ADDN AND ALTN TO CERTAIN OFFICERS MD ACCN FOR PROVISIONING OF MODULAR KITCHENS AND SPECIAL REPAIRS FOR REPLACEMENT OF GEYSERS AND EXHAUST FANS AGAINEST BER AND PROVN OF GAZEBO AT CERTAIN AREA AT INS HAMLA GE(NW) BHANDUP

Amount

Supplying & Installation Poly Fibre Moulded Canopy (Gazebo hexagonal Shape) Double finishing shoot in 4.45 mtr. dia having the following-in(i)06 nos. Ornamental design Poly Fibre moulded pillar Poly Fibre base pedestal with vertical fitted design having pillar to pillar width of size 1900 mm and height 2100mm having 6 nos. of hole with size 20 mm dia. drilled in the base with hold fasteners and having vertical SS pipe, the central SS pipe holds Poly Fibro moulded taj 6 nos. suitably mounted at appropriate height complete as per design. Complete pillar suitably grinded and subsequently spray painted with two coats of P.U. paints in required shades.(Approved by Engineer-in-Chargo.in(ii)11 nos. spandrel and 06 nos. Friezas Floral and omato decorative design combination of spandrel and frieze, matched to be suspended between two SS pillars as per design. The spandrel (L-Bracket) having length 235mm and height 375mm the frieze (top panel) height 105mm and length as per the size of the gazebo. The frieze mounted on SS tubular pipe frame, frieze properly welded to the column pillars at either ends. Complete set of spandrel & frieze uniformly grinded spray primered, spray painted with P.U. paints. (iii) 05 nos. Poly Fibre base panel railing with frame Floral and ornate decorative design Poly Fibre side railing panel as per design having height of 525mm and length as per size of Gazebo. Each panel top and bottom mounted with stainless steel tubular pipe frame. The bottom stainless steel pipe having 2 nos. of hold fasts in SS pipe welded at the base to hold the panel in the ground. Every panel length is as per the gap between the two pillars. The complete railing panel grinded for neat surface finishes spray primered and subsequently spray painted with P.U paint in required shades.In(iv)One set of top frame 21.02 with double finishing Poly Fibre moulded plastic roof Top frame in SS tubular pipe properly welded and grinded. The top frame mounted with Poly fibre moulded sheet of 4mm thick with top & bottom good finishing (Double finishing sheet) to make it rust proof bent to profile in -Z- section on either ends fixed horizontally along the length between column pillars. Also it contains Poly Fibre moulded ball of 500mm dia x 2mm thick at the central top for its beautification. Each such sheet property riveted to horizontal sheets etc. Complete as required.(As per Attached Drawing & approval of GE)(Make Bajaj/Lancer/Poly Fibre World).

M & L for 100 mm thick Plain Cement concrete type B-1,1:2:4 (20mm graded aggregate), complete all as specified and directed.

M & L for hardcore of gauge n. exc 0.63mm deposited, spread and levelled in layers n. exc 15 cm thick watered and rammed to a true surface of broken stone boulder complete all as specified and directed.

M&L for Non Skid ceramic tiles 10mm thick light shade (Square / rectangular) polished, area of each tiles not exceeding 0.18 sqm, in floors over and including provision of cement screed bedding layer 20 mm thick in CM 1 : 4 etc set and jointed in neat cement slurry and pointed in coloured cement to match complete all as specified and directed.

M&L for Roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust etc complete all as specified and directed.

M&L PCC 25mm thick type B0, 1 : 2 : 4 (12.5mm graded aggregate) in sub flooring complete all as specified and directed..

M&L for Cutting chases, pinning in brick wall, making good to facins where required and pointing in cement mortar 1 : 3 to ends of edges of landings, steps, cills, sunshades, shelves, lintels etc and cutting chases for concealed water tubing or concealed conduit wiring etc, making good, cutting exc 10cm girth but n exc 20cm girth complete all as specified and directed.

M&L for Machine cut cudappah stone slab 20-25mm thick over cement screed base, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. (for Kitchen Platform, CB shelf)

M & L for Rounding to edges of stone slabs one edge, such as in steps, cooking platform, and other similar situations complete all as specified and directed

M&L for non-skid coloured joint free ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.11 Sqm but not exceeding 0.18 sqm, in floors etc set and jointed in neat cement slurry over and including provision of bedding layer 15 mm thick in CM 1 : 4 complete all as specified and directed.

M&L for glazed ceramic jointless coloured tiles in vertical surface 350 x 250 x 7mm / 450 x 350 x 7mm set and jointed in neat cement slurry over and including provision of bedding layer 10mm thick in CM 1 : 3 complete all as specified and directed.

M&L for Granite (of any type) work other than white or black 20 mm thick (table rubbed and polished) in cooking platforms, jambs and like over and including provision of 20mm thick cement mortar (1:4) including pointing in colour cement (1 :2) using marble dust with admixture of pigment to match with marble shade complete all as specified and directed. .

M&L for Rendering 15mm thick in (1:6) CM on fair faces of brick work or concrete surfaces of walls and finishing even and smooth without using extra cement complete all as specified and directed.

Labour only for complete removal of existing treatment on walls including washing / rubbing down with water including necessary scaffoldings etc complete all as specified and directed.

M&L for applying 2 coats of white cement based wall care putty on wall of any description finished even and smooth complete all as specified and directed.

M&L for two coats of oil bound distemper on newly putty wall surfaces including necessary scaffoldings etc complete all as specified and directed.

M&L for Preparation of old surfaces of ceiling and application of one coats of white washing complete all as specified and directed.

S&F in repairs stainless steel sink with drainage board made of stainless steel 1mm thick kitchen or labouratory with plugs, washers, and wastes. including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm X 460mm and bowl size 410mm x 330mm x 160mm including necessary fittings such 40mm coupling waste, pipe complete all as specified and directed.

M&L sink Cock brass 15mm bore dia with swinging spout (wall mounted Model) chromium plated fancy type complete in repairs complete all as specified and directed.

M&L stop valves 15mm bore dia, cast copper alloy fancy type, chromium plated with long shank and cup concealed type, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions in repairs complete all as specified and directed.

Taking up or down steel tubing 15mm bore of pipe and connections including cleaning for refixing etc as required complete all as specified and directed..

M&L tubes medium grade galvanised, with all fittings and fixed complete to walls or ceiling or laid in floors 15mm bore dia complete all as specified and directed.

Demoltion of brick work or stone/boulder masonry, built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facing, precast concrete articles complete all as specified and directed.

M&L for brick work with Sub class 'B' bricks straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 complete all as specified and directed.

S& F readymade pulley operated clothes drying system incl of four aluminium pipes of 9 feet long each (4pipes) channel assembly locking system ropes and all fixing material complete all as specified and directed .

Dismantling of boarding ,any description and in any position complete all as specified and directed

Supply, fabricate and fixing with WPC board, one side decorative lamination and other side balancing white,100% termite proof,water proof,fire retardant, 18mm thick heavy density, interior grade cutting , fabricating and suitable fixing for kitchen cabinets and shelves of any size pulling drawers openable leaf complete including fixing only accessories such as Italian stainless steel hinges, handles, Stainless steel baskets, stainless steel rollers, magnets as required etc complete all as specified and directed as under :- (a) Stainless steel Handle fancy type 100mm size. (b) Stainless steel hinge Italian patter suitable for cabinet and shelves opening / closing operation. (c) Stainless steel perforated cutlery basket of suitable for cabinet,drawers and shelves opening / closing operation. (d) Stainless steel steel Cup and Saucer basket suitable size of cabinet,drawers and shelves opening / closing operation. (e) Stainless steel designer basket suitable size of cabinet,drawers and shelves opening / closing operation. (f) Stainless steel designer basket suitable size of cabinet,drawers and shelves opening / closing operation (g) Stainless steel designer basket suitable size of cabinet,drawers and shelves opening / closing operation (h) stainless steel roller of size 25mm x 12mm, 505mm lenth suitable for baskets (j) Magnet of suitable size fixed for cabin leafs, drawers (k) stainless steel vent perforated 1mm thick of size 150mm x 100mm Make-Syntex Plasto board and equivalent approved by Engr in charge. Note- The rate includes WPC board and all connecting items mentioned above and The design and pattern should be approved by Engr In Charge.

Supply, fabricate and fixing with WPC board, one side decorative lamination and other side balancing white,100% termite proof,water proof,fire retardant, 18mm thick heavy density, interior grade cutting , fabricating and suitable fixing for kitchen cabinets and shelves of any size drawers openable leaf complete including fixing only accessories such as Italian stainless steel hinges, handles, magnets as required etc complete all as specified and directed as under :- (a) Stainless steel Handle fancy type 100mm size. (b) Stainless steel hinge Italian patter suitable for cabinet and shelves opening / closing operation. (j) Magnet of suitable size fixed for cabin leafs, drawers Make-Syntex Plasto board and equivalent approved by Engr in charge. Note- The rate includes WPC board and all connecting items mentioned above and The design and pattern should be approved by GE.

M & L for point wiring complete with proper colour coding using 1100 volts grade, 1.5 Sqmm, PVC insulated, FRLS,unsheathed wire with multi stranded copper conductor confirming to IS-694, Part II, ISI marked, drawn partly in and including PVC conduit concealed in walls etc including cutting chases and making good the same in CM 1:3 to match with existing surfaces and partly drawn in and including PVC casing caping fixed on the surfaces of RCC slab/ ceiling/columns/beams etc with all accessories, fittings, PVC junction boxes etc, also inclduifng 1.5 Sqmm, PVC insulated, FRLS, unsheathed, 1100 Volts mutli-stranded copper conductor green colour as continous earth wire connected to common earth dolly all as specified and diretced for one light/ fan point controlled by one way switch complete all as specified and directed.

All as per item No.29 above but for one 5 pin socket outlet 05 amp independent board complete all as specified and directed

All as per item No.29 above but for one Independent Power Socket pont 5 pin 15/5Amps rated with 3 run 2.5 Sqmm, PVC Copper FRLS Cable complete all as specified and directed

All as per item No.29 above but for one 5 pin socket 5 Amps on same board complete all as specified and directed.

Supply and Fitting Curved glass wall mounted type stainless steel T-Shapped Kitchen Chimney with baffle filter of air Suction Capacity 1200 Cum/Hr thermal Auto clean operated with single phase 230 V,50Hz A.C Supply Complete all as specified and directed by the Engineer-in-charge.Make : Hindware Nevio 90 or any equivalent Specification of Crompton/kaff as aprroved by the G.E.The specifications required for the above chimney following below are. (i) Chimney width : 90Cm (ii) Air Suction cxapacity : 1100-1200 cum/hr. (iii) Body type : Stainless stee/black painted Glossy finish. (iv) Control : Soft push button. (v) Smoke Exhaust pipe upto kitchen window Length required not less than 02 Mtrs. Note : product warrenty shall be minimum 01 Year and Motor warrenty shall be 05 Year.

Supply & fixing ceiling rose , surface bakelite 3 terminal complete all as specified and directed.

Supply & fixing switch modular type 6 Amp single pole one way 230V complete all as specified and directed.

Supply & fixing switch modular type 16 Amp single pole one way 230V complete all as specified and directed.

Supply & fixing socket modular type 6 Amp 2/3 pin single pole one way 230 V complete all as specified and directed.

Supply & fixing socket modular type 16 Amp 2/3 pin single pole one way 230 V complete all as specified and directed.

Supply & fixing Modular white cover plate with frame 3 Module complete all as specified and directed.

Supply & fixing modular Metal Flush box 3 Module complete all as specified and directed.

Excavation in trenches n.exc 1.5 m wide and n. exc 1.5 m in depth and getting out in Hard/Dense soil for removing/laying of cables complete all as specified and as directed.

Returning, filling in including spreading , leveling , watering and well ramming in layers n.exc 25 cm in any type soil complete all as specified and as directed.

Removing excavated material to a distance n.exc 50 m and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed.

Supply and laying HDPE pipes of pressure rating 6 Kg/Cm sq of size 32 mm laid in trenches complete all as specified and directed.

Suppl,Laying,Testing & commissioning of LT XLPE insulated,Screened,PVC bedded galvanised steel strip or wire armoured,electric power cables with aluminium Multi stranded conductor,1100 volts,grade cross sectional area 4C x 16 sqmm confirming to IS : 7098(part-I) -1988 and complete all as specified and directed.(From nearby Source Power Panel)

Suppl,Laying,Testing & commissioning of LT XLPE insulated,Screened,PVC bedded galvanised steel strip or wire armoured,electric power cables with aluminium Multi stranded conductor,1100 volts,grade cross sectional area 2C x 10 sqmm confirming to IS : 7098(part-I) -1988 and complete all as specified and directed(for Each gazebo Mains)

Supply and fixing in replacement pole/wall mounting box water proof FRP type of size 240mm x 130mm x 110 mm, 63 Amps 4 way Connector Bolt with locking arrangements, including necessary nut, bolt and clamps of the flat iron of size 20mm x 3 mm comprising of MCB SP 6 Amps, 240 Volts, 10 KA, 'B' series with proper fixing arrangements on pole complete all as specified and directed.

Supply & fixing modular fan regulator,120W- 1 module complete all as specified and directed.

Supply & fixing Modular white cover plate with frame 12 Module complete all as specified and directed.

Supply & fixing modular Metal Flush box 12 Module complete all as specified and directed.

Supply and fixing integrated sleek extruded LED channel with acrylic cover 20 watt with white light including with driver and prewired complete including 0.5 sqmm 3 core flexible wire connecting from ceiling rose complete all as specified and difected.

Supply and fixing Indoor Hanging LED E27 Lamp Holder including LED lamp 14 watt thread type warm white light including with driver and prewired connecting from ceiling rose complete all as specified and difected.

Material and labour for earthing complete with GI earth plate electrode 600x600x6 mm thick burried directly in ground (earth pit not less than 2.25 mtr deep below ground lavel) with top edge of the plate not less than 1.5mtr below normal ground lavel connected to GI earth strip 25X4 mm by mean of bolts, nuts, check nuts and washer of brash all as shown in electrical plate No 5 connected to earthing test point all as specified or indicated including PCC pit and CI cover fullel with watering pipe, wire mess and copper lugs etc GI protection pipe 40 mm dia medium grade including testing on completion all as specified and directed.

Deduct Credit for Demolished/ Dismantled material Rs. (-) 8180.00 (Minus) as listed in Schedule of Credit Note1: Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum' Note 2:- The tenderer must keep in mind when quoting rates against items out in multiple store house having height 4 mts to 7 mts. Necessary scaffolding and saftey measures required during execution of work are including in this items.

M/s Mukesh Engineers

M/S Kumar Enterprises