Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹13.2 LAccepted-AOC 01 POYEN KARGIL LADAKH 194103 | KARGIL | LADAKH | 194103 | L1 | Accepted-AOC Due to lowest and quoted reasonable rate | |
| 2 | L2₹14.9 L+₹1.7 L (13.1%)Rejected-AOC 12 DORU DOORU VERINAG ROAD NEAR TOWN HALL ANANTHNAG JAMMU KASHMIR 192211 | ANANTNAG | JAMMU AND KASHMIR | 192211 | L2 | Rejected-AOC Higher side quoted amount | |
| 3 | L3₹15.4 L+₹2.2 L (17.1%)Rejected-AOC 361 BEHIND DAV SCHOOL JAWAHAR NAGAR SRINAGAR 190008 | SRINAGAR | JAMMU AND KASHMIR | 190008 | L3 | Rejected-AOC Higher side quoted amount | |
| 4 | L4₹15.9 L+₹2.7 L (20.7%)Rejected-Finance | L4 | Rejected-Finance Higher side quoted amount |
Tender Value
₹15.5 L
EMD Value
₹31,070
Closing Date
16 Jun 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
CWE Khumbathang
HQ CWE Khumbathang
PROVN OF HARD STANDING GROUND AT KSP AREA OF 9 COMP PL UNDER GE KHUMBATHANG
2023_MES_596431_1
80051/08/E8
Open Tender
Miscellaneous Works
Item Rate
180 days
GE Khumbathang
As per tender and NIT doc
8 documents required · 8 mandatory
₹500
Yes
GE Khumbathang
₹31,070
Yes
19 Jul 2023
18 May 2023
17 Jun 2023
18 May 2023
16 Jun 2023
26 May 2023
Amount
Excavation over area not exceeding 1.5 m depth and getting out in hard/ dense soil, complete all as specified and directed by Engr-in-Charge.
Removing excavated material exc 50 m but n.exc 250 m and depositing depositing where directed at a level not exceeding 1.5 m above the starting point, complete all as specified and directed by Engr-in-Charge.
M&L for 100mm thick (compacted thickness ) soling with broken boulders or quarried stone spread and leveled interstice filled, surface formed and rolled with 8 to 12 tone power roller required gradient or camber till satisfaction of Engineer-in-Charge. complete all as specified and directed by Engr-in-Charge.
M&L for PCC 1:3:6 type C-2 using 40 mm graded crushed stone aggregate as in flooring, PCC path, sub base and surface finished even and fair with out using extra cement all as specified and as directed.
M&L for 150 Micron thick transparent HDPE Polythene film of Grade-I, laid over a coat of bitumen primer @ 0.3 to 0.5 Kg/sqm as anti friction layer on the base course of road work as per specification and all as directed by engineer-in-charge.
M&L for 150mm thick air entrained PQC (Pavement quality concrete) work in road/hard standing of minimum flaexural strength 45 Kg/Sqcm (lower control limit) LCL after 28 days of pavement of slab using minimum 400 Kg OPC Grade-43 per Cum with not exceeding 19mm graded crushed stone aggregate confirming to IRC 15, including utilizing of plasticizer @ 0.8% - 1% of weighing of cement content or as per manufacturer instruction, mixed in batching plant transported to site, laid in panels spread and compacted with mechanical table vibrator, finishing the surfaces by belting and brooming without using extra cement etc. including necessary form work complete all as specified and as directed. Note:- (a) Flexural strength shall be established by beam test and design mix formula should be compatible to IRC-44-2017 (b) All types of joints shall be measured and paid separately under respective item of BOQ. (c) Cost of any admixtures required to achive the desired properties of PQC shall be deemend to be included in the unit rate (d) Two coat of surface shield/densified as specified
M&L for forming Contraction joints with mechnically cutter, 30mm deep x 10mm wide , filled with sealing compound, Grade ‘A’ complete all as specified and directed by Engr-in-Charge.
M&L for forming Contraction (Dummy) joints with mechnically cutter, 65mm deep x 10mm wide , filled with sealing compound, Grade ‘A’ complete all as specified and directed by Engr-in-Charge.
M&L for providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required complete. all as specified and directed by Engr-in-Charge.
M/S ALI MOHD AND SONS
KASHMIR FAIR DEAL SERVICES
M/S MOHD HUSSAIN
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .