SMART PERIODICALS TO ZONE B UNDER AGE BR I AT INS SHIVAJI LONAVLA

Amount

M&L for complete removal of existing treatment by scrapping with mechnical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint and Washing, rubbing down and stopping of distempered scrapped surfaces of wall with high speed water jet wah etc. by skilled labour complete all as directed by Engineer-in-Charge.

M&L for applying 3 mm thick white cement based wall care putty on plastered surface of internal wall and ceiling smooth finish.etc of approved make & shade on walls and other places complete all as specified and as directed.Note-: Rates are inclusive all scafoldings used for up to the height of 4 storeys complete all as directed by Engineer-in-Charge..

M&L for one coat of acrylic waterbased interior grade primer @ 0.8 ltr(undiluted)/10 sq mtrs diluted with water in 1:1 ratio to be applied with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface for painting of subbsequent coats up to 15M height a all as directed by Engineer-in-Charge.

M&L for applying two coats of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface up to 15M height complete all as specified and directed by Engineer-in- Charge Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

M&L for Preparation of old plastered surfaces of walls,Pillars, cornices etc by brooming down with steel wire brush, scraping down smoke shoot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat of oil bound distemper using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface up to 15M height from ground level incldng removing and refixng wall paintngs boards and panels of any descripton complete all as specified and directed by Engineer-in-Charge Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over old wall surfaces with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint up to 15 height complete all as directed by Engineer-in-Charge.

M&L for Preparation of old plastered surfaces of walls,Pillars, cornices etc by brooming down with steel wire brush, scraping down smoke shoot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying one coat water based premium acrylic smooth exterior emulsion over approved colour with silicon additive & Color stay Technology ,Excellent Dirt Pick up resistance with low VOC less than 50 gram/ litre as per the LEEDS specifications, Anti Algal properties in two coats @ 1.79 ltr (undiluted)/ 10 sqm diluted with water as per manufacturer instructions applied over and including one coat of exterior grade primer with fully automatic airless spray machine of paint application with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI.Allow 6-8 hrs to dry the surface in both the coats of paint up to 15 height complete all as directed by Engineer-in-Charge.

M&L for Preparation of old plastered surfaces of walls,Pillars, cornices etc by brooming down with steel wire brush, scraping down smoke shoot, moulds, moss and efflorescent salts and trading oil and greasy spots and applying two coat of white wash using Airless spray technology with max working pressure of 3300 PSI and capable of operating single spray gun with a max material hose length of 30 mtr the spray machine should be of reputed manufacturer with pro guard technology and capability of tracking pressure and paint usage and certified by paint manufacturer and as mentioned in PS and accessories for applying distemper should be able to spray in hard to reach areas and penetration of distemper on the surface up to 15M height from fgrond level complete all as specified and directed. Note : - Sanding of surface to be done by mechanical sander with 1500 - 2700 rpm, with internal dust extraction system for clean environment certified by paint manufacturer.

All as per Srl Item No 8 here-in-before but on ceiling

All as per Srl Item No 8 here-in-before but one coat of cement base paint

M&L for preparation of old painted wood surfaces of any description having width/ girth execeeding 10cm and apply one coat of synthetic enamel paint complete all as specified & as directed.Note-: Pricing are inclusive all scafoldings used for up to the height of 4 storeys and all as directed by Engineer-in-Charge.

M & L for Preparation of old painted steel surfaces of any description having width/girth exceeding 10cm and apply one coat of synthetic enamel paint complete all as specified and as directed. Note-: Pricing are inclusive all scafoldings used for up to the height of 4 storeys and all as directed by Engineer-in-Charge.

M&L for obilatering old writing of any description, n exc 0.1 sq m, with paint to match existing work complete all as specified and as directed. Note-: Pricing are inclusive all scafoldings used for up to the height of 4 storeys and all as directed by Engineer-in-Charge.

M&L for writing letters or figures (Block, Roman, Italic or Indian) n exc 30 cm high complete all as specified and as directed.Note-: Pricing are inclusive all scafoldings used for up to the height of 4 storeys and all as directed by Engineer-in-Charge.

M&L for writing stops, commas, short lines, dashes, hyphens, brackets, etc complete all as specified and as directed. Note for Sl item No 1 to 15 :- (i) Unit rate quoted shall include for necessary scaffolding, trestles, ladders & cradles required for execution of the work and protective works. (ii) Necessary spreading and removing coverings to doors, windows, floors, fittings etc to protect them from splashes and cleaning of the doors/windows and floors after carrying out painting shall be made by the contractor. (iii) Unit rate quoted shall be deemed to include for necessary shifting of tables, movable cupboards and other articles required for execution and placing in same position after completion of the work. (iv) Unit rate quoted shall also include for removing of nails, making good holes, cracks etc to match with the existing surfaces. Note-: Pricing are inclusive all scafoldings used for up to the height of 4 storeys. Note for Item No 1 to 10 above (a.) The work pertaining to periodical services shall be executed from authorized applicator through manufacturer of which the materials .i.e. Paint, Distemper, Cement base paint, Putty etc. is proposed to be used by the contractor and approved by Garrison Engineer. (b.) The contractor shall upload along with the documents under cover-I, ‘Memorandum of Understanding’ (MOU) with only one manufacturer mentioned in the contract, failing which the bid shall be liable to be rejected.

SAI SAMARTH ENTERPRISES (BID ID -3122936)

cooltech engineering services (BID ID -3131358)

M/s S.D Construction Co (BID ID -3131249)

seema enterprises (BID ID -3131177)

Durga Enterprises (BID ID -3130866)

VIJAYA ENTERPRISES (BID ID -3130423)