NIT No. 19, Item No. 01

Amount

PART "B" and "C"

Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCD DB complete with connections, testing and commissioning etc as required. 63 amps

Earthing with G.I. earth plate 600 mm X 600 mm X 6 mm thick including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc with charcoal/ coke and salt as required.

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required.

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required.

Laying of one number PVC insulated and PVC sheathed/ XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. Upto 35sq. mm

Supplying and laying of following size DWC HOPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc. direct in ground (75 em below ground level) including excavation and refilling the trench but excluding sand cushioning and protective covering etc., complete as required. 63mm dia (OD-63 mm & amp; ID-51 mm nominal)

Supply of XLPE insulated PVC sheathed A1. Conductor Armoured Cable 1.1 KV grade conforming to IS-7098 of following size:-2C*6 sqmm

Supply of XLPE insulated PVC sheathed A1. Conductor Armoured Cable 1.1KV grade conforming to IS-7098 of following size:-4C*10 sqmm

SITC of Pillar box size 900 mm x 450 mm x 250mm suitable for mounting incomer of 250 A MCCB/Main switch 4 Pole and energy meter 3 phase complete with eluotropic grade Aluminium bus bar of size 25mm x 19mm mounted on galvanized M.S. body power quoted pilferage proof SMC door duly welded with S.S. with rain cover size 40mm x 40mm x 5m x 600mm height in cutting 300mm height below ground and covered with shode proof SMC sheet of 3mm as required.

Providing and fixing suitable size threaded mild steel cap or spot welded plate to the top of borewell housing/casing pipe, removable as per requirement all complete for borewell of 200 mm dia.

S & F following size of GI union as reqd. 40 mm

S & F following size of GI socket as required, 40 mm dia

S & F following size of GI elbow as required, 40 mm dia

Supply, lowering and fixing following size of GI pipe (M-class) i/c cutting threading on both sides etc ISI marked etc as required (a) 40 mm dia

Supplying and fixing following sizes of insulated steel flexible safety rope for holding submersible pumpset i/c clips etc complete as required. 6 mm

P & F following size of PVC insulated and PVC sheated copper conductor 3 core submersible cable confirming to IS 694/1990 etc as required 3 x 6 SQ MM

Development of tubewell with suitable capacity of air compressor i/c lowering the necessary induction pipe or line i/c cost of fuel, hire charges of compressor etc as required. The development shall be considered complete when Gravel stops sinking. Discharged ceased to improve and sand contents are not more than 10 PPM after 20 minutes of starting the pump complete as required.

Supply, lowering, testing and commissioning of vertical type, multistage, totally enclosed water filled deep well submersible pumping set complete i/c connection etc as required (a) Three phase 5 HP having discharge of 108 LPM approx at 92m head.

Supply, installation, testing and commissioning of cubical type control panel board for single phase and three phase submersible pumping set of following rating complete with contactor, relay MCB, condenser, voltmeter, ammeter and indication lamp etc including connection etc. as reqd. (a) 5.0 HP, Three phase

Supplying and stacking of good earth at site including royalty and carriage upto 5 km lead complete (earth measured in stacks will be reduced by 20% for payment).

Spreading of sludge, dung manure or/ and Good earth in required thickness as per direction of officer in charge (Cost of sludge, dung manure or/ and good earth to be paid separately).

Supply and stacking of Red Bajri

Carriage of Red Bajri

Spreading of Red Bajri

Rough dressing the trenched ground including breaking clods

Fine dressing of the ground

Providing and planting of Golden Bottle brush Topiary well developed with fresh & healthy foliage 5 to 6 big ball 115 to 180 cm ht in 40 cm Cement Pot

Providing and planting of Clerodendrum inerme of ht. 20 cm to 30 cm multi branched in 20 cm size of Earthen Pot / Plastic Pot.

Providing and fixing of precast RCC chair bench with arm rest each bench consists of 2 no. L-shaped base support in grey cement color (thickness 80mmx90mm, 890 mm back height; 450 mm front height with base width 690 mm) and 1 no. reinforced concrete plank in red color of size 1500 mm x 400 mm x 50 mm total height of the bench 890 mm manufactured using cement concrete 1:1.5:3 (1 cement 1.5 coarse sand: 3 stone aggregate 12.5 mm nominal size) using vibro compaction process reinforced suitable to promote long use and to prevent damage during handling. Transportation & erection, all parts are joined together with galvanized nuts and bolts of suitable size and all bolts are sealed after assembly, bench top and back planks are treated with special anti-corrosive water proof coating so as to make surface glossy and water proof and as per direction of Officer-in-Charge. Size: Length 1500 mm, Back Height 890 mm, Base support 690 mm, Front height 450 mm, Seat – 2 Nos. Planks of size 1500 mm x 400 mm x 50 mm and 1 No. Planks of size 1500 mm x 425 mm x 50 mm Total length of support & arm – 2.75m in/c curved portion x-sectional area = 0.08 x 0.09 = 0.0072 sqm. Total length in/c curves Qty of RCC = 2 x 0.0072 x 2.75m = 0.0396 cum

Bidder Name

Amount

M/s S. K. Goel(GSTN-NA)

M/s Virender Singh(GSTN-NA)

M/s Batra Constructions(GSTN-NA)

M/s S. K. Goel

M/s Batra Constructions

M/s Batra Constructions

M/s S. K. Goel