SPECIAL REPAIRS TO G BLOCK AT MILIT GIRINAGAR PUNE 25

B/R PORTION Dismantling Plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and directed.

Dismantling framed timber scantlings work 40 Sqcm and over in section, in any position complete all as specified and directed.

Ditto in fillets, rails, posts, rafters, purlins, etc under 40 Sqcm in section complete all as specified and directed.

S&F Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed.

S&F Plain, galvanised, mild steel sheeting, in ridges, hips, valley gutters, drip and straight flashings 0.63 mm thickness (length and girth as fixed) with grade of zinc coating 275 complete all as specified and directed.

M&L for Eaves/weather boarding with 20mm thick fibre cement board (Non asbestos) and fixed with self drilling and tapping screws of CSK head and joints finished with jointing compound and fibre tape as per manufacturer's instructions complete of approved arch pattern, size, colour and shape including dismantling of old boarding/eaves board fixed in any position complete all as specified and directed.

Dismantling Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/ blankets, any thickness, including cover fillets complete all as specified and directed.

S&F frame work for seamless ceiling comprising of GI perimeter channel 0.55 mm thick with two unequal flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm center to center/ intermediate channel 0.9mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm center to center with GI cleat and steel expansion fasteners with and including ceiling section (not exc. 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lip of 10.5 mm fixed to the intermediate channel at 457 mm center to center complete all as per manufacturer's instructions and as directed by EIC.

M & L for providing and fixing Gypsum Board 12mm thick in ceiling fixed with screw as per manufacturers instructions complete all as specified and directed.

M & L for providing and fixing 3 mm thick plaster of paris in ceiling ( gypsum anhydous) to flat surface complete all as specified and directed.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing) removing serviceable tiles to store and rubish off the premises complete all as specified and directed.

Demolition of Brickwork or stone masonary built in Cement mortar including all quions, arches, pillars etc but excluding ashlar facings, dressed stone work and precast concrete articles complete all as specified and as directed .

Dismantling stone slab of any description or thickness in floors, approns etc complete all as specified and as directed.

S & F in repairs Machine cut cuddappa stone slab one side polished 20 to 25mm thick, set and jointed in neat cement slurry and pointed in coloured cement to match, laid over and including 20mm screed bed in cement mortar (1:6) complete all as specified and directed.

M & L in repairs for granite 18-20mm thick (of any type) work (table rubbed and polished) colour appd by Engr-in-harge/GE(I) in steps, jambs, pillars, window-cills, cooking platforms and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete with Mirror polishing on marble/ granite/Kota stone/ stone work where ever required to give high gloss finish complete all as specified and directed.

Rounding edges of stone one edge, such as in steps, cooking platform, window cill and other similar situation complete all as specified and directed.

M & L for plain cement concrete 1:2:4 type B-0 (using 12.5mm graded stone aggregate) as in floor levelling course and in similar situations 25mm thick complete all as specified and directed.

M&L double charged vitrified Ceramic tiles 8 to 10mm thick (square/ regtangular) polished, area of each tiles n.exc. 0.36 sqm as in flooring etc. and jointed neat in cement slurry and pointed in white or colour cement to match over with and including 15 mm thick rendering in CM 1:4 complete all as specified and directed.

M&L Glazed ceramic coloured tiles in vertical surfaces 300 x 450 x 7mm as in dado/skirting etc including highlighter/claddding tiles as required and joineted neat in cement slurry and pointed in white or colour cement to match over 10mm thick screed bed in CM 1:4 complete all as specified and as directed.

M&L Pre-cast cement concrete block Type C1 1:3:6 set in cement mortar 1:6 , with solid block masonry with solid blocks,exc 10cm in width and setting in mortar, complete all as specified and directed.

M&L for coloured glazed vitrified ceramic tiles 8 to 10mm Thick (square/ Rectangular) polised, as in skirting, set and jointed in neat cement slurry and pointed in coloured cement to match with tiles, laid over and including 10mm thick backing coat in CM (1:3) complete all as specified and directed.

M&L for coloured Non - skid Ceramic tiles 7 to 8 mm thick area of each tile exceeding 0.18 sqm but not exceeding 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and directed.

Taking down Chowkhats or frames exc 1.5 sq. m but n exc 4 sq. m each with shutters (without taking off shutters from the frame) complete all as specified and directed.

M&L for PCC 1:3:6 type C1 (using 20mm graded aggregate) as in door frame filling and similar work filling complete all as specified and directed.

S & F 2nd class hardwood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed.

S & F factory made Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification complete all as specified and directed.

S & F 35mm 2nd class hardwood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

S&F stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm & fixed with stainless steel wire staples complete all as specified and directed.

S & F Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides of thickness 40 mm. complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement at site as per specification complete all as specified and directed.

S&F in repair aluminium alloy, anodised, sliding door bolts with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section etc length of bolt 250 mm complete all as specified and directed.

M&L for 0.90 mm thick Decorative laminate type 1 of surface finish, colour and pattern as approved, fixed with approved adhesive as per manufacturer's instructions complete all as specified and directed.

S&F in repair aluminium anodised barrel tower bolts of extruded section 200 mm long complete all as specified and directed.

M&L in repairsfor 140 mm long door stopper of brass body and tongue with hard drawn steel spring complete all as specified and directed.

S&F in repair aluminium handles, anodised, cast type, of size 150 mm complete all as specified and directed.

S&F 300mm, Brass ordinary rat tail rod pattern springs including roller and roller plate including fixing to door complete complete all as specified and as directed.

S & F butt hinges medium weight cold rolled mild steel size of hinges 100 mm complete all as specified and directed.

S&F stainless steel chromium plated 6 Pin, 45Cm to 60Cm long hanger fixed to wall with screws complete all as specified and directed.

Dismentling wrought iron or mild steel work of such as grill/roof purlin etc not otherwise provided for complete all as specified & directed.

M&L Framed work such as grills,gratings, etc. with ends of bars shouldered and/or riveted, or forged into spikes, framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings, frame work of water tanks and similar work conforming to Fe-290.Gde-E-165. complete all as specified and directed.

M&L for two coats of synthetic enamel paint over a coat of red oxide on new/old steel surfaces exc. 10 cm width or girth etc. complete all as specified and directed.

M&L for 304 grade stainless steel work as in railing made of hollow tubes, channels plates, etc with hand rail, baluster, including cutting, Stainless steel welding, cutting, buffing, grinding, polishing and fixing of stainless steel baluster/railing with necessary all acessories and complete all as specified and directed.

S & F in repairs PVC connection 45 cm long 15 mm bore with 2 Nos PTMT check nuts complete all as specified and directed.

Supply and fix in repairs for vitreous china coloured wash down water closet (pedestal pattern) cascade type ‘P’ trap, in built seat cover and flushing cistern, low level, valveless, symphonic action type complete with inlet ball valve, float and handle complete all as specified and as directed.

S & F stainless steel grating doom 125mm dia complete all as specified and directed.

S&F in repairs Brass CP mixer including connection pipes for mixing hot or cold water screwed down for uPVC/iron pipe and fixed complete complete all as specified and directed.

S&F in repair 125mm chromium plated shower roses with shower arm with or without swivel joints, any size including fixing to uPVC/Steel pipe complete complete all as specified and as directed.

S&F in repirs 15mm dia bore, two way bib tap, long body, fancy type, brass chromium plated, with crutch handle, screwed down for uPVC/iron Pipe complete all as specified and directed.

S & F full length Swivel glass mirror with chrome finish and luxury look superior built quality product including framework around glass complete all as specified and as directed

S&F in repair fancy type, chromium plated angular stop cock fixed with wall flange for 15mm bore of pipe complete all as specified and as directed.

M&L for 100mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete complete all as specified and as directed.

S&F in repairs Chromium Plated Toilet Paper Holder Complete all as specified and as directed.

S&F in repairs Hand shower (health faucet) (ABS Chromium plated) with 8mm dia, 1.2mtr long flexible tube and wall hook complete all as specified and as directed.

S&F in repairs Bib taps fancy type long body chromium plated for 15mm bore pipe, screwed for iron pipes or for brass ferrule all complete as specified and as directed.

S&F in repairs 60 cm long brass CP tubular towel rail 20-mm dia D type complete all as specified and directed.

S&F in repair Stainless steel fancy chromium plated 25mm dia as in curtain rods with domes bothside of rod & chromium plated brackets suitable for 25mm dia curtain rod (minimum projection from wall 75mm) fixed in wall including drilling, rawl plug, screws etc complete all as specified and directed.

Taking down cement plaster, any description on brick, concrete or stone walls or ceiling including racking out joints, hacking for key, scrubbing down with water etc and removal of rubbish off outside MD land complete all as specified and directed.

M & L rendering 15mm thick on brick wall or concrete surface consisting two layers, under layer of 10mm thick in CM (1:6) & top layer of 5mm thick in cement mortar 1:4 mixed with water proofing compound, finished even and smooth without using extra cement complete all as specified and directed. Note:- Water proofing compound shall be measured and paid saperately.

M&L for Rendring 15mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 on walls, finishing surfaces even and smooth w/o using extra cement complete all as specified and directed. Note : 1. mixed with water proofing compound @ 3% by weight of cement complete all as specified. 2. Water Proofing compound shall be measured and paid for sepuratly as "Supply Only"

Supply only integral water proofing compound complete all as specified and directed

M&L for preparation of surfaces and applying 2mm thick wall care putty in two layers on walls/concrete over old /new plaster surfaces internally complete all as specified and directed.

M&L for two coats of oil bound distemper over a coat of approved primer on Old/New surfaces of wall complete all as specified and as directed.

M&L for preparation /repairs of plastered or unplastered old decorated surfaces of ceiling etc. incl pillasters and cornices etc. incl brooming down of steel wire brushing scrapping down smoke soot moulds moss and efflorescence salts and trading oil and grease spot, washing etc. and applying two coat of oil emulsion distemper on plastered or unplastered new decorated surfaces of ceiling complete all as specified and directed.

M&L for applying two or more coats of 100% Premium acreylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @1.43litre/10sqm over and including priming coat of exterior primer applied @ 0.90litre/10Sqm over Old/New surfaces of wall including necessary scaffolding required for painting work, safety measures etc. complete all as specified and directed.

S&F in repair Gun metal globe or gate valve with iron wheel head screwed both ends size 20mm for iron pipe, fixed complete all as specified and directed.

S&F PVC (SWR) pipes single socketed in any length with rubber ring joints laid in trenches or in floors of size 110mm bore including taking down complete all as specified and directed.

S&F PVC (SWR) pipes, single socketed in any length with rubber ring joints, laid in trenches or in floor of 75mm bore including taking down complete all as specified and directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 110mm bore including taking down complete all as specified and directed.

S&F PVC (SWR) junction, (Single Tee) equal or unequal 75mm bore including taking down complete all as specified and directed.

S&F PVC (SWR) bends any radius 110 mm bore including taking down complete all as specified and directed.

S&F PVC (SWR) bends any radius 75 mm bore with trap door including taking down complete all as specified and directed.

S & F PVC (SWR) vent cowl 110mm Bore including taking down complete all as specified and directed.

S & F PVC (SWR) vent cowl 75mm Bore including taking down complete all as specified and directed.

S&F PVC (SWR) gully traps 125/100 setting and jointed in cement solvent including taking down complete all as specified and directed.

S & F with grey cement and pigment Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade including 50 mm thickness compacted bed of fine sand, compacting and proper embeding/laying of inerlocking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with sand and cutting of paver blocks as per required size and pattern, finishing and sweeping extra sand complete all as specified and directed.

S&F in repairs vitreous china wash hand basin counter type, white, 550x 400mm flat back including providing CI brackets, PVC waste pipe 32mm dia, CP brass waste coupling 32mm dia etc, including 15mm bore CP fancy type tall boy /swan neck pillar tap complete all as specified and directed.

Provding and carry out water proofing treatment to sound ,moisture free concrete surface system includes preparation to remove loose dust, dirt, loose mortor, curing compound etc carry out cementious injction grouting at leakage points and construction joints using cement slurry modified with Cebex 100 plasticised expandive ground admixture supplies in 225 gm pouch, treatment of construction joints using polymer modified mortor prepare by using Nitobond SBR latects, application of polymer modified battaat floor, wall junction, filling of annular space around rain water outlet using conbextra GP2 non shrink cementious grouts. Andulated surface and npot hole shall be treated with epoxy mortor or putty to obtained sound/levelled surface. Application of primer Nito proof WB primer on sound mortor slab surface. Followed by application of coat of Nito proof 600 PF liquid applied single component pitch free polyurithane coating supplied in 25 kg drum coverage @ 2.30 Kg/m2 to achieve 1.5 mm thickness in two coats complete including all tools and tackles as per manufactures specification. Coating shall be having crackbriding of 2 mm, elonagtion (ASTMD 124) greater than 600 percentage, tensile strength ( ASTM D412), 95 percenatge, 85 percentage of solid contantents, tear resistance (ASTM D624),15 KN/M, shore A hardness (ASTM D 2240), 60, water vapour transmission not more than 1 gm /M2, water permeability ( DIN-1048) -NIL, services temperature -40'C to 70 degree 'C', flash point greater than 70 'C HSE guidelines:- It is recommanded to provide adequate general and local exhust ventillations, providing protection to Eye, face, Hand andother skin by wearing appropriate glouse, google, face cilid, respiratory protection etc, directed in SDS of the product .Properties of PU based chemicals shall confirm to following Technical specifications: a) Highly Elastic. b) UV Resistance c) Adhesion to concrete. d) Tensile strength: not less than 2.0 N/Sqmm for free film. e) Elongation not less than 300%. f) Solid content by weight not less than 60%. g) Air/ water permiability BSEN 12390 at 5 bar- 72 hours should be NIL andminium dry film thickness of water proofing membrane must be 1.0mm. h) Accelerated waethering (ASTM 453) Pass 1000 hrs. i) Reaction to fire- non inflammable.

M&L for making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) over 75mm thick bed of dry brick ballast 40 mm nominal size, well rammed and consolidated and grouted with fine sand, including necessary excavation, levelling & dressing & finishing the top smooth complete all as specified and directed.

Dismantling water tanks of Exc 500 & n Exc 1000 capacity in litres and removing complete all as specified and directed.

S&F Rotational moulded polyethylene water storage tanks of capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position complete all as specified and directed.

M&L for 18/19 mm thickness Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive, fixed with screws to timber frame work complete all as specified and directed.

S&F Brass 4 levers Locks, cupboard, grade I, size 65 mm complete all as specified and directed.

S&F in repairs readymade 9 feet pulley operated cloth drying system, aluminium anodised 22mm outer dia pipe, channel assembly, locking system to hide rope knot, ropes 4mm dia HDPE double core & fitting material etc. complete all as specified and directed.

S & F for Modular kitchen cabinet and wall cabinet comprising of with and including necessary all other fixing arrangement and screws as per requirement at site etc. All cabinet made of factory made moulded 18mm thick glossy/Matt Finish marine ply and outer door and topside shall be of 18mm thick prelam coloured solid marine ply, for fixing the items fitted in position and complete all as specified and directed.

S & F 12 mm thick factory made moulded glossy/Matt Finish solid marine plywood board for kitchen wall cabinet back side and etc comprising with and including necessary all other fixing arrangement as per requirement at site. For fixing the items fitted in position to walls minimum screws size 120 mm complete all as specified and directed.

S&F in repair in repair stainless steel kitchen sink with drainage board of overall size 915x460mm and bowl size 410x330x160mm with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets including taking down complete all as specified and directed.

S & F for stainless steel grill pattern Bottle Rack size 8" wide and 20" deep including stainless steel channels of make hettich, godrej or hafale.Dia of stainless steel bar used to make grill pattern shall be min 5mm fixing the items fitted in position and complete all as specified and directed.

S & F for stainless steel grill pattern basket of size 21"x4"x20" deep including stainless steel drawer channels of make hettich, godrej or hafale . Dia of stainless steel bar used to make grill pattern shall be min 5mm.Fixing the items fitted in position and complete all as specified and directed.

S & F for stainless steel Cuttlery Box of size 21"x4"x20" deep with including stainless steel drawer channels of make hettich, godrej hafale. Thickness of stainless steel sheet shall be 1mm thick. Fixing the items fitted in position and complete all as specified and directed.

S & F for stainless steel grill pattern Plate rack of size 21"x8"x20" deep with including stainless steel channels of make Hafele, Godrej, Hettich .Dia of stainless steel bar used to make grill pattern shall be min 5mm. Fixing the items fitted in position and complete all as specified and directed.

S & F for stainless steel grill pattern Cup and Soucer Rack of size 21"x6"x20" deep with including stainless steel channels of make Godrej, Hettich or Hafale. Dia of stainless steel bar used to make grill pattern shall be min 5mm. Fixing the items fitted in position and complete all as specified and directed.

S&F for stainless steel grill pattern Grain Trolley with base of size 21"x24"x20" deep and including stainless steel channels of make :- Hettich, Godrej or Hafale. Dia of stainless steel grill shall be minimum 5mm. Fixing the items fitted in position and complete all as specified and directed.

S&F chromium plated auto hinges split box type overlay door mounting option, opening angle 110 degree fixed, with screw complete all as specified and directed.

S&F 100 mm long cupboard stainless steel handles fixed with nuts screws and washer complete all as specified and directed.

M&L for Cupboard magnet of size 50mm including high quality magnet and steel plate complete all as specified and directed.

Excavating in post holes (or similar holes) each n exc 0.50 cum, getting out, returning filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm in soft/ disintegrated rock and removing surplus earth work complete all as specified and directed.

M&L for hardcore of gauge n.exc. 63 mm,with broken stone and boulder, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rammed to a true surfaces complete all as specified and directed.

M&L for PCC 1:2:4 using 40mm graded crushed stone aggregate, type B2 as in foundation filling & mass concrete complete all as specified and directed.

S&F structural steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes confrming to IS 4923 (1997) grade St-240 with necessry angle cleats and girder plate etc for water tank staging complete all as specified and as directed.

S&F in repairs Welded steel wire fabric weight exc. 4.0 Kg/Sqm to wood or steel members complete all as specified and directed.

S&F for 20mm dia CPVC pipes SDR 11 including all Brass CPVC fittings for 20mm bore pipe on walls/ceiling or laying in floors and including 20 to 15mm dia fittings for fixing of sanitary fittings complete including taking up or down steel tubing and connections or removal to store complete all as specified and directed.

S&F for 15mm dia CPVC pipes SDR 11 including all Brass CPVC fittings for 20mm bore pipe on walls/ceiling or laying in floors and including 20 to 15mm dia fittings for fixing of sanitary fittings complete including taking up or down steel tubing and connections or removal to store complete all as specified and directed.

M&L cutting chases pinning in brick work for concealed water tubing etc. and making good to facings where required and pointing in cement motar 1:3, cutting n.exc. 10cm girthcomplete all as specified and directed.

M&L for Injecting low viscosity grade epoxy grout by pressure by epoxy or grouting pump and compressor. Mixing :- Material components DR BECK 505C + EK411 HARDNER + SOLVENT 100:50:50 weight batching. Grouting :- fill the grouting gun with resin mix maintain desired pressure at exit (7 to 10 kg /sqcm) by monitoring pressure gauge at exit. Grout the material through prefixed nozzles in the structural elements till its refusal, seal the nozzle with epoxy sealant (EPCO 10) after the refusal. Monitor leakages through other nozzles while grouting and seal them as per the requirement. Repeat the process of the nozzles. Complete the poeration at pot life of material, grouting is continued to all the nozzles from bottom to top and not from top to bottom. cleaning the gun and accessories (Valves, pipes and other fixtures) with T-60 thinner / or equivalent of Dr fixit. Krishna chemical, sunanda etc. The work should be carriedout with necessry helmet, safety belt and adequate labour insurance under the supervision of qualified supervisor etc.complete all as specified and directed.

M&L for finishing wall with textured interior paint of required shade(appd by Engr-in-Charge/GE(I) : New work (Two or more coats applied @3.28 ltr/10 Sqm) over and including priming coat of interior primer applied @ 2.20kg/10 Sqm ccomplete all as specified and directed.

Demolition of cement concrete (unreinforced) in ground floors and pavings not exc. 15cm thickness (below or above ground level) and removing from site all as specified and directed.

M&L for plain cement concrete type D-2, 1:4:8 (40mm graded stone aggregate) as in sub base 75mm thick complete all as specified and directed.

E/M PORTION Taking down carefully aluminium / copper point wiring any type for one light, fan, socket power point or buzzer controlled by one switch complete including fitting / fixtures such as switches, ceiling roses, holder, socket, light fitting etc; for credit and making good disturbed surfaces of walls, ceilings etc complete all as specified and directed.

Taking down old U/s DBs including all fittings or switches of any type and any size. complete all as specified and directed.

All as per item here-in- above but for 3 pin 5 Amps switch socket combination on independent board with 1.5 sq mm copper cable. complete all as specified and directed.

All as per item here - in - above but for 5 Amps socket point on the same board controlled by one switch. complete all as specified and directed.

All as per item here-in- above but for 3 pin 15 Amps switch socket combination on independent board with 4.0 sq mm copper cable complete all as specified and directed.

All as per item here-in- above but for One light point controlled by two 2-way switches with 1.5 sq mm copper cable. complete all as specified and directed.

S & F Modular switch 1 way 6/10 Amp SP, 1 module complete all as specified and directed.

S & F Modular switch 2 way 6/10 Amp SP, 1 module complete all as specified and directed.

S & F Modular switch 1 way 16/20 Amp SP, 1 module complete all as specified and directed.

S & F Modular Fan step regulator, 120W - 2 module complete all as specified and directed.

S & F for ceiling rose surface bakelite 3 phases polycarbonate isolated body complete all as specified and directed.

S & F Modular Socket 6 A 2/3 pin combined , 2 module complete all as specified and directed.

S & F Modular Socket 6 A /16 A-2/3 pin combined 2 module complete all as specified and directed.

S & F Modular Bell push switch 6 Amp 1 modulecomplete all as specified and directed.

S & F Bell Buzzer/Ding Dong AC 230 volts, single pole complete all as specified and directed.

Supply and fixing LED lights fitting 1x 20W, 220V, AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing in replacement decorative wall light fixture metalic body single head wall light suitable for 15/20 watt maximun wattage including WW bulb complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and directed.

S& F foot light 4 module 5-9 watt with robust designed assembly plates smug fit on the wall dust free glossy Finish complete all as specified and as directed.

M&L for sheet metal enclosure MCB DBs VTPN , 4 way 415 V, with 250 A rated copper bus bar, double door, IP 43, suitable for 160 Amp MCCB 25 kA as incomer as per IEC 61439-3, suitable for flush mounting and surface mounting including taking out complete all as specified and as directed.

S &F MCCB 3 Pole, 415 V, AC, C - curve, Adjustable type, 160 Amps with breaking capacity 36 KA complete all as specified and directed.

M&L for sheet metal enclosure MCB DBs SPN , 16 way 240 V, with 100 A rated copper bus bar , double door, IP 43 as per IEC 61439-3 , suitable for flush mounting and surface mounting including taking out complete all as specified and as directed.

M & L for MCB SP 6-32 Amps, 240 volts, 10 kA ISI marked as per IS/IEC 60898-1 2002, C -curve, IP 20 including taking out complete all as specified and directed.

M & L for MCB SPN 32/40 Amps, 240 volts, 10 kA ISI marked as per IS/IEC 60898-1 2002, C -curve, IP 20 including taking out complete all as specified and directed.

Supply and fixing single pole and neutral enclouser with a two pin and earth plug and socket complete with one pole MCB 20 Amps complete all as specified and directed.

Taking down burnt/unserviceable sub main wiring any size complete and making good disturbed surfaces of walls complete all as specified and directed.

M & L for sub main wiring with two single core FRLSH, PVC insulated unsheathed, 1100 Volts grade, copper cable 10 sqmm stranded conductor and drawing through PVC conduit (MMS ISI marked) of suitable size with accessories including contiuous earth wire FRLSH, PVC insulated unsheathed 1100 volts grade, cable 10 sqmm copper conductor and connected to common earth dolly complete all as specified and directed. Note :-(i) One run of conduit, two runs of cable and one run of earth wire shall be measured and paid as one unit.

All as per herein above item but for 2X6sqmm +1x6sqmm earth wire complete all as specified and directed.

All as per herein above item but for 2x4.0 sq mm and 1x4 sq mm as earth wire complete all as specified and directed.

M&L for Removing the existing fan and servicing, cleaning and spray painting, rewinding & refixing the same with necessary 3 core wire and accessories complete all as specified and directed.

S&F Blades for 1200 mm ceiling fan in place of unserviceable blades including required nuts/washers etc. accessories complete all as specified and directed.

S&F Canopy for 1200 mm ceiling fan in place of unserviceable Canopy including required nuts/washers etc. accessories complete all as specified and directed.

S&F down rod 2 feet for 1200 mm ceiling fan in place of unserviceable downrod including required nuts/washers/pins etc. accessories complete all as specified and directed.

Removing the existing exhaust fan any type and after servicing, cleaning and spray painting, rewinding & refixing the same with necessary 3 core wire and accessories complete all as specified and directed.

Taking down the existing unserviceable Geyser and after disconnecting electrically & mechanically and examine & carry out the servicing/overhauling the geyser of 25/50 ltrs capacity by thoroughly cleaning the tank, thermostat, heating element and LED Lamp indicator, testing in all respect for smooth running and refixing ccomplete all as specified and directed.

Taking down the existing electric meter of Single Phase/ Three phase any capacity and make after disconnecting electrically and S&F new electric meter box (Polycarbonate body) suitable for 3phase/single phase electric meter including refixing of electric meter in new meter box after servicing & removing of old u/s meter box and made good the discturbed surfaces complete all as specified and directed.

M&L for rigid non mettalic PVC conduit exclusive of boxes (junction/terminal) inclusive of all tees, bends, elbows, reducers, bell mouth tube ends and fixing accessories such as couplers lock nuts saddles, pipe hooks etc dia 20 mm complete all as specified and directed.

S&F metal flush box 1/2 module complete all as specified and directed.

Supply and fix TV socket 1 module complete all as specified and directed.

Supply and fix Telephone socket 1 module complete all as specified and directed.

Supply and fix inner and outer modular cover plate of 1/2 M complete all as specified and directed.

M&L for earthing complete with galvanised steel earth plate electrode 60 cm x 60 cm x 6mm thick buried directly in ground (earth pit not less than 2.25 metre below ground level) with top edge of the earth plate not less than 1.5 metre below ground level, connected to GI earth wire 4 mm dia by means of bolts, nuts, check nuts and washers of galvanised iron or steel all as shown in electrical plate No 3 of SSR Part I connected to earth test point all as specified including excavation and connected earth work, in soft/loose soil, removing soil upto 50m, PCC 1:3:6 type C1 as in pit, 20mm dia GI pipe medium grade for watering pipe, 15mm bore GI medium grade earth lead protection pipe, 50mm thick RCC 1:2:4 type B1 cover slab of earth pit reinforced with 8 mm dia TMT Bars @ 10cm C/C both ways and with handle made out of 12mm dia bars, funnel, strainer, alternate layer of charcoal dust and common salt and testing on completion, complete all as specified and directed.

Excavation in trenches not exc. 1.50 Mtr wide and not exc. 1.50 m deep and getting out in soft/loose soil for laying of pipe line complete all as specified and directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm complete all as specified and directed

Removing excavated material to a distance n.exc 50 m and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and directed

Supply and fixing / laying of GI pipe medium grade 50 mm dia including all fittings such as bend, tee, elbow, union, reducer, tee reducer etc laid or fixing/clamping on floor /surface/air/wall complete all as specified and directed.

Supply and fixing / laying of GI pipe medium grade 25 mm dia including all fittings such as bend, tee, elbow, union, reducer, tee reducer etc laid or fixing/ clamping on floor /surface/air/wall complete all as specified and directed. (Branch Connection from 50 mm GI to Prop Building OHT)

S&F in repairs GM globe/gate valve 50 mm bore with iron wheel head, screwed both ends for iron pipes, ISI marked, conf to IS complete all as specified and directed. Note: Union or long screw have to provided before fixing of gate valve if required.

S&F in repairs material and labour for fixing GM globe/gate valve 25 mm bore with iron wheel head, screwed both ends for iron pipes, ISI marked, conf to IS complete complete all as specified and directed. Note: Union or long screw have to provided before fixing of gate valve.

M&L for construction of valve chamber of size 900 x 900 x900 mm internal dimensions, 3 mm thick MS sheet cover with 2 Nos MS hinges welded to angle iron frame of 40mm x 40mm x 5 mm thick with lifting hook and locking arrangement complete with necessary earth work 230 mm thick, brick work in CM (1:6), PCC bed (1:4:8) type D2 150 mm thick, cement plastering, finishing 15 mm thick in CM (1:4) and applying a coat of black bituminous paint to the steel surfaces complete all as specified and directed

Taking out LT UG Cable from any type of soil cable underground LT any size complete all as specified and directed.

Supply, laying, jointing and testing LT cable in trenches or on poles / walls, XLPE Insulated screened, PVC bedded, galvanized steel strip or wire armored, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 70 sqmm 3.5 core for laying in trenches and poles /walls complete all as specified and directed.

Supply & fixing DWC Pipe heavy duty minimum 50 mm dia of required length for protection of cables complete including necessary MS clamps, nuts, bolts fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Supply & fixing GI Pipe light grade 50 mm dia, ISI marked, of required length for protection of cables complete including necessary MS clamps, nuts, bolts and washers etc fixed complete to walls and ceilings or laid in floors complete all as specified and directed.

Please Enable Macros to View BoQ information