REPAIR TO SEWAGE LINE MANHOLES IN THE AREA OF AGE B/R-II UNDER GE (W) JABALPUR

Amount

Cleaning of septic tank by removing septic tank cover , pumping out fluid, removing, sludge/sediments by mechanical means, transporting the fluid/sludge etc in covered containers by manually or mechanically and burying the same in pits where directed including necessary excavation refill and disposal of surplus soil etc complete, cleaning of septic tank with water placing the covers intact, removing bush/ vegetation near by septic tank to an extent of 3 mtrs around all as directed by engr-in-charge.

Up to 100 User Septic tank Capacity

More than 100 user and up to 400 User septic Tank Capacity

Material and labour for cleaning of all blockage of sewerage of any type sewerage line, branch line main sewer line, etc of any section and that any situation by way of cleaning/desludging by using mechanically or pumping out sewage from block manholes where required and directed by Engineer-in-charge and keeping sewer line functional. Day-to-day complaints of chocked up manholes, sewage lines etc. Cleaning the trap WC, soil waste, vent pipe, gully traps, upto final drop outlet, inlet of septic tank working in foul condition with taking precautionary measures, equipments and required power/cable Pertaining to AGE B/R-ll. Complaints of blockages and cleaning of sewage line are to be received daily from the complaint cell situated in the premises of office of the AGE B/R-Il (W) Jabalpur and entire complaints are to be attended for cleaning on the same day. Minimum number of labourers with specialised experience will not be less than 03 Nos safaiwals from 0830 hrs to 1700 hrs. Note : (i) The payment towards the subject items shall only be made as per the total number of days, contractor had cleaned and cleared the blockages of sewage line. (ii) In case urgent nature of complaints, contractor has to attend the complaints even on Sundays and holidays also (iii) Contractor shall maintain a register including details of day of cleaning of sewage line, duly signed by contractor and Engineer-in-Charge. If the contractor will not able to provide the man power, the recovery of Rs. 629/- per person per day will be deducted and in addition that day will also not be considered for payment. ( For day to day cleaning contractor have to procure mechanically oparated equipments like KAMBORE NM, KAMBORE CC, KAMROD, KAMBORE 1075, KAMBORE ST 300-700, KAMBOBE TM-CNR-GD or equivalant equipment to attend daily complaints no extra cost paid to contractor for procuring equipments)

Cleaning of blockage of Sewage line by manual of any dia pipe or any depth, complete all as specified and directed by Engr-in-Charge.

Cleaning of blockage of Sewage line by mechanical of any dia pipe or any depth, complete all as specified and directed by Engr-in-Charge.

Cleaning of blockage of Manholes of any size/depth, complete all as specified and directed by Engr-in-Charge.

Excavation in trenches not exceeding 1.5m wide and not exceeding 1.5m depth for foundation etc or for shafts, wells cesspits manholes pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5m depth in soft/loose soil etc complete all as specified and directed

Returning, filing in, excavated soil including spreading, levelling, watering and well ramming in layers not exceeding 25cm etc complete all as specified and directed

Removal of excavated materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points etc complete all as specified and directed

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 150 mm internal dia of pipe complete all as specified and directed.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 200 mm internal dia of pipe complete all as specified and directed.

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation filling and mass concrete complete all as specified and directed.

M&L salt Glazed stone ware drain pipe 150 mm bore grade 'A' laid in trenches and jointed and testing complete all as specified & directed.

M&L for laying DWCP 150 mm dia pipes in trenches Class SN-8 conforming to IS 16098 (Part -2) in 6 mtr length with coupler complete all as specified and directed by Engr-in-charge

M&L for laying DWCP 200 mm dia pipes in trenches Class SN-8 conforming to IS 16098 (Part -2) in 6 mtr length with coupler complete all as specified and directed by Engr-in-charge

M&L 450mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L 600mm bore reinforced concrete pipes, class NP2, laid and jointed complete with collars complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 150 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 200 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

M&L for PCC 1:2:4 type B-2 using 40 mm graded stone aggregate as in surface channels and drains complete all as specified and directed.

Demolition of cement concrete reinforced in ground floor and paving n exc 15cm thick (below or above ground level) complete all as specified and directed.

Demolition of brick work or stone/boulder masonry built in cement mortar including all quoins, arches, pillars etc complete all as specified and directed.

M&L Brick work using old size bricks with sub class 'B' bricks in one brick thick honey comb walling built in cement mortar 1:6 complete all as specified and directed.

M&L Brick work with sub class 'B' bricks straight or curved on plan exc 6m mean radius built in CM (1:6) all as specified

All as per above item here-in-before but except brick complete all as specified and directed.

M&L for brick work with fly ash modular bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 complete all as specified and as directed.

M&L Broken bricks of gauge not exceeding 63 mm for loose filling in sokage pit, sokage wells complete all as specified and directed.

Supply only integral water proofing compound all as specified and directed.

Taking down cement plaster any description on brick or stone walls and including wall tiles etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:4 with water proofing compound @2% of weight of cement and to be finished even and smooth with out using extra cement complete all as specified and directed

M&L for rendering on fair faces of brick work or concrete surface of wall 15mm thick in CM 1:6 to be finished even and smooth with out using extra cement complete all as specified and directed

M & L applying three coat of white wash on newly plastered or unplastered wall surface including preparation of surfaces, complete all as specified.

M&L for PCC 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping, benching, bed block, lintel band, plinth courses etc and similar work including necessary form work complete all as specified and directed.

M&L Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using extra cement, including forms, moulds, mitred / stopped ends etc complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 150 mm internal dia of pipe complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (½ round or ¾ section) in cement concrete 1:2:4 type B-1 smooth finished ,and reforming benching as required for 200 mm internal dia of pipe complete all as specified and directed.

M&L for Precast cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate as in landings, cover slab (for manholes etc) and similar work including necessary form work and set in CM 1:6 complete all as specified and directed.

Mild Steel TMT bar 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Mild Steel TMT bar 6 to 8mm dia cut to length bent to shape required including cranking, bending spirally for hoping for columns hooking ends and binding with & including Mild Steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

M&L RCC 1:2:4 type B1 using 20 mm graded aggregate as in slab, shelves etc.all as specified and directed.

M&L RCC type B 1, 1:2:4 (20mm graded agg) as in beams, cantilevers, lintels, over 1.5 m span.

Form work to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200 mm thick (horizontal or sloping) for rough finished flat surface of concrete complete all as specified and directed

Form work to edges of concrete flats, treads breaks in floors, window cills, concrete railings, openings in concrete walls, floor and roof and sides of bands in walls, horizontal or sloping and similar work for rough finished concrete surface exc 10 cm but not exc 20 cm wide complete all as specified and directed.

Taking down of eves gutter,rain water pipes of any size or pattern including all fittings etc complete all as specified and directed.

S&F, PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls complete all as specified and as directed.

S&F, PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints, laid in trenches or in walls

S&F PVC (SWR) bends ISI marked any radius of 110 mm bore with access door complete all as specified and directed.

S & F PVC (SWR) bends any radius, 75 mm bore access door complete all as specified and directed.

PVC (SWR) 110mm bore 'T' equal or unequal complete all as specified and directed.

M&L for preparation of old wall surfaces including brooming down or steel wire brushes, scraping down smoke soot moulds, moss and effeorescent salts and trading oil and greasy spot and applying one coat of white wash complete all as specified and directed.

S&F in repairs galvanised, 2 strand , steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacings and straining and fixing to any type of standard rails staining bolts, incl securing or tying at crossings with and provn of galvanised mild steel wire, staples or steel pins, etc as directed ( each line wire to be measured complete all as specified and directed..

Restraining and resecuring existing galvanised, 2 strand , steel barbed wire 2.24 mm dia barbed with 2mm dia barbs at 75 mm spacings including making good staples etc. fixing to any type of standard rails staining bolts, incl securing or tying at crossings etc all as directed ( each line wire to be measured complete all as specified and directed..

Supply , laying and fixing of galvanized punched tape concertina coil , complete having galvanized spring steel core wire 2.5mm dia cold drawn steel, galvanized punched of low carbon steel having series of sharp barbs uniformly punched along its length 550 nos, barbs on periphery per revolution,crimped on steel spring core wire weight 9.20 kg each coil complete all as specified and directed..

Dismantling/ demolition posts or struts embedded in soil or concrete etc (wood, steel or RCC) any section, including taking out embedded portion and making good disturbed ground complete all as specified and directed..

Dismantling fencing wiremesh, any type complete all as specified and directed..

Dismantling wrought iron or mild steel work of any description complete all as specified and directed..

Excavation in post holes (or similar holes) n exc 0.5 cum getting out in any type of soil returning filling in and ramming earth or broken rubble mixed with earth around in layers n exc 25cm and covering and removal of surplus soil n exc 50m and making good surface complete all as specified and directed..

M&L cement concrete Type B-2 1:2:4 (40mm graded aggregate) as in walls or retaining walls, any thickness, size or shape including pillasters, butresses columns, pillars, boundary pillars and posts (including caps and bases) complete all as specified and directed..

M&L sand filling under floors or in foundation incl watering and consolidation for laying inter-locking tiles complete all as specified and as directed.

M&L machine pressed precast concrete interlocking paver, block with grey cement and pigment any shape and size conforming to IS-15658-2006 of 60mm thick M-40 Grade complete all as specified and as directed.

M&L chequred cement concrete tiles 20cm X 20cm X 25mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors including 15 mm thick screed bed complete all as specified and directed.

S&F posts and struts in fencing including cutting tops to shape as directed, drilling holes, notching for wire, etc; flat iron fillets (for securing wiremesh etc) including all necessary drilling, bolting or riveting, etc including embeding in concrete and similar work conforming to Fe-290 Gde-E-165 complete all as specified and directed.

Supply and fixing of chain link fencing of MS galvanised fencing of diameter of wire 3 mm thick and having aperature size of 75mm x 75 mm to any type of standard rails, straining bolts etc including provision of binding wire all as specified and as directed

S&F mild steel round bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and directed.

S&F 12mm mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, or screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut n exc 5cm long complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces over 10cm in width or girth and applying two coats of syanthetic anamel paint over one coat of red oxide complete all as specified and directed.

Demolition and breaking up drain pipe (salt glazed ware, AC or reinforced concrete ) set in cement mortor for 300 mm internal dia of pipe complete all as specified and directed.

M&L for laying DWCP 300 mm dia pipes in trenches Class SN-8 conforming to IS 16098 (Part -2) in 6 mtr length with coupler complete all as specified and directed by Engr-in-charge

M&L for cement concrete bed to drain pipes including packing under and haunching against the sides of pipe after they are laid & tested for 300 mm bore of pipe with cement concrete 1:4:8 type D-2 using 40mm graded stone aggregate complete all as specified and directed.

S & F in repair,15 mm bore dia steel water tubings medium grade galvanised with and including all medium grade fittings fixed complete to walls and ceilings or laid in floors, including taking down old pipes, complete all as specified and directed by EIC.

S & F in repair,20 mm bore dia steel water tubings medium grade galvanised with and including all medium grade fittings fixed complete to walls and ceilings or laid in floors, including taking down old pipes complete all as specified and directed by EIC.

M&L non skid coloured digital ceramic tiles 300x300/400x400 mm x 6 to 7mm thick,in floors set and jointed in neat cement slurry and pointed in coloured cement to match over and including 15 mm thick screed bed in CM 1:6, complete all as specified.

S&F in repair vitreous china wash basin white flat back size 550x400 mm including, pillar tap, 32 mm dia CP waste coupling and PVC waste pipe 610 mm long and brackets.

S&F in repair vitreous china squatting pan white orissa pattern size 580 x 440mm with integral foot rests (excludig flushing cistern & flush pipe) with cast iron trap and make good to match with the existing surface of floor all as specified and directed by Engr-in-charge.

S&F in repair vitreous china wash down water closet pan including seat cover (pedestal pattern) white excluding flushing cistern & flush pipe including connection to out going pipe and flushing pipe complete all as specified and directed by Engr-in-charge.

S&F in repair 10 Ltr capacity PVC valveless shyphonic action type low level flushing cistern white with inlet, ball valve, float valve and handle incl bracket and flush pipe of low level of 32mm dia fixed to wall complete all as specified and as directed.

Dismantling floor, hearth or wall tiling in-cluding cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and as directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick ( square / rectangular) area of each tile exceeding 0.06 Sqm but not exceeding 0.16 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ( in patches to match the existing colour /shed) over and including screed bed 15mm thick rendering in CM 1:6 complete all as specified and as directed.

S&F in repair 100 mm/ 125mm dia mild steel chromium plated grating fixed on floor trap / nahani trap in Cement mortar 1:6 complete all as specified and as directed.

PVC (SWR) floor trap with grating 75 mm dia incl jointing with solvent cement complete all as specified and as directed.

DEEPAK CONSTRUCTION (BID ID -3110931)

HAFEEZ CONSTRUCTION (BID ID -3111390)

Chetna Enterprises (BID ID -3111198)