SPECIAL REPAIR TO ROAD AT NAMS IN JAK, PUNJAB AREA, JADUNATH AND PALERAM ENCLAVE UNDER GE NAMS

Amount

M&L for scarifying or picking gravelled, macadam or bituminous macadam surface in area not exc 400 sqm in plan & exceeding 50mm deep but not exceeding 100mm deep including removing the unserviceable material upto a distance not exc 200m and stacking complete all as specified and directed.

M & L for 75 mm thick (compacted thickness) water bound macadam with course aggregate of grading-2 (63 to 40mm) blinded with screening type-A spread and rolled with 8 to 10 tone power road roller to required gradient and camber complete alll as specified.

M&L for Repair to pot holes, depth of pot hole exc 30mm, area of pot hole n.exc 1 sqm each incl sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc cutting around edges to at least 30 mm in depth making good the surface by applying tack coat with paving bitumen (VG-10) @ 10 kg/10 Sqm ,putting in premixed bituminous macadam using binder (Bitumen VG-30) @ 4% by weight of road metal, well rammed and sealed with binder @ 9.8 Kg per 10 Sqm, blinded with 0.09 cum of stone chipping 6.3mm size and again well rammed (incl supply of premix macadam, binders and chippings) to uniform surfaces complete all as specified as directed.

M&L preparing of WBM surfaces by brushing with wire brushes for removing caked ,mud etc. sweeping with brooms and finally fanning the cleaned surfaces with air compresser to remove all loose dirt and applying evenly a priming tack coat with paving bitumen primer @ 10kg/10 sqm using paving bitumen VG 10 and laying semi dence Asphaltic bituminious concrete ( SDAC ) 40mm consolidated thickness with 5.5% binder content VG 30 by weight of total mix with mechanical paver mixing in hot mix plant , rolled and consolidated to required camber and gradient with 8 to 10 tonne mechanical power roller complete all as specified and directed. Note : (a) Mix Design of bituminous SDAC will be got done from approved lab and aprooved by GE before execution.

M&L preparing of black top surfaces by brushing with wire brushes for removing caked ,mud etc. sweeping with brooms and finally fanning the cleaned surfaces with air compresser to remove all loose dirt and applying evenly a priming tack coat with paving bitumen primer @ 5 kg/10 sqm using paving bitumen VG 10 and laying semi dence Asphaltic bituminious concrete ( SDAC ) 30mm consolidated thickness with 5.5% binder content VG 30 by weight of total mix with mechanical paver mixing in hot mix plant , rolled and consolidated to required camber and gradient with 8 to 10 tonne mechanical power roller complete all as specified and directed. Note : (a) Mix Design of bituminous SDAC will be got done from approved lab.

M&L for making lines on road pavements and the like of any width with using themoplastic white paint hot applied 2mm thick incl glass with machine confirming to BS 3262 and according to the specification laid down IRC & MOST (ministry of surface transport) complete all as specified and directed by Engr-in-Charge. Note:- Marking shall be carried out with thermostat machine

S&F in replacement of CAT EYE / Road stud, two way refelective of dimension 110x128x 30mm with minimum weight of 530 gms aluminium alloy body, relfective panel of Colour : Amber , Red or White complete all as specified and directed. Make : Model No DA-971 of DARK EYE or equivalent model of makes mentioned in Appx B.

Supply and fixing in replacement of rubber speed breaker/ speed bump made by rubber compression moulding, compact and high resistance capacity to with stand severe impacts. The precoloured UV stabilised material,colours in black and yellow combination with two reflectors( 70mmx23mm) fixed on both side of bump. The size of the speed bump is 500x365x50mm with six holes. The whole breaker fixed along with epoxy and hardner and bolts supply with epoxy and harder as required, complete all as specified and directed. Make ;- Model No DA-1009 of Dark eye or equivalent model of makes mentioned in Appx B.

Chander Mohan Arora Contractor

TARSAM LAL SAINI CONTRACTOR

Santokh Singh and Associates