SPL REPAIR TO BLDG NO D-44 (SINGLE OFFRS LIVING) AT 56 ENGR REGT UNDER GE SAUGOR

Taking down chowkhat or frame (without taking off shutter from the frame) not exceeding 1.5 Square Metre each , removing from the site including Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed. Note:- Quoted rates includes dismantling of brick/stone/concrete work (embeded portion of hold fast) to facilitate the taking down of chowkhat/frame (if required) or any other arrangement for fixing frame/chowkhat and making good the dismantled portion with PCC (1:2:4) type B-1 or CM (1:4) as required complete all as specified and directed.

Taking down chowkhat or frame (without taking off shutter from the frame) exceeding 1.5 sqm and not exc 4.00 sqm each , removing from the site Including Cutting holes exc 150 Sq.cm but n.exc 400 Sq.cm in super facia area into or through brick walls built in cement mortar and making good in cement mortar 1:3 or cement concrete 1:2:4 type B-l as required complete all as specified and directed. Note:- Quoted rates includes dismantling of brick/stone/concrete work (embeded portion of hold fast) to facilitate the taking down of chowkhat/frame (if required) or any other arrangement for fixing frame/chowkhat and making good the dismantled portion with PCC (1:2:4) type B-1 or CM (1:4) as required complete all as specified and directed.

M&L for mild steel door shutter with MS angle iron shutters frame 35 mm X 35 mm X 5 mm in two panel covered with 1.25 mm thick MS plain black sheet welded to shutter with 2 Nos sliding door bolt of 16 mm dia 300 mm long with locking arrangement, 2 Nos of tower bolt of 200 mm longincluding MS angle iron frame 40 mm x40 mmx 5 mm as in chowkhat with 6 Nos hold fast of flat iron 30mm X5 mm ,200 mm long with bottom flat iron of size 30mmx5mm,diagonally bracing of 30 mmX5 mm and 100 mm size 4 Nos butt hinges including necessary cutting, welding, binding as required with two coats of synthetic enamel paint over a coat of red oxide primer including preparation of new steel surfaces complete all as specified and directed. [Single shutters of approx width 0.7 to 1.2 m and height 1.9 to 2.10 M.]

M&L for mild steel framed work such as grills gratings, sunshed cover fixed with nut bolts incl,cutting drilling holes etc., with ends of bars shouldered and/ or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed baluster, walk ways, railings, framedwork or water tanks and similar work conforming to Fe 290 Gde E 165 complete all as specified and directed.

M&L for steel work in tubular trusses/purlins/posts (of round/rectangula/square hollow section) including angle cleats for jointing with welding confirming to IS.1161- 1979 grade St.-240, complete all as specified and directed

S&F pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick, trapozoidal pattern with guard film of any colour having tensile strength of 550 Mpa as in roof covering/cladding in wall, fixed with self tapping screws including dismantling old plain or corrugated asbestos sheeting , any gauge, thickness complete all as specified and directed.

S&F Solid PVC door frame of size 50mmX47mm made out of 5mm single side prelam PVC sheet used instead of plain colour PVC sheet (edges will be painted to match with prelam sheet) reinforced with MS square tube, suppling & fixing in opening as per specification.

S&F factory made solid PVC moulded door shutter with wood free EPS, 28 to 30mm thick (stiles), with 2, 4, or 6mm raised panel design with 5 mm thick moulded PVC sheet on the front face & 5mm prelam PVC sheet on back face, supplying & fixing in frame at site complete all as specified and directed.

S&F fixed type ventilators aluminium powder coated of frame size 50.80X 25.40mm,1.5 mm thick half portion will be fixed with 4mm thick frosted glass and half portion will be fixed with louvers with 4mm thick frosted glass with rubber gasket and aluminium beading ,aluminium wire mess 0.36 mm dia and width of aperture 1.45mm to be fixed over louvers portion only including necessary cutting holes on wall and fixing arrangements complete all as specified and directed. (Al. section thickness 1.50 mm }

S&F aluminium windows sliding type three track powder coated consisting of frame bottom with gutter of size min 92.34 X 31 mm,sideand top of size min 92.34X29.70, shutters vertical 39X18 mm,shutter top & bottom of size min 18X39 mm ,shutter interlock min size 39X18 mm with rollers and conceled locking arrangements with 4 mm thick tinted glass with rubber gasket,brush and aluminium beading ,aluminium wire mess 0.36 mm dia and width of aperture 1.45 mm etc including necessary cutting holes on wall and floor and confirming to IS complete all as specified and directed. (Al. section thickness 1.50 mm }

S&F 105 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including M&L PCC 1:3:6 type C-0 using 12.5 mm graded store aggregate for filling in pressed steel frame complete all as specified and directed.

S&F 125 mm X 60 mm size pressed steel frames for door with one or more rebates including necessary supply and fixing lugs, hinges, lock strike plate etc including one shop coat of red oxide primer including M&L PCC 1:3:6 type C-0 using 12.5 mm graded store aggregate for filling in pressed steel frame complete all as specified and as directed

M&L second class hardwood in scantlings , timber clean sawn framed and fixed including dismantling unframed timber scantlings 40 sq. cm & over in section, in any position. .including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F 30 mm thick flush shutters, solid core construction, with block board core and plywood facepanels, commercial type on both sides, complete all as specified and directed.

S&F 2nd class HW factory made glazed and skeleton shutters 35 mm thick open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chemfered or rounded, fitted with cut and mitred beads for securing glass, etc.; sizes of members of shutters as specified in SSR Part-I, Section 8, cla-use 8.24 (a); for doors supplied and fitted to chowkats including preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F for Extruded aluminium alloy handle of 150 mm size fabricated type, anodised complete all as specified and directed.

S&F for aluminium anodised barrel tower bolt of 150mm of extruded section complete all as specified and directed.

S&F for Extruded aluminium alloy handle of 125 mm size fabricated type, anodised complete all as specified and directed.

S&F for aluminium anodised barrel tower bolt of 125 mm of extruded section complete all as specified and directed.

S&F 100mm Butt hinges, extruded aluminium aloy with galvanised mild steel hinge pin, anodised and fixed complete all as specified and directed.

S & F door stopper of aluminium alloy body and tongue 150 mm long , anodised fixed in door with screws etc complete all as specified and directed.

S&F 150 mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and directed.

S&F Aluminiumy alloy, anodised, sliding door bolts 300mm length ,with hasp staple (16 mm dia bolt type )and fixing clip of sheet cast or extructed sections and fixing bolt and sliding bolts of extructed sections or cast aluminium alloy and fixed, complete all as specified and directed.

M&L for preparation of new steel surfaces of any description over 10 cm width or girth and applying two coats of synthetic enameled paint over a coat of red oxide complete all as specified and directed.

S&F galvanised mild steel wire cloth, 0.36 mm nominal dia of wire and average width of aperture 1.45mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed.

Taking down cement plaster on brick work or stone walls, etc incl raking out joints, hacking for key, scrubbing down with water, etc complete all as specified and directed.

M&L two coat cement plaster on brick / concrete/ stone surfaces ,first coat 15mm thick CM 1:6 and second coat cement plaster 5mm thick in CM 1:4 with WPC finished even and fair without using extra cement complete all as specified and directed. Note:-WPC will be paid seperately under respective item.

M&L for 15 mm thick rendering in cement mortar (1:6) on brick / concrete/ stone surfaces finished even and fair without using extra cement with including taking down of existing cement or cement lime plaster complete all as specified and directed.

M&L for rendering 5 mm thick in Cement Mortar (1:3) on ceiling finished even and smooth without using extra cement with including taking down of existing cement or cement lime plaster complete all as specified and directed.

M &L for Brickwork with subclass 'B' bricks, straright or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

M&L for Brick work with old size subclass 'B' bricks, straight or curved on plan in half brick thick wall built in CM 1:4 complete all as specified and directed.

Demolition of brickwork or rubbled stone masonery including all qions arches , Pillars etc built in Lime mortar

M&L for preparation of the newly plastered surfaces of wall & applying 3 coats of white wash on wall surfaces complete all as specified and directed.

M&L for water based premium acrylic smooth exterior emulsion of approved colour with silicon additive excellent dirt pickup resistance with low VOC less than 50, Antifungal/ Anti Algai properties in two coats not less than 1.79 litre(undiluted)/10 Sqm diluted with water as per manufacturer's instruction over and including one coat of exterior primer over and including 1mm thick wall care putty on new plastered surface complete all as specified and directed.

M & L for two coat of acrylic emulsion paint over a coat of 1mm thick Birla /J K wall care putty on new plastered surfaces on wall incl. preparation of surfaces complete all as specified and directed.

M&L for preparation of the newly plastered surfaces of ceiling & applying 3 coats of white wash on ceiling surfaces complete all as specified and directed.

M&L for Two coat of white wash on old decorated surface of ceiling including preparation of old surface i.e brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , craks etc and washing floors, cleaning glass , joinery , electric fitting, etc complete all as specified and directed.

M&L for Two coat of white wash on old decorated surface of walls including preparation of old surface i.e brooming down with steel wire brushes scraping down moulds moss and efflorescent salts and treating oil and greasy spots, removing of nails, making good holes , craks etc and washing floors, cleaning glass , joinery , electric fitting, etc complete all as specified and directed.

M&L for complete removal of existing treatment and applying Birla / J. K. wall care white putty 1mm thick in two layers for levelling the surfaces of walls and applying two coat of acrylic emulsion over and including a coat of interior primer incl. preparation of surfaces of walls complete all as specified and directed.

Complete removal of existing treatment and applied for water based premium acrylic smooth exterior emulsion of approved colour with silicon additive excellent dirt pickup resistance with low VOC less than 50, Antifungal/ Anti Algai properties in two coats not less than 1.79 litre(undiluted)/10 Sqm diluted with water as per manufacturer's instruction over and including one coat of exterior primer over and including 1mm thick wall care putty on old plastered surface complete all as specified and directed.

S&F in repair 25mm dia stainless steel curtain rod not less than 0.70mm thick including fixing of sufficient brackets ( minium 2 nos at every 1.50m length) & end Knobs complete all as specified and directed.

S&F GI tubing 15 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 15 mm dia GI tubing and connections complete all as specified and directed

S&F 20 mm outer dia of CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors incl fittings and the holes in walls and floors shall be made by drilling with drill or jumper and not by dismantling the brick/concrete. After fixing holes shall be made good with CM 1:3 properly including taking down 15 mm dia GI tubing and connections complete all as specified and directed.

S&F GI tubing 20 mm bore medium grade with all fittings fixed to walls and ceilings or laid in floors including taking down 20mm dia GI tubing and connections complete all as specified and directed

Cutting chases, pinning in, in brick wall making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc. and cutting chases for concealed water tubing or concealed conduit wiring etc. and making good, in cement mortor 1:3 cutting not exceeding 10cm girth complete all as specified and directed.

S&F in repair for 110mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and directed.

S&F in repair for 75/90 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,fixed to walls complete all as specified and directed.

S&F in repair for 75/90 mm dia PVC(SWR) pipes single socketed, in any length with rubber ring joints,laid in trenches or in floors complete all as specified and directed.

S&F in repair for 110mm dia PVC(SWR)pipes bends any radious complete all as specified and directed.

S&F in reapir for 75 /90 mm dia PVC(SWR)pipes bends any radious complete all as specified and directed.

S&F in reapir for 110mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious.with acces door, complete all as specified and directed.

S&F in reapir for 75 to 90 mm dia PVC(SWR)pipes junction,single (single T/Y ) equal or unequal any radious.with acces door, complete all as specified and directed.

S&F in reapir for 110mm dia PVC(SWR) vent cowl, complete all as specified and directed.

S&F in repair for 75 mm dia of out let PVC (SWR) floor trap plain with CP grating including jointing with solvent cement complete all as specified and directed.

S&F in repair 15mm angle cock fancy type chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed.

S&F in repair 15mm ,bib tap Fancy type long body chromium plated,cast copper alloy, with brass ceramic disc spindle and capston heads,scewed down high pressure, with or without lettered 'hot' or Cold' with long srewed shanks and flynuts, srewed for iron pipe complete all as specified and directed.

S&F in repair shower rose brass chromium plated without swivel joints, 100 mm in size including fixing to steel pipe complete all as specified and directed.

S&F in repair Brass CP WHB mixer fancy type for mixing hot & cold water screwed down for 15mm bore iron pipe complete all as specified and directed.

S&F Brass Bottle Trap for wash basin connected from wash basin coupling complete all as specified and directed.

S&F Single lever concealed high flow diverter ( 46 mm ) bath & shower ( forged Body) ( internal concealed body, upper external part plate & handle ) along with all accessories complete all as specified and directed

S&F Bath tub Spout with flange along with all accessories for connecting in diverter complete all as specified and directed

S&F in repair Soap dish of CP fixed with pvc rawal plugs and screw, complete all as specified and directed.

S&F in repair CP tubular towel rail D type 20mm dia and 60cm long complete all as specified and directed.

S&F peg set of six S.S. fixed to wall with PVC plugs and screw, complete all as specified and directed.

Supply only 15mm dia PVC connection with PTMT nuts of length 450 mm, complete all as specified and directed.

S & F rotational moulded poly-ethylene multilayer water storage tanks (cylinderical vertical with closed top) 500 litres capacity, triple layer in construction white in colour hoisted and fixed in position including dismantaling of old tank complete all as specified and directed.

S&F PVC float valve assembly including assessories with float valve 20mm dia complete all as specified and directed.

S&F in repair gun metal globe /valve with iron wheel head screwed both ends for iron pipe of 20mm bore, complete all as specified and directed.

S&F in repair Vitreous China wash down water closet pan (pedestal pattern), white including white seat cover complete all as specified and directed.

S&F vitreous china wash basin, white, table Top of minimum size 400mmx400mmx125mm , as approved by Engineer In charge Including waste coupling , and labour for fixing mixer ,pvc connection but including cutting for and pinning in ends of and including brackets complete all as specified and directed. . Note : Pillar tap and PVC connection will be measured paid separetly.

S&F in repair PVC valveless syphonic action dual flush type (5/10 ltr) flushing cistern low level white with inlet ball valve,float end handle handle including bracket complete of capacity 10 litres, complete all as specified and directed.

Dismantiling of stone slabs and tiles (Kota stone etc.) of any discription or any thickness in floors, aprons, skirting, dado etc. laid bedded and pointed in any mortar complete all as specified and directed.

Dismantling floor, hearth or wall tiling of any description and in any position including cement mortar bedding (but not backing) complete all as specified and directed.

Roughning sufaces of old concrete floor by picking , sweeping cleaning and washing down with water to remove dust etc. Complete all as specified and directed

M&L for light shade Vitrified ceramic tiles 10 mm thick (Square or Rectangular) polished , area of each tiles n, exceeding 0.36 sqm in floors etc over 15 mm thick sreed in Cm (1:6) bed,set and jointed cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

S&F light shade Vetrified Ceramic tiles 10mm thick (square/rectangular) polished, area of each tiles not exceeding 0.36 sqm, as in skirting etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match.including screed bed or bed including Rendering 10mm thick on fair faces of brick work or concrete surfaces in CM (1:4) complete all as specified and directed.

M&L for non skid ceramic tiles, joint free, coloured tiles 7mm to 8 mm thick (Square or rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc set over and including 15 mm thick cement screed in (1:6) CM set and jointed in neat cement slurry and pointed in white or coloured cement to match with the colour of tiles complete all as specified and directed.

M & L for coloured designer tiles exterior grade ( ENDURA OR Equivalent ) 9-10 mm thick over and including 15 mm thick cement mortor 1:6 set and jointed in floor and pointed in neat cement slurry with grey cement and pigment in floor etc. complete all as specified and directed.

M&L for digital glazed ceramic tiles, coloured tiles 300mm x 600mm x 7mm thick on vertical faces ie. as in skirting/dado etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles fix over and including 15 mm thick backing coat in cement mortar (1:4) complete all as specified and directed.

M&L for mirror polished/prepolished Machine cut kota stone single piece slab as in steps tread,windows cill,18-20 mm thick ,over and including 15 mm thick screed in CM(1:4) laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing , polishing and rounding the edges complete all as specified and directed.

M&L Kota stone slab 12-15 mm thick prepolished/mirror polished in skirting, steps riser etc over and including 10mm thick plater in CM (1:4) & jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing & polishing complete all as specified and directed.

M&L cement concrete 1 : 3 :6 type C-2 using 40mm graded stone aggregate as in plinth protection 75mm thick finishing cement concrete surfaces even & smooth without using extra cement including filling of construction joint with bitumenous sealing compound.

Demolition of cement concrete in ground floors and pavings n exc 15cm below or above ground floor.

M & L PCC (1:2:4) Type B0 using 12.5 mm graded stone aggregate as levelling course/mass concrete complete all as specified and directed.

M&L for plain Cement concrete 75 mm thick ,type D2, 1:4:8 using 40mm graded stone aggregate complete all as specified and directed.

Demolition of RCC in any thicknes (reinforced cut as required to facilitate demolition ) complete all as specified and directed.

S&F for Mild steel TMT bars 10mm dia, and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips quality complete all as specified and directed.

S&F for Mild steel TMT bars 6mm to 8 mm dia cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mmdia or securing with clips quality complete all as specified and directed.

M&L reinforced cement concrete type B1 (1:1.5:3) using 20 mm graded aggregate slab support on walls beams and columns in floors , roofs , landing balconies deck slab etc complete all as specified and directed.

M&L use and waste formwork to soffits of suspended slabs such as roof slabs , floor slabs , landings and similar works , not exceeding 200 mm thick ( horizontal or sloping ) including slab edges for rough finished surfaces of concrete complete all as specified and directed

S&F in repair 18 mm thick marine plywood interior grade with 1 mm thick white mica lamination on one side and 1 mm thick coloured mica on another side fixed in as cubboard shutter and kitchen cabinet complete all as specified and directed.

M&L for external teak wood for plywood for external teak wood lipping, 6mm thick, fixed with nails for 18/19mm thick marine plywood boards including preparation and policing complete all as specified and directed.

S&F for aluminium anodised barrel tower bolts of extruded section of 100mm size, complete all as specified and directed.

S&F for continuous (piano) hinges mild steel bright finish or electro galvanised width of width of flaps nexc 30 mm (when open), complete all as specified and directed.

S&F for extruded aluminium alloy handle of 100 mm size fabricated type, anodised.complete all as specified .

S&F for Hasp and staple safety type Aluminium anodised with MS hinge pin including bolt to hinge pin of 100 mm size sixed with screw complete all as specified .

S&F for magnate catcher of metal body and striking plate heavy duty includind fixed with screw, complete all as specified and directed.

M&L for provn of water proofing roof treatment to RCC roof with approved modified membrane of weighing not less than 3 kg/sqm comprising with following items and all as specified:- (i).The surface of roof,parpet and gutters drain mouths etc over which water proofing treatment is to be applied shall be cleaned of all foreign matter such as fungus,mass dust etc by wire brushing and dusting. For cast iron drain outlets a groove shall be cut as specified and directed. (ii).Oil based Bitumen primer conforming to IS-3384-1986 @ 0.3 kgs per sqm to be applied on prepared surface till the surface is properly impregnated. (iii).Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm (iv).Laying of water proofing teratment of weight not less than 3 Kg / sqm APP modified polymeric water proofing membrane composed of 100 micron (±10% ) high density polyethylene sheet ( HMHDPE) as center core, which is standwiched between high quality polymeric bitumen mix having softening , high heat resistance and cold flexible protected on either side with a thin thermo fusible HMHDPE film with side and laps 75 mm and 100 mm as per manufacture instruction etc. (v).Applying one coat of hot blown grade bitumen 85/25 grade @ 1.20 kg/Sqm over the membrane (vi).Applying aluminium paint in two coat @ 100 gm/sqm in each coat on finished membrane surfaces complete all as specified and directed at site . (vii) A fillet of PCC (1:2:4) of 100x100mm shall be provided at all junctions of vertical and horizontal surfaces and wherever there is a change of dirction. The membrane should not be taken over at any steep turns and hence all corners/timers should be rounded.

M & L for PCC ( 1: 2: 4) type B-0 using (12.5mm graded stone aggregate) etc on roof top as a leveling course / padding to maintain the slope,finished the surfaces even and smooth without using extra cement etc.

Taking down of old roof treatment of any description including mud phushka, lime, concrete,tiles , cement plaster, padding upto 30cm depth from roof surfaces etc including cleaning, brushing and watering to joints and grooves and throwing the same to a distance exc 250 mtr and n exc 500 mtr from the roof of height 3 to 9 m height etc .

Supplying only liquid waterproofing compound

M&L rendering 10mm thick in cement mortar 1:4 mixed with and including water proofing compound @ 200ml per 50 kg bag of cement applied over roof slab ,complete all as specified and directed. Note : Water roofing comound shall be measured and Paid seperately

S&F anodised aluminium door shutters, aluminium section weighing 0.55 kg/m including necessary joining cleats, glazing clips, ruber neoprene packing, handles 2 Nos in each door, hinges, anodised aluminum snap beading screws etc.complete all as specified and directed.

S&F anodised aluminium frame for doors, windows, ventilators with one or more rebates including joining cleat for fixing etc. complete all as specified and directed

S&F door closer hydraulically regulated, designation No. 3, universal type, aluminium die-cast body (ISI Marked), suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed in repair complete all as specified

M&L for preparation of new wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

M&L for 4 mm high Quality Veneer sheet for decoration of door shutters including adhesive complete all as specified and directed

Demolition of cement concrete in any description and any position not otherwise specially provided complete all as specified and directed

M&L Plain cement concrete (1:4:8) type D2 (using 40 mm graded stone aggregate) as in foundations / mass concrete complete all as specified.

Material and labour in repair providing and laying 60mm thick factory made chamfered edge cement concrete paver block of M-35 grade chemically treated with aproved colour, design & pattern as in foothpath, parks, lawns, drive ways or light traffic parking etc. of required strenght, thickness & size / shape, , laid in required colour & pattern over and including 30 to 50 mm thick uniformly levelled surface of stone dust cushioning, , filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra cement including dismantling of old unserviceable tile complete all as specified and directed.

M&L Plain cement concrete (1:3:6) type B1 (using 12.5 mm graded stone aggregate) in Kerbs/Copings/bed plates and the like includins weathering slightly, rounded or chemfered angles and throating as directed including use of necessary formwork complete all as specified.

M& L for Hardcore of gauge n.exc 63 mm, with broken stone or boulderes deposited, spread and levelled in layers n.exc. 15 Cm thick, watered and rammed to a true surface complete all as specified & directed.

Moorum/red bajri filling in floors or pavings laid in layers n.exc 15cm thick spread levelled and rammed including watering

Taking down carefully copper/aluminum pt wiring (light fan, socket or power) complete including fittings such as switches, sockets, c/roses, lamp holders, tube light fittings, sketch fittings, wooden boards, bell push, call bell, MCBs & regulators etc & making good to disturbed surfaces & matching with the existing colour of wall/floor etc complete all as specified and directed.

M&L for concealed point wiring for one light point or fan point controlled by one switch with 1.5 Sqmm PVC insulated FRLSH, unsheathed, copper conductor (stranded) 1100 volt wiring cable in & including ISI marked PVC conduit of size not less than 20mm, ivory/white in colour with all accessories (such as tee, bend, joint cover etc) including suitable size modular metal boxes with cover plate along with frame for mounting of switches/sockets/ regulator etc and continuous earth lead cable wire of similar description complete all as specified and direcited. Note:- (i) Wiring cable shall be provided using colour coding such as Phase - Red, Neutral – Black, and Earth – Green or as approved by Engr-in-charge . (ii) Cutting, chassing in walls (brick or stone) shall be measured and paid separately under respective item here-in-before.

All as per item No. 117 above for one Call Bell point controlled by one push button switch.

All as per item No. 117 above but point wiring for one 5 Amp independent socket point controlled by one switch with 2.5sqmm wiring cable.

All as per item No. 117 above but point wiring for one 3 pin ,5 Amp socket point with other switch on the same board with 2.5sqmm wiring cable.

All as per item No. 117 above but point wiring for one 5/6 pin, 15/16A socket outlet with 2.5sqmm wiring cable.

S&F Modular switch, one way, 5/6 Amp 230, 1 module complete all as specified and directed.

S&F Modular socket outlet, 5/6 Amp-2/3 pin combined, 2 module complete all as specified and directed.

S&F switch Modular, single pole, one way,15/16 Amp ,1 module 230 Volt complete all as specified and directed.

S&F socket outlet modular 6/16 Amp, 2/3 pin combined ,2 module 230 Volt complete all as specified and directed.

S&F ceiling rose, surface backlite,three terminal complete all as specified and directed.

S&F modular lamp holder insulated with back plate suitable for Angle/Batten fitting complete all as specified and directed.

S&F modular fan step regulator 60/80W, 2 module complete all as specified and directed.

S&F MCB SP 240 volt 6 Amp to 40 Amp 10 KA capacity having C-curve characteristics complete all as specified and directed.

S&F MCB SPN 240 volt 16 Amp to 40 Amp 10 KA capacity having C-curve characteristics complete all as specified and directed.

S&F sheet metal enclosure distribution board (DB) double door, IP-43, SPN, 8 way, 240 V with 100-160 Amps rated bus bar of suitable size, including taking down existing DB complete all as specified and as directed.

S&F sheet metal enclosure distribution board (DB) double door, IP-43, SPN, 12 way, 240 V with 100-160 Amps rated bus bar of suitable size, including taking down existing DB complete all as specified and as directed.

S&F TL fitting 20/18 watt for surface and wall mounted LED batten with ultra slim polycarbonate LED lighting fixture with high lumen output environmental friendly energy efficient complete all as specified and directed.

S&F MCB single pole (SP) 63 Amp, 240 Volt, 10 KA, C-curve connected with suitable lugs complete all as specified and directed.

S&F MCB TPN 63 Amps, 240 Volt 10 KA capacity having C-curve characteristics connected with suitable lugs complete all as specified and directed.

S&F box type LED optic fitting 10/9 Watt 2 feet box type complete all as specified and directed.

S&F exhaust fan made of sturdy Engineering plastic complete with louvers shutter, voltage 230V, 50 Hz,RPM 1200, Copper winding of sweep 250MM complete all as specified and directed.

S&F modular bell push, 6Amp, 1 module complete all as specified and directed.

Taking down and refixing connecting electric meter SP up to 60 amp including S & F suitable board close recessed type of suitable size complete all as specified and directed.

Taking down and refixing connecting electric water heater (Geyser 25 ltr) Incl supply and fixing of pvc pipe, fasterner complete all as specified and directed.

Taking down fan ,sealing cable end, dismantling blades and removing fan and blades & deposited to mes store complete all as specified and directed.

S & F LED light fitting 1x9W/1X10W bulkhead luminaires including LED light driver, holder & connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

M&L concealed sub main wiring with two single core PVC FRLSH insulated unsheathed stranded copper conductor cable FRLS, 02 runs of 01 Single core of size 6 sqmm (for main current) drawn in & incl PVC pvc conduit of suitable size not less than 20mm dia ISI marked with all accessories such as tee, bend, joint cover etc round / square blocks at junctions etc, all as per site requirements ISI marked with one run of 01 Single core of size 6 Sqmm (As earth wire) PVC insulated unsheathed stranded copper conductor as a continuous earth wire complete all as specified including taking down old unserviceable sub main wiring and colour coding of cables such as Phase - Red, Neutral – Black, and Earth – Green complete all as specified and directed. Note: (i) cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate. (ii) Two runs of single core for main current and one run of single core for earth continuity conductor & one run of PVC casing -n-caping/pvc conduit shall be measured as one unit length.

S&F ceiling fans with blades, down rods, electronic regulator and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

S&F Modular AC box enclosure with socket plug top and MCB SP 25 Amps flush mounting enclosure complete all as specified and directed. Note: cutting of walls (brick or stone), making good disturbed surface of wall in CM 1:3 and painting with existing colour & specifications is deemed to include in the quoted rate.

M&L for Earthing complete with galvanised steel earth plate electrode, 600x600x6mm buried directly in ground (Earth pit not less than 2.25M deep below the GL) with top edge not less than 1.5 metres below ground level connected with galvanized earth lead wire 4 mm dia by means of bolts, nuts, check nuts & washers all as shown in electric plate no 3 connected to earthing test point all as specified or indicated including testing on completion. Note :- (i) The rate quoted shall also deemed to include the cost of GI wire and protection pipe upto 7.5 Mtr beyond the earth plates electrode and also the cost of the Test point. (ii) Joining of GI earth wire with pipe of the test point shall be done by using suitable cable lugs.