Providing and laying distribution line from over head water storage tank at phase-IV RD 0/0 to 3350 in BBT corridor at Tahliwala Distt. Una (HP).

Amount

Excavation in foundations, trenches etc., in earth work, lift upto any level stacking the eacavated soil clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in any lead and lift.

Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. External work Jindal Make including carriage of material with in all lead and lift. a) 80 mm dia (Medium Duty) nominal bore

(b) 65 mm dia nominal bore

Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) including carriage of material with in all lead and lift. a) 80 mm nominal bore

(b) 65 mm nominal bore

Providing & fixing gun metal fire hydrant single landing valve with 80 mm NB flanged inlet, brass spindle controlled 63 mm dia female instantaneous outlet type. G.M. coupling, blank cap, chain, twist release type lug & all accessories Conforming to IS:5290. including carriage of material with in all lead and lift.

Providing and fixing C.I. double acting air valve of approved quality with bolts, nuts, rubber insertions etc. complete (The tail pieces, tapers etc if required will be paid separately) 80 mm dia including carriage of material with in all lead and lift.

Providing and Fixing MS Flanges with nuts bolts 4mm IS Rubber Gasket including welding the flanges with the GI Pipes by using Table 21 complete in all respects including carriage of material with in all lead and lift. a) 80mm dia

(b) 65 mm dia

Making connection of G.I. distribution branch with G.I. main of following sizes by providing and fixing tee, including cutting and threading the pipe etc. complete 50 to 80 mm nominal bore including carriage of material with in all lead and lift.

Constructing chamber 600mm x 600mmx750mm inside size for sluice valve,fire hydrants with C.I. surface box 350mmx 550mm top and 165 mm deep (inside) with changed lid and RCC top slab 1:2:4 mix (1 cement : 2 sand 4 graded stone aggregate 20mm nominal size) 100mm thick foundation concrete 1:5:10 ( 1cement : 5 sand : 10 grades stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement :3 sand) finished with a floating coat of neat cement including curing complete With 200mm thick walls of brick Masonry in cement mortar 1:5 (1cement :5 sand) including carriage of material with in all lead and lift.

KANWAR RAHUL SINGH JASWAL

M/S OM PARKASH DHIMAN AND SONS

Bhisham Kumar

subhash chand