Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹25.4 LAccepted-AOC | L1 | Accepted-AOC LOWEST | |
| 2 | L2₹28.3 L+₹2.1 L (7.96%)Rejected-Finance | L2 | Rejected-Finance HIGHER | |
| 3 | L3₹28.5 L+₹2.3 L (8.61%)Rejected-Finance | L3 | Rejected-Finance HIGHER | |
| 4 | L4₹30.8 L+₹4.6 L (17.4%)Rejected-Finance | L4 | Rejected-Finance HIGHER | |
| 5 | L5₹31.6 L+₹5.4 L (20.4%)Rejected-Finance | L5 | Rejected-Finance HIGHER |
Tender Value
₹35 L
EMD Value
₹75,000
Closing Date
6 Sept 2022, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Amritsar
GE Amritsar PIN-143001
CERTAIN REPAIR TO JCOs/ORs FAFA ,JOGINDER SINGH ENCLAVE,SOMNATH ENCLAVE, HOSHIYAR SINGH ENCLAVE, INF AREA, THIMAYYA ROAD ETC AT AMRITSAR CANTT
2022_MES_544562_1
GE/ASR-41/2022-23
Open Tender
Civil Works
Item Rate
180 days
GE Amritsar
Class D category ai
8 documents required · 8 mandatory
₹500
GE Amritsar
₹75,000
Yes
15 Nov 2022
10 Aug 2022
7 Sept 2022
10 Aug 2022
6 Sept 2022
24 Aug 2022
Amount
Material and Labour for rendering 10 mm thick on fair face of brick works or concrete surfaces of walls with CM (1:6) finished the surface for even and smooth without using extra cement , including taking down cement plaster on brick or stone or concrete surfaces of wall and raking out joints , hacking for key, scrubbing down with water ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for rendering 15mm thick on other than fair face of brick works or concrete surfaces of walls with CM (1:4) finished the surface for even and smooth , including taking down cement plaster on brick or stone or concrete surfaces of wall and raking out joints , hacking for key, scrubbing down with water ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for Rendering 5mm thick in CM 1:3 to fair face of brick works or concrete surfaces of ceiling finished the surface for even and smooth without using extra cement , including taking down cement plaster on brick or stone or concrete surfaces of wall and raking out joints , hacking for key, scrubbing down with water ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for preparation of newly plastered surfaces of walls and applying two coat of cement base paint over a coat of cement primer etc. including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy ; complete all as specified and directed by the Engineer-in-Charge.
Material and Labour for preparation of newly plastered surfaces of walls and applying two coats of Oil Bound Distemper over a coat of cement primer etc. including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy ; complete all as specified and directed by the Engineer-in-Charge.
Material and Labour for preparation of newly plastered surfaces of Ceiling and applying Three coats of lime white washing on ceiling , chajjas ; including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy ; complete all as specified and directed by the Engineer-in-Charge.
Demolition of Brickwork or stone/boulder masonry, built in CM or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for brick work with sub Class 'B' old size bricks, straight or curved on plan exceeding 6 Metre mean radius, built in cement mortar 1:6 ; complete all as specified and directed by the Engineer in Charge.
Material and Labour for brick work but except bricks , using serviceable bricks obtained from demolition , straight or curved on plan exceeding 6 Metre mean radius, built in cement mortar 1:6 ; complete all as specified and directed by the Engineer in Charge.
Material and Labour for brick work with sub-class `B' brick straight or curved on plan to any radius in half brick thick walls built in CM (1:4) as in boundary wall, drain etc ; Complete all as specified and as directred by Engineer-In-Charge.
Demolition of Reinfoced cement concrete for roofs, floors,(other than ground floors) beams , stair cases, landing,chajjaa and similar suspended work ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for RCC with type B1 (1:2:4) (using 20mm graded crushed stone aggregate ) in Slabs supported on walls , beams and columns in floors , roofs ., landings, balconies , canopies, deck slabs and cover slab in shelves and the like ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for use & waste of Formwork to the soffits of suspended slabs such as roof slabs , floor slabs , landings and similar work ; not exceeding 200 mm thick ( Horizontal or sloping ) and making flat rough finished surfaces of concrete ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for TMT bars 6 to 8 mm mm dia and over , cut to length , bent to shape required , including cranking , bending spirally for hooping ends and binding with and including mild steel wire ( annealed ) not less than 0.9 mm dia or securing with clips ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing in repairs for 15mm bib tap standard of PTMT any colour fancy type long body high pressure screwed for iron pipe and fixed (minimum weight 15 mm- 105 gms) etc ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing in repairs for 15mm angle stop valve of PTMT any colour high pressure screwed for iron pipe and fixed (minimum weight 15 mm- 90 gms/20 mm-92 gms) ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing in repairs for 15mm angle stop valve of PTMT long shank & cup (concealed type) any colour high pressure screwed for iron pipe and fixed (minimum weight 15 mm- 90 gms/20 mm-92 gms) ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing in repairs for 100mm swivel type shower rose of PTMT with shower arm15 mm size, 195 mm long of any colour for fixing with 15 mm pipe ( min weight 40 gms ) ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing in repairs for 15mm Pillar taps,of PTMT any colour fancy type high pressure scewed for iron pipe and fixed ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing in Repairs for Vitreous China wash basin, white, flat back, size 500 X 400mm, excluding taps, waste, chain and plug and porcelain stopper but including brackets including cutting for and pinning in ends of brackets or erecting stand ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing in Repairs for 10 Ltrs capacity, PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets complete with all internal accessories and fixed to wall and jam nuts on both sides, PVC flush pipe 32mm dia 90cm long fixed properly to inlet of WC and making good to disturbed surfaces of wall or floor ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing in repairs for vitreous china squatting pan 'Orissa' pattern, size 580x440mm white, with integral foot rests (excluding flushing cistern and flush pipe)including connection to trap, and to flushing pipe, anti-syphonage pipe etccomplete including making good to floors with PCC bedding (1:5:10) type E2 using 40mm nominal brick ballast and connection to trap with cement mortar all as specified, and making good to floor including demilition of PCC / Lime concrete bedding existing pan ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing in repairs for Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) front or back inlet including connection to drain (or outgoing pipe) and to flushing pipe, anti-syphonage pipe, etc and making good to floor ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing in Repairs plastic water closet seat, white , closed patern withflat bottom and cover and mild steel chromium plated or aluminium hinging device ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing in rapairs sinks with drainage board made of stainless steel 1mm thick ss sheet for kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing in Repairs PVC waste pipe 32/38/40 mm dia, 600 to 750 mm long ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and fixing in Repairs stainless steel plate rack of size 1metre x 1metre, with folded edge gloss finish fixed to wall ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing in Repairs PVC connections 15mm size with PTMT nuts of length 450mm ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing in repairs for 40mm waste fittings, brass, chromium plated for glazed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed ; Complete all as specified and as directred by Engineer-In-Charge.
Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable rubbish off the premises ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for roughening surfaces of old concrete floor by picking, sweeping clean and washing down with water to remove dust, etc and brushing neat cement slurry with cement @ 3.0 Kg/Sqm ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for 15mm thick Screed bed or beading layer of cement mortar (1:6) for laying floor finishes ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for 10mm thick Screed bed or beading layer of cement mortar (1:4) for vertical surfaces like dado, skirting etc ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for Non-skid Ceramic colour tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for Non-skid Ceramic colour tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm,in skirting set and jointed in neat cement slurry and pointed in white or coloured cement to match ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for Glazed ceramic colour tiles in vertical surface 450x300x7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for 20mm thick Granite (of any tpe) work (table rubbed and polished) in steps, jambs, pillars, window cills,cooking platforms and like in CM(1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over 15 mm thick Screed in CM (1:6) ; Complete all as specified and as directred by Engineer-In-Charge.
Material & labour for 20-25mm thick machine cut kota stone slab flooring with Kota stone of size 580mm X 580 mm , laid & jointed with grey cement slurry mixed with pigment to match the shade of the slab ; over and including 20mm thick screed bed in cement mortar 1:6 , with & including cutting, rubbing and mirror polishing to the entire kota stone slab flooring with rubbing machine using suitable size of cutting stones to the entire satisfaction of the AGE , complete all as specified and directed by the Engineer-in-Charge.
Material and Labour for Sand filling under floors or in foundations including watering and consolidation ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-40 Grade ; Complete all as specified and as directred by Engineer-In-Charge.
Disconnecting , taking up or down steel water tubing and connections and Re-fixing the serviceable 15mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors etc) including cleaning, re-running the old screw threads etc including necessary excavation and earth work, cutting/ chasing in wall/ floor and making good disturbed surfaces in cement mortar 1:3 to the entire satisfaction of the engineer in Charge
Supply and fixing for galvanized iron steel tubing medium grade 15mm bore with all fittings and fixed Complete all as specified to walls, ceiling or laid in floor ; including disconnecting , taking up or down steel water tubing and connections including cleaning serviceable pipe for refixing and removal of unserviceable pipe, bore of pipe 15mm , including necessary excavation and earth work, cutting/ chasing in wall/ floor and making good disturbed surfaces in cement mortar 1:3 to the entire satisfaction of the engineer in Charge ; complete all as specified and directed by the Engineer in Charge.
Supply and fixing for galvanized iron steel tubing medium grade 20mm bore with all fittings and fixed Complete all as specified to walls, ceiling or laid in floor ; including disconnecting , taking up or down steel water tubing and connections including cleaning serviceable pipe for refixing and removal of unserviceable pipe, bore of pipe 15mm , including necessary excavation and earth work, cutting/ chasing in wall/ floor and making good disturbed surfaces in cement mortar 1:3 to the entire satisfaction of the engineer in Charge ; complete all as specified and directed by the Engineer in Charge.
Disconnecting , taking up or down steel water tubing and connections and Re-fixing the serviceable 20mm bore old steel tubing and connections in new or old position (Walls, ceiling, floors etc) including cleaning, re-running the old screw threads etc including necessary excavation and earth work, cutting/ chasing in wall/ floor and making good disturbed surfaces in cement mortar 1:3 to the entire satisfaction of the engineer in Charge
Supply and Fixing for 500 Litres capacity Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position with manhole cover of tank with its locking arrangement, making hole for inlet, outlet and overflow connection including dismantling / taking down old PVC water tank, ball valve etc complete all as specified in SSR Part-I ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing in Repairs for 20mm Ball valves high pressure of PTMT with epoxy coat ed Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 2 0mm-210gms) ; Complete all as specified and as directred by Engineer-In-Charge.
Taking down chowkhats or frame without taking of shutter from the frame of any description size not exceeding 1.5Sqm and removing from site ; complete all as specified and directed by the Engineer in Charge.
Taking down chowkats or frames with shutter’s (without taking off shutter’s from frame) exc 1.50 Sqm & nxc 4.00 Sqm each and removing from site ; complete all as specified and directed by the Engineer in Charge.
Taking down shutter any description of size exceeding 1Sqm and not exceeding 2Sqm and removing from site ; complete all as specified and directed by the Engineer in Charge.
Taking down shutters of any description exceeding 1Sqm & not exceeding 1.5Sqm each and refixing in the same opening ; complete all as specified and directed by the Engineer in Charge.
Supply and Fixing for framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, Doors etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete FE -290 Gde E-165 ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing 1.00 mm thick back sheet in steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and fixing factory made PVC door frame of size 100 mm x 45 mm with a wall thickness of 5 mm (+0.25) , made out of extruded 5 mm (+0.25) thick PVC sheet manufactured by asn ISO - 9001-2008 certified company, and by joining 3 Nos heat bent PVC sheet sections. The inside section of size 90 x 30mm shall be made from plain colour PVC sheet of 5 mm (+0.25) thickness. The inside section will be covered by sticking two sections of size 30 x 35 mm and 70 x 45 mm made from 5 mm (+0.25) thick plain PVC sheet. The frame shall be mitre cut at two corners and oined with 4 Nos of 150 mm long brackets of 15 mm x 15 mm square tube . The two vertical door frames are to be reinforced with 40mm x 20mm MS tube of 19 guage through out the frame . The door frame whslla be fixed to the wall using 8/100 mm long MS Screws through thee frame by using anchor fasteners. A minimum of 4 Nos of screws to be provided for each vertical member & minimum 2 Nos for horizontal member etc as per manufacturer's specification, ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for Providing 30mm thick " FACTORY MADE DOOR SHUTTER - WOOD FREE consisting of frame made out of M.S. tubes of 19 gauge thickness and size of 20mm x 40mm for stiles as well as top, bottoMaterial and Labourock rail. M.S frame shall have a coat of metal primer of approved make & manufacturer. The inside panel shall consist of 20mm thick multichamber hollow PVC section of 1 mm wall thickness, bonded using solvent cement / eynoacrylate adhesive with 5mm (+0.25) thick moulded PVC sheet of Density 600 Kg/Cbm Manufactured by an ISO-9001-2015 certified company with 2, 4, 6 raised panel design in plain/prelam colours after routing the moulded design on one side of the inside panel, 5mm (+0.25) plain/prelam PVC sheet to be pasted using solvent cement / cynoacrylate adensive on other side of the Hollow PVC section. All the four edge of the panel to be sealed with lipping of 10mm thick & 20mm wide PVC sheet baton (Made by sticking 02 Nos. foam PVC sheets of 5mm (+0.25) thickness using PVC solvent cement adhesive. Door edge lipping to be painted with PVC ink of matching colour of plain / prelam mouded PVC sheet of door. 20mm thick (5mm x 4 Nos) thick PVC sheet to be given for lock provision at lock height. Door to be fixed with frame with 3 nos. stainless steel but hinges of size 100mm *25mm*2mm and 50mm longsteel screws drilled suitable to pass through both the walls of M.S tube. other hardwares should be fixed with 25mm*8mm size steel screws etc, ; Complete all as specified and as directred by Engineer-In-Charge, manufacturer's specification and drawing.
Material and Labour for 30mm thick Glazed and skeleton shutter open rebated and prepare to receive glass, gauge etc (without sash bars) edges of framing plain chamfered or rounded fitted with cut and mitred beads for securing gauge etc size of members of shutters as specified in SSR part-I Section 8 and clause 8.24(a) of second class hard wood ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for Box type steel window double shutters (both Glazed & Gauzed shutters) made of ERW tube P - section of size 60 mm x 25 mm double rebated outer frame, comprises glazed skelton & gauzed shutter of ERW tube P-Section size 50mm x 20mm with one/two Nos openable leaf for each shutter consisting of two Nos Sashbar of T-section 20 x 3 mm welded to frame with one No verticle mullion of ERW box type T Section of size 60mm x 25mm and FI 2mm thick welded/screwed to frame for fixing of glass with & including Sheet glass, SS wire cloth, fittings and fixture like as Handle, Tower Bolt, Stopper, Cleat, Pintal hinges, holdfast etc as given below all as shown on drg No CEJZ/TD-1019/08 Sh 1/3 to 3/3 dt 01 May 2008 ; complete all as specified and as directed by the Engineer-in-Charge :- (a) Hold fasts 150mm long of 12mm x 3mm MS flat - 4 Nos per Window. (b) Handle of Z section 20mm x 25mm, 100mm long- 01 No per leaf. (c) MS tower bolt 150mm long - 02 Nos per leaf.(d) Z Section stopper 20mm x 25mm, 100mm long - 1 No per leaf. (e) Cleat 55mm long of hollow square 15mmx12mm - 02 Nos per leaf. (f) MS pintel hinges size 75mmx12mm - 2 Nos per leaf (g) MS Guard bars 10mm square bar @ 10Cm C/C fixed horizontaly. (h) 3mm thick clear sheet glass 3 nos per glazed leaf of reqd sizes glazing with oil putty. (j) Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples to each gauged shutters of window. (k) Filling hold fast blocks with PCC 1:2:4 type B1 (using crushed stone aggregate, minimum four number of each frame ) and (l) Repair all the damaged surfaces around window with plaster & other finishes to matches the surfaces with as per existing specifications complete.
Material and Labour for Box type steel ventilator made of ERW tube P-section of size 60mmx25mm outer frame (single rebated), comprises glazed shutter, frame of ERW tube and FI 2mm thick welded/screwed to frame for fixing of sheet glass with & including 3mm thick Sheet glass glazing with oil putty, MS Guard bars 10mm square bar @ 10Cm C/C fixed horizontaly, fixture and fittings like as Stopper, Cleat, Pintal hinges, hold fast etc all as shown on drg No CEJZ/TD-1019/08 sheet 1/3 to 3/3 dt 01 May 2008 , including Filling hold fast blocks with PCC 1:2:4 type B1 (using crushed stone aggregate, minimum four number of each frame ) and repair all the damaged surfaces around ventilators with plaster & other finishes to matches the surfaces with as per existing specifications complete.
Supply and Fixing 35 mm thick flush shutter, soild core construction, with block board core and plywood face panel commercial type on both sides ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing second class hard wood plain framed, panelled shutter 35 mm thick (any number of panel) with lock rail and panel of 9 mm B.W.P commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS: 1003 (Part I), kiln seasoned and chemically pressure treated ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing in repairs for framed work such as grill, framed guard bar and similer work conforming to FE 290, GDE E- 165 ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and fixing in Repairs stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and fixing 3mm thick ordinary sheet glass and glazing with oil putty or fixed with wooden beading, in squares not exc 0.50 Sqm in each panes, including hacking out old broken glass any thickness, size, quality or description from wooden frames or metal frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and fixing 3mm thich figured glass pin head type and glazing with oil putty in squares not exc 0.50sqm in each pane including hacking out old broken glass any thickness, size, quality or description from wooden frames or metal frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing 150 mm aluminum , anodised, barrel tower bolts of extruded section ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing butt hinges 100mm size medium weight cold rolled mild steel, fixed with screws or welded to steel frame ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing 150 mm aluminum Handle Cast type ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing 250mm aluminum alloy, anodised , sliding door bolt with hasp and staple ( bolt type ) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast aluminum alloy and fixed ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing MS 300mm ordinary rat tail rod pattern spring including roller and roller plate complete including necessary welding to door frame ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for preparation of new steel surface and applying two coat of synthetic enamel paint over one coat of red oxide primer on new surface including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy ; complete all as specified and directed by the Engineer-in-Charge.
Material and Labour for preparation of new wood surface over 10 cm girth or width and apply two coat synthetic enamel paint over a coat of pink primer including cleaning of windows, doors, internal fittings & any other surfaces by removing splashes / spots after finishing the job and leaving premises, clean and tidy ; complete all as specified and directed by the Engineer-in-Charge.
Material and labour for factory made cup board shutter, frame made of angle iron 35x35x6mm, covered with 1.00mm thick MS sheet, welded to frame including suitable handle, lugs and locking arrangement ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and fixing in repairs solid PVC sheet 5mm thick, in backside of kitchen cabinets for support ; Complete all as specified and as directred by Engineer-In-Charge.
Supply & fixing 18 mm thick solid PVC ply of 1st quality of apprvoed colour fixed with screws, solvent cement / adhesive to make kitchen cabinate, shelves and cupboard shutters/shelves ; complete all as specified and as directed by the Engineer-in-Charge.
Supply & fixing 18 mm thick solid PVC ply of 1st quality with one side prelam of any shade plain colour fixed with screws, solvent cement / adhesive to make kitchen cabinate, shelves and cupboard shutters/shelves ; complete all as specified and as directed by the Engineer-in-Charge.
Supply and Fixing in repairs for 40mm long box type steel hinges spring action type ; Complete all as specified and as directred by Engineer-In-Charge..
Supply and Fixing in repairs for 75-80mm long stainless steel handle ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for providing PCC 1:2:4 type B-1 ( using 20 mm graded stone aggregate ) for fixing of hold fast ; Complete all as specified and as directred by Engineer-In-Charge.
Demolition of cement concrete in ground floors and pavings (unreinforced) n.exc 15 cm thickness (below or above ground level) ; Complete all as specified and as directred by Engineer-In-Charge.
Material and labour for 20-22mm thick precoated chequered cement concrete tile of size 20cm x20cm over and including 15mm thick cement screed in CM 1:6 set and jointed in neat cement slurry and pointed with grey cement mixed with pigment to match the colour of tiles ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for 50mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinths protection, path and floor surfaces finished even & fair without using extra cement ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and fixing in repairs for 25mm dia MS pipe PVC sheathed, decorative fancy type, curtain rod including brackets & a set of ABS finials ; Complete all as specified and as directred by Engineer-In-Charge.
Dismantling of 100/75 mm bore cast iron or reinforced concrete drain pipes, jointed in cement mortar and taking out of floor/trenches, if required ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing in Repairs 110 mm bore PVC (SWR ) pipes single socketed, in any lenth with rubber ring fixed to wall ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing PVC (SWR) bend 110 mm size ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing 110 mm bore PVC (SWR) single Tee ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing 75 mm PVC (SWR) floor trap, plain with grating including jointing with solvent cement ; Complete all as specified and as directred by Engineer-In-Charge.
Dismantling brick tiles or terracing tile, single/double layer on roof including mud phuska any thickness and leepng plaster, seggregating, cleaning and stacking servicable tiles for reuse ; Complete all as specified and as directred by Engineer-In-Charge.
Demoliton of mud in roof any thickness including mud plastering and removing to distance exc 250m but n exc 500m ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for 40mm thick brick tiles, laid on and including 15 mm thick cement mortar 1:6 and joints grouted and pointed flush in CM 1:3 mixed with 5% crude oil by weight of cement ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for 40mm thick brick tiles,but except brick tiles laid on and including 15 mm thick cement mortar 1:6 and joints grouted and pointed flush in CM 1:3 mixed with 5% crude oil by weight of cement ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for PCC (1:3:6) type C-0 (using 12.5mm graded stone aggregate) averaging 50 mm thick as in roof padding mixed with & including WPC @ 100ml per 50 Kg cement finishing the surface even and smooth without using extra cement ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for 15mm thick plaster in CM (1:3) on RCC roof surfaces as in vertical surfaces mixed with water proofing liquid compound finished the surface even and smooth without using extra cement complete all as specified & directed. (Note : WPC shall be mixed @ 100 ml / 50 Kg bag of cement or as recommended by manufacturer and the same shall be measured and paid seperately ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for applying evenly a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for cleaning of dust & dirt , removal of all loose dirt / material & applying heat torch gun over bitumen to get smooth plain finished surface and providing & applying APP based polymeric membrane minimum weighing 3Kg/Sqm and minimum 3mm thick reinforced with polyster non woven fabric ( Wt not less than 150 gms /sqm ) laid on bituminous surfaces by forced application over entire roof area, sunken portion with overlapping 100mm to eiher side ; complete all as specified and directed by the Engineer in Charge.
Demolition of cement Concrete in sunken floors exc 15cm thick ( above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for Cement concrete (1:2:4) type B-0 using 12.5mm graded stone aggregate as in sides of sunken slab benching etc including necessary form work ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for Rendering 15mm thick cement plaster as in sunken portion in cement mortar 1:3 using with & including water proofing compound, finished fair and even without using extra cement ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing in repairs for 40mm bore steel water tubing grade galvanised inserted at the end of lateral slope projecting atleast 25cm beyond the outermost part of the building below the drain pipe up to two storey construction as spout for sunken, and all joints should be sealed properly by epoxy sealent ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for Water proofing treatment to sunken floor including wall comprising with the following course of treatment/ specification from bottom to top. (a) Applying bituminous primer @ 0.40 ltrs per sqm over plastered surface of floor for treating the sunken floor all as specified & as directed by Engr-in-Charge. (b) Apply a coat of hot bitumen 85/25 penetration grade bitumen @ 1.20 kgs/Sqm. (c) One layer of 3mm thick APP film based poly meric membrance minimum weighing 3Kg per Sqm reinforced with polyester non wove fabric (weight not less than 150 gms/sqm) land on primed surface by forced application over entire area, ; Complete all as specified and as directred by Engineer-In-Charge. Note:-(i) After plastering testing tobe carried out by ponding (For 48 Hrs) and any leakage/Seepage observed shall be rectified before water proofing treatment. (ii) Laying of APP membrane shall be done as per manufracturers instructions . (iii) Joints tobe touched hot and Minimum width of overlaps not less than 150mm.
Material and Labour for Plain cement concrete (1:5:10) type E-2 using 40mm graded stone aggregate as in sunken filling as mass concrete or in sub base of floors ; Complete all as specified and as directred by Engineer-In-Charge.
Raking out joints/pointing to brick work or brick tiles, 30cmX15 cm laid flat, in floor , surface channels, roofs etc ; Complete all as specified and as directred by Engineer-In-Charge.
Material and labour for flush pointing in cement mortar (1:3) to brick 30cm X 15cm laid flat in pavings or brick on edges or brick tiles in paving ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and Fixing in Repairs Brass chromium plated Tubular towel rail 20mm dia, D type, 60cm long between flanges ; Complete all as specified and as directred by Engineer-In-Charge.
Material & Labour for Prime the surface with tarfelt LM or equivalent make of approved by GE mixed with portable water in the ratio 1:1 and apply @400gm per sqm(As per surface condition) Apply first coat of tarfelt LM or equivalent make of approved by GE having elongation 200% confirming to ASTMC-412 & having crack binding of 8 mm confirming to astm-836 with tensile strength after 7 days 0.5 mm confirming to ASTM C-412with no diluation of water on primed surface while the surface is still tacky with consumption @700 gm per sqm. Lay Geotex of 45 GSM/Fiber mesh simultaneously and paste iot properly with overlap of 500 mm Allow the first coat of dry for 10 to 12 hrs. Apply second coat on cured first coat with consumption @ 700Gm per sqm in opposite direction of first coat by Brush of roller. Allow it to dry for 10-12 hrs after apply third coat with consumption @ 700Gm per sqm Ensure final curung time of 36 hrs before allowing /Carrying out any further work conduct ponding test after min 7 day applying two coats of U V resistans Elastomeric Exterior Acrylic weather resistance water proof coating of Shalicryl-215 of equivalent make of approved by GE having alongation of 300%after curing of 14 daysconfirming to ASTM D-6083 for U V Protection of Bituminous Elastomeric Acrylic Emulsified liquid membrane of Tarfelt LM or equivalent make of approved by GE to give long life and prevent its deteriorration ; Complete all as specified and as directred by Engineer-In-Charge.Note:- Work will be paid after recieving of Manufacturer Garranty certificate.
Supply and Fixing in repairs for 140 mm Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor ; Complete all as specified and as directred by Engineer-In-Charge.
Material and Labour for 75 mm thick PCC ( 1:4:8) type D-2 using 40mm graded stone aggregate as in sub-base surfaces finished even & fair without using extra cement ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and fixing in Repairs stainless steel wire cloth 0.56 mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or stainless steel wire staples ; Complete all as specified and as directred by Engineer-In-Charge.
Supply and fixing 3mm thick ordinary sheet glass and glazing with oil putty or fixed on steel frames, in squares not exc 0.50 Sqm in each panes, including hacking out old broken glass any thickness, size, quality or description from wooden frames or metal frame or stone, concrete or brick surrounds, glazed with putty or fixed with beads ; Complete all as specified and as directred by Engineer-In-Charge.
ESS KAY BUILDER
m/s. gopal krishan
m/s inder construction co
amardeep traders
M/S RASHPAL CONSTRUCTION CO
B.J.CONSTRUCTION CO
MAAN ENTERPRISES
stage.html
html • 0.06 MB
tech_bid_open.pdf
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.PDF
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .