Special Repair of Canteen equipment, furniture and granite work at Haryana Bhawan, New Delhi. (RECALL)

Amount

[10.50.1]Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 1. Polished Granite stone slab jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

[10.51]Providing and fixing granite stone in all shades 15mm to 18 mm thick in skirting /dado, risers of steps, pillars and wall facing, laid in any pattern as specified over base of 12mm thick cement coarse sand mortar 1:3 and jointed with white cement slurry mixed with pigment to match the shade of Granite including labour for fixing cramps pins and dowels etc.

[10.62]Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

[12.157.1.2]Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 1.2. For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron)

[12.157.2.2]Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, panelling and dash fasteners to be paid for separately) : 2.2. For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron)

[12.158.2]Providing and fixing 12 mm thick prelaminated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminium doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as per architectural drawings and directions of engineer-in-charge. 2. Pre-laminated particle board with decorative lamination on both sides

[12.159.2]Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 2. With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm)

[5.43.1]Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 1. For thickness of tiles 10 mm to 25 mm

[5.44]Dismantling stone slab flooring laid in cement mortar including stacking of serviceable material and disposal of unserviceable material within 50 metres lead.

1 No. Single Sink for used plates (Size 2000 x 480 x 850 plus 150 mm), 1 no. Three Sink unit (Size 1800 x 600 x 850 plus 150mm), 2 Nos. Storage racks (Size 900 x 450 x 1820 mm), 1 No. Gravy machine 3 H.P., 1 No. Working Table with Two under Shelves (Size 750 x 600 x 850 plus 150mm), 1 No. Two Burner Range (Size 1200 x 600 x 850 plus 150 mm), 1 No Working Table with Two under Shelves (Size 1200 x 600 x 850 plus 150mm), 2 No. Four Burner Range (Size 900 x 900 x 850mm), 1 No Working Table with Two under Shelves (Size 850 x 600 x 850mm), 1 No Dosa Range (Size 900 x 600 x 850mm), 1 No Single Burner Range (Size 600 x 600 x 850mm), 1 No Double Sink Unit (Size 1100 x 600 x 850 plus 150mm), 2 No Pick up Table with overhead Shelves and Under Shelves (Size 700 x 850 plus 600mm), 4 No Pick up Table with overhead Shelves and with Drawers (Size 1500 x 700 x 850 plus 600mm), 2 No Bain Marie with Overhead Shelves (Size 1500 x 700 x 850 plus 600mm), 1 No Preparation table with drawers (Size 1500 x 600 x 850mm), 2 No Sink with Table with Backsplash (Size 1500 x 600 x 850 plus 600mm), 1 No Under Counter Refrigeration (Size 1500 x 700 x 850 plus 600mm), 1 No Sandwich Griller (Jumbo), 1 No Table Top Deep Fat Fryer (8 Ltr.), 1 No Two Small Burner with Table for pantry (Size 1200 x 600 x 850 plus 150mm), 1 No Working Table with Two Under Shelves (Size 1300 x 600 x 850 plus 150mm), 1 No S.S. Hoods With Baffle Filter (Without Ducting, Installation and fan) for two Burner Range (Size 1500 x 750 x 450mm), 2 No S.S. Hoods with Baffle Filter (Without Ducting, Installation and fan) for Four Burner Range (Size 1200 x 1200 x 450mm), 1 No S.S. Hoods with Baffle filter (Without Ducting, Installation and Fan) for Dosa Range and Single Burner (Size 1800 x 750 x 450mm), 1 No S.S. Hoods with Baffle Filter (Without Ducting, Installation and Fan) for Two Burner Pantry (Size 1200 x 750 x 450mm), 2 No S.S. Hoods with Baffle Filters (Without Ducting, Installation and Fans) for Tandoors (Size 1200 x 1200 x 450mm), 1920 sft G.I. Ducting for Hoods (Area Calculated), 5 No Crompton Fans for the exhaust system (Crompton), 7 No Grills for fresh air ducting (Standard), 1 Fresh Air Cooler System with Crompton fan, Cooler will be build in 18 Guage G.I. Sheet. (G.I. Made), 1 Stone Base Electric Pizza Oven (Standard), 6 No Storage racks (Size 900 x 450 x 1800mm), 3 Wall Mounted Cabinets (Size 1500 x 600 x 600mm), 2 Wall Mounted Cabinets (Size 1200 x 600 x 600mm), 1 Wall Mounted Cabinets (Size 1500 x 600 x 600mm).

12 Nos Wooden Dining Table 3.5 x 3.5 Teak frame as per approved sample melamine polish, 48 Nos Wooden Dining chair as per approved sample and design melamine polish

M/S CHAUHAN INFRA (BID ID -1134977)