Essential Repair of B/R nature of work such as periodical, replacement of sanitary fittings, false ceiling wall paneling flooring repair of OTM Accn in 629 TPT, AFMSD, HQ TG EME, HQ CWE No 2 and BSO Yard in the area of AGE B/R-III under GE (West) Del

Amount

Notes :- (i) Complaint cell shall be run in location Basantar Line. The Tradesman Will take the complaint from complaint cell for rectification. (ii) complaints are of day to day nature and complete site cannot be forecasted or complete site cannot be handed over to contractor at once. The contractor shall provide manpower and material as per requirement, in case the contractor is not able to produce skilled labour as per the contract charges will be levied upon. (iii) Contractor or his rep will report daily at complaint cell, in case after checking & attending the defects, if it is not possible to rectify the defects within 08 hrs, the facts shall be brought to the notice of JE’s in charge by the contractor/ his rep immediately. If Engr in charge is satisfied with contractor's view, no recovery will be made on this account. However such complaints shall be attended on very next day whether it is 'Sunday' or 'Gazetted Holidays' and nothing extra shall be payable to contractor on this account. (iv) To keep the record of work done against Item No 2 to 5 of the BoQ, the contractor shall maintain complaint slips and register for reference of measurements. (v) The above all aspect shall be deemed to be included in the quoted rate of the respective item. (vi) For non rectification of defects on same day, recovery of 120 Rs per complaint shall be recovered from contractor.

Inspection and rectify the problem of under ground sewage of all nature i.e. blockage of WHB, bottle trap, urinal, sink, floor trap Nahani traps, WC gully trap, vertical CI pipe/PVC pipes of any dia including junction holes of any description ,sewer/rain water line, manholes in any situation of building for cleaning manually using bamboo or other eqpt / mechanically as per requirement at site and removing blockage from entire system and making it fully functional in the area of OTM HQ TGME,Old base hosp,AFTC,629 TPT coy HQ CWE NO. 2, BSO yard WEST & AFMSD. complete all as specified and directed. Note:- (i) Contractor shall arrange suitable mechanical equipments incl necessary form work/scaffolding and safety measure complete all as specified and directed. (ii) In addition to above, Contractor shall arrange mechanical rodding with vibrating/ drilling concept i.e trolley mounted sewer cleaning machine once in every month for cleaning entire sewage system and free of any sludge/ blockage. (iii)The above aspect shall be deemed to be included in the quoted rate of this item.

Inspection and rectify the problems of water leakage from taps, WCs, flushing cistern, urinals, wash basins, bottle traps CI trap from ceiling etc and any obstruction to water supply requiring plumbing work and carry out minor repairs such like replacement of washers, check nuts, tightening of fittings, adjustment of float valves and syphon fittings of flushing cistern, cleaning of bottle traps etcn the area of OTM HQ TGME,Old base hosp,AFTC,629 TPT coy HQ CWE NO. 2, BSO yard WEST & AFMSD. complete all as specified and directed. Note:- In addition of above Contractor shall arrange suitable T&P such as die set (1/2" to 1") washers of all size, safeda, thread (soot), M-seal, screws, nails and the like incl necessary form work and scaffolding and safety measures to make it functional and leak proof complete all as specified and directed. The above aspect shall be deemed to be included in the quoted rate of this item.

Inspection and rectifying of carpentary work (wooden/steel/aluminium) iron/aluminium mongery, palmet box, door springs, rolling shutters, venetion blinds etc requiring carpentry work and carrying out minor repairs such like tighting of screws/nails easening of joinery door spring etc in the area of OTM HQ TGME,Old base hosp,AFTC,629 TPT coy HQ CWE NO. 2, BSO yard WEST & AFMSD. complete all as specified and directed. Note:- In addition above Contractor shall arrange suitable T&P such as (screws/nails, plugs, grease,putty welding rods & portable welding machine drill machine & bid) etc including necessary form work/scaffolding and safety measure to make it functiona lncl all as specified and directed. The above aspect shall be deemed to be included in the quoted rate of this item.

Inspection and rectifying of black smith work to welding work in repairs to steel windows/doors, handles, door springs, iron frame of doors, rolling shutter and other iron misc works ,repair by welding run or spot welding complete as per site requirement in the area of OTM HQ TGME,Old base hosp,AFTC,629 TPT coy HQ CWE NO. 2, BSO yard WEST & AFMSD. complete all as specified and directed. Note:- (i) Contractor will arrange suitable T&P such as RIKSHAW, welding machine, gloves, welding glass,welding rod etc and any other tools required incl necessary scaffolding and safety measures complete all as specified and directed. (ii) The above aspect shall be deemed to be included in the quoted rate of this item.

