COMPREHENSIVE REPAIR/MAINT TO JOINERY, FLOORING, PLUMBING, SANITARY FITTINGS, PLASTERING, BRICK WORK AND OTHER ALLIED WORK IN OFFRS MD ACCN UNDER AGE BR-I OF GE (WEST) PATHANKOT (2ND CALL)

Amount

Taking down chowkhats or frames exc 1.50 but n.exc 4 Sqm each (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkat or frames with shutters (without taking off shutters from the frames) area not exc1.5 Sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description exc 1 sqm above but not exc 2 sqm each and removing from site complete all as specified and directed.

Taking down shutters of any description not exc 1 sqm each and removing from site complete all as specified and directed.

S & F pressed steel frames 105 x 60 x1.25 mm with one or more rebates including necessary fixing lugs/hold fast duly tarred with bitumen and sanding with sharp clean sand, hinges, lock strike plate & applying two coats of synthetic enamel paint including one shop coat of primer complete all as spd and directed

All as per srl item no 5.00 here-in-before but Size of frame 125 x 60 x1.25 mm.

All as per srl item no 5.00 here-in-before but Size of frame 165 x 60 x1.25 mm.

M & L for cement concrete type C-0, 1:3:6 using 12.5 mm graded crushed stone aggregate as in back filling of hollow portion of frame with plain cement concrete and for fixing of hold fast complete all as specified and directed.

S & F of 2nd class hardwood Plain, solid, straight, chowkats & frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints including preparation of Surfaces & applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

S&F of Solid PVC Door Frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing complete all as specified and directed.

All as per srl item no. 10.00 here-in-before but wood grain printed PVC sheet used instead of Plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed.

S&F of Factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail,lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, supplying & fixing in the frame at site as per specification & drawing complete all as specified and directed.

All as per srl item no. 12.00 here-in-before but wood grain printed PVC sheet used instead of Plain colour PVC sheet & 5mm thick x15mm wide PVC sheet beading used inside stiles and rails and decorative PVC beading of 10mm x 10mm (900 ) used instead of exposed portion of PVC sheet beading complete all as specified and directed.

S&F factory made fully glazed/wire gauge single piece front side PVC printed door shutter 35 mm thick (style) consisting of frame made out of mild steel tubes for top and bottom rails. Mild steel frame shall be covered with heat moulded plain colour pvc "c" channel having a pvc sheet strip of 20 mm width stuck inside with solvent cement for stiles & pvc laminated sheet for top rail, lock rail & bottom rail on either side and gap insert for top rail and bottom rail; punching of pre-laminated sheet to be fitted in the mild steel framed welded/sealed to stiles & rails fixed with PVC sheet beading and jointed together with solvent cements. supplying and fixing in frame as per drg No-CEPZ/TD-378/11 SHEET 1/1. The rate include for Stainless Steel wire gauge of 24 gauge to be fitted inside area of stiles and rails all as specified and directed.

M&L factory made 35mm thick of 2nd class hard wood Glazed and skeleton door shutters, open rebated and prepared to receive glass, gauze, etc. (without sash bars), edges of framing plain ,chamfered or rounded. fitted with cut and mitered beads for securing glass ,etc.; sizes of members of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats,kiln seasoned, chemically pressure treated including preparation of Surfaces and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

S & F 30mm thick 2nd class hard wood Glazed and Skelton shutters, open rebated and prepared to receive glass, gauze etc (without sash bars), edges of framing plain, chamfered or rounded fitted with cut and mitered beads for securing glass etc. size of members of shutters as specified in SSR Part-I, Section 8, clause 8.24 (b) supplied and fitted to chowkats,kiln seasoned, chemically pressure treated including preparation of Surfaces and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

S & F of Steel window/Ventilator factory made out of box type for double shutter i.e glazed & gauged shutter with sash bar made out of hollow section using flash above butt welding, hinges shall be provided to both shutters complete including grills 10 mm square bar, tower bolt, handle, peg stay etc , glazing (plain/figured glass pane 3mm thick) , gauging (GI wire mesh) and two coats synthetic enamel paint over and including a coat of red oxide primer, tarred hold fast, fixed in wall in PCC 1:2:4 type B-1, 1:2:4 (using 20 mm graded crushed stone aggregate) all as per drg No CEPZ/TD/245/01 Sh 1/1, CEPZ-TD/246/01 Sheet 1/2 and Sheet 2/2 including taking down existing spoiled and unserviceable windows/ventilators of any type ( wooden/steel) complete all as specified and directed.

S&F Factory Made 35mm thick Plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated including preparation of Surfaces and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

S&F 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides including preparation of Surfaces and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

M & L for 35 mm thick factory made High density fiber panel board (HDF) door shutter as per details shown in drawings No. CEPZ/C-TD-037/13 sheet 1/2 & 2/2 & CEPZ/C-TD/039/13 sheet 1/2 & 2/2 respectively. Irrespective of whatever shown on drgs, the HDF door shutter (rails, stiles and core filling) shall be of timber having minimum bulk density of 450 Kg/m3 at 12 percent moisture content. The raised fibre board skin used in door shutter shall be of minimum thickness 3mm of phenolic bonded high density fiber board conforming to the requirements give in table-2 of IS-15380-2003. HDF door shall conform to IS: 15380-2003 and in any of the make mentioned in list of products as approved by GE.

S&F of Factory Made Solid PVC Moulded Door Shutter (With Wood free EPS), 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, supplying & fixing in frame at site as per specification & drawing

All as per srl item no. 21.00 here-in-before but 2mm thick Moulded Prelam PVC Sheet on the front face & 2mm Plain colour PVC Sheet on back face.

S &F for stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or using metal nut and bolts complete all as specified and directed.

S &F for in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples or using metal nut and bolts including wooded Beading/MS fillets, nuts and bolts, nails, screws, drilling/welding all as required at site complete all as specified and directed.

M&L for 18/19mm thick Prelaminated particle board, exterior grade, prelaminated one side with decorative choice lamination & other side balancing white lamination, fixed with screws to timber frame work as in shutters & shelfs of Kitchen cabinet, cupboard, partition & almirahs etc including taking down existing shutters,shelfs/ boards /cabinets etc complete all as specified and directed.

M&L for in repair for 18mm thick prelaminated medium density fibre board(one side decoratve and other side balancing white), exterior grade adhesive shutters & shelfs of Kitchen cabinet,cupboard & almirahs,partition etc fixed with screw/ nails including 4mm thick teak wood lipping duly french polished alround including taking down existing shutters,shelfs/ boards /cabinets etc complete all as specified and directed.

M&L for shutters & shelfs of Kitchen cabinet, cupboard, partition & almirahs etc made of HDR board 18 mm thick water proof and termite proof duly banded taping 0.80 mm thick cut to shape and size including taking down existing shutters, shelfs/ boards /cabinets etc complete all as specified and directed.

M&L for 18 mm thick UV board duly edge bonded with 0.8 mm thick PVC taping as in shutters & shelfs of Kitchen cabinet cupboard & almirahs etc including taking down existing shutters ,shelfs / boards /cabinets etc complete all as specified and directed.

S & F in repair second class hard wood plain fillets, square, rectangular or triangular in section, and secured with nails or screws, clean sawn and sectional area exc 13 Sq cm and not exc 25 Sq cm including two coats of synthetic enamel paint over and including one coat of pink primer complete all as specified and directed.

All as per srl item no 29.00 here-in-before but sectional area exc 03 Sq cm and not exc 06 Sqcm.

S & F in repair for anodised aluminum frame for partition / doors / windows / ventilators /sliding shutters etc with one or more rebates including joining cleat for fixing etc. complete all as specified and directed.

All as per srl item no 31.00 here-in-before but powder coating of any colour (minimum thickness of powder coating 50 micron)

S & F for Anodised aluminum door shutters, aluminum section weighing 0.55 kg/m including necessary joining cleats glazing clips, rubber neoprene packing, anodised aluminum snap beading screwsn 150mm size handles 2 nos and 100mm size hinges type B-21- 3 nos in each shutter etc. complete all as specified and directed.

All as per srl item no 33.00 here-in-before but powder coating of any colour (minimum thickness of powder coating 50 micron)

S & F of Anodised aluminum window and ventilator shutters, fixed type without sash bar,fixed/sliding/rolling type, aluminum section weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminum snap beading, screws etc. complete all as specified and directed.

All as per srl item no 35.00 here-in-before but powder coating of any colour (minimum thickness of powder coating 50 micron)

S & F of Anodised aluminum window and ventilator shutters, side hung type without sash bars, aluminum sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminum fittings such as peg stays 150mm long (1 no.). hinges type B-21100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed.

All as per srl item no 37.00 here-in-before but powder coating of any colour (minimum thickness of powder coating 50 micron)

S&F for 4mm thick aluminum composite panel (coloured sheet) and in additional other accessories for fitting in aluminum partition / doors / windows / ventilators /sliding shutters etc complete all as specified and directed.

S & F of powder coated (powder coating not less than 50 micron) anodised designer grill (weight of grill shall not less than 2.00 KG/Sqm) of 07mm dia and aperture of 75mmx75mm fixed with and including aluminum flat section of size 50 x 1.5 mm fixed to aluminium windows Complete all as specified and as directed.

S & F for door closer Aluminum (extruded section body) hydraulically regulated, designation No. 2, universal type, suitable for door shutters of 701 to 850 mm in width and of weight between 36 to 60kg and fixed complete all as specified and directed.

S & F in repair for Ball catches with 8mm dia steel ball, and brass body and striking plate including letting in and fixed complete all as specified and directed.

S & F for 40mm dia, cupboard knobs with nut, screw & washer of brass, polished complete all as specified and directed.

S &F for hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws, Size of hasp and staple in mm 100 complete all as specified and directed.

S & F in repair for 100mm size Hasp and staple, safety type, brass with mild steel hinge pin including bolt to hinge plate and fixed with screws complete all as specified and directed.

All as per srl item no 46.00 here-in-before but made of aluminum anodised.

S & F for Continuous (piano) hinges, mild steel, bright finish or electro galvanised with width of flaps (When open) 30 mm complete all as specified and directed.

All as per srl item no 48.00 here-in-before but made of Brass.

S & F in repair for Continuous (piano) hinges, mild steel, bright finish or electro galvanised Width of flaps (When open) 30mm complete all as specified and directed.

All as per item no 50.00 here-in-before but made of Brass.

S & F for Aluminum alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed.

S & F in repair for Mild steel sliding door bolts 250mm long, plate type, stove enamelled black, with bright bolt not less than 12mm dia with & including a minimum of 6 bolts & nuts, four on bolt plate & two on staple plate complete all as specified and directed.

S & F in repair for Brass, sliding door bolt 250mm long with sand or die-cast brass hasp, staple (bolt type) & fixing bolt with rolled or drawn brass bolts complete all as specified and directed.

S & F in repair for Aluminum alloy, anodised, sliding door bolt 250mm long with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded sections or cast aluminum alloy complete all as specified and directed.

S & F for 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete including welding to steel frames complete all as specified and directed.

S & F in repair for 300mm, mild steel ordinary rat tail rod pattern springs including roller and roller plate complete including welding to steel frames complete all as specified and directed.

S & F for stainless steel butt hinges of size 100mm long for fixing to pvc door shutter etc complete all as specified and directed.

S & F for butt hinges medium weight 75 mm cold rolled mild steel complete all as specified and directed..

S & F of butt hinges medium weight 100 mm cold rolled mild steel complete all as specified and directed..

S & F in repair for 100 mm long butt hinges medium weight cold rolled mild steel and fixed or welding to steel chowkhats complete all as specified and directed.

S&F in repair for 75 mm long above butt hinges medium weight cold rolled mild steel and fixed or welding to steel chowkhats complete all as specified and directed.

S&F of aluminum, anodised, barrel tower bolts of extruded section and fixed, Length of bolt 150mm complete all as specified and directed

S &F of aluminum, anodised, barrel tower bolts of extruded section and fixed, Length of bolt 200mm complete all as specified and directed

S &F of in repair aluminum, anodised, barrel tower bolts of extruded section and fixed, Length of bolt 150mm complete all as specified and directed

S &F of in repair aluminum, anodised, barrel tower bolts of extruded section and fixed, Length of bolt 200mm complete all as specified and directed

S & F of Extruded aluminium alloy handles, fabricated type, anodised 100mm size complete all as specified and directed.

S & F of Extruded aluminium alloy handles, fabricated type,anodised 150mm size complete all as specified and directed.

S & F in repair for 100mm long Extruded aluminum alloy handles, fabricated type anodised complete all as specified and directed.

S & F in repair for 150mm long Extruded aluminum alloy handles, fabricated type anodised complete all as specified and directed.

S & F of Floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring,fixed in floor overall length of cover plate 140mm complete all as specified and directed.

S &F of in repair Floor door stopper of aluminum alloy body and tongue, anodised, with hard drawn steel spring Fixed in floor, overall length of cover plate 140mm complete all as specified and directed.

All as per srl item no 72.00 here-in-before but of brass body and tongue with hard drawn steel spring.

S & F 25mm outer dia stainless steel bright finished, fancy type decorative drapery rod of thickness 20 gauge with stainless steel heavy duty brackets & ends caps in (pair) fixed to wall with screws, PVC gutty including all necessary fixing arrangement including taking down old curtain rod & bracket and making good to match the existing surface complete all as specified and directed

S&F in repair powder coated aluminum body rubber door cill strip at bottom rail of door to stop entry of insect inside the room, shape rectangular, brush type polypropylene, water resistant to seal the gap between door and floor fixed with screw/nail complete all as specified and as directed.

Hacking out old broken glass ( any thickness, size, quality or description ) from wooden frames or stone concrete or brick surrounds, glazed with putty or fixed with beads complete all as specified and directed.

M&L for 4 mm thick Sheet glass, ordinary quality and glazing with oil putty in square in not exc 0.5 sq.m in each pane if required fixing with MS beading 10mmx01mm including welding & glazing pins upto four story building complete all as specified and directed.

All as per srl item no 77.00 here-in-before but area exc 0.5 sqm in each pane.

M&L for 4mm thick figured glass, pin head type and glazing with oil putty in square not exc 0.5 sqm in each pane if required fixing with MS beading 10mmx01mm including welding & glazing pins upto tripple story building complete all as specified and directed.

Running welding in repairs thickness of metal to be welded exc 6mm above but n exc 9mm complete all as specified and directed. Note:- The work will be in carried out in patches complete all as specified and directed.

Welding in repairs exc 2.5cm above but n exc 5cm in length thickness of metal to be welded exc 6mm above but n exc 9mm complete all as specified and directed. Note:- The work will be in carried out in patches as directed.

M&L for Repairs (matching with existing work) to existing wooden articals i.e. doors,windows,CB shutters,shelf,kitchen cabinet,Showcase items of any description including taking down existing shutter/shelf and resecuring or easing ,adjusting,tightening, adjustement of all builders hardware glass pane,wire mess etc in old/new postion & refixing shutter/shelf in old position by providing nails,screws or welding for properly closing/opening complete all as specified and as directed.

M&L for Repairs (matching with existing work) for Easing to any type steel windows/ventilator by repair / replacing the rusted items of windows (of any shape & size) like handles, stays, projecting type hinges/ friction / box type hinges to make in proper smooth functioning by providing all necessary fittings, fixtures, oiling and welding etc where as required at site,including preparation of surface & applying two coats of synthetic enamel paint over and including one coat of red oxide primer complete all as specified and as directed.

M&L for Repairs (matching with existing work) of any type/coloure of aluminium articals i.e. doors, windows, CB shutters, shelf, kitchen cabinet, Showcase items of any description including taking down existing frame,shutter,shelf and resecuring or easing ,adjusting,tightening, adjustement of all builders hardware glass pane,wire mess by replacing of joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc in old/new postion & refixing shutter/shelf in old position for properly closing/opening complete all as specified and as directed.

S &F in repair framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe.290.Gde-E-165 complete all as specified and directed.

M&L for preparation of new steel and iron surface of any description width or girth exc 10 cm and applying two coats of synthetic enamel paint over and including a coat of red oxide primer complete all as specified and directed.

Dismantling of Wall and ceiling boards (fibre, pulp, insulation, etc.) or insulation boards/slabs/blankets, any thickness, including cover fillets & grid system complete all as specified and directed

S & F suspended false ceiling system using chicago metallic (E grid)exposed suspended system, grid section size 600mm x 600mm comprising of GI powder coated Main Runner of dimensions 'T' section 39 mm x 24mm x 0.8mm thick (thickness comprising of GI/0.4+ PPPCGS/0.3mm & weight of runner 1.35 kg for 3600mm length) Cross Tee of dimensions 29mmx24mmx0.8mm thick and wall angle 22.2mmx22.2mmx 0.65 mm thick ( thickness comprising of GI/0.35+ PPPCGS/0.3mm & weight of angle 0.70 kg for 3050mm length)with and including 4mm thick HPSC(High pressure steam cured) pre-primed, self embossed, textured designer board, water resistant termite resistant, fire resistant for insulation and acoustic purpose to be placed in the grid system duly suspended with 4mm dia GI bar hangers fixed with steel dash through fasteners from purlins of the roof with above butterfly clips (Wt-0.007 Kg/clip) hold down clips (Wt-0.0035 Kg/clip) with Provn of light fixture if required at site complete all as specified and directed

S & F in repair for 4mm thick HPSC(High pressure steam cured) pre-primed , self embossed . textured designer board, water resistant termite resistant , fire resistant for insulation and acoustic purpose to be placed in the old/existing grid system complete all as specified and directed

Dismantling structural steel work including doors gates, grills above but excluding framed truss etc complete all as specified and directed.

S &F of rolled sections hollow section as in main and cross beams, hip and jack rafters; purlins where connected to a common rafters and rails and guides for sliding doors; and supports to roof covering,sun-shades etc fixed with angle cleats or other connecting plates Fe-410-W(Gde-E-250) quality B complete all as specified and directed.

Dismantling of plain or corrugated steel sheeting, any gauge, thickness, including nainital or similar pattern roof covering from sunshades etc complete all as specified and directed.

S & F of pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in sunshades ,roof covering, cladding to wall etc fixed with self tapping screws complete all as specified and directed. Note :- Gap between wall and galvalume sheet is to be filled in cement concrete type B-1, 1:2:4 (using 20 mm graded stone aggregate) & Cutting grooves 75 mm wide & 65 mm deep in stone/brick/concrete wall by mechanical cutter only shaping horizontal face of groove without any extra cost.

Dismantling of AC/fibre glass reinforced translucent corrugated or semi corrugated sheeting in roof including ridges from sunshades etc complete all as specified and directed.

S&F of fibre glass reinforced translucent corrugated sheeting 2mm thick with two corrugations side lap fixed with L type or J type cranked hook bolts or coach screw & washer complete all as specified and directed.

All as per srl item No. 95.00 here-in-before but plain sheets.

Taking up or down 15mm bore, steel tubing and connection complete all as specified and directed.

Taking up or down 20mm bore, steel tubing and connection complete all as specified and directed.

S&F of 15mm bore Steel water tubing 'medium grade', galvanised with all fittings such as bends, elbows, tees, short pieces, connectors, back nuts, reducer, diminishing pieces, caps, plugs and unions etc in new or old position and fixed to wall, ceiling or laid in floor complete all as specified and directed.

All as per srl item no 99.00 here-in-before but 20mm bore Steel water tubing.

Cleaning and refixing 15mm bore old steel tubing and connections with all new GI fittings such as bends, elbows, tees, short pieces, connectors, backnuts,reducer,diminishing pieces, caps, plugs and unions etc in new or old position (Walls, ceiling,floors, etc) complete all as specified and directed

All as per srl item no 101.00 here-in-befor but 20mm bore old steel tubing.

Cutting chases in brick walls, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, shelves, lintels, etc, and cutting chases for concealed water tubing or conduit wiring, etc and making good, cutting not exceeding 10cm girth complete all as specified and directed

Disconnecting existing tanks of capacity exc 250 & n exc 1000 liters setting aside (or lowering,hoisting if required) for repairs & scrubbing cleaning, thoroughly removing all scale and dirt, mud sediments, silts etc from the internal surfaces of PVC/RCC water storage tanks (bottom and wall) by using brushes, bleaching powder and other cleaning materials as required and removing vegetation around the over head tank after opening tank cover,inlet,outlet etc and reconnecting with GI tubing and re-fixing in position ,refixing the cover after cleaning complete all as specified and directed. Note: While cleaning Any CI/GI/PVC pipes and fittings, Float valve damaged during work shall be replaced by new one to insure leakage / seepage free joint without any extra cost to the department and Unit rate quoted by tenderer shall included for use of all scaffolding, protective measures etc up to four storeys height of bldgs.

S&F of Rotational moulded polyethylene water storage tanks of 500 ltrs capacity ISI marked (cylindrical vertical with closed top) triple layered hoisted and fixed in position all as specified in SSR Part I including Ball valves high pressure of PTMT with epoxy coated aluminum rod & high-density plastic bal screwed for iron pipe and fixed. (Minimum weight 20mm-210 gms including Dismantling of old Brocken water tanks and refixing of inlet, outlet & over flow pipe etc complete all as specified and as directed.

All as per srl item no 105.00 here-in-before but water storage tanks of 1000 ltrs capacity ISI marked.

S&F in repair Ball valves 15mm bore high pressure of PTMT with epoxy coated aluminum rod & high-density plastic bal screwed for iron pipe & fixed complete all as specified and directed. (min. weight 15mm-142 gms)

S&F in repair Ball valves 20mm bore high pressure of PTMT with epoxy coated aluminum rod & high-density plastic bal screwed for iron pipe & fixed complete all as specified and directed. (min. weight 20mm-210 gms)

S&F in repair PVC tank lid/cover for water storage tank of 500/1000 ltrs capacity with fixing arrangement complete all as specified and directed.

S & F in repair for sink with drainage board made of stainless steel 1 mm thick with plugs, washers and wastes, including bedding in cement mortar to dwarf wall or including fixing cantilever brackets of angle iron and connecting union to pipe over all size 915 mm x460 mm and bowl size 410mmx330mmx 160mm complete all as specified and directed.

All as per srl item no 110.00 here-in-before but overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm.

S & F in repair for Stainless steel plate rack(Utensil Rack) of size (900mm x 750mmx250mm ) made out of stainless steel 0.63 mm thick sheet of grade AISI 304 (18/8) fixed with brass screw of required size including necessary fittings/nuts, bolts & washers complete all as specified and as directed.

All as per srl item no 112.00 here-in-before but size (750mm x 600mmx250mm).

S & F in repair for Vitreous China wash down water closet pan including P or S trap (pedestal pattern), white or in matching colour of tiles (excluding flushing cistern and flush pipe) including plastic water closet seat, white or in matching colour , closed pattern with flat bottom, and cover and mild steel chromium plated or aluminized hinging device and wash down water closet complete all as specified and as directed.

S & F in repair for Cera Cruse One Piece EWC S Concealed with Soft Close Seat Cover and Twin Flush Fittings 300 mm (710 L x 370 W x 770 H) mm Type One Piece Toilet S-Trap, Colour Snow White, Finish Gloss Finish Material Ceramic complete all as specified and directed. Make:- Model No. S1012135 of Cera or equivalent in any make mentioned in list of product.

S & F in repair for PVC Cistern Fittings with complete fixing Accessories & Set for single Piece-WC with combined flush tank,any type,pattern,Twin/single Flush Fittings & size such as for Make :Model No. S1012135 of Cera or equvalent in any make mentioned in list of product.

S & F in repair for PVC Soft Close Seat Cover with complete fixing Accessories & Set for single Piece-WC with combined flush tank,any type,pattern,for twin/single Flush Fittings & size such as for Make :Model No. S1012135 of Cera or equvalent in any make mentioned in list of product.

S & F in repair for vitreous China squatting pan, ‘Orissa’pattern, size 580 x 440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) squatting pan including connection to trap,and to flushing pipe, anti-syphonage pipe,etc. complete including making good to floor as per existing complete all as specified and directed.

S&F in repair for for Viterous China wash basin, white or in matching colour of tiles, flat back, size 630x450mm including brackets,CP brass waste fitting 32 mm dia,PVC waste pipe 750 mm long( Minimum) & 02 nos 15mm dia 600 mm long PVC connection with brass check nut at both ends cutting for and pinning in ends of brackets or erecting stand complete all as specified and as directed.

S & F in repair for vitreous china under counter wash basin with fixing accessories, oval shape white or any coloure of size 595 x 420 x 200 mm, incl 32mm dia brass chromium plated waste coupling(Make :ALD-705) and cast iron brackets including 15mm dia 600 mm long PVC connection with brass check nut at both ends including brass chromium plated fancy type angular stop cock with wall flange screwed for 15mm dia bore complete all as specified and as directed. Make : CNS-WHT-705 of Jaquar or equivalent in any of the make mentioned in list of products.

S & F in repair for vitreous china Constellation Pedestal wash Basin with fixing accessories, coloure Starwhite or Ivory,size 560mmx430mmx820mm complete set complete all as specified and as directed. Make : 10032 of hindware or equivalent in any of the make mentioned in list of products.

S & F in repair for 10 ltrs capacity PVC valveless, syphonic action type, flushing cistern, low level, white, with intel, ball valve, float and handle including brackets ,fush pipe of polyethylene of low or high density or PVC 32 mm dia including 15mm dia 600 mm long PVC connection with brass check nut at both ends complete all as specified and as directed.

S & F in repair for 15mm dia 600 mm long PVC connection including brass check nut at both ends screwed both end for iron pipes complete all as specified and as directed.

S & F in repair for Plastic water closet seat, any coloure, closed pattern with recessed bottom, & cover & mild steel CP or aluminised hinging device complete all as specified and directed.

S & F in repair for 100mm dia stainless steel perforated grating with hole/without hole for waste pipe fixed over floor/nahani trap complete all as specified and directed.

S & F in repair for 125mm dia chromium plated perforated grating with hole/without hole for waste pipe fixed over floor/nahani trap complete all as specified and directed.

S & F in repair for PVC multi purpose corner cabinet double window, size W 35cm x H 60cm x D 27cm, white / ivory colour, complete all as specified and directed.

S & F in repair for Bathroom cabinet Mirror size 622mmX422 mm wall Mounted, Shape Rectangular fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. Make: Prayag Model Number Cat No. 555 or equivalent in any of the make mentioned in list of products.

S & F in repair for Tubular towel rail, ISI marked 60cm long between flanges , 20mm dia 'D' type Brass Chromium plated incl necessary brackets, fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repair for brass chromium plated single towel rail 60cm long complete all as specified and directed. Make Jaquar CAT NO ACN-1111N or equivalent in any of the make mentioned in list of product.

S&F in repair for chromium plated Towel Rack 600mm Long with Lower Hangers with fixing arrangement complete all as specified and as directed.Make Jaquar CAT NO CAN-CHR-1181N or equivalent in any of the make mentioned in list of product.

S&F in repair for chromium plated Towel Ring Round with fixing arrangement complete all as specified and as directed. Make Jaquar CAT NO AEC-1121BN or equivalent in any of the make mentioned in list of product.

S&F in repair for 15mm bore dia of pipe Stop valves/angle valve, fancy type, chromium plated ,cast copper alloy, screwed down, high pressure, with crutch or above butterfly handle, screwed both ends for iron pipe or for unions and fixed (minimum weight 575 grams) complete all as specified and directed

S&F in repair for Brass chromium plated angular stop cock with wall flange screwed for 15mm dia bore iron pipe complete all as specified and directed Make:Jaquar CAT NO -CON-059KN1 or equivalent in any of the make mentioned in list of product.

S&F in repair for Brass chromium plated 15mm bore two way Angle Valve with wall flange (minimum weight 725 grams) complete all as specified and directed Make: Essco Jaquar Brass 2-Way Angle Valve (Chrome) MQT-526A or equivalent in any of the make mentioned in list of products.

S&F in repair for fancy type Pillar taps, cast copper alloy, with capstan heads, chromium plated, screwed down high pressure, with or without lettered 'Hot' or 'Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed (minimum weight 665 grams) complete all as specified and directed.

S&F in repair for 15 mm bore chromium plated fancy type Bib taps, cast copper alloy with crutch or above butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed (minimum weight 575 grams) complete all as specified and directed.

S&F in repair for brass chromium plated long body bib cock with wall Flange complete all as specified and directed. Make-Jaquar cat no CON-CHR-107KN or equivalent in any of the make mentioned in list of product.

S&F in repair for brass chromium plated two in one tap with Wall Flange screwed for 15mm dia bore iron pipe complete all as specified and directed Make: FLR-5041N of Jaquar or equivalent in any of the make mentioned in list of products.

S&F in repair for 15mm bore Stop valves, fancy type, chromium plated with long shank and cup (concealed type),cast copper alloy, screwed down, high pressure, with crutch or above butterfly handle, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed

S&F in repair for concealed type stop valve chromium plated fancy type with long shank and cup 15 mm bore Exposed Part Kit of Concealed Stop Cock & Flush Cock with Fitting Sleeve, Operating Lever & Adjustable Wall Flange with Seal (compatible with ALD-083, ALD-089 & ALD-081) complete all as specified and directed. Make Jaquar CAT NO SOL-CHR-6083K or equivalent in any of the make mentioned in list of product.

S&F in repair for 15mm bore brass chromium plated centre hole basin mixer without popup waste system with 450mm long braided hoses complete all as specified and as directed. Make : ACN-167KNB of JAQUAR or equivalent in any of the make mentioned in list of products.

S&F in repair for 15mm bore brass chromium plated Wall Mixer with Provision for Overhead Shower with 115mm long Bend Pipe on Upper Side, Connecting Legs & Wall Flanges complete all as specified and directed. Make : FLR-CHR-5273UPR of JAQUAR or equivalent in any of the make mentioned in list of products.

S&F in repair for 15mm bore brass chromium plated Wall Mixer Non-Telephonic Shower Arrangement with Connecting Legs & Wall Flanges complete all as specified and as directed. Make :FSOLO -SOL-CHR-6219 of Jaquar or equivalent in any of the make mentioned in list of products

S&F in repair for 15mm bore brass chromium plated Wall Mixer with Hand Shower Arrangement with Connecting Legs, Wall Flanges & Wall Bracket for Hand Shower complete without Hand Shower complete all as specified and as directed. Make :FLORENTINE CON-CHR-267KN of Jaquar or equivalent in any of the make mentioned in list of products

S&F in repair for 15mm bore brass chromium plated Wall Mixer 3-in-1 System with Provision for both Hand Shower and Overhead Shower Complete with 115mm Long Bend Pipe, Connecting Legs Wall Flange (without Hand and Overhead Shower) Make :Jaquar Queen's QQT-CHR-7281 or equivalent in any of the make mentioned in list of products

S&F in repair for Brass CP shower rose 125mm size including fixing to steel pipe or union complete all as specified and directed.

S&F in repair for CP overhead Shower 190mm dia round shape single flow (ABS Body Chrome Plated with Gray Face Plate) with rubit cleaning system complete all as specified. Make :- Jaquar, Cat No- OHS-CHR-497N equivalent in any of the make mentioned in list of products

S&F in repair for CP hand shower 100mm dia round shape single flow (ABS Body chrome plated with grey face plate) with rubit cleaning system. Make : HSH -CHR-1937 of JAQUAR or equivalent in any of the make mentioned in list of products.

S&F in repair for CP flexible shower tube 8mm dia & 1.5 m long with nuts. Make : SHA-CHR -549D8 of JAQUAR or equivalent in any of the make mentioned in list of products.

S&F in repair for premium wall bracket for hand shower, 35mm dia & 100mm long round shape. Make: SHA-CHR -555 of JAQUAR or equivalent in any of the make mentioned in list of products.

S&F in repair for chromium plated Hand shower (Health faucet) with 8mm Dia, 1.2 Meter long flexible tube and wall hook with N.R.V (Back Flow Preventer) Make : Jaquar Health Faucet ALD 577 or equivalent in any of the make mentioned in list of products.

S&F in repair for Jet Spray (Stainless Steel) with 1.5 meter Tube complete all as specified. Make:- Prayag Cat No- BEA-17 or equivalent in any of the make mentioned in list of products.

S & F in repair for Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long fixed with chromium plated brass screws and wooden/plastic cleats complete all as specified and directed.

S&F in repair for Glass shelf 600mm long, complete all as specified. Make:- Jaquar, Cat No- AKP-CHR-35771P or equivalent in any of the make mentioned in list of products.

S&F in repair for CP Corner Glass Shelf (with Bracket) with fixing arrangement complete all as specified and as directed. Make ACN-CHR-1173 of JAQUAR or equivalent in any of the make mentioned in list of product.

S&F in repair for Brass chromium plated Toilet paper Roll Holder with fixing arrangement complete all as specified and as directed. Make ACN 1151N (Chrome) of JAQUAR or equivalent in any of the make mentioned in list of product.

S&F in repair for Brass chromium plated soap dish fixed with chromium plated brass screws with fixing arrangement complete all as specified and as directed. Make Hindware Cat No F870004 or equivalent in any of the make mentioned in list of product.

S & F in repair for Low density polyethylene bore of pipe 32 mm (LDPE) of pressure rating 6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and as directed

All as per srl item no 161.00 here-in-before but Low density polyethylene bore of pipe 40 mm.

All as per srl item no 161.00 here-in-before but Low density polyethylene bore of pipe 50 mm.

S & F in repair for Waste fittings (coupling) 32mm bore waste fittings, brass,chromium plated for steel sinks, basins, urinal etc with long screwed shanks and fly-nuts and washer complete all as specified and directed.

All as per srl item no 164.00 here-in-before but 40mm bore waste fittings.

All as per srl item no 164.00 here-in-before but 50mm bore waste fittings.

S & F in repair for Brass CP bottle traps 32mm bore for wash basins with inlet & outlet screwed for pipe or connections including necessary packing, union & cap complete all as specified and directed.

S & F in repair for brass chromium plated waste coupling 60mm to 100mm dia for steel sink complete complete all as specified and directed.

S & F in repair for 32mm bore PVC waste pipe flexible type including all cups and sockets with minimum length 800mm for stainless steel sinks, basins, urinal etc complete all as specified and directed.

All as per srl item no. 169.00 here-in-before but 40mm bore PVC waste pipe.

All as per srl item no. 169.00 here-in-before but 50mm bore PVC waste pipe.

S & F in repair for Bib tap with long body 15mm bore standard of PTMT any colour screwed for iron pipe & fixed (min. weight 15mm-120 gms) complete all as specified and directed.

S & F in repair for Pillar taps fancy type15mm bore of PTMT any colour screwed for iron pipe & fixed. (min. weight 15mm-120gms) complete all as specified and directed.

S & F in repair for perforated grating grating square 150 mm size with/without waste hole of PTMT (min. weight 100 gms) complete all as specified and directed.

S & F in repair for Swivel shower of PTMT any colour for fixing with 15mm pipe (min. weight 40gms) including shower arm 15mm size, 195mm long with bend of 45 degreee with flange of PTMT any colour (min. weight 40 gms) complete all as specified and directed.

S & F in repair for Shelf of PTMT fixed with & including CP brass screws & wooden / plastic cleats (min. weight 300gms) complete all as specified and directed.

S & F in repair for Liquid soap container of PTMT fixed with & including CP brass screws & wooden/ plastic cleats (min. weight 105gms) complete all as specified and directed.

S & F in repair for Towel Ring of PTMT fixed with & including CP brass screws & wooden/plastic cleats (min. weight 90 gms) complete all as specified and directed.

S & F in repair for Towel rail 600mm long of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats (Minimum weight 190gms) complete all as specified and directed.

S & F in repair for PE-AL-PE composite fitting such as bend, female elbow, 1620x15 mm,1216x15mm,2520x 15mm complete all as specified and directed Make : Jindal/Vectus / Kitec/Nexgen Composite Industries/KPT Pipes/equivalent (as sample kept in GE's office)

All as per srl item No.180.00 here-in-before but 20 mm bore.

S & F in repair for PE-AL-PE composite fitting equal tee of size 2532x2532x2532x15 mm, 25 32 x 1216 x 2532x15 mm, 2532x1216x1216x15 mm complete all as specified and directed Make : Jindal/Vectus / Kitec/ Nexgen Composite Industries/KPT Pipes/ equivalent (as sample kept in GE's office)

All as per srl item No.182.00 here-in-before but 20 mm bore.

S&F in repair for PE-AL-PE composite fitting union of size 1620x1216 x15 mm ,2532x1620 x15 mm ,2532x2532 x15 mm complete all as specified and directed. Make : Jindal/Vectus / Kitec/Nexgen Composite Industries/KPT Pipes/equivalent (as sample kept in GE's office)

All as per srl item No.184.00 here-in-before but 20 mm bore.

S&F in repair for PE-AL-PE composite fitting union of size 2532x2532 x20 mm ,2532x1216 x20 mm,2532x1620 x20 mm,1620x1216 x20 mm complete all as specified and directed Make : Jindal/Vectus/ Kitec/ Nexgen Composite Industries/KPT Pipes/ equivalent (as sample kept in GE's office)

All as per srl item No.186.00 here-in-before but 15 mm bore.

S&F in repair for PE-AL-PE Pipe 15 MM bore confirming to IS Code 15450 of size 1216. complete all as specified and directed Make : Jindal/Vectus/Kitec/ Nexgen Composite Industries/KPT Pipes/equivalent (as sample kept in GE's office)

All as per srl item No.188.00 here-in-before but 20 mm bore.

S&F in repair for PE-AL-PE Pipe 15MM bore confirming to IS Code 15450 of size 1620 .complete all as specified and directed Make : Jindal/Vectus / Kitec/ Nexgen Composite Industries/KPT Pipes/equivalent (as sample kept in GE's office)

All as per srl item No.190.00 here-in-before but 20 mm bore.

S&F in repair for peg set of 05 Pin Stainless Steel Grade AISI 304, fancy type, superior quality and fixed with screws complete all as specified and directed.

S&F in repair for Hat and coat hooks, solid body, 175mm to 250mm complete all as specified and directed.

M&L in repair for replacing of GI fittings medium grade ISI mark like long screw, bends, socket, nipple, elbows, tees, short pieces, connectors, backnuts, reducer, diminishing pieces, caps, plugs and unions etc for 15mm bore pipe complete all as specified and directed. Note: Cost of taking down GI tubing for replacement of worn out/defective GI fitting & refixing there after shall be deemed to be included in the rates quoted by the contractor

All as per srl item No.194.00 here-in-before but 20 mm bore.

Demolition and breaking up drain pipes (Salt glazed ware, AC or Reinforced concrete) set in cement mortar,internal dia of pipe in 75/110mm complete all as specified.

S&F for PVC (SWR) pipes 75mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as spd and directed.

S&F for PVC (SWR) pipes 110mm bore single socketed, in any length with rubber ring joints laid in trenches or in floors complete all as spd and directed.

Taking down eaves gutter and rain water pipe any size any pattern , PVC/ AC pipe including all fittings ,heads shoes, bends etc including removal to store ,Internal dia of pipe in 75/110mm complete all as specified and directed.

S&F for PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fixed to walls complete all as spd and directed.

All as per srl item no 200.00 here-in-before but except pipe.

S&F for PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fixed to walls complete all as spd and directed.

All as per srl item no 202.00 here-in-before but except pipe.

S&F for PVC (SWR) bends ISI marked any radius 75mm dia complete all as spd and directed.

S&F for PVC (SWR) bends ISI marked any radius 110mm dia complete all as spd and directed.

S & F in repair for PVC (SWR) bends ISI marked any radius 75mm dia complete all as spd and directed.

S & F in repair for PVC (SWR) bends ISI marked any radius 110mm dia complete all as spd and directed.

S & F in repair for 75mm PVC floor trap, ISI marked with perforated grating incl jointing to waste pipe fixed with solvent cement complete all as specified and as directed.

M & L for PVC (SWR) gully trap 125/110 mm, setting & jointing with solvent cement ISI marked complete all as specified and as directed.

M & L for Salt glazed stone ware gully traps square mouthed, type 'P' 150mm x 150mm including excavation and earth work, set in PCC M-10 (Nominal mix) block measuring 45cm x 45cm and cast iron grating including jointing in cement mortar (1:1), complete all as specified and as directed.

Dismantling of cast iron or reinforced concrtee drain pipes, jointed in cement mortar and taking out of trenches, if required Internal dia of pipe in 75mm/100mm complete all as specified and as directed.

S &F for spun Cast iron soil, waste and vent pipes ISI marked, in any length with or without ears with cement joints, laid in trenches or in floors bore of pipe 100mm complete all as specified and as directed.

S &F for spun Cast iron soil, waste and vent pipes ISI marked, in any length with or without ears with cement joints, laid in trenches or in floors bore of pipe 75mm complete all as specified and as directed.

S &F for spun Cast iron soil, waste and vent pipes ISI marked, in any length with or without ears with cement joints, fixed to walls bore of pipe 75mm complete all as specified and as directed.

All as per srl item no 214.00 here-in-before but except pipe.

S &F for spun Cast iron soil, waste and vent pipes ISI marked, in any length with or without ears with cement joints, fixed to walls bore of pipe 100mm complete all as specified and as directed.

All as per srl item no 216.00 here-in-before but except pipe.

M & L spun Cast iron bends (ISI marked) (any radius) diminishing pieces or tapers (larger bore measured), bore of pipe 100mm, complete all as specified and as directed.

M & L spun Cast iron bends (ISI marked) (any radius) diminishing pieces or tapers (larger bore measured), bore of pipe 75mm, complete all as specified and as directed.

M & L in repair for Cast iron 75mm bore Bends (any radius) with duck's foot or heel rest or fitted with oval access doors complete all as specified and as directed.

M & L in repair for Cast iron 100mm bore Bends (any radius) with duck's foot or heel rest or fitted with oval access doors complete all as specified and as directed.

M&L in repairs of leaking water in brass chromium plated bib tap, pillar tap,concealed stop cock,angle valve of any make/description/size in any postion by replacing the brass spindle, brass jumper washer & CP Wall Flange tightening of fittings etc & make the all system fully functional to the entire satisfaction of Engr-in-Charge complete all as specified and directed.

All as per srl item no 222.00 but in brass chromium plated Wall Mixer, basin mixer & sink mixer.

M&L for Repair to low level flushing cistern of any make/description /size/ capecity in any postion by replacing the PVC Flush handle,knob adjustable lever, hook ,Syphon assembly complete set , PVC washer,hanging brackets ,32 mm dia Flush pipe of polyethylene of high density of PVC including jointing to any type& position of WC finally tightening of all fittings & make the all system fully functional to the entire satisfaction of Engr-in-Charge complete all as specified and directed. Note:-Unite rate quited by bidder included for all replacement of fittings as mentioned in this items

S&F in repair CI brackets conforming to IS 775-1970 for supporting sink/WHB of any type/make/size including making good to existing surface ,embedded in cement concrete 1 : 2 :4 type B-1 using 20mm graded stone aggregate , block of size 100 mm x 75mm x 150mm, including two coats of synthetic enamel paint over and including one coat of red oxide primer on exposed surface of bracket including taking down sink/WHB and re-fixing the same complete all as specified and directed

M & L spun Cast iron floor trap (ISI marked) of 75mm dia of outlet, plain with grating including jointing to waste pipe with solvent cement fixed in repair, and set in cement concrete type B1 (using 20 mm graded crushed stone aggregate)1:2:4 complete all as specified.

S & F in repair for gun-metal, globe or gate valves 15mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and as directed.

S & F in repair for gun-metal, globe or gate valves 20mm bore, with iron wheel head, screwed both end for iron pipe complete all as specified and as directed.

Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, arches, pillars, etc and disposal of debris out of MoD land complete all as specified and directed.

M &L for Brickwork with subclass 'B' old size bricks, straight or curved on plan exc 6m mean radius built in Cement mortar 1:6 complete all as specified and directed.

All as per srl item No 230.00 here-in-before but except old size sub class 'B' bricks. NOTE: Old bricks retrieved from demolition shall be used.

M&L Brickwork with subclass 'B' bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

All as per srl item No 232.00 here-in-before but except old size sub class 'B' bricks. NOTE: Old bricks retrieved from demolition shall be used.

M & L in repair for Precast cement concrete type B0 (1:2:4) using 12.5 mm graded aggregate Set in CM(1:4) louvres and jallies, 35mm thick (measured solid), including all mouldings but excluding frame complete all as specified and directed.

M & L in repair for Precast cement concrete type B1 (1:2:4) using 20 mm graded aggregate in window or door cills, lintels, bressumers, steps, quoin blocks (for use with masonry), string courses, copings, kneelers, apex stones, pier caps, columns, posts, boundary pillars, bed plates, pintle blocks, anchorage blocks, bonders (for stone walling), corbels, brackets, etc.(of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in CM(1:4) with joints to match complete all as specified and directed.

M&L for joint free Non - skid Ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors ,horizontal, shelf etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:4 including dismantling existing tiling with cement mortar bedding complete all as specified and directed. Note:-The bidder quoted rate included for all straight, Raking or circular cutting, wastage on tiles & texture, colour, Shade, laying of tiles to any pattern & any design with one or more colours shall be approved by GE.

All as per srl item no 236.00 here-in-before but area of each tiles exceeding 0.11 Sqm but not exceeding 0.18 Sqm as in floors etc.

All as per srl item no 236.00 here-in-before but area of each tiles exceeding 0.18 Sqm but not exceeding 0.38 Sqm as in floors etc.

All as per srl item no 236.00 here-in-before but in as vertical/skirting surface etc over and including 10mm thick rough cement plaster to receive tiles in CM 1:4

All as per srl item no 237.00 here-in-before but in as vertical/skirting surface etc over and including 10mm thick rough cement plaster to receive tiles in CM 1:4

All as per srl item no 238.00 here-in-before but in as vertical/skirting surface etc over and including 10mm thick rough cement plaster to receive tiles in CM 1:4

M&L for Vitrified Ceramic tiles 10 mm thick light/Dark shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over & including 15mm thick screed bed in CM 1:4 including dismantling existing tiling with cement mortar bedding complete all as specified and directed. Note:-The bidder quoted rate included for all straight, Raking or circular cutting, wastage on tiles & texture, colour, Shade, laying of tiles to any pattern & any design with one or more colours shall be approved by GE.

All as per srl item no 242.00 here-in-before but in as vertical/skirting surface etc over and including 10mm thick rough cement plaster to receive tiles in CM 1:4

M&L for (first quality) coloured Glazed ceramic tiles including digital/printed/High lighter tiles in vertical surface such as dado etc size of 450mmX 300mmX 7mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match the shade of the tiles over and including 10mm thick rough cement plaster to receive tiles in CM 1:4 including dismantling existing tiling with cement mortar bedding complete all as specified and directed. Note:-The texture ,colour,size ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles.

All as per srl item no 244.00 here-in-before but tiles size of 300mmX 200mmX 7mm thick

All as per srl item no 244.00 here-in-before but tiles size of 600mmX 300mmX 7-10mm thick

M&L 18-20mm thick granite (pure black or any coloure) work (table rubbed and polished) in steps, jambs pillars, window cills ,cooking platform and like including pointing in white cement (1:2) using marble dust with admixture of pigments to match with shade granite over and including 15mm thick screed bed or bedding layer in cement mortar 1:4 including dismantling of existing stone slab etc complete all as specified and directed. Note:- The stone slab shall be in one piece over kitchen plateform,window cill and making gas pipe holes 25mm dia with rounded holes and all open edges to be half rounded.

Taking down cement plaster of any description and thickness on walls/ceilings etc including racking out joints, hacking for key, scrubbing down with water etc including necessary scaffolding up to four storeys height of bldgs if required and removing of debris out of MoD land complete all as specified and as directed.Note : The work will be carried out in patches as directed.

M &L for two coat plaster 35 mm thick (20 mm + 15 mm) on fair faces or other than fair faces, rough surface of brick/stone/concrete masonry surface of wall, fin, facia, chajjas, parapet and similar article in cm 1:3 with liquid water proofing compound (as per manufacturer’s instructions) mixed in both coats, finished even and smooth without using extra cement matching with existing work including necessary scaffolding up to four storeys height of bldgs complete all as specified and as directed. Note:- (i) WPC shall be measured and paid separately. (ii) Two coat plaster shall be carried out as mentioned in clause 14.18 of SSR-2009, Part-I complete.

M & L for rendering 15mm thick in CM 1:4 mixed with liquid water proofing compound (as per manufacturer’s instructions) on fair faces of brick work ,concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cement including necessary scaffolding up to four storeys height of bldgs complete all as specified and as directed. Note: WPC shall be measured and paid separately.

All as per srl item no 250.00 here-in-before but as in patches not exc 3 sqm each patch

M&L for preparation of newly plastered external surfaces of wall and applying two coats of cement Base Paint over and including one coat of alkali resistant primer without any brush marks in any colour including necessary scaffolding up to four storeys height of bldgs complete all as specified and as directed. Note: Shade/colour shall be approved by GE

All as per srl item no 252.00 here-in-before but applying two coats of Acrylic emulsion paint over and including one coat of acrylic primer

M & L for rendering 15mm thick in CM 1:4 mixed with liquid water proofing compound (as per manufacturer’s instructions) on other than fair faces of brick work ,concrete surface of wall, fin, facia, chajjas, parapet and similar article finished surface even and smooth without using extra cement including necessary scaffolding up to four storeys height of bldgs complete all as specified and as directed. Note: WPC shall be measured and paid separately.

All as per srl item no 254.00 here-in-before but as in patches not exc 3 sqm each patch

M & L for preparation of newly plastered internal surfaces of wall and applying minimum 1.5mm thick white cement based putty on the surfaces & making smooth surface and applying two coats of distemper oil emulsion over and including one coat of chalk whitening primer finished without any brush marks on the surface in any colour complete all as specified and as directed. Note:- Shade/colour shall be approved by GE.

All as per srl item no 256.00 here-in-before but applying two coats of Acrylic Emulsion Paint over one coat of acrylic primer

Material and labour for 10 mm thick rendering on brick work or concrete surfaces in CM 1:3 mixed with liquid water proofing compound (as per manufacturer’s instructions) as in ceiling of roof slab,fin, facia, chajjas,parapet and similar article etc finishing surfaces even and smooth without using extra cement including necessary scaffolding up to four storeys height of bldgs complete all as specified and as directed.

All as per srl item no 258.00 here-in-before but as in patches not exc 3 sqm each patch

M & L for preparation of newly plastered wall surface and applying three coats of white wash without any brush marks on the surface including necessary scaffolding up to four storeys height of bldgs complete all as specified and as directed.

All as per srl item no 260.00 here-in-before but surfaces of ceiling.

M & L for complete removal of existing treatment from ceiling surface preparation of surface and applying two coat of white wash on undecorated surfaces without any brush marks matching with existing work including necessary scaffolding up to four storeys height of bldgs complete all as specified and as directed.

All as per srl item no 262.00 here-in-before but wall surfaces.

M & L for preparation of old plastered or un-plastered external surface of wall by brooming down or steel wire brushing,scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of cement base paint of any colour without any brush marks matching with existing work including necessary scaffolding up to four storeys height of bldgs complete all as specified and as directed.

All as per srl item no 264.00 here-in-beforee but applying one coat of exterior grade emulsion paint (weather proof/weather coat) of any colour.

M & L for complete removal of existing treatment external surface of wall preparation of surface and applying two coats of cement Base Paint without any brush marks on the surface in any colour over and including a coat of alkali resistant primer (as per manufacturer’s recommendations) matching with existing work including necessary scaffolding up to four storeys height of bldgs complete all as specified and as directed.

All as per srl item no 266.00 here-in-before but applying two coats of exterior grade emulsion paint (weather proof/weather coat) in any colour over and including one coat of primer (as per manufacturer’s recommendations)

M&L for preparation of old plastered or un-plastered internal surface of wall by brooming down or steel wire brushing,scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc and applying one coat of distemper oil emulsion of any colour finished without any brush marks matching with existing work including necessary scaffolding up to four storeys height of bldgs complete all as specified and as directed.

M & L for complete removal of existing treatment internal surface of wall preparation of surface and applying minimum 1.5mm thick white Cement based putty on the surfaces & making smooth surface and applying two coats of distemper oil emulsion finished without any brush marks including necessary scaffolding up to four storeys height of bldgs complete all as specified and as directed.

All as per srl item no 269.00 here-in-before but applying two coats of Acrylic Emulsion Paint over and including one coat of acrylic primer (as per manufacturer’s recommendations).

All as per srl item no 269.00 here-in-before but applying two coats of plastic emulsion Paint over and including one coat of paint primer (as per manufacturer’s recommendations).

M &L for preparation, cleaning, stopping, rubbing down, stopping old painted surface of brick/concrete /stone/asbestos cement/ plaster ,un- plaster wall/ceiling ,fin, facia, chajjas, parapet, textures, textures, heritage finish stone chips, grit, granular finish surface and similar articles etc and applying one coat of Plastic emulsion paint of any colour without any brush marks, matching with existing work, including necessary scaffolding up to four storeys height of bldgs complete all as specified and as directed.

All as per srl item no 272.00 here-in-before but applying one coat of synthetic enamel Paint

M &L for preparation, cleaning, stopping, rubbing down, stopping old painted surface of brick/concrete/ stone/asbestos cement/ plaster ,unplaster wall/ceiling ,fin, facia, chajjas, parapet, textures, textures, heritage finish stone chips, grit, granular finish surface and similar articles etc and applying two coat of Plastic emulsion paint of any colour over and including priming paints ,without any brush marks, matching with existing work, including necessary scaffolding up to four storeys height of bldgs complete all as specified and as directed.

All as per srl item no 274.00 here-in-before but applying two coat of Synthetic enamel paint of any colour over and including priming paints

M&L for heritage granules (Bakelite Hylam Limited) finishes of approved pattern or shade as in repair of any height internal or external surfaces including necessary scaffolding including taking down old deteriorated finishing of any type,matching with existing work complete all as specified and directed by Engineer-in-Charge. Make- Bakelite hylam ltd or equivalent in any of the make mentioned in list of product.

M & L for preparation of old painted wooden surfaces of any description over 10 centimeter width or girth and applying one coat of synthetic enamel paint in any colour finished without brush mark on surface including necessary scaffolding up to four storeys height of bldgs if required, Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed.

M & L for preparation of old painted steel and iron surfaces of any description over 10 centimeter width or girth and applying one coat of synthetic enamel paint in any colour finished without brush mark on surface including necessary scaffolding up to four storeys height of bldgs if required,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed.

M & L for French polishing on surfaces of any description, width or girth including cleaning & preparing the surface including a coat of wood filler on old works with one or more coats in any colour finished without brush mark on surface including necessary scaffolding up to four storeys height of bldgs if required,Shade/colour shall be approved by GE,all painted areas site to be cleaned and hand over as earlier without any extra cost to Govt complete all as specified and as directed.

M &L for cutting down plants / trees of girth not exc 25 cm & area not exe 1sqm each from roof tops /sides of external walls of buildings, chajja, wall junctions, junctions of rain water / soil /waste vent pipes including taking out roots entered in wall/slab pouring chemical to burn the deep roots surfaces and making good the surfaces including repairing the CI/GI/PVC joints of affected locations by applying TUFALO (herbal medicine )and making good to suit the adjoining surfaces using PCC type 1:2:4, type B-O or cement mortar 1:2 complete all as per manufacturer instructions complete all as specified and as directed. NOTE: Rate included for Any CI/GI/PVC pipes and fittings damaged during work shall be replaced by new one to insure leakage / seepage free joint without any extra cost to the department ,all necessary scaffolding,protective measures etc up to four storeys height of bldgs & disposal of debris out of MoD land complete.

M & L for water proofing treatment to sunken slab /portion and shall be provided as mentioned below:- (a) Demolition & taking out sunken PCC, taking down old plaster from wall & floor surface (b) M&L for 50 mm bore ‘medium grade’ galvanized pipe as in spout including necessary cutting to wall/beam etc and proper setting in cement mortar 1:3. Making the sunken portion in a slope of 1:40 outwards with GI pipe (MG) spout , projecting at least 150mm beyond outer face of wall.including making coving of 75mm size using with PCC 1:2:4 type B-1 using 12.5mm graded stone aggregate at the junction of vertical & horizontal surface of the sunken floors. (c ) M&L for 15mm thick plaster in cement sand mortar (1:4) mixed with water proofing compound (conform to IS 2645) as per manufacturer’s instructions and applied both on floor and wall. All the joints of pipe shall be sealed properly, the surfaces shall be cured and allowed to dry. (d) M&L for apply a coat of Moisture Cured High Tensile Elastomeric Modified Poly Urethane Based Liquid Membrane on floor & wall as per manufacturer’s instructions. (e) Sunken floor filled with PCC 1:3:6 type C-1 using 20mm graded crushed stone aggregate complete all as specified to receive floor toping as specified after carrying out the required tests of water proofing.

Demolition of cement concrete or lime concrete (unreinforced) of any description and in any position not otherwise specifically provided for and removing the debris outside from defence land / site, complete all as specified and directed.

M & L for cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate as in foundations,filling and mass concrete complete all as specified and directed

M&L for PCC 1:2:4 type B-1 using 20mm graded crushed stone aggregates as in surface channels and drains complete all as specified and as directed.

M & L for extra for forming fair finished drain or channel 30 cm inner girth in cement concrete, using ex- tra cement, including forms, moulds, mi- tred/stopped ends etc complete all as specified and directed.

M&L PCC in roof kerbs of mud stops, rounded or chamfered on edges type B1 (1:2:4) using 20 mm graded aggregate mixed with liquid water proofing compound (as per manufacturer’s instructions) complete all as specified and directed.

M&L for plain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate in copings, bed plates including weathering, slightly rounded or chamfered angles and throating as directed including necessary form work complete all as specified and directed.

Demolition of cement concrete in ground floors and pavings n. exc 15 cm thick (below or above ground level) and disposal of debris out of MoD land complete all as specified and directed.

M & L for 75mm thick plain Cement concrete 1:4:8, type D-2 using 40mm graded crushed stone aggregate as in sub base complete all as specified and as directed. Note:- Top finishing surfaces of concrete to be even and rough to receive the topping layer/tiles.

M&L for 25mm thick PCC 1:2:4, type B-0 (using 12.5mm graded crushed stone aggregates) for sub base of floors, complete all as specified and directed. Note:- Top finishing surfaces of concrete to be even and rough to receive the topping layer/tiles.

M&L for 40 mm thick plain cement concrete type B-1 , 1:2:4 (using 20 mm graded crushed stone aggregate) finished even and smooth without using extra cement as in flooring complete all as specified and directed. Note- Glass dividing strips shall be measured & paid separately.

M&L for 38 mm wide and 3 mm thick glass dividing strips in flooring by fixing in position and making square or rectangle for casting concrete in flooring complete all as specified and directed.

M&L for Spike rolling to surfaces or making impressions of expanded metal, whilst the concrete is green complete all as specified and directed.

M & L for Cement concrete 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) as in plinth protection and paving 75mm thick laid in slope finished even and fair including making joints at every 2.5 m and at corner filled with bitumen 85/25 and sand in ratio 1:2 by weight and complete all as specified and directed.

Supply only liquid water proofing compound all as specified and as directed.

M & L for chequred cement concrete designer rubberized, glossy finish tiles 30 cm x 30 cm x 25mm thick , set, jointed and pointed in neat cement slurry in floors with grey cement and pigments over and including 20mm thick Screed bed or bedding layer in CM 1:4 including demolition/dismantling old surface complete all as secified and as directed. Note:-The texture ,colour,size ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles.

M&L Non abrasive paving (rectified endura) cement concrete coloured tiles 300 mm x 300 mm x 10 mm thick set jointed and pointed in neat cement slurry mixed with pigment laid over and including 15 mm thick screed bed in cement mortar 1:4 including demolition/dismantling old surface complete all as secified and as directed. Note:-The texture ,colour,size ,Shade of tiles & laying of tiles to any pattern & any design with one or more colours shall be approved by GE and Rates also including in this item for necessary raking circular cutting or notching and waste on tiles.

Demolition of RCC of any description slab , shelves , chajjas, water tank,chullah hoods etc and in any position including cutting reinforced as required and disposal of debris out of MoD land complete all as specified and directed.

M & L for RCC type B-1 (1:2:4) using 20 mm graded aggregate in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed. Note:- Reinforcement shall be measured and paid separately).

M & L for for precast reinforcement cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in landings, cover slabs for drain, manholes etc chullah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces set in cement mortar (1:4) complete all as specified and as directed. Note:- Reinforcement shall be measured and paid separately).

M&L for form work to sides and soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work not exceeding 200mm thick horizontal or sloping for rough finished surfaces of concrete.

M & L for Mild steel TMT bars 10mm dia & over,cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends & binding with & including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Grinding with machine grinder & polishing of granite stone /terrazzo topping marble aggregate /marble Stone slab / kota stone slab etc. as in old floor, wall, cooking platform, shelf etc complete all as specified and directed.

M&L for preparation of new wooden Surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint over and including a coat of pink primer complete all as specified and directed.

Excavating in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10 sq m area on plan and n exc 1.5 m in depth and getting out in any type of soil. Note:-(1) The excavation work will be carried out by manually or mechanical means in any location/ area as directed by Engr-in- charge. (2) Any damage occur to water supply pipe line/ electric cable/existing drain/sewage line during excavation work will be make good up to satisfaction of Engr- in-charge.

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exc 25 cm thick with any type of soil complete all as specified and directed.

Removing excavated Soils material exc. 250m but n exc. 500 m and depositing where directed complete all as specified and directed.

Material and Labour for UPVC pipe 200mm dia type "B" with wall thickness 4mm(min) of pressure rating 8 KN/sqm laid in trenches and jointed with cement solvent including testing complete all as specified and directed including demolition and breaking up drain pipes in cement mortar including demolition of PCC bedding and hunching complete all as specified and directed

M&L for concrete bed to drain pipes including packing under,and haunching against the sides of pipes after they are laid and tested in Cement concrete 1:4:8 type D-2 using 40 mm graded crushed stone aggregate for Bore of pipe 200mm complete all as specified and directed

Note:- Unit rate quoted by tenderer shall included for (A) Cleaning stains and dripping mortar from floors and walls, etc. (B) Use of all scaffolding, trestles, ladders, cradles, etc. necessary for execution of work and protective measures.(C) Removing of nails, making good holes, cracks, etc.(D) Work in patches, and in narrow \widths. bands, cornices, pilasters, etc. and cutting in edges to line, where necessary.(E) Spreading and removing coverings to doors, windows, floors, fittings, fixtures, fittings, furniture etc., to protect them from splashes.(F) Removing and replacing furniture, movable cupboard, chicks, blinds, etc.(G) Washing floors, cleaning glass, joinery, electric fittings, wiring, etc. of drops and splashes and leaving premise, clean and tidy. (H) Taking down, cleaning as directed and re-fixing blinds and fittings, picture rods, cornice poles and small items of builder’s hardware such as door knobs, finger plates, escutcheons, hooks etc. which are not required to be painted.

Notes :- (a) The contract sum shall be arrived at after deduction of amount of Schedule of Credit. (Rs. 1,24,130.00). (b) PERFORMANCE SECURITY :- (Refer condition 19 of IAFW-2249) The performance security for an amount equivalent to 5% (Five percent) of the accepted contract sum shall be delivered by the successful bidder immediately after the date of intimation letter of acceptance and all provisions shall be applicable as per condition 19 of IAFW 2249

Om Sai Ram Builders

Substantial Const. Co.

M/S Raghuvanshi Builders

VIKRAM SINGH MANHAS