Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.9 CrAdmitted-Finance | ₹5.9 Cr | L1 | Admitted-Finance |
| Sl No | Description | Qty | Unit | M/S R B ASSOCIATE L1 |
|---|---|---|---|---|
| 0.00Electrical Works. | ||||
| 1.00 | Supply & erection of steel tublar pole 410-SP-44, 10 M long, 168 Kg. For Street Ligth network complete with cap 1/6th number of overrall length of pole in cement concredt with 30 cm dia cement plinth all round the pole and 30cm above ground level. The foundation of underground will be of cement concrete in the ratio of 1:3:6 alround the pole. The brick ballast used will be of 1.2 cm size with stone pad 30 cm X 30cm. x 7.5 cm. at the base. The cost includes all materials including MS pole cap complete in all restepects (bottom proation of the pole 5.0 mtr. shall be galvanized zinc coating 360 gms/sq/ mtr, minimum thickness of 51 microns. | 288 | Nos | 15,900 ₹45,79,200 Lowest |
| 2.00 | Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with Double arm bracket (1 Mtr length each ) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. Make- Philips, Bajaj, Crompton, Wipro | 159 | Nos | 25,700 ₹40,86,300 Lowest |
| 3.00 | Supply and fixing of 70 watt LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 70 watt. Confirming to IP66 Protection complete in all respect.CAT-AA. minimum effecuency LM/W 135 lum./W, surge protection 10kv, over voltge cut off limit 280V ac. Make- Philips, Bajaj, Crompton, Havells, Wipro (with Five Years Warranty) | 1,877 | Nos | 5,620 ₹1,05,48,740 Lowest |
| 4.00 | Supply and fixing of 90 watt LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 90 watt. Confirming to IP66 Protection complete in all respect.CAT-AA. minimum effecuency LM/W 135 lum./W, surge protection 10kv, over voltge cut off limit 280V ac. Make- Philips, Bajaj, Crompton, Havells, Wipro (With Five Years Warranty) | 1,500 | Nos | 6,150 ₹92,25,000 Lowest |
| 5.00 | Supply and fixing 40 Amp TPN capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses/MCB, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect. | 80 | Nos | 33,000 ₹26,40,000 Lowest |
| 6.00 | Supply and erection of factory fabricated and wired metal clad dust and vermin proof floor mounting panel TPN switch board complete with the following HRC type heavy duty TPN fuse switches with fuses and instrument chamber etc. complete in all respects. The instrument chamber shall be separate and shall comprise of flush type ammeter, voltmerer, selector switches for ammeter and voltmeter, instrument fuses, current transormer etc. The board shall have suitable capacity electroytic alumininum busbars as per IS8623 istulate with heat shrink sleeving and mountend on non hygroscopic supports such as CMC/DMC support with deteachable side covers and shall be suitable for extension on the sides. The switches shall be complete with suitable cable end boxes, reverse entery boxes in case of pedestaal type, cable sockets, compression glands and indicating lamp on incoming etc. The job includes the grounting of the board as per direction of Engineer-in-Charge. All coutgoing switches of 100 Amp. and above will be provided with ampere metre current transformers and selector switches and instrument fuses etc. The switches board shall be fabricated with CRCA sheet with a minimum thickness of 1.6 mm/2 mm. Cubicle type switch board shall be of cat A B & B-II and pedestal type for Cat-B and C only. INCOMING 315 Amp TPN-1 NO. & OUTGOING 63 Amp TPN-5 Nos. | 1 | Nos | 1,20,000 ₹1,20,000 Lowest |
| 7.00 | Supply & Laying of 63 mm HDPE pipe ISI marked along with all accessories like socket,bend,couple etc. confirming to IS 14930 Part II complete with fitting and cutting,jointing etc direct in ground (75 cm below from ground level) including excavation and refilling the treanch. including cost of material,labour and T&P. | 5,000 | Mtr. | 210 ₹10,50,000 Lowest |
| 8.00 | Supply & Laying of 120 mm HDPE pipe ISI marked along with all accessories like socket,bend,couple etc. confirming to IS 14930 Part II complete with fitting and cutting,jointing etc direct in ground (75 cm below from ground level) including excavation and refilling the treanch. including cost of material,labour and T&P. | 160 | Mtr. | 402 ₹64,320 Lowest |
| 9.00 | Supply and Laying of 16x2 core aluminium conductor PVC insulated unarmoured served double shethed cable 1100 volt grade pole to pole. Make : Havells, Polycab, Grandlay, Gloster. | 24,132 | Mtr. | 100 ₹24,13,200 Lowest |
Tender Value
₹6.0 Cr
EMD Value
₹12.1 L
Closing Date
16 Jun 2023, 6:00 pmClosed
PGM (R) UPSIDA
Office of the PGM(R) UPSIDA Kanpur
Upgradation of Street light network along with AMC for three Years at IA. Surajpur Site- B and C Housing Kasna Site 4 and 5 and EPIP Distt Gautambudh Nagar
2023_SIDC_810522_1
ED-II(65) Date 26.04.2023
Open Tender
Electrical Works
Item Rate
1215 days
Gr Noida
As per Tender Documents
2 documents required · 2 mandatory
₹10,075
FC
₹12.1 L
22 Jun 2023
9 Jun 2023
17 Jun 2023
9 Jun 2023
16 Jun 2023
9 Jun 2023
Amount
Electrical Works.
Supply & erection of steel tublar pole 410-SP-44, 10 M long, 168 Kg. For Street Ligth network complete with cap 1/6th number of overrall length of pole in cement concredt with 30 cm dia cement plinth all round the pole and 30cm above ground level. The foundation of underground will be of cement concrete in the ratio of 1:3:6 alround the pole. The brick ballast used will be of 1.2 cm size with stone pad 30 cm X 30cm. x 7.5 cm. at the base. The cost includes all materials including MS pole cap complete in all restepects (bottom proation of the pole 5.0 mtr. shall be galvanized zinc coating 360 gms/sq/ mtr, minimum thickness of 51 microns.
Supply & fixing of 9 mtr GI Octagonal Pole of approved make (top dia 70mm, Bottom dia 155 mm and base plate 12mm thik) having 3mm thikness with Double arm bracket (1 Mtr length each ) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and Required T&P completee in all respect. Make- Philips, Bajaj, Crompton, Wipro
Supply and fixing of 70 watt LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 70 watt. Confirming to IP66 Protection complete in all respect.CAT-AA. minimum effecuency LM/W 135 lum./W, surge protection 10kv, over voltge cut off limit 280V ac. Make- Philips, Bajaj, Crompton, Havells, Wipro (with Five Years Warranty)
Supply and fixing of 90 watt LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 90 watt. Confirming to IP66 Protection complete in all respect.CAT-AA. minimum effecuency LM/W 135 lum./W, surge protection 10kv, over voltge cut off limit 280V ac. Make- Philips, Bajaj, Crompton, Havells, Wipro (With Five Years Warranty)
Supply and fixing 40 Amp TPN capacity of automatic street light cubicle control panel painted with anti corrosive alkali and acid proof paint consisting of time switch TSO 100 series with contactors, HRC fuses/MCB, isolating switch metering instrument & instrument box with CTs etc. in case of TPN, complete in all respect.
Supply & Laying of 63 mm HDPE pipe ISI marked along with all accessories like socket,bend,couple etc. confirming to IS 14930 Part II complete with fitting and cutting,jointing etc direct in ground (75 cm below from ground level) including excavation and refilling the treanch. including cost of material,labour and T&P.
Supply & Laying of 120 mm HDPE pipe ISI marked along with all accessories like socket,bend,couple etc. confirming to IS 14930 Part II complete with fitting and cutting,jointing etc direct in ground (75 cm below from ground level) including excavation and refilling the treanch. including cost of material,labour and T&P.
Supply and Laying of 16x2 core aluminium conductor PVC insulated unarmoured served double shethed cable 1100 volt grade pole to pole. Make : Havells, Polycab, Grandlay, Gloster.
Supply and Laying of 16x4 core aluminium conductor PVC insulated unarmoured served double shethed cable 1100 volt grade pole to pole. Make : Havells, Polycab, Grandlay, Gloster.
S/L of 16x4 core Al. armoured cable PVC insulated Ar. served & sheathed cable 1100 V grade at a depth of 750 mm below ground level in existing DWC HDPE PVC Pipe/GI Pipe/RCC Pipe/MS Pipe etc or along The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Make -Grandlay / Havells/Polycabe/Gloster.
S/L of 16x4 core Al. armoured cable PVC insulated Ar. served & sheathed cable 1100 V grade at a depth of 750 mm below ground level ground with protection of burnt bricks on sides and top put acriss with over a cushion of 75 mm thick sand arround the cable complete in all respect as per direction of E/I.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Make -Grandlay / Havells/Polycabe/Gloster.
S/L of 25x3.5 core Al. armoured cable PVC insulated Ar. served & sheathed cable 1100 V grade at a depth of 750 mm below ground level Laying of cable in existing DWC HDPE PVC Pipe/GI Pipe/RCC Pipe/MS Pipe etc or along the wall/Pole/Panel/High Mast.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Make -Grandlay / Havells/Polycabe/Gloster
S/L of 25x3.5 core Al. armoured cable PVC insulated Ar. served & sheathed cable 1100 V grade at a depth of 750 mm below ground level Laying of cable in ground with protection of burnt bricks on sides and top put acriss with over a cushion of 75 mm thick sand arround the cable complete in all respect as per direction of E/I.The armouring of the cable shall be properly connected with the earth conductor by clamps etc. Make Grandlay / Havells/Polycabe/Gloster
Supply and laying of 70x 3 core standered aluminium conductor XLPE (Cross linked polyethylene) insulated PVC bedded, Galvanised flat steel strip armoured cables confirming to I.S. 7098 (Part-II with latest amendments) II KV grade at a depth of 900 mm below ground level in existing DWC HDPE PVC Pipe/GI Pipe/RCC Pipe/MS Pipe etc
Supply & Laying of cable in ground with protection of burnt brick on sides and top put with over a cushion of 75mm thick sand arround the cable complete in all respect as per direction of E/I. The armouring of cable shall be properly connected with earth conductor by clamps etc. Make -Grandlay / Havells/Polycabe/Gloster.
Supply and laying of 6x2 core aluminium conductor PVC instlated, unarmoured cable 1100 volt grade suface/all pole to pole/existing DWC pipe/steel pipe including cost of all material, T&P. Make : Havvells/polycab/Grandlay, Gloster.
Supply and Fixing on type(MPO-5) heat shrinkable jointing kit suitable for XLPE 11 KV HT Cable outdoor type including all materials labour and T&P required for proper completion of work.
S/F of Plain or Pin type copper tin plated cable socket (Lug) to the 10 sq.mm cable lead, insulating with tape and making connector etc. Complete in all respects as per Direction of E/I
S/F of Plain or Pin type copper tin plated cable socket (Lug) to the 16 sq.mm cable lead, insulating with tape and making connector etc. Complete in all respects as per Direction of E/I.
S/F of Plain or Pin type copper tin plated cable socket (Lug) to the 25 sq.mm cable lead, insulating with tape and making connector etc. Complete in all respects as per Direction of E/I.
Supply and burying of 40mm dia x 4.5 metres long G.I. Pipe vertically for earthing having 12mm dia. Holes spaced 75mm apart drilled up to 2 metre from the bottom complete with earthing lead of No. 6 to 8SWG GI wire in G.I. Pipe up to appron (and from appron to switch board the cost of G.I. wire and pipe will be extra) upto switch board, 30cm square C.I. box with hinged cover masonary enclosure, funnel at top, alternate layers of charcoal/coke and salt at least 150mm thick alround etc. as per directions of Engineer-in-charge complete in all respects as per drawing.
Supply & fixing of 50 mm dia GI pipe B class for climbing up the cable from ground to over head LT line pole/Metering point complete with GI fitting including material,labour and T&P.
Supply & fixing of MS Clamp made out from 50x6 mm MS flat for securing GI Pipe/HDPE With ST Pole
Supply and erection of doble pole 410-SP-56, 11 m long, 241 Kg complete with 1/6th of overall length of pole below ground level with 45 cm dia cement concrete with 45cm dia cement plinth around the pole and 45cm above the ground level.
Supply and fixing of 11 KV pin insulator complete.
Supply and fixing of Ms angle50x50x6x2028mm on double pole structure complete with clamp, Nut & Bolt forT/F Base.
Supply and fixing of MS Top Channel of 125x65x2240mm including cost of holding clamps and materials men &T&P
Supply and fixing of T-off chanel as per site requirment.
Supply & Fixing of outdoor type 11 kv fuse set relco/rama/rastirya make with insulator complite in all respect .
Supply and fixing of 11 kv TPMO with comp;ete with insulator &other acessories(Relco/Azad/Rama/Other standerd make as approved by UPPCL.
Supply, sagging, jointing and binding of ACSR Weasel conductor including cost of aluminium tape binding wire and jointing sleaves etc. complete in all respect including men & material, T&P proper completion of work as per direction of Engineer in-charge.
Supply and fixing of MS Dropper Channel of 100x50x2000mm including cost of holding clamps and materials men &T&P
Cleaning and sprat painting of S.T. bend pole and power ST. pole upto (7 mtr. Height in handed over pole) with one coat red oxide primer and two coat alum. Paint/ pu. Along with retro-reflective paint in bottom section of approx 1 mtr. enhance night time visibility for better pole safety as per direction of engineer in charge incluiding cost of materials men and T&P (Burger/Nerolac/Asian make)
Supply & fixing of danger board fabricated from 10 gauge M.S Sheets as per Technical Specification of UPPCL.
Supply and fixing of anticlimbing device fabricated from G.I flat of 25mmx6mm size in sape of ring of the pole size heving G.I. flate pointed fins of length 225 mm in 8nos and also barbed wire in 200 mm length above the said ring including material
Supply and erection of stay of ST pole with GI anchor plate (152x152x6mm) stay rod (16mmx1.85m long) GI stay below (16mm dia rod, triple,double stay tightener, stay insulator, clampas & stay wire (GS 7/3 .15MM) including grouting in 1:4:8 ratio of cement corcente using coars sand , over burnt brick ballast as per direction of engineer in charge complete in all respect.
S/B of 600mm x 600 mm x 6 mm G.I. plate vertically for earthing with its top at least 3 mtr below ground level having complite whith 20mm dia GI pipe and funnel for watering and one earting lead of two no.8 to 10 SWG GI wire in 15 mm dia GI pipe upto swich board( from appron to switch boaed the cost of GI pipe and GI wire will be extra) 30cm square CI frame with hinged cover masonry housing alternate layers of charcol/coke and saltatleast 150 mm thick alround etc. as per direction E/I complete in all respect.
Supply & Fixing of 32 mm dia 1.2 mtr long GI Pipe Bracket for fixing of SPSP/LED Street Light Fitting. Complete in all rescpect.
Supply & fixing of LT shackle insulator including cost of materials, man and T&P.
Supply & fixing of MS Box for controlling of LED Street Light and with arrangement to avoid entry of moisture as well as rainwater etc. with 4 way cadmimium connector and 20A SPMCB (Legarnd) including making connector Complete in all rescpect.
Supply & erection of "D" clamps of 50 mm x 6mm flat iron on steel tubular poles / steel rail poles with bolts, nuts etc. complete in all respects including painting with aluminium paint. Complete in all respect.
S/L of 25x3 mm. G.I. Strip from earth electrode directly in the ground as required complete in all respects.
SITC of Outdoor Type Aluminium Wound Oil Cooled Transformer of rating 25 KVA, 11/0.433 KV on double pole including cost of base channel & Holdng clamps by PVVNL
Fabrication, Supply and Fixing of Work Information Board in MS Frame made by 50 mm dia sqare pipe of stainless steel grade SS-304 and 16 mm thick base plate with back supporting of bracing by MS Flat of 25x6 mm and 2.85 M long supporting leg made from 65 mm pipe SS-304 grade with proper grouting arrangement. The board should be retro reflective type in green colour with white letters as required and shall be fixed at height of 1.2 M from ground by providing 0.45 x 0.45 x 0.60 mtr ntr cement , concrete, stone, ped as per drawing enclosed.
Supply and erection of over head line with GI wire no.8 SWG to 4 SWG on pole /service bracket including binding etc.complite in all respect.
S&F single unit Aviation obstruction blinking RED LED Light with making connection etc. complete in all respect on top of the as per direction of engineer incharge. CAT AAA (AMC work for 03 yrs)
S&F junction box made from MS Sheet of 200x300x100mm duly painted, complete with cable glands, connector etc. suitable for 24 Nos. Flood lights connection. (AMC work for 03 yrs)
S&F Annealed tinned Copper flexible soft PVC /Rubber insulated trailing cable of 4 sq.mm 4/5 core. (AMC work for 03 yrs)
Supply and fixing of male-female plug socket for 16 meter high mast lighting system complete in all respects.(AMC work for 03 yrs)
Rewinding/Repairing of 1.5 HP 3 Phase 415V Burnt AC Power Tool Motor with B-Class super enamel Copper wire including dismantling and re-fixing at Original place. (AMC work for 03 yrs)
Supply & top-up gear oil in winch machine by opening gear box including cost of material,men and T&P. (AMC work for 03 yrs)
Oiling & greasing of SS wire rope set and other moving parts by lowering down,re-hoisting of lantarn carriage including cost of material,men and T&P.(AMC work for 03 yrs)
S&F double drum 750 Kg winch machine suiable for high Mast Light including making/modification proper arrangement for installation in existing shaft.(AMC work for 03 yrs)
Supply & fixing GI lantern carriage made from 50NB ERW Class B Pipe suitable for 24 lighting fixing including lowering & hoisting of system and all other associated work along with cost of men, material and T&P. (AMC work for 03 yrs)
S&F of stainless steel grade AIS1316 steel wire rope set 6-8mm diameter on existing winch machine including making/modification proper arrangement for installation in existing machine. (AMC work for 03 yrs)
