Repairs to path, hard standing, fencing and security wall at COD, AFMSD Kandivali and Malad complex under GE North Mumbai

Amount

Demolition of brickwork/stone/PCC block masonry built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles and removing of debris outside MD land complete all as specified and as directed by Engineer-in-Charge

Demolition of reinforced cement concrete of any description in any position including necessary scaffolding arrangement (reinforcement cut as required to facitate demolition) and removing concrete debris and depositing outside MD land all as specified and as directed by Engineer-in-Charge. Note : Concrete and reinforcement obtained from this item shall be handed over to contractor on account of sch of credit.

Excavation in trenches, not exceeding 1.50 m wide and not exceeding 1.5 m in depth, for foundation, cable trenches etc, not exceeding 10 sq m on plan and getting out soft/loose soil complete all as specified and as directed by Engineer-in-Charge.

Material and labour for hardcore of gauge not exceeding 63mm, deposited, spread and levelled in layers not exceeding 15cm thick, watered and rammed to a true surface all as specified and as directed.

Material and labour for plain cement concrete 1:4:8, type D2, using 40mm graded stone aggregate as in foundation / mass concrete etc complete all as specified and as directed by Engineer-in-Charge.

Supply and fix mild steel TMT bars, 10mm dia and over cut to length bent to shape required including cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

Supply and fix mild steel TMT bars, 5mm dia & over upto 10mm dia in stirrups, spacers and binder cut to length bent to shape required inch cranking, bending spirally for hooping for columns hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed by Engineer-in-Charge.

Formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surface of concrete complete all as specified and as directed by Engineer-in-Charge.

Formwork to sides of square/rectangular pillars, posts, struts, piers, columns and stanchions for rough finish surface of concrete complete all as specified and as directed by Engineer-in-Charge.

Material and labour for reinforced cement concrete M-30 (design mix) (using 20mm graded stone aggregate) as in foundation, footing, bases of columns, raft and raft beams, plinth beams, mass concrete and similar work etc complete all as specified and as directed by Engineer-in-Charge. Note: Formwork and reinforcement shall be measured and paid separately

Material and labour for Reinforced cement concrete M-30 (design mix) (using 20mm graded stone aggregate) as in beam, columns, pillars, piers, posts and struts etc complete all as specified and as directed by Engineer-in-Charge. Note: Formwork and reinforcement shall be measured and paid separately

Material and labour for brick work built in cement mortar 1:6 using sub class 'B' bricks, straight or curved on plan, exceeding 6 mtrs mean radius complete all as specified and as directed.

Material and labour Plain cement concrete 1:2:4 type B-2 (using 40mm graded crushed stone aggregate) as in benching of manhole, surface channels, drains etc including use and waste of formwork for fair finished surfaces & finished even and smooth without using extra cement etc complete all as specified and as directed by the Engineer-in-charge.

Material and labour for rendering 15mm thick plaster in Cement Mortar 1:4 on brick or concrete surfaces, finished the surface even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for rendering 10mm thick plaster in Cement Mortar 1:4 on brick or concrete or block masonry surfaces, finished the surface even and smooth without using extra cement etc complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparing new plastered surfaces & applying two coats of cement based paint over a coat of cement primer complete all as specified and as directed by Engineer-in-Charge. Make : Snowcem/Duracem/Aquacem/Berger/Shalimar

Material and labour for cement concrete nominal mix 1:2:4 (using 20mm graded stone aggregate) type B-1 as in copings etc including use and waste of formwork for fair finished surfaces & finished even and smooth without using extra cement etc complete all as specified and as directed by the Engineer-in-charge.

Material and labour for broken glass coping on top of wall in cement mortar (1:3), 25mm thick rendering with rounded or weathered finish and before mortar has set, glass (of bottle or thick glass) broken to approximate 63 mm gauge firmly embedded @ 10 Kg glass per sqm of rendered surface complete as specified in SSR Part-I.

Returning, filling in including spreading, levelling, watering and well ramming in layer not exceeding 25cm in soil complete all as specified and as directed by Engineer-in-Charge.

Removing excavated material to a distance not exceeding 50 m and depositing where directed at a level not exceeding 1.5 mtr above the starting point complete all as specified and as directed by Engineer-in-Charge

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer-in-Charge.

Supply and fix framed brackets for swan neck frame on top of boundary or any other uses of angle or tees with web flanges cut to a shape,drilled and counter sunk for screw,incl bending and welding angle asnecessary plates,riveting etc, confirming to Fe-290 Grade E-165 complete including all as specified and directed by Engineer in charge.

Supply and fix in repairs galvanized 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails, straining bolts, including securing or tying at crossing with and provn of galvanized mild steel wire staples or steel pins etc as directed (each line of wire to be measured), complete all as specified and as directed by Engineer-in-Charge.

Restraining & resecuring of existing galvanized 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacings including making good complete (each line of wire to be measured) all as specified and as directed by Engineer-in-Charge.

Supply and fix razor type concertina coil, SG hot galvanized spring tensile wire, 145 to 150 newton per sqmm, zinc coating 250-300 gm per sqm, dia of coil when unstreched 600mm, minimum No of coils 10 per running meter after laying, hot dipped razor ribbon tape of size 0.50 mm thick, 19mm wide before wrapping on central core wire, fixed with 1.66 mm thick GI clips 25 Nos, per running metre and special nut bolts for holding 'Z' coils together and extra two rows parallel wire of 10 gauge complete all as specified and as directed by Engineer-in-Charge Note :- The length shall be measured along the centre-line of the perimeter of fencing.

Supply and fix 10mm dia MS round bars, cut to length, bent to shape for stifners etc and similar work complete all as specified and as directed by Engineer-in-Charge.

Supply and fix flat iron including fixing clamps or support to chain link fencing, wind ties and fixed to post with all fittings as directed by Engineer - in- Charge.

Supply and fix Mild steel screw bolts (machine made) with hexagonal or square heads at one end and screwed the other, screwed both ends, each screwed end to be fitted with washers and one hexagonal or square nut, exceeding 5cm & not exceeding 10cm long, dai of sank 16mm all as specified and directed by Engineer-in-Charge..

Supply and fix in repairs Chain link fencing of size 50x50mm mesh size made of 10 gauge GI wire, streched and fixed to fencing post all as specified and directed by Engineer-in-Charge.

Material and labour for MS framed work such as grills , gratings, etc with ends of bars shouldered and /or riveted or forged into spikes, framed guard bars, framed work of garbage bin, barred iron doors, ladders, framed balusters, walk ways, railings, framework of watertanks and similar work conforming to FE 290 Gde 165 etc. complete all as specified and as directed by Engineer-in-Charge.

Material and labour for preparing of new painted steel surfaces of any description, exceeding 10 cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed by the Engineer- in - Charge. Make : Jenson & Nicholson-Broach / Asian Paints Ltd - Apcolite / Berger Paints Ltd - Luxol / Shalimar Paints - Superlac

Demolition of cement concrete in ground floors and pavings, exceeding 15cm thickness (below or above ground level) and removal of debris outside MD land including site clearance complete all as specified and as directed by Engineer-in-Charge

Material and labour for 75mm thick plain cement concrete 1:4:8 type D2, using 40mm graded stone aggregate as in sub base for flooring finished even and fair complete all as specified and as directed by Engineer-in-Charge.

Material and labour for sand cushioning / filling under floors or in foundations including watering and consolidation, 25mm average thickness complete all as specified and as directed by Engineer-in-Charge

Material and labour for machine pressed precast concrete interlocking paver block of any shape and size conforming to IS 15658-2006 of 60mm thickness, M-35 grade with grey cement and pigment including dismantling existing paver blocks complete all as specified and as directed by Engineer-in-Charge. Make: Mehtab Tiles/Indore/M/S Ultra Tiles/NITCO/Topaz Tiles/Navya Tiles Jodhpur

Material and labour for factory made precast cement concrete, 1:2:4 type B1, using 20mm graded stone aggregate as in kerb stone of size 300mm x 400mm x 100mm or any other size in required shape, smooth finished, set in cement mortar 1:4, smooth finshed including excavation & earthwork in any type of soil complete all as specified and as directed by Engineer-in-Charge

Material and labour for 150mm thick Plain Cement Concrete 1:2:4 type B2, using 40mm graded stone aggregate as in flooring/ hard standing, finished even and fair and brooming complete all as specified and as directed by Engineer-in-Charge.

Material and labour for forming contraction (Dummy) joints 30mm deep x 10mm wide, filled with sealing compound Gde ‘A’,complete all as specified and as directed by Engr-in-Charge.

Material and labour for forming 12mm thick expansion joints filled with pre-formed bituminous filler and top 30mm primed and sealed with sealing compound, Grade ‘A’ for slab thickness of concrete slab 150mm complete all as specified and as directed by Engineer-in-Charge.

Material and labour for chequered cement concrete tiles 20cm x 20cm x 25mm thick with grey cement and no pigments, machine pressed, set, jointed and pointed in neat cement slurry in floors including 15mm thick screed bed in cement mortar 1:6 including dismantling existing tiles complete all as specified and as directed by Engineer-in-Charge complete all as specified and as directed by Engineer-in-Charge. Make: Mehtab Tiles/Indore/M/S Ultra Tiles/NITCO/Topaz Tiles/Navya Tiles Jodhpur/Swami Tiles/Renuka Tiles/Patel Furniture mart/SAP Paver Jodhpur/Sagar Tiles Saharanpur

Note: Deduct Credit for demolished / dismantled material of Rs. (-) 63,155.00 (Minus) as listed in Schedule of Credit. Tenderers will not quote against this item being a tentative amount to be considered to arrive at the 'Contract Sum'

Parmatma Enterprises

SHANTI CONSTRUCTION