REPAIR REPLACEMENT OF JOINERY FLOORING WALL AND

Amount

Taking down chowkhat or frame exc 1.50 Sqm but n.exc 4.00 Sqm with shutter (without taking off shutter from frame ) etc complete all as specified.

Taking down door shutter exc. 1.0 Sqm and not exc.2.0 Sqm complete all as specified.

Taking down chowkhat or frame n.exc 1.50 sqm with shutter (without taking off shutter from frame ) etc complete all as specified .

S&F for solid PVC door frame (single rebated) of size 50mm x47 mm made out of 5 mm wood grain printed PVC sheet and edges will be painted to match the printed sheets reinforced with MS square tube complete all as specified & shown on drawing.

S&F for Factory made solid PVC moulded with particle board core door shutter 28 to 30 mm thick(stiles) with 2,4 or 6 raised panel design with 2 mm thick moulded PVC sheet on the front panel and 2 mm plain colour PVC sheet on back face, supplying & fixing in the frame at site as per specification & drawing complete all as specified.

S&F Aluminium, anodised barrel tower bolt of extruded section of 150mm long complete all as specified.

S&F Aluminium handles extruded type, anodised of 150 mm size complete all as specified.

S&F 100mm size butt hinges medium weight cold rolled stainless steel complete all as specified.

S&F for 250mm size Mild steel sliding door bolt not less than 12 mm dia with and including a minimum of 6 bolt and nuts, four on bolt plate and two on staple plate , complete all as specified.

M&L 30mm thick flush shutter solid core construction with block board core and plywood face panels, commercial type on both sides complete all as specified.

S&F for 2nd class hard wood 35mm thick plain framed, panelled shutter (two no of panels) with lock rail and panel of 12mm BWP commercial ply complete all as spd and directed. The size of rail and styles shall be as per IS -1003 (part-1) , kiln seasoned and chemically pressure treated, complete all as specified.

S&F for 2nd class HW glazed and skelton shutters 35mm open rebated and prepared to receive glass, gauze etc (any number of sash bars) edges of framing plain chamferred or rounded fitted with mitred beads for securing glass etc sizes of member of shutter as specified in SSR Pt-1(2009) , section 8, clause 8.20 (a) fitted to chowkhat , complete all as specified.

M&L for painting with two coats of synthetic enamel paint over one coat of pink primer on new wood based surface exc. 10 cm width or girth, complete all as specified .

M&L for MS work as in hold fast, clamp , stay and similar articles conforming to Fe 410-0 or Fe 310-O, complete all as specified .

Supply only Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with stainless steel staples, complete all as specified .

Taking down steel window / ventilator n.exc 2.00 sqm each with shutters (wihtout taking of shutter from frame ) etc complete all as specified .

S&F in repair Steel window with side hung shutters including box type hinges with Z section, steel handle, 75mm long two nos tower bolt each shutter, and steel peg stay complete with glazing bar dovetailed or welded including one shop coat zinc chrome primer complete all as specified.

S&F in repair Steel window with side hung shutters including box type hinges with Z section , steel handle, 75mm long two nos tower bolt each shutter, and steel peg stay complete without glazing bars dovetailed or welded including one shop coat zinc chrome primer complete all as specified.

S&F in repair steel ventilator with top hung shutter including hinges steel peg stay including one coat shop zinc chromium primer, complete all as specified.

M & L for Framed work such as grills, grating doors or gates etc. of angle with ends of bars shouldered and or rivetted or forged into spikes framed guard bars, barred iron doors, ladders, framed balusters, walk ways, railings for terrace, framework of watertanks and similar work confirming to Fe 290 Gde-E-165.

M&L for preparation of new steel surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint complete all as specified.

M&L for preparation of new steel surfaces of any description not other wise described over 10 cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified.

Supply only 3.0 mm thick clear transparent cast acrylic sheet fiixing with silicon glass glue and oil putty /wooden beads including glazing clips in square n exc 0.5 sqm each pane complete all as specified.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins/ spring clips and removing off the premises as directed complete all as specified

S&F 3.0 mm thick clear transparent cast acrylic sheet fiixing with silicon glass glue and oil putty /wooden beads including glazing clips in square n exc .5 sqm each pane complete all as specified .

S&F 3.00mm thick pin head glass and glazing with oil putty including glazing clips in Squares/Rectangle n.exc 0.5 Sqm in each pane fixed in repairs complete all as specified .

S&F anodised aluminium sections in any of door, windows and ventilator etc including fabricator of frame shutter and fixing with necessary glazing clips, joining cleats etc., complete all as specified including taking down existing.

M &L repair to aluminium door or window of any size, shape and description including easing, cutting, drilling, including provn of parts such as rubber gasket, blanket cloth, handle,locking arrangement ,etc to make door or window fully functional, complete all as specified .

S&F Aluminium handle 200 mm long American type fixed with screw complete all as specified .

Supply only 5.0 mm thick tinted sheet glass ordinary quality and glazing with glazing clips complete all as specified

S&F Aluminium grill 10 mm thick of pattern Deco -DG-14 surrounding by F-channel of 1.2 mm thick complete all as specified.

S&F in repair double action floor door spring hydraulically regulated made of minimum 1.25 mm thick aluminium alloy sheet foundation box main body with stainless steel cover,governing pivot made of mild steel heavy duty suitable for Aluminium door complete all as specified .

S&F fixed in repairs fancy type 19/20 mm drapery curtain rod MS tubing with PVC coating ,complete fixing arrangement complete all as specified .

S&F in repair set of two nos PVC brass coated finials (Latto) to be fixed with 19/20 mm drappery/curtain rod complete all as specified .

Dismantling floor , hearth or wall tiling including cement mortar bedding ( but not backing ) removing serviceable tiles to store and rubbish off the premises complete all as specified .

M&L for 15 mm thick screed bed bedding layer in CM 1:4 for laying kota stone/floor tile in floor finishes complete all as specified .

M&L for 10 mm thick rendering layer in CM 1:4 for fixing slab/tile on vertical surfaces to fix vertical tiles complete all as specified and directed by Engineer-in-Charge.

M&L for 18-20 mm thick Kota stone laid over screed bed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polishing on floor complete all as specified . (size of kota stone shall not be less than 2'x2')

M&L for 18-20 mm thick Kota stone laid over rendering plaster and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and granite polishing on vertical surfaces complete all as specified .

M&L for 6 to 8 mm thick (square/ rectangular) non skid joint free colour ceramic floor tiles, area of each tile exceeding 0.11 sqm but not exceeding 0.18 Sqm (size not less than 400 mm x 400 mm) in floor set and jointed in neat cement slurry and pointed with colour cement with pigment to match the colour of tiles, complete all as specified .

All as per item no. 40 but on vertical surface such as skirting, dados etc.

M&L for 8 to 10mm thick (square) non skid colour heavy duity tiles (Endura or equivalent as approved) tiles of size 300mmX300mm, in floor complete all as specified .

M&L for 5 to 7 mm thick glazed ceramic colour tiles, coloured, of size 450 X 300 mm in vertical surfaces such as dado, skirtings, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the colour of tiles, complete all as specified.

M&L for 5 to 7 mm thick glazed ceramic tiles, coloured, of size 200 X 300 mm in vertical surfaces such as dado, skirtings, set and jointed in neat cement slurry and pointed with white cement mixed with pigment to match the colour of tiles, complete all as specified .

M&L Granite slab 18 to 20 mm thick (table rubbed and polished) in cooking plateform, window cills and like in cement mortar(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite and making round nosing in front portion complete all as specified . (size of kota stone shall not be less than 2'x2')

M&L Granite slab( table rubbed and polished) for wall lining (veneering to wall) 20mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified.

S&F in repair as in cup board shutters 18/19 mm thick prelaminated particle board,interior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination including 6mm thick lapping on open side, fixed with screws to timber frame work complete all as specified .

S & F 40 mm width of flap when open continuous (piano) hinges, mild steel, bright finish or electrogalvanised complete all as specified .

S&F 100 mm extruded aluminium alloy handles, fabricated type., anodised complete all as specified

S&F 100 mm Hasp and staple, stainless steel,or aluminium alloy , including bolt to hinge plate and fixed with screws complete all as specified .

Taking down galvanised tubing of 15 mm bore including cleaning for refixing in any position floor, wall etc, complete all as specified .

Taking down galvanised tubing of 20 mm bore including cleaning for refixing in any position floor, wall etc, complete all as specified .

S&F 15 mm bore medium graded galvanised steel tubing with all fitting and fixed complete to walls and ceiling or laid in floor, complete all as specified .

S&F 20 mm bore medium graded galvanised steel tubing with all fitting and fixed complete to walls and ceiling or laid in floor, complete all as specified .

Refixing 15mm bore old steel tubing and connections in new or old position (walls, ceiling, floors etc., complete all as specified .

Refixing 20mm bore old steel tubing and connections in new or old position (walls, ceiling, floors etc., complete all as specified .

Supply & Fixing in replacemetnt Rotational moulded (triple layered as per IS 12701) polyethylene water storage tank cylindrical vertical with closed top hoisted capacity 500 ltrs ISI marked with valid and fixed in position complete all as specified including dismantling and taking down existing old unserviceable PVC water tanks of any size complete all as specified .

Supply &Fixing in replacemetnt Rotational moulded (triple layered as per IS 12701) polyethylene water storage tank cylindrical vertical with closed top hoisted capacity upto 1000 ltrs ISI marked with valid CML No and fixed in position complete all as specifiedincluding dsmantling and taking down existing old unserviceable PVC water tanks of any size complete all as specified .

S&F 20 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed(Minmum weight 210 gms) complete all as specified .

S&F 25 mm bore ball valve high pressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipe and fixed(Minmum weight 210 gms)complete all as specified .

Cleaning and removing all scale and dirt etc from tanks exc 500 ltr and n.exc 1000 ltr capacity and from mouths of circulating pipe etc complete all as specified and writing date of cleaning on tank with paint.

Taking down of the pipe of PVC, AC, CI any description of any size, complete all as specified .

M&L for cast iron floor trap including jointing to waste pipes in cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate ,75mm bore outlet fixed in repair complete all as specified.

S&F 100 mm dia CP grating and fixing with white cement complete all as specified .

S&F cast iron soil waste and vent pipes and as in spout in any length with or without ears with lead joints fixed in wall or in floors using sand cast CI pipes 75mm bore pipes etc complete all as specified .

All as per item no 65 above but for 100 mm bore.

All as per item no 65 above but for 75mm bore but except pipe .

All as per item no 65 above but for 100 mm bore but except pipe.

S&F in repair CI bends Tee or Y-shape branches pieces of 75 mm dia complete all as specified.

S&F in repair 100 mm dia CI bends, Tee or Y- shape branches pieces complete all as specified .

Dismantling of brick work /stone work like items built in cement mortar including all quoins, arches pillars etc but excluding ashlar facings etc. complete all as specified including removing rubbish off the premises.

M & L for brick work with sub class bricks straight or curved on plan to any radious in half brick thick walls built in cement mortar (1:4) complete all as specified.

M & L for Brickwork with subclass ‘B’ bricks, straight or curved on plan exc 6m mean radius built in cement mortar (1:6) complete all as specified .

All as per item no. 73 but except bricks including cleaning bricks to remove mortar etc.

Taking down cement plaster on brick or stone walls, etc. including racking out joint, haccking for key, scrubbing with water, etc. complete all as specified and removing rubbish off the premises.

M&L for 10 mm thick rendering on fair faces of brick work or concrete on ceiling surface finished even & fair in CM 1:4, complete all as specified.

M&L for 15 mm thick rendering on other than fair faces of brick work or concrete surface finished even & smooth without using extra cement in CM 1:6,complete all as specified .

M&L for 15 mm thick rendering on fair faces of brick work, finished even & smooth without using extra cement in CM 1:4 , complete all as specified .

M&L for preparing new plastered surfaces of wall applying two coats of cement base paint over one coat of alkali resistant primer all as specified.

M&L for preparing old plastered surfaces of wall Complete removal of existing treatment and applying two coats of cement base paint complete all as specified including removing fungus,moss and scraping loose layer with scraper etc from wall with wire brushes etc as directed

M&L for preparing of new plastered surfaces of walls and applying two coat of oil bond distemper (exterior grade) over one coat of primer including 1mm thick exterior wall care putty complete all as specified .

M&L for preparing of old plastered surfaces of walls and Complete removal of existing treatment by scraping applying two coat of oil bond distemper(exterior grade) including 1mm thick wall care putty complete all as specified including removing fungus etc from wall with wire brushes etc as directed

M&L for preparing of new plastered surfaces of ceiling and applying two coats of white wash complete all as specified.

M&L for preparing of old plastered surfaces of ceiling and Complete removal of existing treatment applying two coats of white wash complete all as specified

M & L repairs to broken edges of roof projection ,chajja facia and simillars works girth n exc 30 cm with 15 mm thick plaster including dubbing coat in CM 1:3 and applying two coat of cement base paint complete all as specified .

M & L repairs to broken chajja and its edges ,facia and simillars works with 15 mm thick plaster including dubbing coat in CM 1:3 ,necessary concrete and form work, PCC benching over junction and wall and applying two coat of cement base paint complete all as specified .

S&F MS cover 0.56 mm sheet cover over PVC tank circular top cover for 500 litre capacity and clip type bolt for locking arrangement for side opening and suitable on over 50mm long nail with snap edge on top cover for protection from monkey complete all as specified .

S&F 5.5 mm thick sheet glass ordinary quality, exc. 0.50 Sqm in each pan, complete all as specified.

S&F helical door spring hinges mild steel with steel wire spring stove enamelled black 150mm size complete all as specified and directed by Engr-in-charge.

S&F 15 mm bore bib cock chromium plated cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe fixed in repair, complete all as specified .

S&F 15 mm bore concealed stop valve chromium plated cast copper alloy screwed down high pressure with crutch or butterfly handle screwed down both ends for iron pipe fixed in repair, complete all as specified .

S&F 15 mm bore Basin inlet connection ( Angular valve) with wall flange chromium plated screwed down both ends for iron pipe fixed in repair, complete all as specified .

S&F pillar taps, cast copper alloy, with capstan head chromium plated, screwed down high pressure with long shank and fly nut for 15 mm bore iron pipe, complete all as specified .

S & F in repair 15mm bore and 450mm long PVC connection pipe with PTMT nuts at both ends, complete all as specified .

S&F in repair vitreous china wash down closet (pedestal pattern), white (including seat cover but excluding flush pipe, flushing cistern) , including connection to trap and drain and flushing pipe anti-syphonage pipe, flushing cistern etc, complete all as specified .

S&F in repair vitreous china wash down closet squatting pan (Orissa pattern), of size 630X450mm, white (excluding flush pipe, flushing cistern) , including connection to trap and flushing pipe anti-syphonage pipe etc, making good to match the floor, complete all as specified .

S&F plastic water closet seat and cover, coloured, closed pattern with flat bottom and cover and mild steel chromium plated or aluminised hinging device, fixed in repairs, complete all as specified .

S&F white viterous china wash hand basin flat back, size 550 x 400mm including 32mm bore waste coupling, PVC down pipe of 32 mm bore incl brackets & fixed in repair complete all as specified .

S&F in repair grating 125mm dia stainless steel with or without waste hole ccomplete all as specified

S&F in repair 32mm bore PVC waste pipe for WHB, complete all as specified .

S&F for toilet paper holder recessed type stainless steel fixed in repairs complete all as specified .

S&F chromium plated shower roses with or without swivel joints, size 200mm dia incl fixing to steel pipe or union complete all as specified .

S&F chromium plated soap dish fixed to wall of size and shape as approved complete all as specified.

S & fixed in repair PVC low level flushing cistern 10 Ltr capacity syphonic action type , white with inlet ball valve float and handle including brackets complete and including PVC flush pipe 32mm dia low or high density for low level cistern complete all as specified.

S&F in repair cast copper alloy chromium plated 15 mm dia wall mixer complete complete all as specified .

S&F in repair cast copper alloy chromium plated 15 mm dia wash hand basin mixer complete complete all as specified .

S&F in repair chromium plated health faucet (ABS Body) for pedestal pattern WC screwed down high pressure complete all as specified .

S&F in repair chromium plated jet for pedestal pattern WC screwed down high pressure complete all as specified.

S&F in repair vitreous china urinal, half stall pattern, basin only including connections to flushing pipe and outgoing pipes complete all as specified .

M&L 75 mm thick PCC 1:3:6 type C2 ( using 40 mm graded stone aggregate) finished even & smooth without using extra cement as in plinth protection/path complete all as specified .

Dismantling of false ceiling boards (fibre,pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and removing from the site.

M & L for E- board tiles ceiling on GI powder coated channel/Tee/Grid of make (Armstrong ) or equivalent make as approved by GE frame work with the following specification including cutting holes in brick wall built in cement mortar & making good in cement concrete 1:2:4 type B-0 / Cement mortar 1:3 complete all as specified and directed with following:- (a) M & L Plugging to wall around the rooms & supplying & fixing GI powder coated angle of make (Armstrong or equivalent as approved by GE) of size 25 mm x 25 mm (b) S & F of 1.60 mm dia GI wire suspenders with adjustable clamps including fixing to ceiling dash free fasteners (c) S & F GI powder coated tee as in main & cross members at 595mm centre to centre to supported suspenders along with adjustable clamp to maintain level. (d) S & F E- board (Make-Everest Industries Limited or equivalent specified make as approved by GE) ceiling tiles of size 595mmx595mm and 4-5 mm thickness, confirming to relevant IS in squares of GI powder coated tee with clips made to shape, shade and pattern of PVC board shall be as approved by GE complete all as specified .

M&L Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing ® complete all as specified .

M & L for 40 mm thick mastic flooring for LPG GASS Godown,Composition qquility percentage bitumem 80 kg 44%.Course aggregate 40 kg 22%.Crushed stone aggregate 30 kg17%.Lime stone dust 30kg 17%.Bitumen shall be used grade of 10/20 or 90/15 Mastic flooring shall be conform to IS Specificaation of IS 1195 OF 1968.complete all as specified .

Dismantling of asbestos cement, corrugated or semi-corrugated sheets in roofs coverings including ridge complete all as specified and removing from the site.

M&L Pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified .

Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws complete all as specified .

Dismantling wrought iron or mild steel work for structural steel/ ceiling of any description not otherwise provided for, complete all as specified.

M&L Rolled Mild steel Fe 410-W(Gde-E- 250)quality-A, Roof trusses (framed), trussed,purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channelor flat sections) including distance pieces, cleats etc. , complete all as specified .

M&L for removing tree, plants from roots,from roof and wall of buildings and pouring suitable chemical as directed to avoid regrowth of tree, plants , shrubs and making good the surafce with PCC 1:2:4 , type B-1, or cement plaster of suitable thickness in CM 1:3, Complete all as specified and required at site including removing grass/shrubs from sides of tree/plant .For payment the plant shall be measured and paid

ABC CONSTRUCTION COMPANY

R K BROTHERS