NCMC - Supply and fixing of 80mm to 250mm DI/CI sulice valves in various places of East side ( 7681/2025/E2)

Earth work excavation and depositing on bank with initial lead of 10 m and lift of 2 M in narrow trenches having bed width 1.25m & below for laying of pipes for water supply and sewerage works in the following type of soils as directed by Departmental officers. Sand, silt or other loose soil, wet sand or silt not under water light black cotton soil, sandy loam and ordinary soil.SS20B - WD-W0653

Charage incurred the B.T.Road cutting including cost and conveyuance charges to site etc., Complete as per Std Specification.WD-W0739

Charage incurred the C.C Road cutting including cost and conveyance charges to site etc., Complete as per Std Specification. WD-W0740

Supplying and conveying to site, the following sizes of PVC pipes 6ksc of confirming to IS:4985/2000, as specified in Technical Specifications in standard lengths including labour charges for loading, unloading and stacking at site and transportation charges etc., complete as per standard specifications and as directed by the Engineer in Charge 160mm dia PVC Pipe 6ksc - M-0873

140mm dia PVC Pipe 6ksc -WD-M0014

110mm dia PVC Pipe 6ksc - M-0872

90mm dia PVC Pipe 6ksc - M-0870

Supply,laying and jointing of following dia PVC/HDPE necessary specials.including all cost of materials,labours etc., complete as per standard specifications. 90mm HDPE Pipe Couling EF PN6

110mm HDPE Pipe Couling EF PN6

125mm HDPE Pipe Couling EF PN6

140mm HDPE Pipe Couling EF PN6

160mm HDPE Pipe Couling EF PN6

180mm HDPE Pipe Couling EF PN6

200mm HDPE Pipe Couling EF PN6

90mm HDPE Tee PN6 WD-M0285

110mm HDPE Tee PN6 WD-M0286

125mm HDPE Tee PN6 WD-M0287

140mm HDPE Tee PN6 WD-M0288

160mm HDPE Tee PN6 WD-M0289

180mm HDPE Tee PN6 WD-M0290

200mm HDPE Tee PN6 WD-M0291

90mm HDPE Tail piece long end PN6

110mm HDPE Tail piece long end PN6

125mm HDPE Tail piece long end PN6

140mm HDPE Tail piece long end PN6

160mm HDPE Tail piece long end PN6

180mm HDPE Tail piece long end PN6

200mm HDPE Tail piece long end PN6

3" MS flange ring for stubend

4" MS flange ring for stubend

5" MS flange ring for stubend

6" MS flange ring for stubend

7" MS flange ring for stubend

8" MS flange ring for stubend

10" MS flange ring for stubend

90mm HDPE Reducer Mould PN6

110mm HDPE Reducer Mould PN6

125mm HDPE Reducer Mould PN6

140mm HDPE Reducer Mould PN6

160mm HDPE Reducer Mould PN6

180mm HDPE Reducer Mould PN6

200mm HDPE Reducer Mould PN6

PVC Paste

Laying and jointing of PVC Pipes in to Trenches etc.,Complete as per Standard Specification. Up to 50-75mmǾPVC Pipe WD-W0424

Up to 90-110mmǾPVC Pipe WD-W0425

Up to 125-160mmǾPVC Pipe WD-W0426

Supply, erection, testing and commissioning of cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’, gaskets, bolts & nuts including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: NORMEX / KARTAR / EQUIVALENT 80mm CI Sluice valve - M-0814

100mm CI Sluice valve - M-0814

150mm CI Sluice valve - M-0814

200mm CI Sluice valve - M-0814

250mm CI Sluice valve - M-0814

Refilling the trenches with excavated earth (other than sand) in layers and watering, ramming and consolidation as per standard specification etc complete and as directed by Engineer in charge TWAD SR Pg no 190

Please Enable Macros to View BoQ information