Hacking out old broken glass any thickness, size quality or description from wooden/steel frame fixed with wooden beads/metal pinning complete all as specified and directed

S&F 4 mm thick plain sheet glass in square not exc. 0.50 sqm in each pane, fixed with pin headed beads or putty (in metal frames etc) complete all as specified and directed.

S&F 4 mm thick plane sheet glass and glazing with oil putty in square exc 0.5 sq. m in each pane complete all as specified and directed.

S&F in repair stainless steel wire cloth with stainless steel 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with wire staples (for windows and gauzed doors) all as specified and directed.

S&F in repairs aluminium anodized extruded bow handle fabricated type 125mm long all as specified and directed.

S&F in repairs 100 mm long mild steel butt hinges, medium weight, cold rolled and fixed all as specified and directed.

S&F in repairs 200mm long aluminium, anodised, barrel tower bolts of extruded section and fixed all as specified and directed.

S&F in repair stainless steel curtain rod 25 mm dia with pair of suitable brackets,finnels and also making good the wall surface to match the existing surfaces complete all as specified and directed.

S&F in repair 300 mm long aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed all as specified and directed.

Dismantling of wall and ceiling boards (fibre, pulp, insulation. etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complte all as specified and directed.

S&F false ceiling of grid of galvanized steel tee/ angle (power coated ) of grid size 600x600mm as directed comprising of main tee ( weight not less than240gm /RM) and angle (weight of section not less than 217gm/RM) all around of walls suspended of ceiling by fasteners of adjustable guide hanger including clips/MS fitments to hold the panels insert of any type, including ceiiling boards of size 595x595x12 mm thick mineral fibre board designer tiles of approved firm fixed in position complete all as specified and directed.

S& F Solid PVC Wall Lining Panelling consisting of 5mm thick wood grin colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing complete all as specified and directed.

S&F in repair European vitretious china wash down water closet pan (excluding flushing cistern but including flush pipe and pvc sheet cover white).

S&F in repairs 10 Ltrs capacity PVC low level flushing cistern complete with syphone handle lever PVC bend including connecting to WC and fixing on walls with bracket all as specified.

S&F in repairs white Plastic water closet seat cover, closed pattern with flat bottom, and mild steel chromium plated or aluminised hinging device all as specified and directed.

S&F CP tubular towel rail 600mm long 20 mm dai complete all as specified and directed.

S&F 25 mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed complete all as specified and directed.

S&F in repair grating doom 75mm dia of SS CP all as specified and directed.

S&F in repair grating doom 100mm dia of SS CP all as specified and directed.

S&F in repair Vitreous china squatting pan of orissa patern size (580 x 440mm) white with integral foot rest (excluding flushing cistern and flush pipe)

S&F in repair Urinal spreader of CP any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) complete all as specified & directed.

S & F in repair vitreous china Urinal, half stall type, white (excluding flushing cistern , flush pipe and waste pipe) complete all as specified & directed.

S&F in repairs Two way Bib cock, fancy type chromium plated cast copper alloy with capstan head, screwed down, screwed for iron pipe or for brass ferrule and fixed complete in all respect as specified.

S&F in repairs Health Faucet mild steel chromium plated suitable for 15 mm dai pipe with 1.25 mtr long flexible tube and wall hook including making connections and fixed in position complete in all respect as specified all as specified and directed.

supply only white cement in bags of 25 Kgs packing complete all as specified and directed.

S & F in repair brass spindle for bib tap, pillar tap, stop cock,angle valve of any description etc complete all as specified & directed.

S&F in repair 15 mm dia bib tap cast copper alloy chromium plated with capstan head handle, screwed down high pressure screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F in repairs 15mm dia fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified.

S&F in repairs 15 mm dia stop valve cast copper alloy brass chromium plated with capstan head handle, screwed down high pressure screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F in repairs 15mm dia angle valve, brass chromium plated, screwed down high pressure, with crutch or butterfly handle screwed both ends for iron pipe on for unions, complete all as specified and directed.

S&F in repairs Brass CP mixer for mixing hot & cold water (for wash hand basin) and fixed including dismantling of 15mm dia chromium plated pillar tap, complete all as specified and directed.

S&F in repairs 15 mm dia wall mixer cost copper alloy chromium plated with capstan head handle, screwed down high pressure screwed for iron pipe or for brass ferrule complete all as specified.

S&F in repairs15 mm dia bib tap PTMT with capstan head handle, screwed down high pressure screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F in repairs 15 mm dia pillar tap PTMT with capstan head handle, screwed down high pressure screwed for iron pipe or for brass ferrule complete all as specified & directed.

S&F in repairs 90 to 110 mm bore PVC (SWR) Pipes single socket, complete all as specified and directed.

S&F in repairs 75 mm bore PVC (SWR) Pipes single socket, complete all as specified and directed.

S&F in repairs PVC bend/tee suitable for 90 to 110mm bore pipe complete all as directed

S&F in repairs PVC bend/tee suitable for 75mm bore pipe complete all as directed

S&F in repairs door closer hydraulically regulated (extruded section) , designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 complete all as specified and directed.

S&F in repairs heavy duty double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box,main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel complete all as specified and directed.

S&F in repairs 19mm thick prelaminated particle board, inerior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screw to timber frame work complete all as specified and directed.

Cleaning and removing all scales and dirt etc from tanks and from mouths of circulating pipe etc for 500 to 1000 ltrs capacity of tanks, complete all as specified and directed.

All as per Srl Item No 49 here-in-before but exc 1000 ltrs and not exc 2000 ltrs.

Dismantling of floor, hearth or wall tiling including cement mortor bedding (but not backing removing serviceable to store and rubbish off the premises complete all as specified and directed.

M&L for Glazed ceramic colour tiles in vertical surface of size 450x 300x7 mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match over 10mm thick cement plaster in CM 1:4 all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.11 sq m but not exceeding 0.18 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed or bedding layer in CM 1:6, all as specified and directed.

M&L for Non Skid ceramic tiles 7 to 8 mm thick(square/ rectagular) area of each tile exceeding 0.18 sq m but not exceeding 0.38 sqm , in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match incl 15mm thick screed bed or bedding layer in CM 1:6, all as specified and directed.

All as per item no 54 above here-in-before but in skirting/ dado all as specified and directed.

M&L in repair rotational moulded polythylene water storage tanks 500 litres capacity (cylindrical vertical with closed top) three layered including cover hoisted and fixed in position complete all as specified including 20 mm brass valve high pressure with polythene float and fly nut complete and GI tank nipple, screwd for iron pipe complete all as specified and directed.

All as per iten no 56 above but 1000 ltr capacity.

All as per iten no 56 above but 2000 ltr capacity.

Taking down wooden/steel chowkhats/door frame including shutter (without taking off shutter) not exc.1.5 Sqm each and removing to or from store complete all as spd & directed.

S&F powder coated ( min thickness 50 micron )Anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified

Anodised aluminium door shutters,aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc. complete all as specified

M&L for easying aluminum door shutter of any description incl taking down shutter and refixing in the same opening after rectifying all defects in the shutter, oiling / servicing of floor spring, hydraulic door closer, tightening all loose screws, cleats, etc replacing all rubber gaskets/aluminium beading complete all as specified and directed. Note: The minor parts such as screws, cleats, oil, rubber neoprene gasket, aluminium beading etc shall deemed to be including in quoted rate.

Uprooting and removing of wild growth trees from wall/roof/chajjas/CI pipes etc any location on buildings including removal of roots, sub roots upto 15cm girth etc, making good with PCC 1:2:4 or concrete in CM 1:3 as directed and finishes the surface matching with adjoining areas of wall/roof etc upto full height of bldgs (i.e. upto 2nd storey bldg), complete all as specified and directed. NOTE:- glyphosate or imazapyr chemical has to be poured into the roots or the hole made for removing tree for prevention of growth of tree or roots into the wall/roof/chajjas/CI pipes.

Uprooting and removing of wild growth/ grass from roof or any location on buildings includings etc making good with PCC 1:2:4 concrete or in CM 1:3 as directed and finishes the surfaces matching with adjoining areas of wall/roof of bldgs (i.e. upto 2nd storey bldg), complete all as specified and directed. NOTE:- triclopyr amine or triclopyr ester chemical has to be sprayed on the surface for removing grass or for prevention of growth of plants shrubs roof/chajjas.

M&L brick work with brick size of 230mm x 110mm x 75mm sub class B brick staight or curved on plan to any radious built in cement mortar (1:6) using sub class 'B' bricks straight or curved on plan exc 6 mtr mean radious including demolition of brick work complete all as specified and directed by the Engr-in-Charge.

M&L Brick work with brick size of 230mm x 110mm x 75mm sub class B brickstaight or curved on plan to any radious in half brick thick wall built in CM 1:4 etc including demolition of brick work complete all as specified and directed by the Engr-in-Charge.

Taking down cement plaster of any description on brick wall or concrete surfaces including raking out joints in brick work, hacking for key, scrubbing down with water etc complete all as specified.

M&L for 15mm thick rendering of ready mix mortar of approved make on brick work or concrete surfaces on walls, finish the surface even and smooth without using extra cement as whole or in patch etc complete all as specified and directed.

M&L for 10mm thick rendering of ready mix mortar of approved make on fair face on ceiling and finished even and smooth without using extra cement complete all as specified and directed.

M & L for pointing in patches n.exc 1.50 Sqm each with cement mortar 1:3 on roof tiles etc and matching with surround surfaces etc all as specified and directed.

M&L for preparation of new surface of wall and apply two coat of Oil Bound Distemper over and including a coat of primer over wall care putty min 2mm thick to obtain an even & smooth surface complete all as specified and directed.

M&L for two coats cement base paint including preparation of new plastered surfaces of wall over one coat of alkali resistant primer complete all as specified and directed.

M&L for three coats of White wash including preparation of new plastered undecorated surfaces on ceiling

Demolition of cement concrete (unreinforced) in ground floors and paving not exc. 15cm thickness (below or above ground level), complete all as specified and directed.

75 mm thick, PCC (1:4:8), type D-2 (using 40 mm graded stone aggregate), as in sub base under floor complete all as specified.

50mm thick fine sand layer spread uniformly over sub base complete all as specified.

M&L for reflective type glossy finish Machine pressed precast concrete interlocking tiles/paver block any colour, shape and size (as approved by GE) conforming to IS 15658 of 60mm thickness M-35 grade with grey cement and no pigment including filling the joints upto full depth with fine sand, complete all as specified and directed by Engr-in-Charge.

Taking down wooden/steel chowkhats/door frame including shutter (without taking off shutter) not exc.1.5 Sqm each and removing to or from store complete all as spd & directed.

S&F for mild steel framed work such as grills, gratings, etc., with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors, angle iron chowkhats; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 including fixing of hold fast with bed block of size 200x200x15mm in CM 1:2:4 (using 20mm graded agg complete all as specified and directed. .

S&F powder coated anodised aluminium frame for windows, ventilators, grill with one or more rebates including necessary joining cleat, powder coated aluminium snap beading, screws for fixing etc. complete all as specified & directed. Note: (1) Only aluminium items to be measured. (2) Glass, wiremesh, handles to be measured & paid separately. (3) Minimum thickness of powder coating to be 50 micron.

S&F aluminium powder coated sliding window comprising of sliding runner of three way aluminium frame section (weight not less than 0.80 Kg/RM) as per series-A, consisting of three sliding shutters made out of section (weight not less than 0.55 Kg/RM) with 5.5mm thick glass and wiremesh (two No sliding glass shutters and 1 No wire mesh shutter) fixed with rubber and aluminium beading including down push type locking arrangement in shutter, fixed the frame with rawl plug complete all as specified and directed.(Note:- min thickness of powder coating not less than 50 micron.)

Taking down wooden/steel chowkhats/door frame including shutter (without taking off shutter) exc.4 Sqm each complete all as spd & directed.

S&F 1.25 mm thick lath Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer and two coat of synthetic enamel paint ;erected in position as indicated, complete:but gear operated type with bevel gear box and crank handle complete all as specified and directed.

S&F in repairs Safety lever locks mild steel with 4 levers for rolling shutters complete all as specified.

S&F in repairs Ball bearing including suitable springs for rolling shutters.

S&F in repair 15mm bore GI tubing, medium grade, with all fittings and fixed including taking down old tubing and connections, complete to walls, ceiling or laid in floor.

All as per item No. 86 above but 20mm bore tubing.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 600mm complete all as specified and directed.

S&F in repairs 32 mm PVC waste pipe 900 mm long with complete all as specified.

S&F sinks with drainage board made of stainless steel lmm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x160mm complete all as specified and directed.

S&F sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes;including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm all as specified and directed.

Vitreous China wash basin, angle back, size 600x480mm white, excluding taps, waste, chain and plug and porcelain stopper but including brackets

Complete removal of existing treatment of ceiling using wire brush/mechanical/ electrical driven sanders including preparation of surfaces etc all as specified and directed

Complete removal of existing treatment of wall using wire brush/mechanical/ electrical driven sanders including preparation of surfaces etc all as specified and directed

M&L for applying layer of 1mm thick white wall care putty for finishing the surface even to true aligned surface of wall/ceiling and smooth using sand papers etc all as specified and directed by Engineer-in-charge.

M&L for applying two coats of oil bound distemper on prepared surfaces (approved quality & tint) using machine spray on wall all as specified and directed.

All as per item No 96 above but on ceiling.

M&L for applying two coat of cement base paint (approved quality & tint) on walls complete all as specified and directed.

Material & Labour for applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces all as specified and directed.

M&L preparation of old painted of wood or wood based surfaces of any description over 10 cm width or girth and applying one coat of synthetic enamel paint complete all as specified and directed.

M&L for preparation of old painted to steel and iron surfaces of any description over 10 cm width or girth not other wise described and applying one coat of synthetic enamel paint including easening of steel window by providing lubricant oil to hinges/pivot complete all as specified and directed.

M&L for preparing old painted surfaces and appling one coat of SE Paint on plastered / concrete surfaces all as specified & directed.

M&L for applying Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per\square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as perapproved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings.complete all as specified (Payment for providing grooves shall be made separately). it also includes cutting & extirpating of small trees or plants in walls.

Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens, nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-charge

S&F 35 mm thick 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats incl one shop coat of pink primer as speicifed and directed.

S&F Solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M S square tube supplying and fixing in opening as per specification & drawing. it shall be wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed.

S&F Factory Made Solid panel PVC door shutter 30mm thick(style) consisting of frame made out of MS tubes for top and bottom rails MS frame shall be covered with heat moulded plain colour PVC "C" channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail and bottom rail on either side and as gap insert for top rail and bottom rail panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles and rails with suitable PVC sheet beadingand jointed together with solvent cement fixing in the frame at site as per specifications and drawing.it shall be laminated with wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading.complete all as specified and directed..

S&F 30mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as spcified and directed.

M&L for 17 to 20 mm thick granite (shade as approved of any type) work (table rubbed and polished) in window-cills, cooking platforms, sides of cooking platforms etc and like including 15mm thick screed bed in CM 1:4 including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, polishing & half rounding of edges, making hole for gas pipe incl demolition of stone slab/pcc if any complete all as spd & directed.

M&L for machine cut kota stone slab flooring 20-25mm thick laid over 20mm thick screed bed in cement mortar 1:6 and jointed with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete all as specified and directed.

M&L in repair rotational moulded polythylene water storage tanks 1000 litres capacity including tank cover (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified including 20 mm brass valve high pressure with polythene float and fly nut complete and GI tank nipple, screwd for iron pipe complete all as specified and directed.

S&F in repair vitreous china oval shape wash hand basin for counter fix in granite complete all as specified and directed.

S&F in repair single piece vitreous china EWC with soft close seat cover rimless complete all as specified and directed.

M&L in repair rotational moulded polythylene water storage tanks 2000 litres capacity (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified including 20 mm brass valve high pressure with polythene float and fly nut complete and GI tank nipple, screwd for iron pipe complete all as specified and directed.

S&F 52 mm thick PVC Partition consisting of 12mm thick plain solid PVC ply sheet both sides reinforced with frame work made from 40mm x 20mm MS tubes. In between two MS tubes, 5mm thick Plain heat moulded 'C channel of size 75mmx50mm with feathered edges shall be fixed on the floor, wall and ceiling. Plastic ply opanel shall be inserted in the PVC 'C channel.The first & last MS tube should be errected such that it is inside a PVC 'C channel, in between adjoining plastic panel, 5mm thick x75mm width plain PVC sheet feathered at edges shall be stick on the front & back face using solvent cement complete all as specified and directed.

M/S DSSP Construction Co. (BID ID -3312722)

K S CONSTRUCTIONS (BID ID -3316377)

SHRI JI ENTERPRISES (BID ID -3316041)

MAA SANTOSHI ENTERPRISES (BID ID -3315638)

M/S Ayub Khan (BID ID -3316253)

A S CONSTRUCTION CO. (BID ID -3315588)

SHIVA ENTERPRISES (BID ID -3316282)