Construction of Anti Poaching Camp at Hilekhunda under Kaziranga Range, Kohora

Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m.

Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete.

Providing and laying in position cement concrete of specified grade excluding the cost of centering, shuttering. All work up to plinth level. i) 1:3:6 (1 Cement:3 coarse sand (Zone-III):6 graded stone agrgregate 20 mm nominal size)

Providing and laying damp-proof course 40mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) derived from natural sources : 4 graded stone aggregate 12.5mm nominal size derived from natural sources)

Providing and laying in position specific grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement (i) 1:1.5:3 (1 cement:1.5 coarse sand (Zone-III) : 3 graded stone aggregate 20 mm nominal size

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement- 1:1.5:3(1 cement:1.5 coarse sand (zone-III): 3graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 150 landings, balconies shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1cement:1.5 coarse sand (zone-III): 3 graded stone aggregate 20mm nominal size)

Centering and shuttering including strutting, propping etc. and removal of form for Foundations, footings, bases of columns etc for mass concrete

Centering and shuttering including strutting, propping etc. and removal of form for suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc. and removal of form for Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc. and removal of form for Columns, Pillars, Piers, Abutments, Posts and Struts

Dry brick on edge flooring in required pattern with bircks of class designation 7.5 on a bed of 12 mm mud mortar, including filling joints with sand, with common burnt clay non modular bricks

Brick work with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in foundation and plinth in : Cement mortar 1:4 (1cement:4 coarse sand)

Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level . Cement mortar 1:4 (1 Cement: 4 coarse sand)

Cement concrete flooring 1:2:4 (1 cement:2 coarse sand: 4 graded stone agggregate) finished with a floating coat of neat cement, including cement slurry, but excluding the cost of nosing of steps etc. complete

62 mm thich cement concrete flooring with concrete hardener topping, under layer 50 mm thick cement concrete 1:2:4 (1 cement:2 coarse sand:4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thich cement hardener consisting of mix 1:2 (1 cement hardener mix: 2 graded stone aggregate, 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacture's specifications. This includes cost of ceent slurry, but excluding the cost of nosing of steps etc. complete.

12 mm cement plaster of mix: in cement mortar 1:4

15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:4 (1

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately)

Providing and fixing 35 mm thick factory made laminated veneer lumber door shutter conforming to IS:14616 and TADS 15:2001 (1) 12 mm thich plain grade -1, medium density flat pressed three layer particle board FPT-1 or graded wood particle board FPT-1, IS:3087 marked, onded with BWP type synthetic resin adhesive as per IS:848

Fixed to openings/wooden frames with rawl plugs screws etc

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccants, sealant (Both primary and secondary sealant) etc. as per specifications, drawings and direction of Engineer-in-charge complete

Prividing and applying white cement based putty of average thickness 1 mm, of approved brand and namufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface

Wall painting with acrylic emulsion paint of approved brand and manufacture to give and even shade: two or more coats on new work

Applying priming cost with ready mised pink or grey primer of approved brand and manufacture on wood work

Painting wood work with deluxe multi surface paint of required shade. Two or more coat applied

Finishing walls with Acrylic smooth exterior paint of required shade: New work (two or more coat applied including priming coat of exterior primer applied

Providing and laying Ceramic glazed floor tiles of size 300x300 mm t(thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand), Jointing with grey cement slurry including pointing the joints with white cement and matching pigment etc complete

Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement:4coarse sand) jointing with grey cement slurry @3.3 kg/Sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber maller for placing the tiles gently

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete up to plinth level. Mild steel and Medium Tensile steel bars

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Mild steel and Medium Tensile steel bars

Reinforced cement concrete work in walls (any thickness including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. above plinth level up to floor five level, excluding cost of centering, shuttering, finishing and reinforcement- 1:1.5:3 (1cement:1.5 coarse sand (zone-III): 3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams suspended floors, roofs having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1cement:1.5 coarse sand (zone-III):3 graded stone aggregate 20 mm nominal size)

Centering and shuttering including strutting, propping etc, and removal of form for: suspended floors, roofs, landings, balconies and access platform

Centering and shuttering including strutting, propping etc, and removal of form for: lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc, and removal of form for: Columns, Pillars, Piers, Abutments, Posts and Struts

Half brick masonary with common burnt clay F.P.S (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level- Cement mortar 1:4 (1 cement:4 coarse sand)

12 mm cement plaster of mix: in cement mortar 1:4

15 mm cement plaster on rough side of single or half brick wall of mix :1:4 (1cement:4 coarse sand)

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or dash fastener shall be paid for seperately)- Sal wood

Providing and fixing 35 mm thick factory made laminate veneer lumber door shutter conforming to IS:14616 and TADS 15:2001 (Part B), fixing with butt hinges of required size with necessary screws, all complete as per directions of Engineer-in-charge and panelling with panels of -12 mm thich of plain grade-I, medium density flat pressed three layer particle board FPT-I or graded wood particle board FPT-1, IS:3087 marked, bonded with BWP type systhetic resin adhesive as per IS:848

Providing and fixing M.S. grills of required patterin in frames of windows etc. with M.S. flats, square or round bars etc. including piming coat with approved steel primer all complete-fisxed to openings/wooden frames with rawl plugs secrews etc

Providing and fixing double glazed hermetically sealed glazing in aluminium windows, ventilators and partition etc. with 6 mm thick clear float glass both side, having 12 mm air gap, including providing EPDM gasket, perforated aluminium spacers, desiccant

Providing and applying white cement based putty of average thickness 1mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete

Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade-tow or more coats on new work

Applying priming coat with ready mixed pink or Grey primer of approved brand and manufacture on wood work (hard and soft wood)

Finishing with Deluxe Multi surface paint system for interiors and exteriors using Primer as per manufacturers specifications: Painting wood work with Deluxe Multi surface paint of required shade. Two or more coat applied

Finishing walls with Acrylic smooth exterior paint of required shade: New wor (Two or more coat applied)

Providing and laying ceramic glaxed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in colours such as White Ivory, Grey, Fume Red Brown, laid on 20 mm thich cement mortar 1:4 (1 cement: 4 Coarsesand), jointing with grey cement slurry including pointing the joints with whte cement and matching pigment etc complete

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level-Mild steel and Medium Tensile steel bars

Steel work in built up tabular (round, square or rectangular hollow tubes etc.) trusses etc including cutting, hoisting, fixing in position and pplying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete-Hot finished welded type tubes

Providing and fixing precoated galvanised iron profile sheets (xize, shape and pitch of corrugation as approved by Engineer-in-charge)0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 mircons minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge.

Reinforced cement concrete work in wassl (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc above plinth level up to floor fie level, excluding cost of centering, shuttering, finishing and reinforcement-1:1.5:3(1cement:1.5 coarse sand (zone-III):3 graded stone aggregate 20 mm nominal size)

Reinforced cement concrete work in beams suspended floors roofs having slope up to 150 landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement:1.5 coarse sand (aone-III):3 graded stone aggregate 20 mm nominal size

Centering and shuttering including strutting, propping etc, and removal of form for:Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including strutting, propping etc, and removal of form for:Columns, Pillars, Piers, Abutments, Posts ad Struts

Half Brick Masonery with common burnt clay F.P.S (Non modular) bricks of class designation 7.5 m above plinth level up to floor V level. Cement mortar 1:4

Plastering work 12 mm cement plaster of mix:In cement mortar 1:4

15 mm cement plaster on rough side of single or half brick wall

Providing and applying white cement based putty of average gthickness 1mm, of appproved brand and manufacturere, over the plastered wall surface to prepare the surface even and smooth complete

Water thinnable cement primer

Wall painting with acrylic emulsion paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Finishing walls with Acrylic Smooth exterior paint of required shade: New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm

Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thich cement mortar 1:4 (1cement: 4 coarsesand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc, complete

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level-Mild steel and medium tensile steel bars

Steel work in buile up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including, cutting, hoisting, fixing in position and applying a priming coat of approved steel primer including welding and bolted with special shaped washers etc complet -Hot finished welded type tubes

Providing and fixing precoated galvanised iron profile sheets (size, shape and ptich of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%) total coated thickness with zinc coating 120 grams per sqm as per IS:277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheeet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-in-charge.

Total civil works(A)=

Total for water supply and sanitation works(5%) on A, =(B)

Internal Electrification works 5% on Civil works on (A), =(C)

Contingencies 2% on A+B+C Sub Total=D

Grand Total E=