Supply & fixing 3-Phase Power Contractor ML-4 type or equel for Automatic Street & High Mast Control Panel in cluding cost of Connection, men and T&P. (AMC work for 03 yrs)
Supply & fixing Astronomical time switch L&T/Siemens/C&S or equel brand including cost of connection, material, men and T&P.(AMC work for 03 yrs)
S&F of 63 amp. 4 pole MCB (10KA cat B) for control panel complete in all respects (AMC work for 03 yrs)
Supply & fixing jointing sleeve for Insulated ACSR Weasel conductor for cost of all material,men and T&P. (AMC work for 03 yrs)
Supply and making straight through joint with cast resin compound including ferrules and other joints materials for following size of PVC insulated and PVC sheathed/XLPE aluminium conductor 25/35/50 sq.mm 3.5 core cable of 1100 v grade complete rates (AMC work for 03 yrs)
S&F of 63 Amp. 415 V metal clad T.P.N. rewireable typeswitch fuse unit on angle iron bracket complete in all respect. (AMC work for 03 yrs)
S&F of 6-32 amp. double pole MCB (10KA cat B) for control panel complete in all respects. (AMC work for 03 yrs)
Supply & fixing Sheet steel enclosure for SP/DP MCB with neutral link and earth terminal (AMC work for 03 yrs)
Painting letters (Pole No.) 2.5cm up to 8.0 cm size complete on Street light Pole/Panel/Other electrical properties under UPSIDA including cost of all material, men and T&P. (AMC work for 03 yrs)
Cleaning & spray painting of ST bend pole and power ST pole (up to safe height) with one coat of red oxide primer and two coat of alum. paint/PU paint as per direction of Engineer incharge including cost of all material, men and Hydraulic crane, other T&P. Paint should be of Burger/Nerolac/ Asian make. (AMC work for 03 yrs)
Trimming of tree branch around the street light pole/ST pole/Central Varge for proper illumination & proper disposal of tree branch collecting on trolley or similar moving item including cost of men, trolley, T&P etc. (1000 x 3 Year)
Dismantling of damaged ST pole which cause to any accident of men and UPSIDA property. in industrial area including cost of men and T&P and shifting to store charge. (AMC work for 03 yrs)
Strengthen of Other ST pole foundation by providing new concerting including cost of all material men and T&P. (AMC work for 03 yrs)
Dismantling & re-grouting of street light/Steel tubler (upto 12 Mtr long) Tilt/sick bend pole in 1:3:6 ratio cement concrete with stone pad including strengthening of pole by providing additional 04 Nos. support of 65x65x6mm or higher size MS angle in suitable length with the help of welding/cutting as per technical specification.
Providing pole earthling of an existing pole by inserting MS Rod 20x2500mm in vertically ground level and connecting the pole with the help of 6 SWG GI wire including cost of all material, men and T&P. in industrial area as per UPSIDA/UPPCL Technical specification.
Hiring Charge of 80-100 feet expandable street light repairing hydraulic lift, capacity 300 Kg including cost of operator, mounting vehicle and fuel etc. (8 Hrs x 4 day x 36 Month) (AMC work for 03 yrs)
Cost of material spares, wire, fuses, small accessories, alum. Lug up to 16 sq.mm , small cable gland , insulation tap,plastic tie, screw, nut & bolts, old cloth, cleaning spray and other small associated required for up-gradation work etc. (AMC work for 03 yrs)
Supply & fixing additional MCCB 80-100A(16 KA) CAT A in LT Panel including interconnection.
Supply and fixing of 3 Watt to 6 Watt LED Spot/Spike light luminaries Confirming to IP 66 as per technical specification aaproved by engineer in charge.
Supply & laying 3x1.5 sq.mm PVC copper cable in existing DWC/HDPE pipe including cost of material, men and T&P as per technical specification aaproved by engineer in charge.
Supply and fixing 15W to 18W indoor Recess mounting LED square/round down lighter fitting poweder coated die cast aluminium housing for with extended heat sink ,diffuser built with driver complete in all respect. CAT A
Supply & laying 25mm PVC /DWC/HDPE pipe 500mm below ground level including cost of all material, men and T&P as per technical specification aaproved by engineer in charge.
Buy Back of Old/Defective/Damaged Scrap 150W/250W HPSV luminaries complete fiiting as is as where condition.
Buy Back of very Old/Defective/Damaged/Scrap 70-90Watt LED luminaries complete fiiting as is as where condition.
stage.html
html • 0.02 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.71 MB
BOQ_1358343.xls
BOQ • 0.32 MB
TenderDocumentOFUPSIDA.pdf
Tender Documents • 1.28 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .