete all as specified and directed.

Dismantling timber scantlings in fillets, rails, posts, rafters, purlins etc. under 40sqcm in section of unframed work complete all as specified and as directed.

M&L for 2nd class hard wood Plain fillets bullnosed,splayed, chamfered or rounded on one edge or face in section clean sawn, fixed with screws, sectional area exc 3Sqcm but n.exc 6Sqcm complete all as specified and as directed.

M&L for 2nd class hard wood Plain fillets square, rectangular or triangular in section , clean sawn, secured with nails or beads, sectional area exc 13Sqcm but n.exc 25Sqcm complete all as specified and as directed.

M&L for 2nd class hard wood Plain fillets bullnosed,splayed, chamfered or rounded on one edge or face in section clean sawn, fixed with screws, sectional area exc 6Sqcm but n.exc 13Sqcm complete all as specified and as directed.

S&F 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/ GI/ Aluminium framework with nails as in ceiling, including dismantling wall and ceilling boards of any description insulation boards/ slab/blankets, any thickness including cover fillets complete all as specified and directed.

M&L for 2nd class hard wood, 20 mm thick boarding, planed one side with butt joints fixed with nails as in eaves board including dismantling of boarding of any description complete all as specified and directed.

M&L for 2nd class hard wood, 30 mm thick boarding, planed one side with butt joints fixed with nails as in boarding in floors and skirting etc. including dismantling of boarding of any description complete all as specified and directed.

M&L for 2nd class hard wood in scantling, clean sawn, timber fixed with nails including dismantling of timber scantling over 40 Sqcm in section in any position (unframed work) complete all as specified and as directed.

S & F in repair 110mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls/ Floors including pvc clamps for securing pipe etc complete all as specified and directed.

S & F in repair 75mm bore PVC (SWR) pipe single socketed, in any length with rubber ring joint fixed to walls/ Floor including pvc clamps for securing pipe etc complete all as specified and directed.

S & F in repair 110 mm bore PVC (SWR) branch piece, single (Single 'Y' or 'T') equal or unequal complete all as specified and directed.

S & F in repair 110mm bore PVC (SWR) reducer complete all as specified and directed.

S & F in repair 110mm bore PVC (SWR) bend with access door of any radius jointed with solvent cement and rubber ring joint fixed, complete all as specified and directed.

S & F in repair 75mm bore PVC (SWR) bend with access door of any radius jointed with solvent cement and rubber ring joint fixed, complete all as specified and directed.

S & F in repair 75mm bore PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and directed.

S&F GI tubing15mm dia medium grade with all fittings fixed in wall, ceiling or laid under floor floor with necessary clamp or hook including Taking up or down steel tubing with connections of 15mm bore pipe including cleaning for refixing or removal from site with all fittings complete all as specified and as directed.

Refixing only GI tubing 15 mm dia medium grade with all fittings fixed in wall, ceiling or laid under floor with necessary clamp or hook with all fittings complete all as specified and as directed.

S&F GI tubing 20 mm dia medium grade with all fittings fixed in wall, ceiling or laid under floor floor with necessary clamp or hook including Taking up or down steel tubing with connections of 20 mm bore pipe including cleaning for refixing or removal from site with all fittings complete all as specified and as directed.

Refixing only GI tubing 20 mm dia medium grade with all fittings fixed in wall, ceiling or laid under floor floor with necessary clamp or hook with all fittings complete all as specified and as directed.

M&L for cutting chases, of girth not exceeding 10cm for concealed water tubing or concealed conduit wiring etc, in stone/ brick masonry wall built in cement mortar and making good, disturbed surface in cement mortar 1:3 complete all as specified and as directed.

S&F Rotational moulded HDPE polyethylene 500 ltrs capacity water storage tanks three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position in SSR 2009 Part-I including ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball including 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end including dismantling old unserviceable one complete all as specified and directed.

S&F Rotational moulded polyethylene 1000 ltrs capacity water storage tanks , three layered, (ISI marked) (cylindrical vertical with closed top) hoisted and fixed in position in SSR Part-I including ball valves 20mm dia high pressure of PTMT with epoxy coated aluminium rod & high-density plastic ball including 20mm dia GI medium grade over flow pipe, approx lenght 1.5 mtr, 25 mm dia wash out pipe with pluged at one end including dismantling old unserviceable one complete all as specified and directed.

S&F in repair 20 mm dia ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20mm - 21 0gms) complete all as specified and directed.

S & F in repair 15 mm bore CP fancy type bib tap chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F in repair 15mm bore stop cock fancy type, chromium plated , screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed.

S&F in repair 15mm bore angular stop cock fancy type, chromium plated , screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed complete all as specified and directed. Make: Hindware Cat Part No. F200005 equivalent series in KOHLER/ ROCA/ JAQUAR.

S&F in repair Bib tap of 15mm dia in PTMT of any colour high pressure screwed for iron pipe and fixed. (Minimum weight 90 gms) complete all as specified and as directed. Make:- Prayag / Hindware/ ESSCO/PARCO

S&F in repair Stop Valve of 15mm dia in PTMT of any colour high pressure screwed for iron pipe and fixed. (Minimum weight 90 gms) complete all as specified and as directed. Make:- Prayag / Hindware/ ESSCO/PARCO

S&F in repair Pillar tap,15 mm bore, brass chromium plated, screwed down, high pressure with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe complete all as specified and directed by Engr-in-Charge.

S&F in repairs Nozzle cock for washing machine 15mm bore, cast copper alloy with crutch or butterfly handle, fancy type, chromium plated, screwed down, high pressure, screwed for iron pipe or brass ferrule and fixed complete all as specified and as directed. Make:- Plumber Cat Part No EC-0215 equivalent series in Jaquar/ Kohler/ Roca

S&F in repair 2-way bib tap,15 mm bore, brass chromium plated, with capstan head screwed down, high pressure, screwed for iron pipe complete all as specified and directed by Engr-in-Charge. Make:- Jaquar Cat No FLR- 5041N equivalent series in KOHLER/ Roca

S & F in repair 15 mm bore CP fancy type bib cock with wall flange body, chromium plated crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed. Make:- Hindware, Cat part No F200011 or equivalent in Prayag / Jaquar/ Parryware.

S & F in repairs 450 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.

S & F in repairs 600 mm long PVC connection with two Nos. PTMT nuts internally threaded and PVC washer suitable for 15 mm bore pipe line complete all as specified and directed.

S & F in repair 600mm long PVC flexible waste pipe 32mm dia internally threaded and PVC washer suitable for fixed to Wash Hand Basin, Urinal Bowl and Kitchen Sink, complete all as specified and directed.

S&F in repairs sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915 x 460mm bowl size 410 x 330 x 160 mm complete all as specified and directed.

S&F in repair stainless steel kitchen rack including fixing cantilever brackets or fixed to wall with wall plug, screws and washers, overall size 900 x 900 x 250 mm complete all as specified and directed. Make: Prayag Cat Part No. P-348 or equivalent make of Hindware/ Bluestar.

S&F in repair PVC (Plastic polymer Cistern) valve less, Symphonic action type, flushing cistern of capacity 10 litres, low level, white with inlet, ball valve, manually operated with one PVC ball valve horizontal plunger type including provision of 32mm PVC flush pipe of required length and making connections complete all as directed by Engineer-in-Charge. Make:- Prayag / Hindware/ Parryware

S&F in repair vitreous China wash down (EWC) water closet pan (pedestal pattern), white (excluding flushing cistern and flush pipe) but including plastic water closet seat cover closed pattern with flat bottom and cover with PVC hinge device, fixing bolt for pedestal pattern complete all as specfied and directed. Make:- Prayag / Cera / Hindware.

S&F in repair Vitreous china squatting pan of Orissa Pattern of size 580x 440 mm white with ‘P’ or ‘S’ trap , front or back inlet but excluding flushing cistern and flush pipe including placing in position in floor and embedded in cushion of PCC type E2 ( using 40 mm graded crushed stone aggregates), 1:5:10 and finishing the top surfaces to match with the existing flooring complete all as specified and as directed .Make:- Prayag / Cera / Hindware.

S&F in repair Health Faucet (ABS) with 1.25 mtr PVC easy flex tube in chrome finish & ABS wall hook complete all as specified and directed. Make: Hindware Cat part no. F160027 or equivalent make of Prayag / Kohler/ Roca

Supply only PVC syphon Kit suitable for low level flushing Cistern complete all as specified and directed.

S&F in repair stainless steel decorative pattern holder/ End brackets suitable for drapery rod of 25mm dia fixed with screws to match the color, complete all as specified and directed.

S&F in repair stainless steel decorative pattern End Support with screw to hold the 25mm dia drapery rod in position fixed with screws to match the color, complete all as specified and directed.

S&F in repairs 25 mm dia drapery rod, stainless steel, not less than 1mm thick cut to size with & including suitable fixing CP brackets / clamps & corners to be fixed at ends etc. with necessary screws complete all as specified and directed.

S&F in repair Vitreous china wash hand basin, white, flat back of size 550 mm x 400 mm including bracket, cutting for and pinning the ends of brackets or erecting stands also including brass chromium plated waste coupling 32mm dia, PVC flexible waste pipe of adequate length and dia and PVC connection 15mm size 450mm length with PTMT nuts, complete all as specified and as directed .Make:- Prayag / Hindware/ Jaquar & Company Pvt Ltd/ Cera (Ist Quality)/ Parryware

S&F in repair vitreous China rimless single piece WC wash down water closet pan of size 390mm X 710mm X 710mm closed pattern including UF soft close seat cover, with PVC hinge device and flushing cistern with all accessories set, P trap 180mm, fixing bolt to fixed on wall complete all as specfied and directed. Make:- Jaquar Cat Part No. VGS-WHT-81851PN or equivalent make from Cera / Hindware/ Parryware.

S&F in repair towel rail, 20 mm (minimum) dia & 600 mm long of brass chromium plated, fixed with and including chromium plated brass screws and wooden/ plastic cleat complete all as specified and directed.

S&F in repair 15 mm bore brass CP wall mixer for mixing hot and cold water, fancy type, down, screwed for iron pipe or for brass ferrule complete all as specified and directed.

S&F vittreous China Toilet paper Holder, box type fixed on walls with chromium plated brass screws etc complete all as specified and as directed by Engineer-in-Charge.

S&F in repairs sheet glass shelf assembly consisting of 5.5 mm thick sheet glass shelf, size not less than 120 mm wide & 600 mm long, with chromium plated bracket guard and railing complete all as specified and directed.

S&F in repairs corner glass shelf assembly consisting of 5.5 mm thick sheet glass shelf, 300mm side with brass chromium plate bracket guard complete all as specified and directed. Make: Jaquar Cat Part No. ACN-1173 or equivalent make from Prayag / Kohler/ Roca

S&F in repair plastic water closet seat, white, closed pattern hydraulic seat cover for wall hung water closet complete all as directed by Engr-in-Charge. Make:- Jaquar Cat No.CNS-WHT-WCS1 or equivalent series in Kohler/ Roca

Taking down chowkhat with shutter (without taking off shutter from the frame) and area not exc 1.50sqm each and removing from site of work complete, all as specified and directed by Engr-in-charge.

Taking down chowkhat with shutter (without taking off shutter from the frame) and area exc 1.50sqm but not exc 4.0sqm each and removing from site of work complete, all as specified and directed by Engr-in-charge.

Taking down shutters of any description not exc 1.0sqm each and removing from site of work complete, all as specified and directed by Engr-in-charge.

Taking down shutters of any description exc 1.0sqm but n.exc 2.0sqm each and removing from site of work complete, all as specified and directed by Engr-in-charge.

S&F 2nd class hard wood plain, solid, straight chawkhats and frames, wrought, framed, rebated on the solid rounded or chamfered, put together with glue pinned at joints complete all as specified and directed by Engr-in-charge.

S&F 35 mm thick, 2nd class hard wood, glazed and skeleton shutter, open rebated and prepared to receive glass or gauge without sash bars , divided in to squares and edges of framing plain chamfered or rounded, fitted with cut or mitred beads for securing glass or gauge etc as specified in SSR Part-I section 8 clause 8.24 (a) complete all as specified and directed.

S&F 30mm thick 2nd class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass or gauge etc size of member of shutters as specified in SSR Pt-I section 8, Clause 8.24(a) supplied and fitted to chowkats etc complete all as specified and directed by Engr-in-charge.

S&F 30mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides conforming to IS-2202 (Part-I), 1983 complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30 mm thick (style) considering of frame made out of MS tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rails, lock rail & bottom rails on either side & as gap insert for top rail & bottom rail, Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and jointed togeather with solvent cement, fixing in the frame at site complete all as specified and directed by Engr-in-charge.

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm plain colour PVC sheet reinforcement with M.S square tube, supplying & fixing in openings as per specification complete all as specified and directed by Engr-in-charge.

S&F Anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified and upto the entire satisfaction of Engineer in charge.

S&F Anodised aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips,rubber packing, anodised aluminium snap beading, screws etc. complete all as specified and upto the entire satisfaction of Engineer in charge.

S&F Anodised aluminium frame for doors,windows, ventilators, with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

S&F in repairs door closer hydraulically regulated aluminium (die cast) body, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and directed. Make :- Hardwyn / Godrej / Doorset

S&F 5mm thick mild steel Flat as hold fast and similar small articles conforming to Fe-290 Gde-E-165 etc complete all as specified and as directed.

M&L PCC 1:3:6 type C1 (using 20 mm graded crushed stone aggregate) as in bed plates, filling in pressed steel door frames, hold fast blocks etc, complete all as specified and directed.

S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 100mm, ISI Marked,complete all as specified and directed by Engr-in-charge.

S&F 150 mm long extruded Aluminium anodised handles fabricated type and fixed complete all as specified and directed.

S&F aluminium anodised barrel tower bolts and fixed of 150mm length, ISI marked complete all as specified and directed by Engr-in-charge.

S&F Butt hinges, medium weight, cold rolled mild steel, size of hinges 75mm, ISI Marked, complete all as specified and directed by Engr-in-charge.

S&F tower bolts, mild steel, 150mm size, barrel type of stone enameled black with bright bolt, ISI marked, complete all as specified and as directed.

S&F tower bolts, mild steel, 100mm size, barrel type of stone enameled black with bright bolt, ISI marked, complete all as specified and as directed.

S&F 150mm size MS pressed handle oval type stove enamelled black, ISI marked, complete all as specified and directed.

S&F 100mm size MS pressed handle oval type stove enamelled black, ISI marked, complete all as specified and directed.

S&F 75mm hasp and staple, safety type, aluminium anodized with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

S&F in repairs 250mm long Mild steel sliding door bolt, plate type stove enamelled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolt plate and two on staple plate ISI marked, complete all as specified and directed.

S&F in repairs GI mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed

S&F GI mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed

Hacking out old broken glass (any thickness size quality or description) from wooden pane glazed with putty or fixed with wooden bends complete all as specified and directed.

S&F 3mm thick sheet glass ordinary quality & glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane complete all as specified and directed.

S&F 3mm thick glass one side frosted, glazing with oil putty or fitted with beads in squares n.exc. 0.50 sqm in each pane including fixed with wooden beads / glazing pins or spring clips in wooden or metal frames complete all as specified and directed.

S&F 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&Fin repair 140 mm floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor complete all as specified and directed.

S&F in repair 300 mm, ordinary mild steel rat tail rod pattern with helical door springs and including roller and roller plate complete all as specified and directed.

Labour only for Resecuring or easing & adjusting shutter without taking down, of any description including all builders hardware of size exc 1 Sqm but n.exc 2 Sqm each etc complete all as specified and as directed.

M&L for preparation of wood or wood based materials new surfaces of any description and girth over 10cm otherwise described and applying two coats synthetic enamel paints over a coat of pink primer complete all as specified and directed by Engr-in-charge.

S&F in repair 18/ 19mm thick particle board for insulation purposes, fixed with nails to timber framework complete all as specfied and as directed.

S&F in repair 12mm thick ply wood (7 Nos Ply), type BB(with BWR) complete all as specified and as directed.

S&F 4mm thick (03 Nos ply) Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one faces; fixed with screws to timber frame work complete all as specified and as directed.

M&L for 2nd class hard wood Plain fillets bullnosed,splayed, chamfered or rounded on one edge or face in section clean sawn, fixed with screws, sectional area nexc 3Sqcm complete all as specified and as directed.

S&Fin repair continuous (piano) hinges, mild steel, bright finish or electrogalvanised, width of flaps (when open) 40mm, complete all as specified and directed.

S&F Magnetic Catcher and connected plate to shutters and frame fixed in position complete all as specified and directed by Engr-in-charge.

M&L for cement mortar 1:6 for forming jambs, etc. to openings including cutting, toothing and properly bonding into old work, also facing, jointing and pointing to match existing work, complete, all as specified and directed by Engr-in-charge.

Taking down carefully copper/aluminium point wiring (light, fan, socket or power) complete including all fittings and fixtures such as switches, lamp holder, regulator, switch socket outlet, bulk head fittings tube light fittings etc and making good disturbed surfaces of walls with cement mortar and white/colour wash to match with existing surfaces etc complete all as specified and directed by Engr-in-charge.

Material & Labour for Point wiring with two single core 1.5 sqmm (nominal area), FRLSH, ISI marked PVC Insulated unsheathed multistranded copper cable, 1100 volts grade including PVC Casing capping (medium grade) of suitable size with all fittings and accessories including PVC rectangular board of suitable size, and FRLSH, ISI marked PVC insulated unsheathed single core multistranded copper cable of size 1.5 sqmm green in colour as earth continuity conductor connected to common earth dolly for one light/fan point controlled by one way switch complete all as specified and directed by Engr-in-charge. Make- Cable- Finolex/RR Kabel/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga.

All as per Item No. 128 here-in-before but for one 2/3 pin socket outlet, 5 Amps on independent board, complete all as specified and directed by Engr-in-charge. Make- Cable- Finolex/RR Kabel/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga.

All as per Item No. 128 here-in-before but for one 2/3 pin socket outlet, 5 Amps on same board complete all as specified and directed by Engr-in-charge. Make- Cable- Finolex/RR kabel/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga.

All as per Item No. 128 here-in-before but with FRLSH, ISI marked PVC insulated and unsheathed two single core multistranded copper cable of size 4.0 sqmm for one power point ,3 pin 15 Amps on independent board includingFRLSH, ISI marked PVC insulated unsheathed single core multi-stranded copper cable of size 4.0 sqmm green in colour as earth continuity conductor connected to common earth dolly complete all as specified and directed by Engr-in-charge. Make- Cable- Finolex/RR Kabel/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga.

All as per Item No. 128 here-in-before but for one call bell point controlled by one push button switch, complete all as specified and directed by Engr-in-charge. Make- Cable- Finolex/RR Kabel/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga.

Supply and fixing call bell ding dong, AC, 230 V, Single pole ISI marked all as specified and directed. Make- Havells/anchor/ Legrand.

Supply and fix bell push, piano type, 6 A, single pole, 230 V, ISI marked all as specified and directed by Engr-in-charge. Make- Havells/anchor/ Legrand.

Supply and fix switch piano (ISI marked) Single pole 240 volts, 5Amps all as specified and directed by Engr-in-charge. Make- Havells/anchor/ Legrand.

Supply and fix socket outlet (ISI marked), 2/3 pin and 5 Amps, 240 volts, complete all as specified and directed by Engr-in-charge. Make- Havells/anchor/ Legrand.

Supply and fix switch socket combination (ISI marked) 2/3 pin and 5 Amps, flush type, 240 volts complete all as specified and as directed by Engr-in-charge. Make- Havells/anchor/ Legrand.

Supply and fix switch socket combination (ISI marked) 2/3 pin and 15 Amps, flush type, 240 volts complete all as specified and directed by Engr-in-charge. Make- Havells/anchor/ Legrand.

Supply and fixing LED batten fittings 1x18 Watt complete pre wired fixed to wall with 2 nos PVC block of suitable size make Havells Cat no LHEXACP7PN1W018 or PHILIPS Model no DX18 UJJWAL or Crompton cat no LCTL 18 CDL including taking down old unserviceable one .

S & F wall mounted LED batten fittings with all accessories 1X 10 Watt LED , extruded polycarbonate, integrated electronic driver and fixed to wall with 2 Nos PVC block suitable size complete all as specified and as directed including taking down old unserviceable light fittings. Make - Havells Cat no LHEXACP7IN1W010 or Crompton cat no LCTL 10 CDL or equivalent inPhilips

S&F lamp holder, insulated body, with back plate for batten fitting complete. Make- Havells/anchor/Legrand.

M&L ceiling rose, 3 terminals PVC/ polycarbonate, isolated body complete all as specified and directed. Make - Havells /anchor/ Legrand.

Fixing only serviceable Ceiling rose, 3 terminals PVC / polycarbonate, isolated body etc with new SS screws complete all as specified and directed. (Note:- Old serviceable Ceiling rose obtained from taking down of point wirings carried out against srl item no. 127.00 shall be refixed / reused under this item)

Supply and fix in repairs MCCB Distribution board, VTP&N , loadline , double door, ,sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link,415 Volts 4 way fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. Make: Havells Cat part No DHDLVDRWGOFO04 or equivalent in Legrand/Schnieder/GE/C&S.

Supply and fix in repairs MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 12 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW12 or equivalent in Legrand/Schnieder/GE/C&S.

Supply and fix in repairs MCB Distribution board , 240 volts single pole and neutral ,double door, sheet steel, enclosure powder coated with 200 Amps rated busbar with neutral link, 8 ways , fixed on wall duly grouted in solid block wall or on wooden board with electrical connection complete all as specified and directed. Make: Havells Cat part No DHDPSHODRW08 or equivalent in Legrand/Schnieder/GE/C&S.

Supply and fix as in repairs MCCB four pole , 415 Volt, 63 Amps,16 KA , fixed thermal & magnetic setting complete all as specified and directed. Make:- Make: Havells Cat Part No: IHLGNF0063 / L&T cat part no. CM9793300H2 or equivalent model from Make:- Siemens / Schneider / Legrand / L&T.

Supply and fix in repair MCB, SPN, 240 Volt, 32 Amps, 10 kA rupturing capacity 'C' series, AC complete all as specified and directed by Engr-in Charge. Make: Havells Cat Part No:DHMGCSNF006-32 or equivalent in Legrand/Schnieder/L&T/C&S.

Supply and fix in repair MCB, SPN, 240 Volt, 40 Amps, 10 kA rupturing capacity 'C' series, AC complete all as specified and directed by Engr-in Charge. Make: Havells Cat Part No:DHMGCSNF040 or equivalent in Legrand/Schnieder/L&T/C&S.

Supply and fix in repair MCB, TPN, 240 Volt, 63 Amps, 10 kA rupturing capacity 'C' series, AC complete all as specified and directed by Engr-in Charge. Make: Havells Cat Part No:DHMGCTNF063 or equivalent in Legrand/Schnieder/L&T/C&S.

Supply and fix in repair MCB SP, 240 Volt, 6-32 Amps, 10 kA rupturing capacity 'C' series complete all as specified and directed. Make: Havells Cat part No- DHMGCSPF006-032 or equivalent in Legrand/Schnieder/GE/C&S.

Material and labour for sub main wiring with two single core 6.0 sqmm FRLSH, ISI marked PVC insulated multi stranded, unsheathed copper conductor cable and one single core unsheathed FRLSH , ISI marked, PVC insulated multistranded copper conductor cable of size 6.0 sqmm green colour as earth lead including PVC casing capping of suitable size complete all as specified and directed, including taking down unservicable one.(Note: two run of 6.0 sqmm cable , one run of earth wire of 6.0 sqmm and one run of PVC casing capping shall be measured as one length). Make- Cable- Finolex/RR Kabel/Havells, PVC Casing Capping- Presto plast/Finolex/Kalinga.

Supply and fix in repairs LED lamp 7 Watt B22 base Color Temp 6500 K complete including taking down old unserviceable one all as directed. Make Havell's/Phillips/Bajaj

Material and labour for earthing complete with galvanised steel earth plate electrode 60 Cm X 60 Cm X 6 mm buried directly in ground vertically to a depth notless than 2.25 mtr deep below ground level with top edge of earth plate at a depth not less than 1.5 m below normal ground level connected to galvanised earth lead wire 4.0 mm dia by means of bolts, check nuts and washers ,galvanised steel and protected by GI pipe 15 mm bore light grade & connected to main switch board or main control board as directed and including concrete pit in PCC (1:3:6) type C1, precast RCC (1:2:4) type B1 cover slab 30 cm X 30 cmX 5 cm with 10mm dia TMT bars 8 cm C/c both ways and one handle for lifting made out of 8 mm dia TMT bar, funnel, wire mesh, 20mm bore galvanised iron pipe (medium grade) for watering, charcoal or coke and salt in alternative layers, necessary excavation and earth work in any type of soil and including necessary testing complete including taking down old unserviceable one, all as shown in Electrical Plate No 3 of SSR part -I.

S & F in repairs Wall bracket decorative LED Light fitting with lamp 9 Watt complete with necessary connection complete all as specified and and directed. Make:Havellls Cat No LHOAJE2TZ1I060 or equivalent in Philips/Bajaj

Supply and fixing in repairs Building light LED 25 Watt including connection with three core cable 1.5 sqmm complete all as specified and and directed by Engr-in-charge. Make:- Bajaj Cat part No- BRLEP 25W LED WH or Havells Cat No-ENDURACITYLITE25W or equivalent in Phillips

S & F in repairs exhaust fan 230 volts , 250mm,plastic body Ventilator DX including making all electric connection complete all as specified and as directed and making good disturbed surface of wall and outer wooden box for fixing fan on wall. Make Orient/Bajaj/Havell's/CG Note:- Old unserviceable exhaust fan obtained after taking down shall be deposited to MES store.

M/S UTTAM SAHA

M/s SS Engineering

M/S U.K ENTERPRISE