REPAIRS PAINTING TO CERTAIN STEEL FURNITURE UNDER GE MAINT INFANTRY SCHOOL MHOW

Amount

Removing of following existing unserviceable steel components of various MES / DB/FD/TP/MAP furniture items carefully without disturbing the adjoining parts and S&F new components in lieu of dismantled components including tightening the joints, screwing, weldging, glueing, providing hinges,denting, placing every part in-tact , as applicable as per drawing Note : Work shall be executed where the furniture exist (i.e) at different User Units of GE (MIS) Mhow including BSO's Furniture Yard etc.

Almirah Large Steel :FD-67 / 1031/ TP/MAP

S&F Brass lever locks (Make-LICO/Rina/Nova/Harrison) rest all as per drawing

S&F CP Handle as per drawing

S&F Leg as per drawing

M&L for repair to existing door as specified including replacement of hinges

M&L for repair to existing shelf including welding as per drawing

M&L for replacement of shutter as per drawing including applying two coats of painting to match the body by using sprayer

M&L for replacement of looking mirror 5 mm thick (Modiguard/Saint Gobin) as per drawing

S&F new shelf as per drawing

Almirah Medium / Small Steel/glazed door FD-1032/FD-104(M)

S&F Brass lever locks (Make-LICO/Rina/Nova/Harrison) as per drawing

S&F CP Handle as per drawing

S&F Leg as per drawing

M&L for repair to door all as specified including replacement of hinges

M&L for Welding works wherever required as specifed and as directed by Engineer-in-charge

M&L for repair to existing shelf including necessary welding as required

S&F new shelf as per drawing

S&F glass pane as per drawing

Locker Steel : FD-1029/257

S&F CP handle as per drawing

S&F Stainless steel Hasp & Staple as per drawing

M&L for repairs to door/sides including replacement of hinges

S&F Brass lever locks (Make-LICO/Rina/Nova/Harrison) as per drawing

S&F Leg as per drawing

S&F CP Conduit pipe as per drawing

M&L for replacement of complete locking devices as per drawing

M&L for welding wherever required as directed by Engineer-in-Charge

Teapoy Varandah:FD-383/255

S&F Rubber shoe standard quality as per drawing

S&F 18mm thick Post forming top(PFT) exterior grade ( Make-Century/Greenply/Action tesa) provided on top of teapoy varandah complete all as per drawing

S&F 10 mm thick MS bar welded to each leg and one centre stiffner provided including welding works wherever required complete as directed by Engineer-in-Charge

Table Bed Side : FD/E6/MAP/15 (R) / HFD-2005

M&L for replacement of handle of drawer as per sample held with office

M&L for replacement of sides with 18 mm thick Pre laminated particle board exterior grade

S&F 18mm thick Post forming top (PFT) exterior grade ( Make-Century/Greenply/Action tesa) provided on top of table complete all as per drawing

M&L for replacement of drawers (lower/upper) with Standard quality telescopic channel (Make : Ebco/Hettich) as per drawing and as directed by Engineer-in-Charge

S&F PVC rubber shoe

M&L for painting of frame of with one coat of synthetic enamel paint

S&F new rail (top/bottom) 18 mm MS Square pipe 18 gauge thick irrespective of any specification as shown in drawing

Table Office Officer Steel :FD-84/1003

S&F Leg as per drawing

M&L for replacement of lock of drawer as per drawing (Make-LICO/RINA/Harrison )

M&L for repairs to drawer/shutter including tinkering / denting, welding, etc. all as shown and as specified and as directed

S&F Stiffeners as per drawing

S&F PVC Shoe standard quality all as per drawing

M&L for Welding the joints of legs / square tube as per drawing and as directed

S&F 18mm thick Post forming top(PFT) exterior grade ( Make-Century/Greenply/Action tesa) provided on top of table complete all as per drawing

Table 3x2 with and w/o drawer:FD-1007/1008

M&L for Welding wherever required all as specified and as directed by Engineer-in-Charge

S&F 18mm thick Post forming top(PFT) exterior grade ( Make-Century/Greenply/Action tesa) provided on top of table complete all as per drawing

M&L for repairs to drawer including tinkering / denting, painting, welding, etc. all as shown and as specified & as directed

S&F Rubber shoe standard quality as per drawing

S&F Lock as per drawing (Make :Lico/Rina/Nova)

Bed hard for JCO/Ors:CWE/M/TD/05/07/MAP-II/01

S&F 12 mm thick plywood top BWR grade (Make:Century ply/greenply/archidply) as per existing shape and size with 8 Nos of shunken nut /bolts ,appropriate hole shall be made with elecrtic drilling machine complete rest all as per drawing and as directed

S&F Hard rubber shoe standard quality as per drawing

Bed Hard Officer:FD/E6/MAP/ 8 (R)/TP

S&F 12 mm thick plywood top BWR grade (Make:Century ply/greenply/archidply) as per existing shape and size with 8 Nos of shunken nut/bolts ,appropriate hole shall be made with elecrtic drilling machine complete rest all as per drawing and as directed

S&F Hard rubber shoe standard quality as per drawing

M&L for replacement of particle board of head rest/Foot rest exterior grade with PVC edging complete as per drawing.

Table centre two tier:CWE/M/F/29/95

S&F 18mm thick Post forming top(PFT) exterior grade ( Make-Century/Greenply/Action tesa) provided on top of table complete all as per drawing

S&F Hard rubber shoe standard quality as per drawing

Rack steel Adjustable 3/6 tier:FD-106

M&L for welding wherever required as directed by Engineer-in-Charge

Repairs to shelves including tinkering/denting, welding, etc complete all as specified & as directed

Book case steel:FD-1028

S&F Glass pane 3 mm thick as per drawing

S&F Stainless steel handle as per sample

M&L for repairs to shelves/door including tinkering/denting, welding, etc. all as shown and as specified and as directed

S&F Lock as per drawing (Make:Lico/Rina /Nova/Kodia)

Chair Verandah :FD-19, FD-256, FD-359/MAP/11/MAP-II/15

S& F new Leg made with one piece of MS conduit pipe 16 gauge, 19mm dia including painting with two coats of synthetic enamel paint (white) over a coat of red oxide primer as per drawing.

M&L for Welding joints of leg of 19/20mm MS tube & other joints as per drawing and as directed by Engineer-in-Charge

S&F Hard rubber shoe as per drawing

M&L for Painting the entire frame including removing of old unserviceable cane from chair verandah & recaning the chairs etc with approved new plastic cane 4 mm wide half round as per Matt Pattern all as specified (colour of cane shall approved by Engineer-in-Charge/GE)

S&F Stiffner of size 12 mm square pipe 18 gauge x 16" with appropriate MS plate shall be welded below the seat of chairs for extra support to seat all as directed by Engineer-in-Charge

S&F PVC seat and back as per drawing (Make:AMKO/COMFO/Classic/HARMONY)

Chair writing :FD/E6/MAP/12

Taking out old/unserviceable seat and supply & fix new seat made of 12mm thick hot pressed plywood with acrylic/poly propylene fabric( cost not less than 300/Rm) and mouled polyurethene foam 50 mm thick and 50 density with PVC lipping all round complete all as shown on drawing.

Taking out old/unserviceable back and supply & fix new seat made of 12mm thick hot pressed plywood with acrylic/poly propylene fabric( cost not less than 300/Rm) and mouled polyurethene foam 50 mm thick and 50 density with PVC lipping all round complete all as shown on drawing.

Taking out old broken/unserviciable arm rest of chair writing steel , supply abd fix new PU arm rest as per drawing

M&L for preparation of old painted steel surface by scraping & rubbing and applying one coat of synthetic enamel paint (black) to MS tubular frame of chair writing steel.

Taking out unserviceable /broken frame and S&F new frame as per drawing duly painted and as directed by Engineer-in-Charge

Chair computer:FD/E6/MAP/01 CWE/M/F/02/02

S&F seat made of 12mm thick hot pressed plywood with fabric polyproplene /acrelic (cost of fabrics not less than Rs 300/ Rm) and mouled polyurethene foam 40 Density with PVC lipping all round complete all as shown on drawing.

S&F seat back made of 12mm thick hot pressed plywood with fabric polyproplene /acrelic (cost of fabrics not less than Rs 300/ Rm) and mouled polyurethene foam 40 Density with PVC lipping all round complete all as shown on drawing.

S&F arm rest made of polyurethene as per drawing

S&F complete pedestle assembly per drawing and directed.

S&F new twin wheel castors of required dia complete all as directed.

S&F chrome free cylinder tube fixed complete all as per drawing and directed.

Taking out old/unserviceable shifting locking lever assembely and Supply & fix new locking lever assembly all as shown in drawing complete all as directed.

Table computer:FD/E6/MAP/03 & CWE/M/F/01/02

S&F 18mm thick Post forming top (PFT) exterior grade ( Make:Century/Greenply/Action tesa) provided on top of table complete all as per drawing

M&L for removing old broken drawer with telescopic channel (Make :Ebco/Hettich) from existing table computer and providing new drawer 75mm deep made of 18mm thick pre-laminated particle board bonded with phenol fomaldehyde synthetic resin, exterior grade, one side with approved shade and balancing with lamination on other side alongwith Telescopic channel all as per drawing and as specified

M&L for removing of old broken key board tray with telescopic channel (Make :Ebco/Hettich) from existing computer table and providing new key board tray of 18mm thick pre-laminated particle board exterior grade, one side with approved shade and balancing with lamination on other side with including teak wood beading of 4mm x 18mm size fixed with Fevicol and Panel Pin and applying a coat of high glossy french polish matching to existing surfaces alongwith Telescopic channel all as per drawing and as specified

M&L for removing of old broken mouse tray with telescopic channel (Make :Ebco/Hettich) from existing table computer and providing new mouse tray made of 18mm thick pre-laminated particle board exterior grade, one side with approved shade and balancing with including teak wood beading of 4mm x 18mm size fixed with Fevicol and Panel Pin and applying a coat of high glossy french polish matching to existing surfaces lamination on other side alongwith Telescopic channel all as per drawing and as specified

S&F Side of complete table with 18 mm thick prelaminated particle board rest all as per drawing

M&L for applying one coat of synthetic enamel paint first quality to table computer by using brush complete all as directed by Engineer-in-Charge

M&L for painting with one coat of synthetic enamel paint of contrast colour / Hammertone finish or approved shade as directed both internally & externally through spray gun machine to the following furniture articles including preparation of surfaces as required of MES pattern viz F/FD/DB/MAP series or Similar items including removing of dents, applying putty to level the surface before painting, all as specified and shown on drawings and as directed by Engineer-in-Charge. Note : Work shall be executed where the furniture exist (i.e) at different User Units/Md accns of GE(MIS) Mhow including BSO's Furniture Yard etc.

Almirah Steel Medium/Small/glazed door Drg No: FD-1032

Almirah Steel Large Drg No:FD-67/351, 1031

Book case steel Drg No:FD-1028

Bed Hard JCO/Ors Drg No:MAP

Bed Hard Officers Drg No:MAP

Ladder for loft Drg No:FD-238

Locker Steel Drg No:FD-1029/257

Rack steel Adj 6 tier Drg No:FD-106

Rack shoe steel Drg No:MAP

Table office officer steel Drg No:FD-1003

Teapoy Varandah Drg No:FD-383

Table 3x2 with and w/o drawer Drg No:FD-1007/1008

FMN Set for charpoy Drg No:FD

Shubhi Enterprises

Archana Construction

KHAZAN SINGH SAWHNEY

Choudhary Traders and Engineers

Budget Furniture Industries