Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.7 LAccepted-AOC | L1 | Accepted-AOC BEING L1 | |
| 2 | L2₹30.0 L+₹2.3 L (8.18%)Rejected-Finance 441 G F LIG FLATS PH 2 SEC 14 PKT 3 DWARKA NEW DELHI SECTOR 14 DWARKA DWARKA SOUTH WEST DELHI DELHI 110078 | SOUTH WEST DELHI | DELHI | 110078 | L2 | Rejected-Finance Not Being L1 | |
| 3 | L3₹31.5 L+₹3.8 L (13.6%)Rejected-Finance | L3 | Rejected-Finance Not Being L1 | |
| 4 | L4₹32.8 L+₹5.1 L (18.4%)Rejected-Finance | L4 | Rejected-Finance Not Being L1 | |
| 5 | L5₹35.0 L+₹7.3 L (26.3%)Rejected-Finance | L5 | Rejected-Finance Not Being L1 |
| Sl No | Description | Qty | Unit | Iconic Engineers L3 | Saini Enterprises L8 | M P TYAGI ENGINEERS AND CONTRACTORS L6 | OMVIN ENTERPRISES LLP L2 | Vardhman Airport Solutions Private Limited L7 | J P Enterprises L4 | ASHUTOSH BUILDERS L5 | Pall Associates L1 |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 1.00 | Supply, installation, testing & commissioning in replacement LT panel board In door type, wall mounted of suitable size for operation on 415 volts, AC 3 phase, 4 wire, 50 Hz electric supply system, made out of CRCA sheet outer box thickness 2.0 mm, side covers with hinged doors & proper locking arrangement, rubber gasket on front and back door to make it dust and vermin proof, powder coated , The cubicle shall have control wiring with minimum size: 1.5 SQmm of copper cable including M&L for fixing / grouting the panel to wall and required cable connection with necessary double compression brass gland and cable end sockets, complete comprising of following accessories all as specified and any other items required for smooth functioning of VFD starter Panel is deemed to be included in the rate quoted for the items and as directed by the Engr-in-charge.( Note:-All type Test Certificates and Design varification with switch gears ( ACB & MCCB) as per confirming to IS/ IEC: 61439/2011 Part-1 and part -2 with short circuit test at 65 KA, should be submitted by the contractor before executing the job.) also having built in single phase preventer for 5 HP capacity fan motor complete with following specifications:-
INCOMING
(i) MCB 25A 10kA (incoming)-01 No.
(ii) Ammeter, Voltmeter and CTs- 01 set
(iii) RYB indicating lamps LED type- 03 Nos
(iv) MCB SP 6A -03 Nos | 4 | Each Job | 67,200 ₹2,68,800 | 1,15,000 ₹4,60,000 | 89,999 ₹3,59,996 | 65,000 ₹2,60,000 | 88,554 ₹3,54,216 | 1,20,000 ₹4,80,000 | 62,999 ₹2,51,996 Lowest | 65,000 ₹2,60,000 |
| 1.01OUTGOING (i) FASD Starter 5 HP -01 No. (ii) Contactor 3P 12 A -03 No. (iii) O/L relay 6-10A -01 No. (iv) ON-TRIP indicator - 02 No. (v) Start/stop push button - 02 No. (vi) MCB SP 6A,10kA- 01 No (vii) Add on Aux Block 1 NO + 1 NC - 02 set (viii) Single Phase Preventer - 01 No (ix) Auto manual selector switch - 01 No. (x) Star Delta Timer - 01 No. (xi) Variable Frequency Drive suitable for 5 HP motor -01 No. (xii) Glass relay 5 A, 11 PIN -01 No. (xiii) Control Wiring, busbar,nut, bolts, washers , auxillary contacts etc alongwith all misc connected items are deemed to be included in quoted rate. Note:- Contractor need to submit drawing of panel alongwith bill of quantities for approval before starting execution of work. | |||||||||||
| 2.00 | Supply, installation, testing & commissioning in replacement LT panel board In door type, wall mounted of suitable size for operation on 415 volts, AC 3 phase, 4 wire, 50 Hz electric supply system, made out of CRCA sheet outer box thickness 2.0 mm, side covers with hinged doors & proper locking arrangement, rubber gasket on front and back door to make it dust and vermin proof, powder coated , The cubicle shall have control wiring with minimum size: 1.5 SQmm of copper cable including M&L for fixing / grouting the panel to wall and required cable connection with necessary double compression brass gland and cable end sockets, complete comprising of following accessories all as specified and any other items required for smooth functioning of VFD starter Panel is deemed to be included in the rate quoted for the items and as directed by the Engr-in-charge.( Note:-All type Test Certificates and Design varification with switch gears ( ACB & MCCB) as per confirming to IS/ IEC: 61439/2011 Part-1 and part -2 with short circuit test at 65 KA, should be submitted by the contractor before executing the job.) also having built in single phase preventer for 7.5 HP capacity fan motor complete with following specifications:-
INCOMING
(i) MCB 32A 10kA (incoming)-01 No.
(ii) Ammeter, Voltmeter and CTs- 01 set
(iii) RYB indicating lamps LED type- 03 Nos
(iv) MCB SP 6A -03 Nos | 6 | Each Job | 73,860 ₹4,43,160 | 1,15,000 ₹6,90,000 | 99,999 ₹5,99,994 | 70,000 ₹4,20,000 Lowest | 94,158 ₹5,64,948 | 1,00,000 ₹6,00,000 | 74,999 ₹4,49,994 | 70,000 ₹4,20,000 Lowest |
| 2.01OUTGOING (i) FASD Starter 7.5 HP -01 No. (ii) Contactor 3P 18 A -03 No. (iii) O/L relay 9-15A -01 No. (iv) ON-TRIP indicator - 02 No. (v) Start/stop push button - 02 No. (vi) MCB SP 6A,10kA- 01 No (vii) Add on Aux Block 1 NO + 1 NC - 02 set (viii) Single Phase Preventer - 01 No (ix) Auto manual selector switch - 01 No. (x) Star Delta Timer - 01 No. (xi) Variable Frequency Drive suitable for 7.5 HP motor -01 No.Make:- Danfoss (xii) Glass relay 5 A, 11 PIN -01 No. (xiii) Control Wiring, busbar,nut, bolts, washers , auxillary contacts etc alongwith all misc connected items are deemed to be included in quoted rate. Note:- Contractor need to submit drawing of panel alongwith bill of quantities for approval before starting execution of work. | |||||||||||
| 3.00 | Supply, installation, testing & commissioning in replacement LT panel board In door type, wall mounted of suitable size for operation on 415 volts, AC 3 phase, 4 wire, 50 Hz electric supply system, made out of CRCA sheet outer box thickness 2.0 mm, side covers with hinged doors & proper locking arrangement, rubber gasket on front and back door to make it dust and vermin proof, powder coated , The cubicle shall have control wiring with minimum size: 1.5 SQmm of copper cable including M&L for fixing / grouting the panel to wall and required cable connection with necessary double compression brass gland and cable end sockets, complete comprising of following accessories all as specified and any other items required for smooth functioning of VFD starter Panel is deemed to be included in the rate quoted for the items and as directed by the Engr-in-charge.( Note:-All type Test Certificates and Design varification with switch gears ( ACB & MCCB) as per confirming to IS/ IEC: 61439/2011 Part-1 and part -2 with short circuit test at 65 KA, should be submitted by the contractor before executing the job.) also having built in single phase preventer for 10 HP capacity fan motor complete with following specifications:-
INCOMING
(i) MCB 32A 10kA (incoming)-01 No.
(ii) Ammeter, Voltmeter and CTs- 01 set
(iii) RYB indicating lamps LED type- 03 Nos
(iv) MCB SP 6A -03 Nos | 6 | Each Job | 68,670 ₹4,12,020 Lowest | 1,15,000 ₹6,90,000 | 1,19,999 ₹7,19,994 | 70,000 ₹4,20,000 | 99,852 ₹5,99,112 | 1,15,000 ₹6,90,000 | 82,999 ₹4,97,994 | 75,000 ₹4,50,000 |
| 3.01OUTGOING (i) FASD Starter 10 HP -01 No. (ii) Contactor 3P 22 A -03 No. (iii) O/L relay 9-15A -01 No. (iv) ON-TRIP indicator - 02 No. (v) Start/stop push button - 02 No. (vi) MCB SP 6A,10kA- 01 No (vii) Add on Aux Block 1 NO + 1 NC - 02 set (viii) Single Phase Preventer - 01 No (ix) Auto manual selector switch - 01 No. (x) Star Delta Timer - 01 No. (xi) Variable Frequency Drive suitable for 10 HP motor -01 No. Make - Danfoss (xii) Glass relay 5 A, 11 PIN -01 No. (xiii) Control Wiring, busbar,nut, bolts, washers , auxillary contacts etc alongwith all misc connected items are deemed to be included in quoted rate. Note:- Contractor need to submit drawing of panel alongwith bill of quantities for approval before starting execution of work | |||||||||||
| 4.00 | Supply, installation, testing & commissioning in replacement LT panel board In door type, wall mounted of suitable size for operation on 415 volts, AC 3 phase, 4 wire, 50 Hz electric supply system, made out of CRCA sheet outer box thickness 2.0 mm, side covers with hinged doors & proper locking arrangement, rubber gasket on front and back door to make it dust and vermin proof, powder coated , The cubicle shall have control wiring with minimum size: 1.5 SQmm of copper cable including M&L for fixing / grouting the panel to wall and required cable connection with necessary double compression brass gland and cable end sockets, complete comprising of following accessories all as specified and any other items required for smooth functioning of VFD starter Panel is deemed to be included in the rate quoted for the items and as directed by the Engr-in-charge.( Note:-All type Test Certificates and Design varification with switch gears ( ACB & MCCB) as per confirming to IS/ IEC: 61439/2011 Part-1 and part -2 with short circuit test at 65 KA, should be submitted by the contractor before executing the job.) also having built in single phase preventer for 12 HP capacity fan motor complete with following specifications:-
INCOMING
(i) MCB 40A 10kA (incoming)-01 No.
(ii) Ammeter, Voltmeter and CTs- 01 set
(iii) RYB indicating lamps LED type- 03 Nos
(iv) MCB SP 6A -03 Nos | 4 | Each Job | 93,700 ₹3,74,800 | 1,30,000 ₹5,20,000 | 1,49,999 ₹5,99,996 | 84,000 ₹3,36,000 Lowest | 1,19,649 ₹4,78,596 | 1,00,000 ₹4,00,000 | 95,499 ₹3,81,996 | 95,000 ₹3,80,000 |
| 4.01OUTGOING (i) FASD Starter 12 HP -01 No. (ii) Contactor 3P 22 A -03 No. (iii) O/L relay 14-23A -01 No. (iv) ON-TRIP indicator - 02 No. (v) Start/stop push button - 02 No. (vi) MCB SP 6A,10kA- 01 No (vii) Add on Aux Block 1 NO + 1 NC - 02 set (viii) Single Phase Preventer - 01 No (ix) Auto manual selector switch - 01 No. (x) Star Delta Timer - 01 No. (xi) Variable Frequency Drive suitable for 12 HP motor -01 No.Make- Danfoss (xii) Glass relay 5 A, 11 PIN -01 No. (xiii) Control Wiring, busbar,nut, bolts, washers , auxillary contacts etc alongwith all misc connected items are deemed to be included in quoted rate. Note:- Contractor need to submit drawing of panel alongwith bill of quantities for approval before starting execution of work. | |||||||||||
| 5.00 | Supply, installation, testing & commissioning in replacement LT panel board In door type, wall mounted of suitable size for operation on 415 volts, AC 3 phase, 4 wire, 50 Hz electric supply system, made out of CRCA sheet outer box thickness 2.0 mm, side covers with hinged doors & proper locking arrangement, rubber gasket on front and back door to make it dust and vermin proof, powder coated , The cubicle shall have control wiring with minimum size: 1.5 SQmm of copper cable including M&L for fixing / grouting the panel to wall and required cable connection with necessary double compression brass gland and cable end sockets, complete comprising of following accessories all as specified and any other items required for smooth functioning of VFD starter Panel is deemed to be included in the rate quoted for the items and as directed by the Engr-in-charge.( Note:-All type Test Certificates and Design varification with switch gears ( ACB & MCCB) as per confirming to IS/ IEC: 61439/2011 Part-1 and part -2 with short circuit test at 65 KA, should be submitted by the contractor before executing the job.) also having built in single phase preventer for 15 HP capacity fan motor complete with following specifications:-
INCOMING
(i) MCB 40A 10kA (incoming)-01 No.
(ii) Ammeter, Voltmeter and CTs- 01 set
(iii) RYB indicating lamps LED type- 03 Nos
(iv) MCB SP 6A -03 Nos | 4 | Each Job | 93,800 ₹3,75,200 | 1,46,000 ₹5,84,000 | 1,99,999 ₹7,99,996 | 84,000 ₹3,36,000 Lowest | 1,20,719 ₹4,82,876 | 98,000 ₹3,92,000 | 1,08,019 ₹4,32,076 | 95,000 ₹3,80,000 |
| 5.01OUTGOING (i) FASD Starter 15 HP -01 No. (ii) Contactor 3P 25 A -03 No. (iii) O/L relay 14-23A -01 No. (iv) ON-TRIP indicator - 02 No. (v) Start/stop push button - 02 No. (vi) MCB SP 6A,10kA- 01 No (vii) Add on Aux Block 1 NO + 1 NC - 02 set (viii) Single Phase Preventer - 01 No (ix) Auto manual selector switch - 01 No. (x) Star Delta Timer - 01 No. (xi) Variable Frequency Drive suitable for 15 HP motor -01 No.Make- Danfoss (xii) Glass relay 5 A, 11 PIN -01 No. (xiii) Control Wiring, busbar,nut, bolts, washers , auxillary contacts etc alongwith all misc connected items are deemed to be included in quoted rate. Note:- Contractor need to submit drawing of panel alongwith bill of quantities for approval before starting execution of work | |||||||||||
Tender Value
₹45 L
EMD Value
₹90,000
Closing Date
28 Jun 2025, 6:00 pmClosed
GE E/M RR HOSPITAL DELHI CANTT-10
GE E/M RR HOSPITAL DELHI CANTT-10
REPAIR/ MAINT OF AHU PANELS, AC PLANT, LT PANEL ALONGWITH ALLIED WORKS AT AHRR UNDER GE E/M RR HOSPITAL DELHI CANTT-10.
2025_MES_711145_1
GE/H/T-10/ 2025-26
Open Tender
Electrical and Maintenance Works
Item Rate
180 days
GE E/M RR HOSPITAL DELHI CANTT-10
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
GE E/M RR HOSPITAL DELHI CANTT-10
₹90,000
Yes
29 Aug 2025
29 May 2025
30 Jun 2025
29 May 2025
28 Jun 2025
12 Jun 2025
Amount
Supply, installation, testing & commissioning in replacement LT panel board In door type, wall mounted of suitable size for operation on 415 volts, AC 3 phase, 4 wire, 50 Hz electric supply system, made out of CRCA sheet outer box thickness 2.0 mm, side covers with hinged doors & proper locking arrangement, rubber gasket on front and back door to make it dust and vermin proof, powder coated , The cubicle shall have control wiring with minimum size: 1.5 SQmm of copper cable including M&L for fixing / grouting the panel to wall and required cable connection with necessary double compression brass gland and cable end sockets, complete comprising of following accessories all as specified and any other items required for smooth functioning of VFD starter Panel is deemed to be included in the rate quoted for the items and as directed by the Engr-in-charge.( Note:-All type Test Certificates and Design varification with switch gears ( ACB & MCCB) as per confirming to IS/ IEC: 61439/2011 Part-1 and part -2 with short circuit test at 65 KA, should be submitted by the contractor before executing the job.) also having built in single phase preventer for 5 HP capacity fan motor complete with following specifications:- INCOMING (i) MCB 25A 10kA (incoming)-01 No. (ii) Ammeter, Voltmeter and CTs- 01 set (iii) RYB indicating lamps LED type- 03 Nos (iv) MCB SP 6A -03 Nos
Supply, installation, testing & commissioning in replacement LT panel board In door type, wall mounted of suitable size for operation on 415 volts, AC 3 phase, 4 wire, 50 Hz electric supply system, made out of CRCA sheet outer box thickness 2.0 mm, side covers with hinged doors & proper locking arrangement, rubber gasket on front and back door to make it dust and vermin proof, powder coated , The cubicle shall have control wiring with minimum size: 1.5 SQmm of copper cable including M&L for fixing / grouting the panel to wall and required cable connection with necessary double compression brass gland and cable end sockets, complete comprising of following accessories all as specified and any other items required for smooth functioning of VFD starter Panel is deemed to be included in the rate quoted for the items and as directed by the Engr-in-charge.( Note:-All type Test Certificates and Design varification with switch gears ( ACB & MCCB) as per confirming to IS/ IEC: 61439/2011 Part-1 and part -2 with short circuit test at 65 KA, should be submitted by the contractor before executing the job.) also having built in single phase preventer for 7.5 HP capacity fan motor complete with following specifications:- INCOMING (i) MCB 32A 10kA (incoming)-01 No. (ii) Ammeter, Voltmeter and CTs- 01 set (iii) RYB indicating lamps LED type- 03 Nos (iv) MCB SP 6A -03 Nos
Supply, installation, testing & commissioning in replacement LT panel board In door type, wall mounted of suitable size for operation on 415 volts, AC 3 phase, 4 wire, 50 Hz electric supply system, made out of CRCA sheet outer box thickness 2.0 mm, side covers with hinged doors & proper locking arrangement, rubber gasket on front and back door to make it dust and vermin proof, powder coated , The cubicle shall have control wiring with minimum size: 1.5 SQmm of copper cable including M&L for fixing / grouting the panel to wall and required cable connection with necessary double compression brass gland and cable end sockets, complete comprising of following accessories all as specified and any other items required for smooth functioning of VFD starter Panel is deemed to be included in the rate quoted for the items and as directed by the Engr-in-charge.( Note:-All type Test Certificates and Design varification with switch gears ( ACB & MCCB) as per confirming to IS/ IEC: 61439/2011 Part-1 and part -2 with short circuit test at 65 KA, should be submitted by the contractor before executing the job.) also having built in single phase preventer for 10 HP capacity fan motor complete with following specifications:- INCOMING (i) MCB 32A 10kA (incoming)-01 No. (ii) Ammeter, Voltmeter and CTs- 01 set (iii) RYB indicating lamps LED type- 03 Nos (iv) MCB SP 6A -03 Nos
Supply, installation, testing & commissioning in replacement LT panel board In door type, wall mounted of suitable size for operation on 415 volts, AC 3 phase, 4 wire, 50 Hz electric supply system, made out of CRCA sheet outer box thickness 2.0 mm, side covers with hinged doors & proper locking arrangement, rubber gasket on front and back door to make it dust and vermin proof, powder coated , The cubicle shall have control wiring with minimum size: 1.5 SQmm of copper cable including M&L for fixing / grouting the panel to wall and required cable connection with necessary double compression brass gland and cable end sockets, complete comprising of following accessories all as specified and any other items required for smooth functioning of VFD starter Panel is deemed to be included in the rate quoted for the items and as directed by the Engr-in-charge.( Note:-All type Test Certificates and Design varification with switch gears ( ACB & MCCB) as per confirming to IS/ IEC: 61439/2011 Part-1 and part -2 with short circuit test at 65 KA, should be submitted by the contractor before executing the job.) also having built in single phase preventer for 12 HP capacity fan motor complete with following specifications:- INCOMING (i) MCB 40A 10kA (incoming)-01 No. (ii) Ammeter, Voltmeter and CTs- 01 set (iii) RYB indicating lamps LED type- 03 Nos (iv) MCB SP 6A -03 Nos
Supply, installation, testing & commissioning in replacement LT panel board In door type, wall mounted of suitable size for operation on 415 volts, AC 3 phase, 4 wire, 50 Hz electric supply system, made out of CRCA sheet outer box thickness 2.0 mm, side covers with hinged doors & proper locking arrangement, rubber gasket on front and back door to make it dust and vermin proof, powder coated , The cubicle shall have control wiring with minimum size: 1.5 SQmm of copper cable including M&L for fixing / grouting the panel to wall and required cable connection with necessary double compression brass gland and cable end sockets, complete comprising of following accessories all as specified and any other items required for smooth functioning of VFD starter Panel is deemed to be included in the rate quoted for the items and as directed by the Engr-in-charge.( Note:-All type Test Certificates and Design varification with switch gears ( ACB & MCCB) as per confirming to IS/ IEC: 61439/2011 Part-1 and part -2 with short circuit test at 65 KA, should be submitted by the contractor before executing the job.) also having built in single phase preventer for 15 HP capacity fan motor complete with following specifications:- INCOMING (i) MCB 40A 10kA (incoming)-01 No. (ii) Ammeter, Voltmeter and CTs- 01 set (iii) RYB indicating lamps LED type- 03 Nos (iv) MCB SP 6A -03 Nos
Supply, installation, testing & commissioning in replacement LT panel board In door type, wall mounted of suitable size for operation on 415 volts, AC 3 phase, 4 wire, 50 Hz electric supply system, made out of CRCA sheet outer box thickness 2.0 mm, side covers with hinged doors & proper locking arrangement, rubber gasket on front and back door to make it dust and vermin proof, powder coated , The cubicle shall have control wiring with minimum size: 1.5 SQmm of copper cable including M&L for fixing / grouting the panel to wall and required cable connection with necessary double compression brass gland and cable end sockets, complete comprising of following accessories all as specified and any other items required for smooth functioning of VFD starter Panel is deemed to be included in the rate quoted for the items and as directed by the Engr-in-charge.( Note:-All type Test Certificates and Design varification with switch gears ( ACB & MCCB) as per confirming to IS/ IEC: 61439/2011 Part-1 and part -2 with short circuit test at 65 KA, should be submitted by the contractor before executing the job.) also having built in single phase preventer for 20 HP capacity fan motor complete with following specifications:- INCOMING (i) MCB 63A 4P 10kA (incoming)-01 No. (ii) Ammeter, Voltmeter and CTs- 01 set (iii) RYB indicating lamps LED type- 03 Nos (iv) MCB SP 6A -03 Nos
M&L for replacement of LT armoured copper cable of size 185 sqmm (nominal area) ,PVC insulated 3 core unsheathed and stranded copper conductor cable fixed to wall ,including thimble,lux,clamp ,saddles etc complete all as specified and directed by Engr-in-Charge.
Material & labour for earthing with Galvanised Steel earth plate electrode 60cm x 60cm x 6.3mm thick buried directly in ground vertically at a depth not less than 2.25metre below normal ground level with top edge of earth plate at a depth not less than 1.5 metre below normal ground level, earth plate surrounded from all sides by 15cm thick packed layer of charcoal dust and common salt filling in alternate layers and electrode connections by using Galvanised Iron strip of 32 x 6 mm as earthing lead (upto the body of the equipment) by means of bolts, nuts, check nuts and washers made of galvanised iron and thimbles and protected by light grade 40mm dia GI pipe connected up to main DB/LT Panel /Test point and GI pipe medium grade 20mm bore for watering and including funnel , wire mesh , RCC pit cover and PCC chamber pit with PCC (1:3:6) type C-2 using 40mm graded stone aggregate, including excavation and earth work in any type of soil , returning , filling in approved soil and disposal of surplus soil to a distance not exceeding 50m all as specified and shown in electrical plate No 3 of SSR 1991(Part-I) complete all as specified and directed by Engr-in-Charge.
Supply and laying in repair of XLPE insulated,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 3.5 core 50 sqmm complete all as specified and directed by Engr-in-Charge.
Supply and laying in replacement of XLPE insulated,armoured heavy duty electric cable with aluminium conductor 1100 volts grade cross sectional area 3.5 core 35 sqmm complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of MCCB 4 pole 200 amps, 36 kA adjustable and thermal setting complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of MCCB 4 pole 160 amps, 36 kA adjustable and thermal setting complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of MCCB 4 pole 100 amps, 36 kA adjustable and thermal setting complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of MCCB 4 pole 63 amps, 36 kA adjustable and thermal setting complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of contactor MNX 12 240 volts complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of contactor MNX 18 415 volts complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of contactor MNX 25 240 volts complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of contactor MNX 32 240 volts complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of contactor MNX 40 240 volts complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of contactor MNX 50 240 volts complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of contactor MNX 70 240 volts complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of thermal overload relay 6-32 A complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of indicator lamp RYB complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of PVC copper cable 4 sqmm 3 core 415 V complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of PVC fins any type complete all as specified and directed by Engr-in-Charge.
Supply and fixing in replacement of push button complete all as specified and directed by Engr-in-Charge.
OMVIN ENTERPRISES LLP (BID ID -3326793)
Iconic Engineers (BID ID -3329463)
J P Enterprises (BID ID -3339712)
ASHUTOSH BUILDERS (BID ID -3329412)
M P TYAGI ENGINEERS AND CONTRACTORS (BID ID -3323638)
Vardhman Airport Solutions Private Limited (BID ID -3338935)
Saini Enterprises (BID ID -3331589)
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .