Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹14.9 LAccepted-AOC | L1 | Accepted-AOC L1 BIDDER | |
| 2 | L2₹16.1 L+₹61,559 (3.97%)Rejected-Finance | L2 | Rejected-Finance HIGHER THAN L1 BIDDER | |
| 3 | L3₹19.6 L+₹4.1 L (26.7%)Rejected-Finance | L3 | Rejected-Finance HIGHER THAN L1 BIDDER | |
| 4 | L4₹20.3 L+₹4.8 L (30.8%)Rejected-Finance 107 74 JAWAHAR NAGAR KANPUR NAGAR UTTAR PRADESH 208012 | KANPUR NAGAR | UTTAR PRADESH | 208012 | L4 | Rejected-Finance HIGHER THAN L1 BIDDER |
Tender Value
₹26 L
EMD Value
₹52,000
Closing Date
29 Jul 2022, 6:00 pmClosed
Maj Srinath PL
GE I Kanpur Cariappa Road Cantt Kanpur 208004
REPAIR/MAINTENANCE AND POLISHING OF WOODEN FURNITURE UNDER GE(I) KANPUR
2022_MES_535085_1
GE(I)/KAN/T-39 OF 2022-23
Open Tender
Miscellaneous Works
Item Rate
270 days
KANPUR
AS PER TENDER DOCUMENTS
7 documents required · 7 mandatory
₹500
GE (I) KANPUR
₹52,000
Yes
14 Sept 2022
1 Jul 2022
5 Aug 2022
1 Jul 2022
29 Jul 2022
15 Jul 2022
Amount
Chair Writing FD-202,FD-250,FD-271& FD-280, Taking out existing unserviceable front or rear legs left or right side rails left or right arms, top rails, bottom stiffener as and where required and supply and fixing new components made out of seasoned sheesham wood to the shape and size of original components as specified in drawings directed by the Engr-in-Charge as following:-
Ready made front legs of size 45x45 mm in section at bottom and 25x25 mm in section at on top and 660 mm high as shown on drg and as directed by Engr-In-Charge.
Ready made rear legs of size 65x45x890 mm .
Left member of seat with canning holes of size 65x35x450 mm .
Right member of seat with canning holes of size 65x35x450 mm .
Front member of seat with canning holes of size 65x30x535 mm .
Rear member of seat with canning holes of size 65x30x470 mm .
Ready made bottom stiffner of size 25x25x510 mm.
S&F Top rails of size 50x35x470 mm .
Left or right arms of size 60x25mm at front and 25x25 mm at back and 510mm.
S& F of Nylon Buffers(Shoe) as per size and shape
After repairing, Chair writing shall be French polished with high gloss finish including preparation of surface complete all as specified and as directed by the Engr-in-Charge.
Chair Dinning FD-203, FD-228,FD-270 & FD-279 Taking out existing unserviceable front & rear legs, right or left front side rails, left or right bottom or back stiffner as and where required and S&F new components made of seasoned sheesham wood to shape and size of original components as specified in drawings and directed by the Engr-in-Charge as following:-.
Ready made front legs of size 45x45 mm in section at top and 25x25 mm in section at bottom and 460 mm high .
Ready made rear legs to chair of size 65x45 mm in section at top and 45x45 mm in section at on bottom and 890 mm high .
Ready made front member of seat of size 65x30x440 mm.
Ready made left member of seat of size 65x30x436 mm.
Ready made rear member of seat of size 65x30x405mm .
Ready made right member of seat of size 65x30x436 mm.
Ready made side and front stiffener of size 20x25x360 mm.
Back rest stiffeners of size 45x15x380 mm .
S& F of Nylon Buffers(Shoe) as per size and shape
After repairing,Chair dining shall be French polished with high gloss finish including preparation of surface complete all as specified and as directed by the Engr-in-Charge.
Chair Easy FD-229, FD-17, FD-201 Taking out existing Unserviceable front legs & rear legs, left or right side rails , left or right bottom or back stiffener and arms as and where required and S&F new components made of seasoned sheesham wood of the shape and size of original components as specified in drawing directed by the Engr-In-Charge as folowing:-
Front legs of size 55x25 mm at top and 25x25 mm at bottom x520mm high.
Rear legs 55x25 mm at top and 25x25 mm at bottom x 500 mm high.
Arms right or left side of size 65x45x445 mm.
Front member of seat of size 55x25x510 mm.
Rear member of seat of size 70x40x480 mm
Side member of seat of size 70x40xx575mm.
S& F of Nylon Buffers(Shoe) as per size and shape
After repairing, chair easy shall be French polished with high gloss finish including preparation of surface complete all as specified and as directed by the Engr-in-Charge.M&L for polishing of two coats of French polish to the chair easy including preparation of surface complete all as specified and as directed by the Engr-in-Charge.
Chair Wooden Bottom FD-223, FD-225, FD-285 Taking out existing unserviceable front & rear legs left or right side rails , stiffener and arms as and where required and S&F new components made of seasoned sheesham wood to shape and size of original components as specified in drg directed by the Engineer-In-Charge as following:-
Front legs of size 45x45 mm at top and 25x25 mm at bottom x435 mm high.
Front members of seat of size 65x30mmx415 mm.
Left member of seat of size 30x45x445 mm long.
Right member of seat of size 30x45x445 mm long.
Rear legs of size 65x45x815 mm high.
Side stiffeners of size 20x25x435 mm long.
Center stiffeners of size 20x25x440 mm long.
Top rail of size 50x35x440 mm long.
6 mm thick plywood commercial type BWR grade on seat of chair of size 445x440 mm.
S& F of Nylon Buffers(Shoe) as per size and shape
After repairing, Chair wooden bottom shall be French polished with high gloss finish including preparation of surface complete all as specified and as directed by the Engr-in-Charge.
Chair Dining (FD-203, FD-228,FD-270 & FD-279), Chair writing (FD-202,FD-250,FD-271& FD-280), Chair Easy (FD-229, FD-17, FD-201), Stool Dressing FD-282 & Bin Soiled Linen FD-244,FD-355
M&L for cutting of unserviceable cane and recanning of Chair Dining, Chair easy, Chair writing, stool dressing, Bin soiled linen, etc. with half round polyethylene cane 2.0 mm wide for seat and back and border with 4mm wide cane, finished smooth, glossy and edges free from sharp cut complete all as specified and directed by the Engr-in-Charge.
Bed hard with ply top: FD-213,FD-246: Dismantling of UNSV ply top from Bed Hard with ply top and S&F new ply top of 12mm thick plywood commercial BWR grade of same size and shape complete all as specified and shown in Drg and as directed by Engr-in-Charge, Make : Century/Greenply/Archid
Dismantling of old unserviceable one side teak ply and beading from the head board and S&F new one side teak faced plywood 4mm thick to head Board at both side with 4mm thick teak wood beading shall be provided all round complete all as specified and as shown in Drg and as directed by the Engr-in-Charge.
All as per Srl item No 6.01 here-in-before but foot board of bed ply top.
Removing old unserviceable legs of bed ply top and S&F new legs of size 60x60x 660 mm of seasoned sheesham wood all as specified and as shown in drg and as directed by the Engr-In-Charge.
Removing of old unserviceable long rail and S&F new long rail of seasoned teak wood of size 90 x 35 x 1980 mm and shape as specified and as shown in Drg and as directed, by the Engr-In-Charge.
Removing of old unserviceable short rail and S&F new short rail of seasoned teak wood of size 60 x 60 x 830 mm and shape as specified and as shown in Drg and as directed, by the Engr-In-Charge.
Removing of old unserviceable stiffner and S&F new stiffner of seasoned teak wood of size 60 x 40 x 830 mm and shape as specified and as shown in Drg and as directed, by the Engr-In-Charge.
After repairing, Bed hard shall be French polished with high gloss finish including preparation of surface complete all as specified and as directed by the Engr-in-Charge.
Table Office Clerk FD-381
Taking out unsv Top and S&F of new top of MDF board exterior grade Size 1680 x 870 mm 18mm thick post- formed with 0.6 mm thick laminated in Mohigini/Walnut clour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of make- Rehau/Pegasus/Kynes shall be fixed on two side it complete with storng bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Enginner -in - Charge.
New legs made out of seasoned sheesham wood of size 735x35 x35 mm and shape complete all as specified and shown in drg and as directed by the Engr-in-Charge
New drawer of size 480x145x300 mm made out of 15 mm thick well seasoned sheesham wood and 6mm commercial ply shall be provided at bottom of the drawer as shown in drg and as directed by Engr-In-Charge. Drawer shall be made to move on Telescopic channel make-Ebco/Hettich.
S&F new knobs Chromium plated 32mm dia superior quality as per sample approved.
Short rails of size 1335x25x35 mm made out of seasoned sheesham wood as per drg and as directed by Engr-in-Charge .
Long rails of table of size 1335x35x25 mm made out of seasoned sheesham wood as specified and as shown in drg and as directed by Engr-In-Charge.
Stiffeners of table of size 1335x35x25 mm and shape as per original made out of seasoned sheesham wood as specified and as shown in drg and directed by Engr-In-charge.
After repairing, Table office clk shall be French polished with high gloss finish including preparation of surface complete all as specified and as directed by the Engr-in-Charge.
Table 3' x 2' Without Drawer FD-55,FD-209, FD-231,
Taking out unsv Top and S&F of new top of MDF board exterior grade 18mm thick post- formed with 0.6 mm thick laminated in Mohigini/Walnut clour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of make- Rehau/Pegasus/Kynes shall be fixed on two side it complete with storng bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Enginner -in - Charge.
Unserviceable legs and S&F new legs of sheesham wood of required size & shape.
Unserviceable short rails and S&F new rails of sheesham wood of required size and shape.
Unserviceable long rails and S&F new rails of sheesham wood of required size and shape.
Unserviceable stiffeners and S&F new stiffeners of sheesham wood of required size and shape.
After repairing, Table 3'x2'without drawer shall be French polished with high gloss finish including preparation of surface complete all as specified and as directed by the Engr-in-Charge.
Table 3' x 2' With Drawer FD-224,FD-284
Taking out unsv Top and S&F of new top of MDF board exterior grade 18mm thick post- formed with 0.6 mm thick laminated in Mohigini/Walnut clour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of make- Rehau/Pegasus/Kynes shall be fixed on two side it complete with storng bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Enginner -in - Charge.
Unserviceable legs and S&F new legs of sheesham wood of required size & shape
Unserviceable short rails and S&F new rails of sheesham wood of required size and shape
Unserviceable long rails and S&F new rails of sheesham wood of required size and shape
Unserviceable stiffners and S&F new stiffners of sheesham wood of required size and shape
New drawer of made out of 15 mm thick well seasoned sheesham wood and 6mm commercial ply shall be provided at bottom of the drawer as shown in drg and as directed by Engr-In-Charge. Drawer shall be made to move on Telescopic channel make-Ebco/Hettich.
After repairing, Table 3'x2' with drawer shall be French polished with high gloss finish including preparation of surface complete all as specified and as directed by the Engr-in-Charge.
Table Peg FD-236, FD-266,FD-277,FD 38
Taking out unsv Top and S&F of new top of MDF board exterior grade 18mm thick post- formed with 0.6 mm thick laminated in Mohigini/Walnut clour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of make- Rehau/Pegasus/Kynes shall be fixed on two side it complete with storng bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Enginner -in - Charge.
Unserviceable legs and S&F new legs of sheesham wood of required size & shape
Unserviceable short rails and S&F new rails of sheesham wood of required size and shape
Unserviceable long rails and S&F new rails of sheesham wood of required size and shape
After repairing,Table peg shall be French polished with high gloss finish including preparation of surface complete all as specified and as directed by the Engr-in-Charge.
Table Dinning 06/08 Person FD-273
Taking out unsv Top of Table dining 6 peson and S&F of new top of MDF board exterior grade 18/19mm thick post- formed with 0.6 mm thick laminated in Mohigini/Walnut clour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of make- Rehau/Pegasus/Kynes shall be fixed on two side it complete with storng bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Enginner -in - Charge.
Taking out unsv Top of Table dining 8 peson and S&F of new top of MDF board exterior grade 18/19mm thick post- formed with 0.6 mm thick laminated in Mohigini/Walnut clour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of make- Rehau/Pegasus/Kynes shall be fixed on two side it complete with storng bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Enginner -in - Charge.
Unserviceable legs and S&F new legs of sheesham wood of required size & shape
Unserviceable short rails and S&F new rails of sheesham wood of required size and shape
Unserviceable long rails and S&F new rails of sheesham wood of required size and shape
After repairing, Table dining shall be French polished with high gloss finish including preparation of surface complete all as specified and as directed by the Engr-in-Charge.
Table Centre FD-235,FD-274,FD-267, FD-375
Taking out unsv Top of Table centre and S&F of new top of MDF board exterior grade 18/19mm thick post- formed with 0.6 mm thick laminated in Mohigini/Walnut clour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of make- Rehau/Pegasus/Kynes shall be fixed on two side it complete with storng bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Enginner -in - Charge.
Unserviceable legs and S&F new legs of sheesham wood of required size & shape
Unserviceable short rails and S&F new rails of sheesham wood of required size and shape
Unserviceable long rails and S&F new rails of sheesham wood of required size and shape
After repairing, Table centre shall be French polished with high gloss finish including preparation of surface complete all as specified and as directed by the Engr-in-Charge.
Table Writing FD-249, FD-268, FD-275
Taking out unsv Top of Table writing and S&F of new top of MDF board exterior grade 18/19mm thick post- formed with 0.6 mm thick laminated in Mohigini/Walnut clour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of make- Rehau/Pegasus/Kynes shall be fixed on two side it complete with storng bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Enginner -in - Charge.
Unserviceable legs and S&F new legs of sheesham wood of required size & shape.
Unserviceable short rails and S&F new rails of sheesham wood of required size and shape.
Unserviceable long rails and S&F new rails of sheesham wood of required size and shape.
Unserviceable stiffeners and S&F new stiffeners of sheesham wood of required size and shape.
New drawer of made out of 15 mm thick well seasoned sheesham wood and 6mm commercial ply shall be provided at bottom of the drawer as shown in drg and as directed by Engr-In-Charge. Drawer shall be made to move on Telescopic channel make-Ebco/Hettich.
Taking out unserviceable side cupboard from existing table writing and S&F new cupboard to required size and shape complete all all as specified and as directed by the Engr-In-Charge.
After repairing,Table writing shall be French polished with high gloss finish including preparation of surface complete all as specified and as directed by the Engr-in-Charge.
Table 3'x3' FD-88, FD-291 Taking out unsv Top of Table 3'X3' and S&F of new top of MDF board exterior grade 18/19mm thick post- formed with 0.6 mm thick laminated in Mohigini/Walnut clour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of make- Rehau/Pegasus/Kynes shall be fixed on two side it complete with storng bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Enginner -in - Charge.
Taking out old UNSV legs and S&F new legs of seasoned sheesham wood of size of 55x35x740 mm.
Taking out old UNSV long rails and S&F new rails of seasoned sheesham wood of size 75 x2 5 x 900mm.
Taking out old UNSV stiffiners and S&F new stiffiners of seasoned sheesham wood of size 25x25x900 mm.
After repairing, Table 3'x3 shall be French polished with high gloss finish including preparation of surface complete all as specified and as directed by the Engr-in-Charge.
Book case FD-45 (M),
S&F new legs of seasoned sheesham wood of size 45x45x100mm and shape complete all as specified and shown in drawing and as directed by the Engr-in-Charge.
S&F new long rails of bottom of well seasoned sheesham wood front , or back of size 760x25x40mm , as specified shown in Drg and as directed by Engr-in-Charge.
S&F new back of 6mm thick plywood BWR grade as per drg all as specified shown in Drg and as directed by Engr-in-Charge.
S&F new shelves of veneered teak wood particle board as per drg all as directed by the Engr-In-Charge.
Taking out unsv Top of book case and S&F of new top of MDF board exterior grade 18/19mm thick post- formed with 0.6 mm thick laminated in Mohigini/Walnut clour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of make- Rehau/Pegasus/Kynes shall be fixed on two side it complete with storng bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Enginner -in - Charge.
After repairing, Book case shall be French polished with high gloss finish including preparation of surface complete all as specified and as directed by the Engr-in-Charge.
Side Board Taking out unserviceable top from existing side board and S&F new top made out of 19mm block board with one side teak face and other side commercial fixed with 6mm thick teak wood beading all around the board. Complete all as specified, directed and as per drg.FD-241
Taking out unserviceable left/right sides from existing side board and S&F new sides made out of 19mm thick block board with one side teak face and other side commercial Complete all as specified, directed and as per drg.FD-241, FD-371
Taking out unserviceable back side ply from existing side board and S&F new ply wood 6mm thick one side teak face as required size & shape complete all as specified, directed and as per drg.FD-241, FD-371
Taking out unserviceable front door shutter from existing side board and S&F new door shutter with hinges made out of 19mm thick block board with one side teak face and other side commercial with 6mm thick teak wood beading all around the shutter, locking arrangement, hasp & staples, and two knobs complete all as specified, directed and as per drg.FD-241, FD-371
Taking out unserviceable drawers from existing side board and S&F new drawers made out of 2nd class hard wood 12mm thick for sides & bottom shall be of 6mm thick commercial ply wood with knob complete all as specified, directed and as per drg .FD-241, FD-371.Drawer shall be made to move on Telescopic channel make-Ebco/Hettich.
Taking out unserviceable legs from existing side board and S&F new legs made out of 1st class hard wood (Shisham wood) to be required size & shape. Complete all as specified, directed and as per drg.FD-241, FD-371
After repairing, Side Board shall be French polished with high gloss finish including preparation of surface complete all as specified and as directed by the Engr-in-Charge.
Table bedside FD Taking out unserviceable left side/right side/shelf from existing table bed side and S&F new left side/right side/shelf made out of ply wood 12mm thick one side teak face and other side commercial as required size & shape complete all as specified, directed and as per drg FD-210. FD-248,
Taking out unserviceable back ply from existing table bed side and S&F new back ply wood 6mm thick one side teak face and other side commercial of required size & shape. Complete all as specified, directed and as per drgFD-210. FD-248, FD-276
After repairing, the wooden surface of Table bedside FD one coat of French polish shall be applied for all wooden parts as specified and directed by Engineer-in-Charge.
Teapoy Wooden Taking out unsv Top of Teapoy wooden and S&F of new top of MDF board exterior grade 18/19mm thick post- formed with 0.6 mm thick laminated in Mohigini/Walnut clour/shade as approved by Engineer-in-charge with 2 mm thick PVC edging of make- Rehau/Pegasus/Kynes shall be fixed on two side it complete with storng bonded chemical adhesive through hot pressed machine all as specified on drawing or as directed by Enginner -in - Charge.as per drg. FD-232, FD-278, FD-382
Taking out unserviceable legs from existing teapoy and S&F new legs made out of Ist class hard wood (shisam wood) as required size & shape complete all as specified, directed and as per drg.FD-232, FD-278, FD-382
Taking out unserviceable long rail from existing teapoy and S&F new long rail made out of Ist class hard wood (shisam wood) as required size & shape complete all as specified, directed and as per drg.FD-232, FD-278, FD-382
Taking out unserviceable stiffner from existing teapoy and S&F new stiffner made out of Ist class hard wood (shisam wood) as to be required size & shape complete all as specified, directed and as per drg.FD-232, FD-278, FD-382
After repairing, Teapoy wooden shall be French polished with high gloss finish including preparation of surface complete all as specified and as directed by the Engr-in-Charge.
Stool Dressing CB Taking out unserviceable leg from existing stool dressing CB and S&F new leg made out of Ist class hard wood (shisam wood) as to be required size & shape complete all as specified and directed as per drg FD-252, FD-282, FD-374
Taking out unserviceable long rails from existing stool dressing CB and S&F new long rails made out of Ist class hard wood (shisam wood) as to be required size & shape complete all as specified and directed as per drg.FD-252, FD-282, FD-374
Taking out unserviceable short rails from existing stool dressing CB and S&F new short rails made out of Ist class hard wood (shisam wood) as to be required size & shape complete all as specified and directed as per drg.FD-252, FD-282, FD-374
Taking out unserviceable side stiffeners from existing stool dressing CB and S&F new side stiffeners made out of Ist class hard wood (shisam wood) as to be required size & shape complete all as specified and directed as per drg FD-252, FD-282, FD-374
Taking out unserviceable centre stiffeners from existing stool dressing CB and S&F new centre stiffeners made out of Ist class hard wood (shisam wood) as to be required size & shape complete all as specified and directed as per drg. FD-252, FD-282, FD-374
After repairing, Stool dressing CB shall be French polished with high gloss finish including preparation of surface complete all as specified and as directed by the Engr-in-Charge.
Table dressing Ladies with Mirror FD-251,FD-32 , FD-378 Taking out unserviceable mirror/glass from existing frame of ladies dressing table and S&F new mirror/glass of Make Modi Guard, Atul, Swastik to be required size & shape complete all as specified and directed as per drg.
Taking out unserviceable top from existing ladies dressing table and S&F new top made out of 19mm thick pre-laminated particle board (ISI marked) to be required size & shape complete all as specified and directed as per drg FD-251,FD-32 , FD-378
Taking out unserviceable (left/right) side from existing ladies dressing table and S&F new sides made out of 19mm thick prelaminated particle board (ISI marked) to be required size & shape complete all as specified and directed as per drg. FD-251,FD-32 , FD-378
Taking out unserviceable drawer from existing ladies dressing table and S&F new drawer made out of 12mm thick ply wood at bottom and sides and front side of drawer 19mm thick pre-laminated particle board with knob complete all as specified and directed FD-251,FD-32 , FD-378
Taking out unserviceable glass shutter from existing ladies dressing table and S&F new glass shutter including two way aluminium channel to required size & shape complete all as specified and FD-251,FD-32 , FD-378
After repairing, Table dressing Ladies shall be French polished with high gloss finish including preparation of surface complete all as specified and as directed by the Engr-in-Charge
Sofa set 4/5 pers wooden FD-281,FD-258,FD-373,FD/MAP/06,FD/MAP-II/02 Taking out old unserviceable Foam cushion and S&F new cool foam cushion 32 density of size 580mmx560mmx100mm thick (Make: Sleepwell or equ in make ) duly with cover of tapestry/velvet cloth to be in lose leaf fixing with adhesive strip of superior quality (Rate of tapestry shall not be less than 250/-- per RM as approved by GE & Engr-in-Charge) as specified. Shown in Drg & as directed by Engr-in-Charge.
M&L for Preparing of old wooden surface furniture exsiting at users and applying one coat of french polish complete with following means.Preparing of old wooden surface of Bed Hard/Bed Newar wooden and applying two coat of french polish complete all as specified and directed by Engineer-in-Charge. FD No: FD-214,FD-21,FD-213,FD-246,
All as per Srl item No 22 here-in-before but Side Board FD-241, FD-371
All as per Srl item No 22 here-in-before but Almirah Large wooden 1/2H x1/2 sh DB-4049
All as per Srl item No 22 here-in-before but chair easy.FD-201,FD-229
All as per Srl item No 22 here-in-before but chair dining.FD-279
All as per Srl item No 22 here-in-before but chair Writing.FD-280
All as per Srl item No 22 here-in-before but chair WBFD-223,FD-225,FD-285
All as per Srl item No 22 here-in-before but chair dining MAP
All as per Srl item No 22 here-in-before but sofa set five seater.FD-281
All as per Srl item No 22 here-in-before but sofa set four seater.FD-281
All as per Srl item No 22 here-in-before but stool dressing CB.FD-262
All as per Srl item No 22 here-in-before but table centre.FD-274
All as per Srl item No 22 here-in-before but teapoy.FD-278
All as per Srl item No 22 here-in-before but table bed side.FD-241
All as per Srl item No 22 here-in-before but table writing.FD-268FD-275
All as per Srl item No 22 here-in-before but hat stand with mirror.FD-21,FD-206,FD-233,FD-361
All as per Srl item No 22 here-in-before but table office Clk wooden.
All as per Srl item No 22 here-in-before but table 900x600x760 mm without drawers. FD-284
All as per Srl item No 22 here-in-before but table 900x600x760 mm with drawers. FD-283
All as per Srl item No 22 here-in-before but table 900x900x760 mm with drawers. FD-291
All as per Srl item No 22 here-in-before but table dining 120 x90cm FD/MAP-II/03
All as per Srl item No 22 here-in-before but tableTable dining 6/8 pers FD-273
All as per Srl item No 22 here-in-before but table dressing ladies with mirror. FD-251/378
All as per Srl item No 22 here-in-before but table dressing Gents with mirror. FD-230/379
All as per Srl item No 22 here-in-before but table peg.FD-277
All as per Srl item No 22 here-in-before but Rack side 3/4 spaecFD-97
GUJRAL BUILDERS
S B ENTERPRISES
Star Sofa House
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .