Creation of tourism facilities and other tourism development works in Kapilvastu of Siddharthnagar district.

Earth Works Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including ge

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc.

Excavating, supplying, stacking and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in foundation trenches, plinth, sides of foundation etc. complete for all lift.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete.

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Foundations, footings, bases of columns, etc. for mass Centering and shuttering including strutting, propping etc. and removal of form for all heights : concrete

Same as Item No 7 but for Columns, Pillars, Piers, Abutments, Posts and Struts

Same as Item No 7 but for Stairs, (excluding landings) except spiral-staircases

Same as Item No 7 but for Suspended floors, roofs, landings, balconies and access platform with water proof ply 12 mm thick

Same as Item No 7 but for Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Foundation RCC Work in Plinth Column RCC Work in Plinth Beam

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). Column

RCC Work in Beam (M20 Grade)

RCC Work in Slab (M20 Grade)

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick Work and Plaster Work Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level. Cement mortar 1:4 (1 cement :4 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix: 1:6 (1 cement: 6 coarse sand)

Cement plaster 1:3 (1 cement: 3 coarse sand) finished with a floating coat of neat cement. 12 mm cement plaster

Add for plaster drip course/ groove in plastered surface or moulding to R.C.C. projections.

Steel Work Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Mild steel or iron work of small sizes and sections such as holding down bolts, hold fasts, tie rods, gratings etc. (when not included in an over all rates) wrought to required form, including supply of steel, bolts, nuts and wastage etc. and their fixing required for proper completion of the work.

Mild Steel or iron work in heavy sizes such as trusses, builts up gates, door frames, records racks, roof works, gates etc. wrought to required form, including drilling holes, rivetting or welding where necessary, and also including supply of steel, bolts, nuts, and wastages etc., and their fixing required for completion of the work.

Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) nondecorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters: 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws. Single Leaf

Extra for Providing and fixing flush doors with decorative veneering instead of non decorative ISI marked flush door shutters conforming to IS: 2202 (Part I). Both Side

Providing and fixing factory made uPVC glazed/wire mesh windows/doors comprising of lead free uPVC multi-chambered frame, sash and mullion/coupler (where ever required) extruded profiles having minimum wall thickness of 1.70 mm for Series R1 and R2 profiles and 2.10mm for Series R3 and R4 profiles conforming to EN: 12608 in any shape, colour and design duly reinforced with galvanized mild steel section made of required shape & size as per CPWD Specification, uPVC extruded glazing beads, interlocks and Inline sash adaptor (where ever required) of appropriate dimension, EPDM gasket, hardware, SS 304 grade fasteners of minimum 8 mm dia with countersunk head, comprising of matching polyamide PA6 grade sleeve for fixing frame to finished wall as per IS 1367 : Part 1 to 14, plastic packers, plastic caps and necessary stainless steel screws etc. Profile of frame, sash & mullion (if required) shall be mitred cut and fusion welded/mechanically jointed duly sealed at all corners, including drilling of holes for fixing hardware and drainage of water etc. After fixing frame the gap between frame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of approved size and quality, all complete as per approved drawing conforming to CPWD specification & direction of Engineer-in-Charge. Section of steel reinforcement and cross sections of uPVC profiles to be as per design approved by Engineer-in-Charge. Wire mesh / Glazing of plain/ toughened/ laminated/ double glass unit with / without high performance coatings as per design requirements and conforming to IS: 3548 & IS: 16231 shall be paid separately. Note:- Structural design proof checked from a Government Engineering Institute, to be provided by the manufacturer for : (i) Sites with basic wind speed > 45 m/sec as per IS 875 – Part 3 (ii) Sites with structure height more than 20m for all wind speeds Three track three panels sliding window with two glazed & one wire mesh panels with Aluminium channel for roller track, wool pile, nylon rollers with SS 304 body. Using R2 series with frame (70mm & above) x (40mm & above) & both glazed and fly screen sash (25mm & above) x (50mm & above) with zinc alloy (zamak) powder coated touch locks with hook. (Height upto 1.2 metre).

Providing and fixing 150 mm bright finished floor brass door stopper with rubber cushion, necessary brass screws etc. to suit shutter thickness complete

Providing & fixing stainless steel sliding door bolts ISI marked anodised (anodic coating not less than grade AC 10 as per IS 1868) transparent or dyed to required colour or shade with nuts and screws rtc. Complete (a) 250mm x 16mm Crown Round Sliding Bolts(Ferrous Metals)-

Providing & fixing stainless steel tower bolts (barrel type) with necessary screws etc complete crown Half Round Tower Bolts(Ferrous Metals)-Is:204

crown Round Tower Bolts(Ferrous Metals)-Is:204 (CROWN CAL-99 BRASS TOWER BOLT 200 MM)

Unbranded Access Controlled Handle Door Lock Only RFID card based Access Control

Providing & fixing glass panes with putty and glazing clips in steel doors, windows, clerestory windows, all complete with : 4.0 mm thick glass panes

Flooring Work Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm

Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm

Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing of edges to give high gloss finish etc. complete at all levels. Granite stone slab of colour black, Cherry/Ruby red Area of slab over 0.50 sqmFlooring

Skirting

Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete.

Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zoneIII) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth.

Roof Work and Terrace Water Proofing Providing and laying integral cement based water proofing treatment including preparation of surface as required for treatment of roofs, balconies, terraces etc consisting of following operations: (a) Applying a slurry coat of neat cement using 2.75 kg/sqm of cement admixed with water proofing compound conforming to IS. 2645 and approved by Engineer-in-charge over the RCC slab including adjoining walls upto 300 mm height including cleaning the surface before treatment. (b) Laying brick bats with mortar using broken bricks/brick bats 25 mm to 115 mm size with 50% of cement mortar 1:5 (1 cement : 5 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge over 20 mm thick layer of cement mortar of mix 1:5 (1 cement :5 coarse sand ) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge to required slope and treating similarly the adjoining walls upto 300 mm height including rounding of junctions of walls and slabs. (c) After two days of proper curing applying a second coat of cement slurry using 2.75 kg/ sqm of cement admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge. (d) Finishing the surface with 20 mm thick jointless cement mortar of mix 1:4 (1 cement :4 coarse sand) admixed with water proofing compound conforming to IS : 2645 and approved by Engineer-in-charge including laying glass fibre cloth of approved quality in top layer of plaster and finally finishing the surface with trowel with neat cement slurry and making pattern of 300x300 mm square 3 mm deep. (e) The whole terrace so finished shall be flooded with water for a minimum period of two weeks for curing and for final test.“All above operations to be done in order and as directed and specified by the Engineer-in-Charge : With average thickness of 120 mm and minimum thickness at khurra as 65 mm

Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main “T” runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200 mm center to center and cross “T” of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main “T” at 600 mm center to center to form a grid of 1200x600 mm and secondary cross “T” of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/ making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main “T” runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of all T-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed by Engineer-in-charge.GI Metal Ceiling Lay in perforated Tegular edge global white colour tiles of size 595x595 mm and 0.5 mm thick with 8 mm drop; made of GI sheet having galvanizing of 100 gms/ sqm (both sides inclusive) and 20% perforation area with 1.8 mm dia holes and having NRC (Noise Reduction Coefficient ) of 0.5, electro statically polyester powder coated of thickness 60 microns (minimum), including factory painted after bending and perforation, and backed with a black Glass fiber acoustical fleece.

Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two Coats

Stone Work (Machine cut edges) for wall lining (Veneer Work) upto 10m height, backing filled with grout of average 12mm thick lime mortar 1:2 (1 lime : 2 coarse sand ) including pointing in lime mortar 1:2 (1 lime : 2 stone dust) with an admixture of pigment matching the stone shade : (To be secured to the backing and the sides by means of clamps and pins which shall be paid separately ): Red sand stone - Exposed face machine cut and table rubbed with rough backing. 40mm thick Stone

Providing and fixing stainless steel cramps of required size and shape for anchoring stone wall lining to the backing or securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases in stone and holes in walls wherever required.

Providing and fixing copper pins 7.5 cm long 6 mm diameter for securing adjacent stones in stone wall lining in cement mortar 1:2 (1 cement : 2 coarse sand), including making the necessary chases.

Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. Red Sand Stone

Providing and fixing stone jali 40 mm thick throughout in cement mortar 1:3 (1 cement : 3 coarse sand), including pointing in white cement mortar 1:2 (1 white cement : 2 stone dust) with an admixture of pigment, matching the stone shade, jali slab without any chamfers etc. White Sand Stone

Supply, fabricating, transporting, hoisting and fixing in a position good quality durable Chunar/Mirzapur sandstone/any other type of sandstone in various elements for all level all height. Stone shall be free from cracks, lines, stains, white spots of efflorescence and even in the shade of each element. The stone shall be fine grained and reddish or buff-coloured (locally available of no.1 quality. The work shall be carried out as per attached drawings which different in process of i.E carving(manual/by machine), ornamental work, traditional work, figure work, (any other type, any size), CNC cutting, moulding. The carving and moulding work shall be of very good quality and the drawings provided are very preliminary and amount of carving might change during the final execution. The stones to be fized in line, level and plumb in all respect with the use of brass clamps, pins, dowels, cement slurry with matching pigment and epoxy of Akemi Germany, Anrdex Endura, MYK laticrete or approved make as required and as approved by the Architects. To and fro Transportation charges to CNC establishment included in the above rates.

Interior Furniture & Fixtures supplying and fixing ceasefire Portable Fire Extinguishers as per IS 15683 (2018) High Pressure Extinguisher (Service Pressure >19 bar) Carbon Dioxide Based (as per IS 15222) Class -B, complte with stand/ holder/ etc

Drinking Water Cooler 40 litres / hour 60 litres such as BIRLA - AIRCON/Aircon or equivalent

Reverse Osmosis (RO) >250<=500 LPH Filtration Capacity make of Aqua prag or equivalent

Automatic Coffee Dispensing Machine (GMFEH01) Godrej/durain/equivalent

Reception area furniture and office furniture including sofa and centre table Reception area furniture DURIAN 6 Seater Sofa With Leatherite Cover (JESSE SOFA SET 3+2+1) Frame Covering: Fully Upholstered Density of Cushion of Backrest Material (Kg/Cubic M): 40 Covering Material for Seat and Backrest: Leatherite Length of Single Seater Units in mm (±5 mm): 660 Length of Two Seater Units in mm (±10 mm): 1220 Length of Three Seater Units in mm (±10 mm): 1750 Depth of Sofa Units in mm (±10 mm): 700 Sofa Height (Without Back Cushion) ±5 (mm): 800 millimeter Sofa Height (With Back Cushion) ±5 mm: 845 millimeter Warranty: 5 - Years

Centre table: Length: 48 inch Width: 24 inch Height: 18 inch Table Features: Glass Work Material: Wood Durian Godrej or Equivalent

Office furniture Office table: Castlery Executive Table Marine ply wood table with 3 drawers on one side, finished with wooden laminate Table top size 1050X600 Warranty 26 months Durian Godrej or Equivalent

Office chair: Revolving Chair with Tilt working with torsion bar mechanism Type of chair: Mid Back Tilt mechanism: Tilt working with torsion bar mechanism Locking mechanism: Upright locking Seat depth adjustment: Fixed type Revolving mechanism: Designed with 360 degree-revolving type Pedestal base: Mild steel with wooden cladded Minimum thickness (in mm) of MS Plate Joining the backrest with seat of the chair: 3.2 millimeter Seat material: PU foam Density of PU used in seat (kg per cubic meter) >30<=40 Thickness of PU used in seat (mm) >50 Minimum seat height from floor surface (mm) <=400 Width of seat (mm) >450<=500 Depth of seat (mm) >450<=500 Seat upholstery material: Leather Backrest type: Fixed type Backrest height: Fixed Backrest support type: Contoured back / Without lumber support Backrest base frame material: Hot pressed plywood Density of PU used in backrest (kg per cubic meter): >30<=40 Thickness of PU used in backrest (mm): >50 Width of backrest (mm): >450<=500 Backrest height from the seat level: >450<=550 Armrest type and arm movement: Fixed Warranty period in number of years: 1 year make of Durain Geeken or Equivalent

Reception table: Empire Safe Co. Modular Table with Particle Board Table Top and Wooden/Engineer Wood Understructure Length of Table Top (Tolerance ±50 mm): 1200 mm Depth of Table Top (Tolerance ±20 mm): 1200 mm Availability of Pedestal / Storage Unit: Yes Warranty period (in number of months): 12 month make of Durian Equivalent

Cafeteria furniture Cafeteria chair: Unbranded--ALLOY WORLD Square Cafeteria Chair With Armrest Shape of the Cafeteria Chair Seat: Square Chair Armrest: With Armrest Material of Chair Seat: Moulded Ply Seat with Cushion: Yes Thickness of Cushion for Seat: 35 millimeter Density of Seat Cushion Kg/m^3: 30 Upholstery Material of Seat: Fabric Material of Chair Back: Moulded Ply Back with Cushion: Yes Thickness of Cushion for Back: 32 millimeter Density of Back Cushion Kg/m^3: 40 Upholstery Material of Back: Fabric Material of the Chair Under structure: Marine Ply Height of Chair Seat from ground with a tolerance of ± 10 mm: 450 millimeter Overall Height of Chair from ground with a tolerance of ± 10 mm: 955 millimeter Warranty Period: 1 year make of durain/Godrej or equivalent make of Durian Equivalent

Cafeteria table: Wood Contemporary Dining Tables Length: 1755 millimeter Width: 810 millimeter Height: 745 millimeter make of Durian Godrej Geeken or Equivalent

Picnic table: Picnic Table Legs/Stand of G.I Pipe frame and table top and seat of FRP sheets GI pipe diameter (nominal bore) Legs/Stand: 25 mm (B class conforming to IS 1239 latest) PU coated with the layer of thickness of 60 microns Shape of picnic table: Round Usage/application: INDOOR Weight bearing capacity in KG: 452 Main structures: Legs/Stand of G.I Pipe frame and table top and seat of FRP sheets FRP sheets finishing: G.P resin of 3 mm to 4 mm thickness applied above the surface of gel coat which is dully mixed with U.V stabilized pigment to provide resistance to ultra violet light degradation Cast iron / GI pipe supports finish: PU paint over two coat of epoxy primer With diameter of 2450 mm (for round picnic table) Warranty periods: 3 years make of Durian Godrej Geeken or Equivalent

Kitchen furniture, utencils and equipment Refrigerator: Bosch Total Volume for Direct Cool NA Total Volume for Frost-free 551-600 2 star Warranty on Product (Year): 1 Warranty on Compressor (Year): 10 make of Bosch Voltas or equivalent

250-300 Liters Deep Freezer Conformity to Standards: CE (with 4 digit notified number) Capacity in liters: 250-300 Type of cabinet: Chest Castors: Heavy duty lockable godrej/durain/ equivalent Samsung Voltas or Equivalent

Automatic Bench Type Industrial Oven, Warranty 1 year Heating Load: 8 kiloWatt Type: Bench Type Capacity: 100-500 Kg Tray/Trolley: 4 Warranty: 1 year Automation Grade: Automatic Other features: Control Panel ,Temperature Controller ,Timer ,LED indicator Safety: Over Temperature Protection ,Cut-Out at over Temperature Philips Bosch Samsung Voltas or Equivalent

Gas stove: Toughened Glass LPG Gas Stove Specification: Confirming to IS - 4246 (latest) Number of Burners: 4 Ignition Type: Manual Material of Body: Toughened Glass No of Legs of stove: 4 Warranty on Stove material: 2 Warranty on Burners & Gas valves: 2 Surya Green Khaitan Prestise or Equivalent

Steel rack: Stainless Steel Grade 202 galvanized Shelf Rack With 5-Shelf (including top shelf) Configuration: With 5-Shelf (including top shelf) Shape of support structure: Angle post Ground clearance (mm): 25 mm Shelf material: Stainless Steel Grade 202 galvanized Shelf material thickness: 0.6 mm Support structure material: Stainless Steel Grade 202 galvanized Support structure material thickness: 0.6 mm Width of shelf rack ± 10 mm: 915 mm Depth of shelf rack ± 10 mm: 405 mm Height of shelf rack ± 10 mm: 1675 mm Height of support structure ± 10 mm: 1720 mm Size of support structure: 30 mm x 30 mm Warranty period: 1 - Year Cookmen Durian Or Equivalent

Double bed: King Size Wooden Bed with Headboard only Size Category of Wooden Bed: King Size Overall length of Bed (in mm): 1950 - 2000 mm Overall width of Bed (in mm): 1800 - 1950 mm (6 to 6.4 ft) Overall Height of Bed Frame from installation level (in mm): 350 - 400 mm Warranty (in Months): 48 Durian Godrej Or Equivalent

Side tables: Bedside Tables, Number of Drawers Length: 50 centimeter Width: 43 centimeter Height: 50 centimeter Number of Drawers: 2 Material: Wood

Sofa chair:Angular 1 Seater Sofa With Leatherite Cover ackrest Cushion Material: Foam Density of Cushion of Backrest Material (Kg/Cubic M): 28 Covering Material for Seat and Backrest: Leatherite Frame Structure Material and size (±1 mm): 18 mm thick Teak Plywood Seat Cushion Material: Foam Density of Cushion of Seat Material ±3 (Kg/Cubic M): 30 Type of Spring in the Base / Seating: Web suspension Length of Single Seater Units in mm (±5 mm): 700 Depth of Sofa Units in mm (±10 mm): 800 Sofa Height (Without Back Cushion) ±5 (mm): 470 millimeter Sofa Height (With Back Cushion) ±5 mm: 790 millimeter Seat Cushion Length ±5 (mm): 640 Seat Cushion Width ±5 (mm): 560 Seat Cushion Thickness ±3 (mm): 100 Backrest Cushion Length ±5 (mm): 920 Backrest Cushion Width ±5 (mm): 415 Warranty: 1 - Year Durian Geeken or Equivalent

Sofa table: Modular Table with Glass Table Top and Metal Understructure Material Type of Table Understructure: Metal Understructure Support Type of Table Understructure: Gable Material of Table Understructure: Mild Steel Table Understructure Metal Legs Cross Section (Approx): 40 x 40 mm Thickness of Metal Legs Cross Section: 1.0 mm Length of Table Top (Tolerance ±50 mm): 1050 mm Depth of Table Top (Tolerance ±20 mm): 600 mm Warranty period (in number of months): 36 month Durian Geeken Or Equivalent

Office table: Castlery Executive Table Marine ply wood table with 3 drawers on one side, finished with wooden laminate Table top size 1050X600 Warranty 26 months Durain/Geeken/Eq

Office chair: geeken Revolving Chair with Tilt working with torsion bar mechanism Type of chair: Mid Back Tilt mechanism: Tilt working with torsion bar mechanism Locking mechanism: Upright locking Seat depth adjustment: Fixed type Revolving mechanism: Designed with 360 degree-revolving type Pedestal base: Mild steel with wooden cladded Minimum thickness (in mm) of MS Plate Joining the backrest with seat of the chair: 3.2 millimeter Seat material: PU foam Density of PU used in seat (kg per cubic meter) >30<=40 Thickness of PU used in seat (mm) >50 Minimum seat height from floor surface (mm) <=400 Width of seat (mm) >450<=500 Depth of seat (mm) >450<=500 Seat upholstery material: Leather Backrest type: Fixed type Backrest height: Fixed Backrest support type: Contoured back / Without lumber support Backrest base frame material: Hot pressed plywood Density of PU used in backrest (kg per cubic meter): >30<=40 Thickness of PU used in backrest (mm): >50 Width of backrest (mm): >450<=500 Backrest height from the seat level: >450<=550 Armrest type and arm movement: Fixed Warranty period in number of years: 1 year Geeken, Durian or Eq

TV unit: woodenstreet TV & Entertainment Unit Material: Wood Samsung or Eq

Type/Category/Class of Teleivision set Smart TV(2) Actual Screen Size (inches) 43 LED (Light Emitting Diode) SAMSUNG (Samsung HG43BU800) Type/Category/Class of TV set: Smart TV(2) Display Type/Technology: LED (Light Emitting Diode) Nominal Screen Size Range (Inches): 46 inch Audio Power (minimum): 10W x 2 Maximum Resolution (Pixels) supported: 4K Ultra HD (UHD): 3840x2160 Typical Brightness (Nits): 300 - 399 BEE Star Rating: 1 star Comprehensive Standard Warranty(Years): 1 Warranty on Display only (Years): 3 TV: make SAMSUNG or equivalent

Cupboard: Ajoria Interiors Bedroom Wardrobes, Number of doors 2 Length: 600 millimeter Width: 840 millimeter Height: 750 millimeter Number of doors: 2 Material: Plywood Godrej Geeken Durian or Eq

Small Cupboard: Ajoria Interiors Bedroom Wardrobes, Number of doors 1 Length 600 millimeter Width: 450 millimeter Height: 1530 millimeter Number of doors: 1 Material: Plywood Godrej or Eq

Single bed: Queen Size Wooden Bed with Headboard only Overall length of Bed (in mm): 1950 - 2000 mm Overall width of Bed (in mm): 1500 - 1650 mm (5 to 5.4 ft) Overall Height of Bed Frame from installation level (in mm): 300 - 350 mm DURIAN Geeken or equivalent

Single folding cot SS bed: Steel folding cot with MDF board top Top size 2100 x 900 mm Confirming the requirement of Drawing number: GeM/GE/FC/246(SUB TITLE – STEEL FRAME) and Drawing number GeM/GE/FC/246 (SUB TITLE MDF – BOARD TOP) or Drawing number GeM/GE/FC/246 (SUB TITLE PLYWOOD TOP) – uploaded at specification document Mainframe material 25 mm NOM bore ERW Steel tube black (medium) ISI mark to IS:1161-2014 grade - YSt-210 Support frame material 15 mm NOM bore ERW Steel tube black (medium) ISI mark to IS:1161-2014 grade - YSt-210 Top material 19 mm thick (11 Ply) ISI marked Synthetic Resin Bonded Grade-BWR, Type-AA confirming to BIS specification IS:303 /1989 (Reaffirmed 2013) with Amendment no. 1 to 6 Durian Geeken or Eqlt

Mattress for beds/ cots: Three Layers Foam Mattress of size 1981 mm x 914 mm Number of Layers: Three Layers Thickness of Top Layer (Tolerance :- ± 2 mm): 25 mm Thickness of Core Layer 1 (Tolerance :- ± 2 mm): 75 mm Thickness of Core Layer 2 (Tolerance :- ± 2 mm): Not Applicable Thickness of Bottom Layer (Tolerance :- ± 2 mm): 25 mm Material of Top Layer: PU Foam Quilting: Both Side Quilting (Double Sided) Thickness of Quilting (± 2 mm): 16 mm Mattress Cover Fabric Composition: 80% Polyester and 20% Cotton Blended Dimensions (Tolerance ±15 mm): 1981 mm x 914 mm Warranty (In Years): 1 Godrej or Eqlt

Pillow: Cotton Pillow 33 cm x 56 cm Stitching Cotton Sewing thread as per IS : 1720, 165 d tex x 6 ( 36s/6 ) white Body cover ( casing ) Cloth Cotton Drill as per BIS specification no. IS :177 - 1989, Varity no. 3 ( Mercerized and Preshrunk ) Sleepwell or Eqlt

Bed sheet and pillow cover: Unbranded Cotton Single (1 bedsheet and 1 pillow cover) Bed Sheets-Handicra Material: Cotton Pattern: Bordered Work ength 1.82 meter Width 0.91 meter Thread Count: 100 - 149

Bed sheet for Double Bed

gas stove: Toughened Glass LPG Gas Stove Specification: Confirming to IS - 4246 (latest) Number of Burners: 4 Ignition Type: Manual Material of Body: Toughened Glass No of Legs of stove: 4 Warranty on Stove material: 2 Warranty on Burners & Gas valves: 2 Durian Geeken Sleepwell or Eqlt

bombay dyeing Single Bedding Cotton- 100 % Quilt Cover Size: Single Bedding Fabric Composition: Cotton- 100 % Fabric Colour/ Print: White / Bleached Closure: Zip type Sleepwell Or Eqlt

Locker for bathroom: Steel Clothes 6-locker type Governing Standard: Conformity to IS : 3314 - 2020 Types of Clothes Lockers: 6-locker type Godrej or Eqlt

Towel rack: PRAYAG Stainless Steel 302 Single Towel Rail/bar Type of Fitting: Single Towel Rail/bar Material of product: Stainless Steel 302 Finish of product: Nickle chrome Thickness of rod (cm): 10-12 Length of towel rail/bar/ robehook: 22.1-25 Jaguar or Eqlt

Bag/ robe hook: PRIMA Stainless Steel 302 Robehook Material of product: Stainless Steel 302 Finish of product: Nickle chrome Length of towel rail/bar/ robehook: 12.1-14 width of towel rail/bar: 7.1-9 Geeken Godreg or Eqlt

Common room - Dining table HP S Stainless Steel Rectangular Dining Table with C3431E Round fixed Chair Durian Geeken Eqlt

Domestic Textile Washing Machine Washer of 7 Kgs Automation/Usage Type: Fully Automatic Type of Machine: Washer Type of Loading: Top load BEE Star Rating: 5 Comprehensive Warranty (in years): 2 Motor Warranty (in years): 10 Bosch Samsung or Eqlt

Washing machine Washer of 10 KG of IFB Washer with Dryer / Extractor Front Load Three phase, 50 Hz Washing Machines / Drying Machines (IFB IWE 15 WITH TOUCH SCREEN DISPLAY & 1 YEAR WTY) Whirphool Bosch Samsung or Eqlt

Room furniture- Ironing table- 4 – Cross Legged frames (for foldable design), 2 – step height adjustment, Multi layered comprising of Felt + Anti drip material + Foam + Cotton) Durian Geeken or Eqlt

Electrical Works of Consolidated Public Amenities in Temple Complex Wiring for light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group C

Wiring for circuit/sub-main wiring along with earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2X1.5 sqmm + 1x1.5 sqmm earth wire

Wiring for circuit/sub-main wiring along with earth wire with the following size of FRLS PVC insulated copper conductor, 2X2.5 sqmm + 1x2.5 sqmm earth wire

Wiring for circuit/sub-main wiring along with earth wire with the following size of FRLS PVC insulated copper conductor, 2X4.0 sqmm + 1x4.0 sqmm earth wire

Wiring for circuit/sub-main wiring along with earth wire with the following size of FRLS PVC insulated copper conductor, 2X6.0 sqmm + 1x6.0 sqmm earth wire

Supply and fixing of stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required.

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connection etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connection etc. as required.

Instalation, testing & commissioning of wall bracket/ceiling fittings of all sizes and shapes containing upto two GLSCFL/LED lampsper fitting, complete with all accessories including connection etc. as required.

Installation, testing and commissioning of prewired, flourescent fitting/compact fluorescent fitting of all types, complete with all accessories and tubes etc. directly on ceiling/wall, including connection with 1.5 sq.mm. PVC insulated, copper conductor, single core cable etc. as required.

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto30cm) with 1.5 sq.mm FRLS PVC insulated, copper conductor,single core cable etc. Including providing and fixing phenolic laminated sheet cover on the fan box etc. as required.

Numbering of ceiling fan/exhaust fan/fluorescent fittings as required.

Providing and fixing circular/Hexagonal cast ironor M.S. sheet box for ceiling fan clamp, of internal dia140mm,73mm height, top lid of1.5 mm thick M.S. sheet with its top surface hacked for proper bonding, top lid shall be screwed into the cast iron/M.S. sheet box by means of 3.3mm dia round headed screwed,one loc at the conrners. Clamp shall be made of 12mm dia M.S. bar bent to shape as per standard drawing.

Supply, Installation, Testing and Commissioning of 1200mm sweep, BEE 5 star rated, ceiling fan with Brush Less Disect Current (BLDC) motor, class of insulation: B, 3 nos. blades, 30 cm long down rod, 2 nos. canopies, shackle kit, safety rope, copper winding, Power Factor not less than 0.9, Service Value (CM/M/W) minimum 6, Air delivery minimum 210 Cum/Min, 350 RPM (tolerance as per IS:374-2019), THD less than 10% remote or electronic regulator unit for speed control and all remaining accessories including safety pin, nut bolts, washers, temperature rise=75 degree C (max.), insulation resistance more than 2 mega ohm, suitable for 230V, 50Hz, single phase AC Supply, earthing etc. complete as required.

Supplying and fixing following way, Horizontal type three pole and neutral MCB distribution board, 415 volts on surface /recess complete with, tinned copper busbar,neutral busbar, earth bar,din bar, inter connections, powder painted including earthing etc. as required (But without MCB/RCCB/Isolators). 4 Way (4+12), Double Door

Supplying and fixing 5 amps. To 32 amps. rating, 240 volts `C' series, miniature circuit breaker (MCB) suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

Supplying and fixing single pole, blanking plate in the existing MCB DB complete etc. as required.

Supply and fixing following rateing four pole, 415V, isolator in the existing existing MCB DB complete with connections, testing and commissioning etc. as required. 40 A

Suplying and fixing cable end box (Loose Wire Box) suitable for following triple pole and neutral, sheet steel, MCB distribution borad, 415 Volts, on surface/recess, complete with testing and commissoning etc. As required. For 4 way, Double Door TPNMCBDB

Earthing with GI earth pipe, 600 mm X 600 mm X 6 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc, with charcoal/cock and salt as required.

Supplying and Laying of 25 mm X 3 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35 sqmm

Supplying & making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 2 X 10sqmm (19mm)

Supplying & making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. 4 X 10sqmm (25mm)

Providing, laying and fixing following dia G.I. pipe (medium class) in ground complete with G.I. fittings including trenching (75 cm deep) and refilling etc as required. 100mm Dia

Supply of following size of 1.1 KV grade multi core aluminium conductor PVC sheathed armoured cable as per IS 1554. FURCON 2 Core 10.0 sq. mm PVC Copper Circular Sheathed Cable with Rigid Conductor 10 sqmm 2 core

PYFLEX 2 Core 6.0 sq. mm PVC Copper Circular Sheathed Cable with Rigid Conductor 10 sqmm 4 core

KEI 4 Core 10.0 sq.mm PVC Copper Circular Sheathed Cable with Rigid Conductor 10 sqmm 4 core

Supply of LED Tube Light with batten suitable for upto 1X20 watt LED tube light complete including tube etc. on surface/Pendent complete in all respect. Make-Philips or Equivalent

Supplyof recess/Surface/Pendent mounting round 10 to 15 watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/Reflector and driver set complete in all respects. Make-Philips or Eq

WIPRO LED Luminaire (Recessed Luminaire) Rating - 36 Watt Supply of service bracket of 50mm. Dia 4 meter long fabricated from class ''B'' G.I. pipe complete with two bend, socket, wall clamps. 7/3.15mm G.I. stay wire, stay insulators etc. complete in all respects. Product id:

Supply of LED street light fitting having die cast aluminium body and diffuser/reflector with driver set suitable for 75 watt to 90 Watt confirming to IP 66 protection complete in all respect. Make-Philips or Eq

WIPRO LED Luminaire For Road And Street Lighting Rating - 120 Watt Plumbing Works of Consolidated Public Amenities Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 110mm diameter

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over P.V.C. sheet 1 m x1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement, rounding the edges and making and finishing the outlet complete

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50 mm hard wood plugs, screwed with M.S. screws of required length, including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. White Vitreous china Orissa pattern W.C. pan of size 580x440 mm with integral type foot rests

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required W.C. pan with ISI marked white plastic seat and lid

Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: White Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap.

Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. Semi rigid pipe a) 32mm dia

Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. Semi rigid pipe b) 40mm dia

Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete.

Providing and fixing white vitreous china flat back half stall urinal of size 580x380x350 mm with white PVC automatic flushing cistern, with fittings, standard size C.P. brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS :2556, C.I. trap with outlet grating and other couplings in C.P. brass including painting of fittings and brackets, cutting and making good the walls and floors wherever required a) Single half stall urinal with 5 litre P.V.C. automatic flushing cistern Parywear Cerra Hindustan or Eqlt

b) Range of two half stall urinals with 5 litre P.V.C. automatic flushing cistern

c) Range of three half stall urinals with 10 litre P.V.C. automatic flushing cistern

Providing and fixing stone slab table rubbed, edges rounded and polished of size 75x50cm deep and 1.8cm thick fixed in Urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1cement: 2coarse sand: 4graded stone aggregate 6mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade

Providing and fixing 8 mm dia C.P./S.S. Jet with flexible tube upto 1 meter long with S.S. triangular plate for Eureopean type W.C. of quality and make as approved by engineer-in-charge. 15mm nominal bore

Providing and fixing Toilet paper holder a) C.P. brass

Providing and fixing PTMT Liquid soap container 109 mm wide ,125 mm high and 112 mm distance from wall of standerd shape with bracket of the same material with snap fittings of approved quality and colour weighing not less than 105 gms.

Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS : 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. 110mm diameter

Making khurras 45x45 cm with average minimum thickness of 5 cm cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate of 20 mm nominal size) over PVC sheet 1m x 1 m x 400 micron, finished with 12 mm cement plaster 1:3 (1 cement : 3 coarse sand) and a coat of neat cement,punning,rounding the edges and making and finishing the outlet complete.

Providing and fixing unplasticised -PVC pipe clips of approved design to unplasticised - PVC rain water pipes by means of 50x50x50mm hard wood plugs, screwed with M.S. screws of required length including cutting brick work and fixing in cement mortar 1:4 (1 cement : 4 coarse sand) and making good the wall etc. complete. 110mm

Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams.

Providing and laying cement concrete 1:5:10(1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size) around P.V.C /C.I. Soil and waste pipe including bed concrete as per standard design(embedded in the flooring / ground) 110/75 mm diameter

Providing & fixing G.I. pipes complete with G.I. fittings & clamps including cutting & making good the walls etc. (internal work) Exposed on wall 32mm dia nominal bore

Painting G.I. pipes and fittings with two coats of anti corrosive bitumastic paint of approved quality. 32mm dia nominal bore.

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. internal work -Exposed on wall 25mm dia nominal outer dia pipes

Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1.00m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testiang of joints complete as per direction of Engineer in Charge. Concealed work including cutting chases and making good the walls etc. 15mm dia nominal outer dia pipes Prince/Everest or Eqlt

Same as Item no 153 but for 20mm dia nominal outer dia pipes

Same as Item no 153 but for 25mm dia nominal outer dia pipes

Providing and fixing 45 cm long unplasticised PVC connection pipe with brass unions. 15mm nominal bore Prince Everest Or Eqlt

Providing & fixing CP brass bib cock of approved quality conforming to IS 8931 15mm nominal bore Jaguar Paryware or Eqlt

Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 15mm nominal bore Jaguar Paryware or Eqlt

Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931 15mm nominal bore Jaguar Paryware or Eqlt

Providing & fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. Jaguar Paryware or Eqlt

Providing and fixing gun metal gate valve with wheel of approved quality. 25mm dia nominal bore

32mm dia nominal bore

Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete25 mm nominal bore

Providing and placing on terrace (at all floor levels) polyethylene water storage tank. IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and he base support for tank.

Excavating trenches in all kind of soil of required width for pipes, cables etc. including excavation for sockets and dressing of sides, ramming of bottoms, depth upto 1.5 m. including getting out the excavated soil & then returning the soil as required, in layers not exceeding 20cm in depth including consolidating each deposited layer by ramming, watering, etc & disposig of surplus excavated soil as directed within a lead of 50m. Pipes, cables etc. exceeding 80mm dia. But not exceeding 300 mm dia.

Providing, laying and joining glazed stone ware pipes class SP-1 with stiff mixture of cement mortar in the proportion of 1:1 (1 cement : 1 fine sand) including testing of joints etc. complete. 150mm diameter

Providing & laying cement concrete 1:5:10 (1 cement :5 coarse sand :10 graded stone aggregate 40mm nominal size) alround S.W. Pipes including bed concrete as per standard design. 150mm diameter S.W. Pipe

Constructing brick masonry manhole in cement mortar 1:4 (1 cement :4 coarse sand) RCC top slab with 1:2:4 mix (1 cement :2 coarse sand :4 graded stone aggregate 20mm nominal size), foundation concrete 1:4:8 mix (1 cement :4 coarse sand :8 graded stone aggregate 40mm nominal size) inside plastering 12mm thick with cement mortar 1:3 (1 cement :3 coarse sand) finished with floating coat fo neat cement and making channels in cement concrete 1:2:4 (1 cement :2 coarse sand :4 graded stone aggregate 20mm nminal size) finished with a floating coat of neat cement complete as per standard design Inside size 90x80cms and 45cms deep including CI cover with frame (light duty) 455x610mm internal diamensions total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15kg). With FPS bricks of class designation 75 (i) For Sewer Line

Same as Item above item above but for Extra for depth of man hole size 90x80 cm

Providing M.S. foot rests including fixing in manholes with 20x20x10 cm cement concrete blocks 1:3:6 (1 cement:3 coarse sand :6graded stone aggregate 20 mm nominal size) as per standard design With 20x20 mm square bar

Supply and fixing of UPVC S.W.R. pipe type-B confirming to IS-13592 including jointing the pipes with rubber ring,lubricant and UPVC SWR cupler confirming to IS-14735. Also including excavation of treanches cutting of walls and holes and repairing the walls,floors and refilling the trenches as before with supply and cost of other fIttlings such as elbow,bend,tee and y-tee,Cowel including supply of all marerial labour and T&P. Required for proper completion of work. 75 mm O.D.

Same as item 171 but for 110 mm O.D.

Supply and fixing of UPVC S.W.R. pipe nahni trap size 100x75,110/90 mm confirming to IS-14735 self cleaning design fixed in PCC 1:2:4 and supply and fixing of 125 mm dia heavy duty CP brass jali.

PRIMA Floor Drain Traps having Square Shape and made up of SS 304 ((PGR-3910) SS Anti Cockroach Jali Square - 5”) Electrical Works of Toilet Block in Consolidated Public Amenities Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular type switch, modular plate, suitable size G.I. box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. Group C

Wiring for circuit/sub-main wiring along with earth wire with the following size of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2X1.5 sqmm + 1x1.5 sqmm earth wire

Same as item 175 but for 2X4.0 sqmm + 1x 4.0 sqmm earth wire

Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch,connection etc. as required.

Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch,connection etc. as required.

Supplying and fixing 3 pin 5 A ceiling rose on the existing junction box/woodedn block including connection etc. as required.

Instalation,testing & commissioning of wall bracket /ceiling fittings of all sizes and shapes containing upto two GLSCFL/LED lamps per fitting, complete with all accessories including connection etc. as required.

Numbering of ceiling fan/ exhaust fan/ fluorescent fittings as required.

Installation of exhaust fan in the existing opening, including making good the damage, connections, testing, commissioning etc. as required. upto 450 mm sweep.

Extra for fixing the louvers / shutters complete with frame fro exhaust fans of all sizes.

DISTRIBUTION BOARDS, MCB'S & ISOLATORS : Supplying and fixing following way, single pole and neutral sheet steel, MCB distribution board, 240 V on surface /recess complete with , tinned copper busbar, neutral busbar, earth bar, din bar, interconnections, powder painted including earthing etc. as required (But without MCB / RCCB / Isolators). 8 way, Double door

Supplying and fixing 5 amps. to 32 amps. rating, 240 volts `C' series, miniature circuit breaker (MCB) suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. Single Pole

Same as item 186 but for Double Pole

Supplying and fixing single pole, blanking plate in the existing MCB DB complete etc. as required.

Earthing with GI earth pipe, 600 mm X 600 mm X 6 mm thick including accessories and providing masonary enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc, with charcoal/cock and salt as required.

Supplying and Laying of 25 mm X 3 mm G.I strip at 0.50 metre below ground as strip earth electrode, including connection / terminating with nut, bolt, spring, washer etc. as required.( jointing shall be done by overlapping and with 2 sets of G.I. nut bolt & spring washer spaced at 50mm)

Laying of one number PVC insulated and PVC sheathed/XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc. as required. Upto 35 sq. mm

Supplying & making end termination with brass compression gland and aluminium lugs for the following size of PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.2 X 10 sqmm. (19mm)

Supply of following size of 1.1 KV grade multicore aluminium conductor PVC sheathed armoured cable as per IS 1554. 10 sqmm 2 core Make Polycab or Eq (Cable)

PYFLEX 2 Core 6.0 sq. mm PVC Copper Circular Sheathed Cable with Rigid Conductor 10 sqmm 2 core Make Polycab or Eq

SUPPLY OF LIGHT FIXTURES : Supply of 1X17 W mirror light complete in all respects.

JAQUAR LIGHTING LED Luminaire (Recessed Luminaire) Rating - 12 Watt (LEPO01R012XW) Supply of recess/Surface/Pendent mounting round 10 to 15 watt LED Down Lighter having Powder coated die cast aluminium housing with heat sink, diffuser/Reflector and driver set complete in all respects.Make-Philips or Eq

LED Luminaire (Recessed Luminaire) Rating - 36 Watt Supply of AC 230/250 Volts, 50 Hz 55w 1400 rpm exhaust fans including providing nuts, bolts, mounting frame and other accessories including connections etc. complete as required. BAJAJ Exhaust Fan 300 mm (BAJAJ Bahar 300 mm Metallic Grey Dom Ex Fan) WIPRO/ Havells Crompton or eqlt

Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil

Filling of Carted Earth

Preparation and consolidation of sub grade with power road roller of 8 to 12 tonne capacity after excavating earth to an average of 22.5 cm depth, dressing to camber and consolidating with road roller including making good the undulations etc. and re-rolling the sub grade and disposal of surplus earthwith lead upto 50 metres.

Supplying and stacking at site. 53 mm to 22.4 mm size stone aggregate

Laying, spreading and compacting stone aggregate of specified sizes to WBM specifications in uniform thickness, hand picking, rolling with 3 wheeled road/vibratory roller 8-10 tonne capacity in stages to proper grade and camber, applying and brooming requisite type of screening / binding material to fill up interstices of coarse aggregate, watering and compacting to the required density .

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Providing and laying C.C. pavement of mix M-25 with ready mixed concrete from batching plant. The ready mixed concrete shall be laid and finished with screed board vibrator , vacuum dewatering process and finally finished by floating, brooming with wire brush etc. complete as per specifications and directions of Engineer-in-charge. (The panel shuttering work shall be paid for separately). Deduct for using of M-20 grade concrete instead of M-25 grade concrete in C.C. pavement.

Providing and fixing pre-moulded joint filler in expansion joints of RCC roads / CC pavements after making the joints dust free with high pressure air jet cleaners, all complete as per direction of the Engineer-in-Charge. (Pre-moulded joint fillers shall be made of bitumen hot sealing compound impregnated fibre board having impregnation more than 35%, conforming to IS:1838 for fibre board and IS: 1834 for hot sealing bitumen compound grade A.)

Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge.

Brick Work and Plaster Work Brick edging in full brick width and half brick depth including excavation, refilling and disposal of surplus earth lead upto 50 metres. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)

Providing Retro-reflective regulatory sign board of size 900 mm dia metre made out of 2 mm thick aluminium sheet, face to be fully covered with high intensity encapsulated lens type retro -reflective sheeting as approved by Engineer-in-charge . Letter, symbols, borders etc. will be as per IRC - 67 with required colour scheme on the boards and with the high intensity grade A. The aluminium sheet to be riveted to M.S. frame of angle iron of size 40x40x4 mm. The boards will be fixed to 1 No. 50x50 mm square post made of M.S. angle 50x50x4 mm, 4 m long welded to the frame with adequate anti-theft arrangement .Sheet work to be painted with two or more coats of synthetic enamel paint over an under coat (primer) and back side of aluminium sheet to be painted with two or more coats of epoxy paint including appropriate priming coat complete in all respects as per direction of Engineer-in-charge.

Providing and applying 2.5 mm thick road marking strips (retro- reflective) of specified shade/ colour using hot thermoplastic material by fully/ semi automatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreign material etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications.

Solar street light P & C Electric 7 25 Watt White LED type P & C ElectricR (PNC-SSL-25W) Power output of PV Module ≥ 75 Wp at 16.4 ±0.2 Volt at STC Battery capacity ≥ 12.8 V (nominal), 30 Ah at STC (1 day autonomy) Type of LED (Light source) 25 Watt White LED type Ingress protection IP65 or better Indicators on the system: Provided with 2 LED indicators: a green light to indicate charging in progress and a red LED to indicate deep discharge condition of the battery. The green LED glow only when the battery is actually being charged. Nominal bore size of tube / Thickness of tube: 50 mm / 4.5mm Height of pole (in m): 7 Battery box: Battery included in the luminaire enclosure, with water proof (IP65 or better) and corrosion resistant

Earth Works Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, for all lift, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc.

Concrete Work Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion) : Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos/Lindane E.C. 20% with 1% concentration

Centering and shuttering including strutting, propping etc. and removal of form for all heights : Foundations, footings, bases of columns, etc. for mass concrete

Same as item 217 but for Columns, Pillars, Piers, Abutments, Posts and Struts

Same as item 217 but for Lintels, beams, plinth beams, girders, bressumers and cantilevers with water proof ply 12 mm thick

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Foundation

Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level : 1:1.5:3 (1 cement : 1.5 coarse sand (zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources) Column

Same as item 221 but for Plinth Beam

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). Column

Same as item 223 but for beam

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Brick Work and Plaster Work Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:4 (1 cement : 4 coarse sand)

Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:6 (1 cement : 6 coarse sand)

15 mm cement plaster on rough side of single or half brick wall of mix: 1:4 (1 cement: 4 coarse sand)

Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.).

Mild steel or iron work of small sizes and sections such as holding down bolts, hold fasts, tie rods, gratings etc. (when not included in an over all rates) wrought to required form, including supply of steel, bolts, nuts and wastage etc. and their fixing required for proper completion of the work.

Mild Steel or iron work in heavy sizes such as trusses, builts up gates, door frames, records racks, roof works, gates etc. wrought to required form, including drilling holes, rivetting or welding where necessary, and also including supply of steel, bolts, nuts, and wastages etc., and their fixing required for completion of the work.

Surface Finishes Finishing walls with 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives. New work (Two or more coats applied @ 1.43 litre/ 10 sqm. Over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm.

Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.

Apply priming coat over new steel and other metal surface after and Including preparing the surface throughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes, fine steel /wood scrappers sand papering and knotting including cost of all materials, labour and T&P etc required for proper completion of the work. Painting first coat over priming coat (but excluding cost of priming coat) on wood or steel and other metal surface with superior synthetic enamel standard make brushing to give an even shade and finish and Including cleaning the surface of all dirt dust and other foreign matter sand papering and stripping incuding cost of all materials, labour, T&P etc required for the proper completion of the work. Same as in item above but for every subsequent coat after first coat on wood or steel surface with paint of : (iii) Superior quality

supply and installation of Submersible Pump (2HP) for water supply arrangement including Boring 150 mm Dia, depth 35-40 , lowering with all necessary fittings complete in all respect such as switch board wire plug itc for the proper fuction of it

Grassing of first quality

Plantation of Aesthetic Plants Having Hight more than one miter including Digging of holes cost of manure and spreeding of sludge.

Mildsteel Tree Guard of hight 1.5 mt, dia of 650 mm

gautam and company (BID ID -5374153)

M/S SHRI PRAKASH SHUKLA (BID ID -5373002)