Certain repairs to antenna wall and fencing under the AoR of DIPAC under AGE (I) (U) B/R, Delhi Cantt-10.

Amount

Dismantling of brick work built in cement mortar including all quoins,pillars etc but excl ashlar facing,dressed work and precast concrete complete all as specified and directed.

Taking down cement plaster including raking out joints, hacking for key,scrubbing down with water built in cement mortar.

Dismantling of cast iron /PVC pipes 75/100mm dia complete all as specified and directed by Engineer-in-Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

Excavation in trenches, n.exc 1.5 m wide and n.exc 1.50 m in depth for foundation etc or for shafts, wells, cesspits, manholes, pier holes etc not exc 10 sqm on plan and n.exc 1.5 m in depth and getting out in soft/loose soil complete all as specified and directed.

Returning, filling in, spreading, levelling, watering and well ramming in layers not exceeding 25cm thick each complete all as specified and directed.

Removing of excavated soil to a distance not exceeding 50m and depositing where directed at a level not exceeding 1.5m above the starting point complete all as specified and directed.

M&L for PCC (1:4:8) type D2 using 40mm graded aggregate for foundation filling and mass concrete etc complete all as specified & directed.

M&L for providing, cement concrete Type B-0 1:2:4 (12.5mm graded stone aggregate) in roof kerbs or mud stops, rounded or chamfered on edges, in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, as directed complete all as specified & directed.

S&F of 110mm bore PVC (SWR) pipes single socketed in any length as in weep holes complete all as specified & directed.

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6 m mean radius, built in cement mortar 1:6 complete all as specified and directed.

Removing mortar from and cleaning bricks, stacking for measurement including all extra handling and removal and disposing off rubbish.

M&L for brick work with sub class "B" bricks (old size) straight or curved on plan exc 6m mean radius, built in cement mortar 1:6 but excepts bricks complete all as specified and directed.

M&L for washed stone grit plaster on exterior walls in two layers,under layer 12mm cement plaster 1:4 (1 cement :4 coarse sand) furrowing the under layer with scratching tool,applying cement slurry on the under layer @ 3 Kg of cement per square metre,top layer 15mm cement plaster using white cement in the top layer of the item of washed Marbal stone chipping grit plaster 1:1/2:2(1 White Cement:1/2 coarse sand:2 Marbal stone chipping 10mm nominal size) including pigment(colour) to be added as per approved by Engr-in-Chrage in panels with groove all around as per approved pattern including scrubbing and washing,the top layer with brushes and water to expose the stone chippings complete all as specified and directed by Engr-in Chrage (Payment for providing grooves shall be made separately).

M&L for forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens,nailed to the under layer including removalof wooden battens,repair to the edges of panels and finishing the groove complete as per specifications and direction of the Engineer-in-Chrage.

M&L for framed work such as gate(any size), grills,gratings,etc with ends of bars shouldered and/or riveted,or forged into spikes framed guard bars barred iron doors ladders framed balusters,walk ways,railing,framework of water tank,Y-shape angle iron and similar work con-forming to Fe.290.Gde-E-165.

M&L for preparation of new steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for preparation of old steel surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed.

S&F of pre-painted gaivatume aluminium sheet zinc coatin GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall fixed with self tapping screws complete all as specified and directed.

M&L for 20 mm thick Z- Black or approved shed granite ( of any type ) work (table rounded and polished) in steps, coloumn,jambs, brick pillars, window-cills, cooking platforms and like in 15mm thick cement mortar 1:4 including pointing in white cement 1:2 using marble dust with admixer of pigment to match with shade of granite complete incl dismantling all as specified and directed.

S&F in repair concirtina coil with punched tape concertina coil 600mm dia 10 mtr openable length having 50 Nos rounds per 6 mtr length, spring core wire (2.5mm thick) of high tensile strength of 165kg/Sqmm with tape (0.52 mm thick and weight 43.478 gm/metre and fixing the same with Y- shape angle iron with 06 horizontal R.B.T (Reinforced Barbed Tape) wire, stud tied with GI staple and GI clips to retain horizontal complete all as specified and as per directed by Engineer-in-Charge.

HANUMAN BUILDERS

A V ASSOCIATES

ARYA ENTERPRISES

ergon enterprises

friends associeates

GLOBAL DEVELOPERS COMPANY

KISHORE ENTERPRISES