Improvements and renovation of office of the Member of Parliament (Lok Sabha at Legislative Assembly Complex,

Amount

Supplying chemical emulsion in sealed containers including delivery as specified - Chlorpyriphos / Lindane emulsifiable concentrate of 20%.

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion): Along the external wall below concrete or masonry apron using chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. - With Chlorpyriphos / Lindane E.C. 20% with 1% concentration.

Diluting and injecting chemical emulsion for POST-CONSTRUCTIONAL anti-termite treatment (excluding the cost of chemical emulsion): Treatment of soil under existing floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1:2 (1 cement : 2 coarse sand) to match the existing floor : With Chlorpyriphos / Lindane E.C. 20% with 1% concentration.

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering.- All work upto plinth level -1:2:4 (1 cement: 2coarse sand : 4 graded stone aggregate 20mm nominal size)

Reinforced cement concrete work in beams , suspended floors, roofs having slope upto 15 degree landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering,finishing and reinforcement with 1:1.5:3 (1 cement :1.5 coarse sand : 3 graded stone aggregate 20mm nominal size).

Centring and shuttering including strutting, propping etc. and removal of form for: lintels, beams, plinth beams, girders, bressumers and cantilevers.- Using steel sheet with M.S.frames

Brick work with FPS bricks of class designation 35 in foundation and plinth in cement mortar 1:6 (1 cement : 6 coarse sand)

Brick work with FPS bricks of class designation 35 in superstructure above plinth level upto floor V level in all shapes and sizes in cement mortar 1:4 (1 cement: 4 coarse sand)

Half brick masonry with FPS bricks of class designation 35 in superstructure above plinth level upto floor V level in cement mortar 1:4 (1 cement: 4 coarse sand

Extra for providing and placing in position 2 nos. 6mm dia MS bars at every third course of half brick masonry (with FPS bricks).

Providing wood work in frames of doors, windows,clerestory windows and other frames, wrought framed and fixed in position - Burma teak wood

Providing and fixing panelled or panelled and glazed shutters for doors , windows and clerestory windows including ISI marked black enamelled M.S butt hinges with necessary screws excluding panelling which will be paid for separately. - Burma Teak wood - 35mm thick shutters.

Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25mm to 40mm thick: Burma teak wood.

Providing and fixing ISI marked flush door shutters conforming to IS:2202 (Part 1) decorative type, core of block board construction with frame of 1 st class hard wood and well matched teak 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters. 35mm thick including ISI marked stainless steel butt hinges with necessary screws.

Extra for providing lipping with teak wood battens 25mm minimum depth on all edges of shutters (over all area of door shutter to be measured) over item no.9.20 and 9.21

Extra for providing vision panel not exceeding 0.1 sqm in all type of flush doors (cost of glass excluded) (overall area of door shutter to be measured): Rectangular or square

Providing and fixing wooden moulded beading to door and window frames with iron screws , plugs and priming coat on unexposed surface etc.complete: Burma teak wood - 50x12 mm

Providing 40x5 mm flat iron hold fast 40cm long including fixing to frame with 10mm diameter bolts, nuts and wooden plugs and embedding in cement concrete block 30x10x15cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size)

Providing and fixing bright finished brass butt hinges with necessary screws etc.complete :-125x85x5.5mm (heavy type)

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc.complete : - 250x10mm

Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc.complete : - 150x10mm

Providing and fixing bright finished brass handles with screws etc.complete: 125mm

Providing and fixing bright finished brass hanging type floor stopper with necessary screws, etc.complete

Providing and fixing IS:3564 make aluminium extruded section body tubular type universal hydraulic door closer with double speed adjustment with necessary accessories and screws etc.complete

Providing and fixing chromium plated brass 100 mm mortice latch and lock with 6 levers and a pair of lever handles with necessary screws etc.complete (best make of approved quality)

Providing and fixing factory made UPVC door frame made of UPVC extruded, section having an overall dimension , as below (tolerance +/- 1mm) with wall thickness 2.0mm +/- 02mm . Corners of the door frame to be jointed with galvanized brackets and stainless steel screws, joint mitred and plastic wilded . The hinge side vertical of the frames reinforced by galvanized M.S.tube of size 19x19mm and 1 mm +/-0.1mm wall thickness and 3 nos.stainless steel hinges fixed to the frame complete as manufacturers specification - Extruded section Profile size 42x50mm.

Providing and fixing 1st quallity ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacture of approved make (Jhonson / Asian / Somany / Nitco) in all colours, shades of size 300 x 450 mm as approved in skirting, risers of steps and dados over 12mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm. Including pointing in white cement mixed with pigment of matching shade complete. - size 300x450mm

Providing and laying ceramic glazed floor tiles 300X300mm (thickness to be specified by the manufacture) of 1st quality conforming to IS : 15622 of approved make (Bell / Johnson / Regency / Somany / Naveen / Asian ) in colours such as white, ivory, grey, fume red, brown laid on 20mm thick cement mortar 1:4(1 cement : 4 Coarse sand) including pointing the joints with white cement and matching pigment etc., complete

Providing and laying fully vitrified floor tiles of size 60x60cm (thicknes to be specified by the manufacturer) with water absorption's less than 0.08% and conforming to IS: 15622 of approved make (Nitco / Rak / Johnson / Asian) in all colors and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand) including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600mm.

Providing and fixing PVC corner beading of required size to suit the thickness of the wall tile at the corner joints of dado works

Providing and fixing on wall face unplasticised-PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Single Tee with door 110X110X110mm.

Providing and fixing on wall face unplasticised- PVC moulded fittings / accessories for unplasticised rigid PVC rain water pipes conforming to IS : 13592 type A including jointing with seal ring conforming to IS : 5382 leaving 10mm gap for thermal expansion. Bend 87.5deg. 110mm bend

Providing and fixing at all height false ceiling including providing and fixing of frame work made of special sections power pressed from M.S. sheet and galvanised in accordance with zinc coating of grade 350 as per IS :277 and consisting of angle cleats of size 25mm wide X 1.6mm thick with flanges of 22mm and 37mm at 1200mm centre to centre one flange fixed to ceiling with dash fastener 12.5mm dia X 40mm long with 6mm dia bolts to the angle hangers of 25X25X0.55mm of required length, and other end of angle hanger being fixed with nut and bolts to the G.I. channels 45X15X0.9mm running at the rate of 1200mm centre to centre to which the ceiling section 0.5mm thick bottom wedge of 80mm with tappered flanges of 26mm each having clips of 10.5mm at 450mm centre to centre shall be fixed in a direction perpendicular to G.I. channel with connecting clips made out of 2.64mm dia X 230mm long G.I. wire at every junction including fixing the gypsum board with ceiling section and perimeter channels 0.5mm thick 27mm high having flanges of 20mm and 30mm long, the perimeter of ceiling fixed to wall / partition with the help of rawl plugs at 450mm centre to centre with 25mm long drive-all screws @ 230mm interval including jointing and fixing to a flush finish of taper ed and square edges of the board with recommended filler, jointing tapes, finisher and two coats of primer suitable for board as per manufactures specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitable fixed all complete as per drawing and specification but excluding the cost of painting with : 12.5mm thick tapered edge gypsym board conforming to IS: 2095 - part I,

Supply and installation of precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved) 0.50mm +/- 5% total coated thickness (TCT) thick Zinc coating 120 gsm as per IS:277 in 240 mpa steel grade , 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns mimimum to avoid scratches while transportation and should be supplied in single length upto 12 metre or as desired. The sheet shall be fixed using self drilling / self tapping screws of size (5.5x55mm) with EPDM seal or with polymer coated J or L hooks ,bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead complete upto any pitch in horizontal / vertical or curved surfaces excluding the cost of purlins , rafters and trusses and including cutting to size and shape wherever required.

Providing and fixing precoated galvanised steel sheet roofing accessories 0.50mm + or- 5% total coated thickness (TCT), zinc coating 120 gsm asper IS:277 in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling /self tapping screws or with polymer coated J or L hooks, bolts and nuts and or G I seam bolts and nuts, G I plain and bitumen washers complete: Crimp curve.

12mm cement plaster of mix :Cement mortar 1:4 (1 cement : 4 fine sand)

Providing and applying ready mixed wall putty (JK / BIRLA ) of 2mm thickness over plastered surface to prepare the surface even and smooth complete

Applying one coat of cement primer of approved brand and manufacture on wall surface - Cement primer

Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade - One or more coats on old work.

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade - One or more coats on old work.

Demolishing brick work, manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead - In cement mortar.

Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 m lead - Of area 3 sq. metres and below.

Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50m lead - For thickness of tiles above 10mm and upto 25mm.

Dismantling roofing including ridges, hips valleys and gutters etc. and stacking the material within 50m lead of - Asbestos Sheet

Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50m lead.

Supply and fixing of sliding windows at all levels made out from Unplasticised Poly vinyl chloride frame (UPVC) of natural colour (PRISTINE WHITE) with outer frame of size 40x56x40mm /102x56x40mm and for shutter frame of size 53x38x37mm for two track / three track sliding windows , with wall thickness of 1.8mm (+/-0.3mm).The section should be single glazing using (flush catch) single point locking. The gasket should be made of EPDM (Ethylene propylene dimonomer) and applying silicone sealants (GE make or wacker make) outside and acrylic sealent inside including single glazing of 5mm thick clear float glass. The sections should be reinforced with GI sheet of 1.5mm thick with suitable drainage grouting.

Providing and fixing white vitreous china pedestal type water closet (European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern with manually controlled device (handle lever, conforming to IS: 7231, with all fittings and fixtures complete) including cutting and making good the walls and floors wherever required.W.C pan with ISI marked white solid plastic seat and lid.

Providing and fixing wash basin with CI brackets, 15mm CP brass pillar taps 32 mm CP brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls wherever required White vitreous china wash basin size 630x450mm with a single 15mm CP brass pillar taps.

Providing and fixing wash basin with CI brackets, 15mm CP brass pillar taps 32 mm CP brass waste of standard pattern including painting of fittings and brackets, cutting and making good the walls wherever required White vitreous china flat back wash basin size 550x400mm with single 15mm CP brass pillar taps.

Providing and fixing stainless steel AISI 304 (18/8) Kitchen sink as per Is 13983 with CI brackets and stainless steel plug 40mm including painting of fittings and brackets, cutting and making good the walls wherever required - Kitchen sink without drain board - 610x460 mm bowl depth 200mm.

Providing and fixing 600x450mm bevelled edge mirror of superior glass (of approved quality) complete with 6mm thick hard board ground fixed to wooden cleats with C.P brass screws and washers complete.

Providing and fixing PTMT towel ring trapezoidal shape 215mm long, 200mm wide with a minimum distance of 37mm from wall face with concealed fittings arrangement of approved quality and colours weighing not less than 80 gms.

Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour 600mm long towel rail with total length of 645mm, width 78mm and effective height of 88mm, weighing not less than 190 gm.

Providing and fixing CP brass health faucet of approved quality - 15mm nominal bore

Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings this included jointing of pipes & fittings with one step CPVC solvent cement, trenching refilling & testing of joints complete (External work) - 20mm nominal outer dia pipes.

Providing and fixing CP brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms - 15mm nominal bore.

Providing and fixing CP brass angle valve for basin mixer and geyser points of approved quality conforming to IS 8931 - 15 mm nominal bore.

Providing and fixing unplastisised PVC connection pipe with PTMT nuts of approved quality and colour 15 mm nominal bore with 45 cm length.

Providing and fixing aluminimum work for doors, windows, ventilators and partitions with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS : 733 and IS : 1285, fixed with rawl plugs and screws or with fixing clips, or with expansion hold fasteners including necessary filling up of gaps at junctions, at top, bottom and sides with required PVC /neoprene felt etc. Aluminimum sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminimum snap beading for glazing /panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings. (Glazing and panelling to be paid for separately) : For fixed portion. Anodised aluminimum (anodised transparent or dyed to required shade according to IS : 1868, Minimum anodic coating of grade AC 15)

Providing and fixing Anodised aluminium , minimum anodic coating of grade AC 15 grill of required pattern /design over the doors, windows and ventilators., etc, including fixing (but excluding the cost of the sections, which will be paid separately)

Providing, laying and jointing UPVC pipes(Finolex/Jain) (1 Mpa) conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,UPVC specials such as bends,tees, threaded pieces, couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. - 75mm dia.

Providing, laying and jointing UPVC pipes(Finolex/Jain) (0.6 Mpa)conforming to IS specification 4985 and ISI marked including transportation to the site , lowering to the trenches, laying to proper grade and alignment, testing of joints with required testing equipment,including cost of solvent cement,excluding UPVC specials such as bends,tees threaded pieces,couplers,reducer,endcaps etc.,complete all as per IS and CPWD specification. - 110mm dia.

Providing and fixing in position UPVC moulded equal Tee (Finolex/Jain)(1 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 75mm dia

Providing and fixing in position UPVC moulded equal Tee (Finolex/Jain)(1 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 110mm dia

Providing and fixing in position UPVC moulded elbow (Finolex/Jain)(1 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 75mm dia

Providing and fixing in position UPVC moulded elbow (Finolex/ Jain)(1 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 110mm dia

Providing and fixing in position UPVC fabricated bend (Finolex/Jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 75 mm dia

Providing and fixing in position UPVC fabricated bend (Finolex/ Jain)(0.6 Mpa) conforming to IS 7834 part II and ISI marked,including labour charges for jointing, jointing materials etc,complete - 110 mm dia

Providing two legged scaffolding using 15 cm diameter blue-gum posts or casurinaposts or best quality bamboo posts of 4mover all length (3.0m heigh + 0.5m projection + 0.5 into the ground ) the distance between the two rows being 1.25m and the spacing of posts with 0.5m overlap on either side and braces to step up and providing a platform with country wood planks of 40mm thick and 1m width etc in a complete form using coir and nails 1m run (Rate of scaffolding for a height of 3m and length of 1m)

Plastering the wall surface with Cement Mortar of mix 1:4 (One part of cement : 4 fine sand) mixed with polymer SETCRETE SBR at the rate of 1Kg. For 1 bag of cement including applying a priming coat with setcrete SBR at 0.27Kg. per Sqm of treatment area as per the specification of M/s Don chemicals India Ltd. including all lead and lift etc.,. Complete as directed by the Engineer-in-charge.

Removing the existing colour wash by using scrapping machine, wirew brush and other proper tools in Lawspet quarters upto five level to ensure the surface free from loose particles, deposits, duct etc., complete as directed by the Engineer- In-charge.

Providing and fixing designed teak wood (Burma) dimension hand curved show beading to false ceiling and wall paneling with MS screws including polishing the beading with melamine polish two coats at Legislstive Assembly complex building. The rate shall include the cost of teak wood beading, all other materials, labour charges, transportation etc ., complete as directed by the Engineer- in-charge. size 70x10mm.

Providing and fixing bright finished brass Godrej Ulta Mortice latch and lock 200mm with one dead bolt, brass handle set, ultra cylinder and ultra keys (code No.5445 LKXUDM 117) withe necessary screws etc., complete as directed by the Engineer-in-charge.

Providing and fixing CP brass shower arm (make Jaquar - model No.SHA477) 300mm long . The rate is inclusive of VAT @ 3.5% and all other applicable taxes.

Providing and fixing CP brass shower dome (Make Jaquar model No. GHS 1995) - 150mm dia. The rate is inclusive of VAT @ 3.5% and all other applicable taxes.

Providing and fixing CP brass soap dish (Jaquar 1131) of approved quality. The rate including VAT @ 3.5%

Providing and fixing white vitreous china pedestal type water closet (European type) (model: JAQUAR OPULA single piece suite white) complete including painting of fittings and brackets, cutting and making good the walls wherever required. The rate is inclusive of VAT3.5% and all other applicable taxes etc., complete.

Providing and fixing CP brass 2 in 1 wall mixer tap of approved quality conforming to IS standards - 15mm nominal bore.

Providing and fixing PVC 110mm dia terminal guard vent cowl etc. complete as directed by the Engineer-in-charge.

Providing and fixing cement bonded particle board of make Bison with necessary screws, etc., complete over the frame work (frame work to be paid separately) for wall paneling work - 8mm thick etc., complete as directed by the Engineer-in-charge.

Supplying and fixing 100% vinyl non-woven wall papers of required pattern/design with standard thickness (make Miranda –code No.4238-6 for bottom and 35267 -4 for top). The rate includes cost of wall paper, adhesive materials and fixing charges. The rate is inclusive ov VAT @ 3.5% and all other applicable taxes.

Providing and fixing brass wheel valve 20mm dia of approved quality including fixing charges etc. complete as directed by the Engineer in-charge.

Providing and fixing stainless steel jali grating with or without hole for waste pipe for floor level of size 125 x 125 mm and weight 118 gm.

Providing and laying 45x45cm grey granite slab of thickness 3cm in the pavement stop surfaces flame finished with neat edges, 1cm wide reaccessed cement pointing 1:2, laid over 2cm thick cement mortar.

Providing and fixing architecturally Designed false ceiling works using superior fire rated St. Gobain make gypsum board of 12.5mm tk mounted on GI frame work with ceiling section of size 80x26x0.55x3660 mm spacing at 600mm c/c suspended from ceiling using hanger rods at 1200mm c/c with screw to level and line and applying one coat of primer , two coats of putty followed by and reflective paint in front of the stage area to the required shape and size,including scaffolding etc. complete as directed by the Engineer -in-charge upto 6.5m height.

Providing and fixingPVC trap grating with or without vent complete including providing necessary lubricant and slip ring for fixing fittings cost cutting and making good the walls and floors - 110mm inner and 110mm outer etc., complete as directed by the Engineer-in-charge.

Providing and fixing designed teak wood (Burma) dimensional corner type show beading for false ceiling with MS screws including polishing the beading with French spirit polishing of two or more coats with a base coat of wood sealer. The rate shall include the cost of wood beading, all other materials, labour charges, transportation charges etc., complete – as directed by the Engineer-in-charge – 70 x 45mm.

Providing and fixing designed teak wood (Burma) dimensional corner type show beading for false ceiling with MS screws including polishing the beading with French spirit polishing of two or more coats with a base coat of wood sealer. The rate shall include the cost of wood beading, all other materials, labour charges, transportation charges etc., complete – as directed by the Engineer-in-charge – 40 x 35mm.