Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
Tender Value
₹9.5 L
EMD Value
₹4,800
Closing Date
30 Dec 2019, 5:00 pmClosed
Managing Director WBEIDC Ltd
Webel Bhavan Salt Lake SEC V EP GP Block KOL 91
Internal Electrical and Fire Fighting installation works
2019_WEBEL_259241_1
Webel/IT Park/07/IDM/KGPCoWork/19-20/67
Open Tender
IT WORKS ORG
Item Rate
30 days
Kharagpur
Please refer to the tender docs
5 documents required · 5 mandatory
₹500
WBEIDC Ltd
₹4,800
SDF BUilding Salt Lake SEC V KOL 91 MOD 126
27 Jan 2020
12 Dec 2019
31 Dec 2019
12 Dec 2019
30 Dec 2019
19 Dec 2019
18 Dec 2019
Amount
MCB Distribution Board
Supplying and fixing of surface/flush mounting double door Horizontal TPN MCB Distribution board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment. Fixing shall be suit at site.
6 way Enclosure (607716).
SIT & C of surface/flush mounting of double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachment.
2+16 way Enclosure (607713).
Supplying and fixing 240/415V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connection as required.
Surge Protective Device
Supplying and fixing Class-2 (T2) 415V, FP Surge Protective Device (SPD) of Imax 40kA/pole mounted on din rail of existing DBs and necessary connection.
MV CABLE
Supply & laying of 1.1KV grade, 4Cx25sqmm A2XFY XLPE Armoured Al. cable with all necessary accessories required for installation on the wall above false ceiling and concealed/surface on wall below the false ceiling, Rate shall include with 2 nos. 8 SWG GI earth continuity Wire for running earth and all civil work like cutting dressing mending good damages as required.
COMPRESSION GLAND
Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :
4 core 25 sqmm.
FINISHING CABLE ENDS
Finishing the end of the 4 core 16 sqmm XLPE Al. armoured cables by crimping method incl. supplying and fixing solderless socket, tapes, anticorrosive paste & jointing materials, lugs etc. as required.
Wiring With PVC Insulated & Unsheathed Single Core Stranded Copper Wire ‘'FRLS' – in PVC Rigid/Flexible Conduit 'FRLS' (ISI Marked) on wall/ceiling/Furniture as per site requirement (concealed / surface)
Supplying & drawing of wiring in 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed copper wire in 20mm size PVC rigid/flexible conduit (as per direction by EIC) 'FRLS' including necessary Fittings and necesaary connections as required
2 x 22/0.3 (1.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC.
2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC.
2 x 56/0.3 (4 sqmm) + 1 x 36/0.3 (2.5 sqmm) ECC.
Supplying & drawing of wiring in 1.1 KV single core stranded 'FRLS' PVC insulated & unsheathed copper wire in 25mm size PVC rigid conduit 'FRLS' including necessary Fittings and necesaary connections as required
4 x 84/0.3 (6 sqmm) + 2 x 56/0.3 (4 sqmm) ECC.
Wiring With PVC Insulated & Unsheathed Single Core Stranded Copper Wire ‘'FRLS' – in PVC Casing-Capping on wall/ceiling/Furniture as per site requirement
Supplying & drawing of Wiring in 1.1 KV grade single core stranded 'FRLS' PVC insulated & unsheathed copper wire of following sizes in 25mm PVC casing-capping (as per direction by EIC) including necessary PVC clips, fittings, necessary connections as required
2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) ECC.
Point Wiring
Supplying and carrying wiring for light, fan and dependent socket points by using 16 SWG MS/PVC conduits with threaded joints of required dia as per IS 732, MS/PVC conduit accessories, MS/PVC flexible conduit with couplers for drops with accessories, 2 x 1.5 + 1 x 1.5 sq mm, 1100V grade FRLS PVC insulated copper wires approved 6A modular type switches and sockets with plates and all accessories for fixing in modular furniture, GI/PVC boxes and other point wiring accessories and carrying out surface/concealed conduit system of wiring as per requirement with all wiring materials. Conduits shall run on surface of the ceiling above false ceiling and concealed in wall by cutting chase in wall and mending good of all the damages. All points shall be earthed with 1.5 sq mm FRLS flexible copper wire. Wires shall be terminated at light fixtures with ferrules, 16A, 4 way connector, wire ends shall not be kept loose/bare. The rate shall also include all accessories of MS/PVC conduits, etc, necessary civil works for embedding conduits and boxes below false ceiling, wherever applicable.
1 light point controlled by 1 no. 6A switch
2 light points controlled by 1 no. 6A switch
3 light points controlled by 1 no. 6A switch
Switches & Sockets
Supply, fixing, testing & commissioning of the following components like approved plate type modular switches, socket etc. duly wired.
1 No. - 6/16A, 6 pin in universal socket controlled by 16A, SP switch, RP in workstations and in cabins, with MS/PVC Box.
Same as above, but without MS/PVC Box.
3 NOS - 6A, 3 pin socket controlled by common 16A, SP switch, workstations with MS/PVC Box
Same as above, but without MS/PVC Box.
1 No. - 6A, 3 pin in universal socket controlled by 6A, SP switch, with MS/PVC Box.
Empty Conduits
Supply and fixing of FRLS PVC (ISI marked) conduit (rigid/flexible) of various dia, exposed or concealed with all accessories like tees, bends, glands etc. JBs (PVC) as required and fish wire etc for wiring purpose complete and mending good damages to building works.
25 mm dia (2 mm thick)
Suplying and fixing of 5.5" x 5.5" Sheet Steel Cover on floor JB
LIGHT & FAN FIXTURE WORK
INDOOR TYPE LUMINAIRE
Supply, installation, testing and commissioning of light fixture complete with all accessories, as required. Erection rate shall include necessary GI chain and supporting suspending hardware for fixing the light fittings.
Recessed mounted light fixture (Philips Cat No. RC365B LED 33 - 6500 PSU OD WH) or approved equivalent.
Recessed mounted circular down lighter (Philips Cat No. DN195B LED 20S - 6500 PSU WH S1) or approved equivalent.
Enclosure Box for AC ODU
Supplying and fixing of Outdoor type MCB SS Enclosure Box provision for 40/63A FP MCB & mending good the damages to original finish including painting, connection & provision for earthing attachement.
POP-UP TYPE FLUSH-MOUNTING BOXES
Supply & Installation of following of "Matt-Aluminium Finish Pop-up Type Flush-mounting Boxes" for workstation & meeting room table applications with "push and slide" locking system for installation use the flush-mounting boxes for concrete floors or the kits for raised access floors or table top.
AL.-MATT FINISH 8 MODULES (1 No. 6A Modular Switch + 2 Nos. 6A Modular SOCKET + 1 No. RJ45 + 1 No. RJ11)
Panel Modification Work
Supply, installation, testing and commissioning of Dual Source Energy (KWH) Meter of Accuracy Class 0.5 and capable of measuring showing (A, V, F, kW, PF, kWh-EB&DG, etc.) in existing floor panel feeder (63A) including necessary wiring along with Resin cast transformer (60/5 A, 10 VA, CL-1) - 3 nos with accessories retro fitting in floor- panel
Supply, installation, testing and commissioning of Dual Source Energy (KWH) Meter (Equivalent to EM 6438) of Accuracy Class 0.5 and capable of measuring showing (A, V, F, kW, PF, kWh-EB&DG, etc.) in existing floor panel feeder (63A) including necessary wiring.
Supply, installation, testing and commissioning of Multifunction meter (Equivalent to EM 6400) with RS 485 communication port in existing floor panel including necessary wiring.
FIRE FIGHTING
SPINKLER LINE
SITC of "MS Black ERW Pipe" shall confirm IS : 1239. The quoted rate shall also include necessary hanger & clamp support arrangment for fixing on the wall or suspend from the ceiling/truss and painting with single coat of zinc chromate primer & two coats of synthetic enamel paint & welding etc. complete in all respect.
80mm Dia. (B-Class, Medum Quality)
40mm Dia. (B-Class, Medum Quality)
32mm Dia. (B-Class, Medum Quality)
25mm Dia. (B-Class, Medum Quality)
SPRINKLER
Supply and Fixing of "Pendent Type" C.P. brass quartzoid bulb quick response type sprinklers (FM approved) with 15mm screwed end connection & to be operated at 68Deg C etc. complete as required. The installation should confirm to IS : 15105 : 2002 & amended upto date.
Supply and Fixing of "Upright Type" C.P. brass quartzoid bulb quick response type sprinklers (FM approved) with 15mm screwed end connection & to be operated at 68Deg C etc. complete as required. The installation should confirm to IS : 15105 : 2002 & amended upto date.
Supply,installation,point marking,testing and commissioning of following items in real ceiling/false ceiling/wall with all installation accessories as per requirement and integration with existing FDA Panel.
Addressable type optical smoke detector (photoelectric sensor for smoke) with base
Response Indicators comprising of indicator lamp
Suply and fixing of SS Corrugated flexible pipe for dropping sprinklers below false ceiling (750mm length)
Supply and fixing of approved type rosette plates for sprinkler below false ceiling of 2mm thick
SITC of "6Watt Ceiling Speaker" within finished enclosure suitable for wall/ceiling mounting complete as required and intigration with existing PA system
SITC of 2 X1.5 sqmm standard copper conductor PVC insulated PVC sheathed FRLS wire through 16mm flexi PVC conduit for necessary interconnection of the above equipment.
SATABDI ENGINEERING COMPANY
Wembley Interior Pvt. Ltd.
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .