REPAIR TO WOODEN JUNGLA/ FENCING, AREA DRAINS, PAVER/TILES BERMS AND OTHER MISC WORKS IN ZONE B AOR AGE B/R-II UNDER GE 864 EWS JOB NO- TPP 2024-25

Amount

Excavation in trenches not exc 1.50 mtr wide and not exc 1.50 mtr in depth for foundation, shafts, cesspits, manholes, pier holes etc. not exc 10 Sqm on plan and getting out in any type of soil, complete all as specified and as directed.

M&L for PCC (1:3:6), type C-2 (using 40mm graded crushed stone aggregates) as in foundations, filling in and mass concrete, complete all as specified and as directed.

Returning, filling in including spreading, leveling, watering and well ramming in layers not exc 25cm thick, complete all as specified and as directed.

Removing of excavated soil to a distance not exc 50 mtr and depositing where directed at a level not exc 1.50 mtr above the starting point, complete all as specified and directed.

Demolition of brickwork or stone/boulder masonry, built in cement mortar including all quoins, arches, pillars, etc, but excluding ashlar facings, dressed stonework and precast concrete articles etc complete all as specified and directed.

M&L for brickwork with old sized subclass 'B' bricks straight or curved on plan exc 6m mean radius and built in CM 1:6 etc complete all as specified and directed.

M&L for Precast cement concrete hollow block masonry exc. 10 cm in width and setting in mortar complete type 1:2:4 (using 16mm graded aggregate) and set in CM 1:6 etc complete all as specified and directed.

M&L for walling of random rubble, uncoursed, well bonded, bedded and solidaly hearted, built in CM 1:6 etc complete all as specified.

M&L for raking out joints/flush pointing in CM 1:4 to random rubble masonry uncoursed or brought up to courses on old walls built in cement mortar all as specified and directed.

Taking down cement plaster of any description, on brick or stone walls etc. including raking out joints, hacking for key, scrubbing down with water etc complete all as directed.

M & L for rendering plaster 15mm thick cement plaster in CM (1:4) on brick work or concrete surfaces finished even and fair without using extra cement all as specified and directed.

M & L for rendering 10mm thick cement plaster in CM (1:4) on brick work or concrete surfaces finished even and fair without using extra cement all as specified and directed.

M&L for PCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregates) as in coping etc. including weathering, slightly rounded or chamfered angle and throating, including necessary use and waste of formwork complete all as specified and directed.

Demolition of reinforced Cement concrete of any description and in any position not otherwise specifically provided for complete all as specified and directed.

M&L for precast RCC (1:2:4) type B-1 (using 20mm graded crushed stone aggregate) as in cover slab for manhole or similar work set in CM 1:6 including necessary use and waste of formwork, complete all as specified and directed.

M&L for mild steel TMT bars 10mm dia and over for manhole covers & similar work, cut to legnth, bent to shape reuqired including cranking, bending spriedly for hooping ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia. complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and directed.

S&F for Framed brackets of angles or tees with web and flanges cut to shape,drilled and countersunk for screw, including bending and welding angles, as necessary, gusset plates, riveting, etc. n exc 10 kg each brackets, conforming to Fe.290.Gde-E-165 all as specified.

S & F for framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; iron gate, ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge thickness , including nanital or similar pattern roof covering complete all as specified and directed.

S&F for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet (any pattern) 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified and directed.

S&F for Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified

M&L 0.63 mm galvanised, corrugated mild steel sheeting with two corrugation side lap, fixed with L type or J type or cranked hook bolt, in roof, wall etc with grade of zinc coating 275 complete all as specified.

S&F Steel water tubing medium grade galvanised with all fitting and fixtures complete to wall and ceiling or laid in floors of 15mm bore including taking up or down steel tubing and connections, including cleaning for refixing all as specified.

-Ditto- all as per srl item No 24 above but 20 mm bore pipe complete all as specified and directed.

S&F 110 mm dia PVC (SWR) pipes including necessary fittings, single socketed in any length with rubber ring joints fixed to walls including all fittings like heads, shoes, bends, swan-necks, etc and taking down eaves gutters and rainwater pipes (any size or pattern), complete all as specified and directed.

-Ditto- all as per item No 26 above but 75mm size.

-Ditto- all as per item No 26 above but 150mm size.

Demolition of cement concrete (un reinforced) in ground floor & pavings n exc 15 cm thick below or above ground level complete all as specified and directed.

M&L for 25mm thick cement concrete 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base/levelling course complete all as specified.

M&L for 75mm thick PCC (1:4:8), Type D2 (using 40mm graded crushed stone aggregates) as in sub base or floors etc. complete all as specified and as directed.

M&L for rubber moulded chequered cement concrete tiles with grey cement cement and pigments 20cm x 20cm x 25mm thick, set, jointed and pointed in neat cement slurry in floors over and including 20 mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.

M&L for rubber moulded Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade , with grey cemeent and no pigment including 30 mm thick sand cushioning complete all as specified and as directed.

M&L for providing precast cement concrete louvres and jallies, 25mm thick (measured solid), including all mouldings including frame work, 1:2:4 type B-0 (12.5mm graded stone aggregate), set in CM 1:4 including dismantling old RCC jallies complete all as specified and as directed.

M&L for 2nd class soft wood jafri 40mm x 12mm laths (fixed straight or diagonally) in two way trellis work with 75mm spaces in the clear, including 75mm x 50 mm fillet (notched to take ends of laths) all round and fixed complete all as specified and as directed.

M&L for 2nd class soft wood jafri 100mm x 20mm laths (fixed straight) in one way trellis work with 100mm spaces in the clear, including 75mm x 50 mm fillet (notched to take ends of laths) all round and fixed complete all as specified and as directed.

M&L for 2mm thick Fibre glass reinforced translucent corrugated sheeting with two corrugations side lap fixed with coach screw and washer in roof, wall etc including dismantling of old fibre sheets complete all as specified and as directed.

S&F mild steel Steel rolling shutters, thickness of laths 1.25mm, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete: push pull or manual type, including running channel, sefety lever locks complete all as specified & directed.

Ditto- all as per item No 38 above but with gear operated type with bevel gear box, chain and crank handle.

Supply only MS Galvanised chain link fencing (not less than 1.75 Kg/Sqm) any size or type complete all as specified and directed.

Fixing only chain link fencing including line wires, any mesh, size and type to any type of standards, rails, straining bolts, etc. including provission of binding wire

Excavating in post holes in any type of soil(or similar holes) each n exc 0.5 cu. m, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface complete all as specified and directed.

M&L for preparation of new or previously untreated steel surfaces of any description over 10 cm width or girth and apply two coats of synthetic enamel paint over a coat of red oxide primer.

M&L for Preparation new wooden surfaces and applying two coat of synthetic enamel paint over one coat of pink primer surface of any description not other wise described over 10 cm width or girth complete all as specified and directed

M&L for preparation of newly plastered wall surfaces and applied two costs of cement base paint over a coat of white wash all as specified and directed.

M/s Lal Enterprises (BID ID -3177151)

M/S Himalayan Construction and Co. (BID ID -3182699)

D N ENTERPRISES (BID ID -3177162)

M/S NORTHERN ELECTRICAL WORKS (BID ID -3177309)

M/S VALLEY ENTERPRISES (BID ID -3182544)

AHMED CONSTRUCTIONS AND INFRA PVT LTD (BID ID -3182657)