At GKP- (1)- Proposed Renovation of Varuna Rest House. (2)- Proposed Development of Park Behind Railway Officers Club.

Item Breakup - A-DSR-2021

nominal size), including finishing complete. 11.41S VITRIFIED FLOOR TILES Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS: 15622, of approved 11.41 make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ s q m including grouting the joints with white cement and matching pigments etc., complete. 3 11.41.3 Size of Tile 800x800 mm Sqm 50 1879.95 93997.5 Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & 11.46 shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/ sqm including grouting the joint with white cement & matching pigments etc. complete. 4 11.46.3 Size of Tile 800x800 mm Sqm 5 1932.75 9663.75 Providing and laying Polished Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick 11.56 base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing , curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge. 11.56.2 Polished Granite stone slab of all colour and Sqm 689 2677.9 1845073.1 5 texture except Black, Cherry/Ruby Red Total 2710188.60 Item- 9 All items of Sub Head-12.0 (Roofing) of DSR-2021 S No. Item No Description of Item Unit Qty Rate Amount 12.0 ROOFING DYCE-GA-ENGINEERING/NORTH EASTERN RLY Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 12.42 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire 12.45 at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer's specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.45.1 12.5 mm thick tapered edge gypsum plain board Sqm 562 1145.95 644023.9 1 conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) Total 644023.90 Item- 10 All items of Sub Head-13.0 (Finishing) of DSR-2021 S No. Item No Description of Item Unit Qty Rate Amount 13.0 FINISHING 13.4S CEMENT PLASTER (IN COARSE SAND) 13.4 12 mm cement plaster of mix : 1 13.4.2 1:6 (1 cement: 6 coarse sand) Sqm 750 294.35 220762.5 15 mm cement plaster on rough side of single or 13.5 half brick wall of mix: 2 13.5.2 1:6 (1 cement: 6 coarse sand) Sqm 250 339.1 84775 13.44S EXTERIOR FINISHING Finishing walls with Premium Acrylic Smooth 13.47 exterior paint with Silicone additives of required shade: DYCE-GA-ENGINEERING/NORTH EASTERN RLY 13.47.1 New work (Two or more coats applied @ 1.43 Sqm 150 162.35 24352.5 3 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) Finishing with Deluxe Multi surface paint system 13.48 for interiors and exteriors using Primer as per manufacturers specifications : 13.48.3 Painting Steel work with Deluxe Multi Surface Paint Sqm 150 140.05 21007.5 to give an even shade. Two or more coat applied 4 @ 0.90 ltr/10 sqm over an under coat of primer applied @ 0.80 ltr/10 sqm of approved brand and manufacture 13.80 Providing and applying white cement based putty Sqm 500 123.85 61925 of average thickness 1 mm, of approved brand and 5 manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. Applying priming coats with primer of approved 13.85 brand and manufacture, having low VOC (Volatile Organic Compound ) content. Distempering with 1st quality acrylic distember (Ready mix) having VOC content less than 50 13.90 grams/ litre of approved brand and manufacture to give an even shade : 6 13.90.1 Old work (one or more coats) Sqm 1000 56.8 56800 13.91 Removing dry or oil bound distemper, water Sqm 1000 20.85 20850 proofing cement paint and the like by scrapping, 7 sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete. Total 490472.50 Item- 11 All items of Sub Head-15.0 (Dismantling and Demolishing) of DSR-2021 S No. Item No Description of Item Unit Qty Rate Amount 15.0 DISMANTLING AND DEMOLISHING Demolishing cement concrete manually/ by mechanical means including disposal of material 15.2 within 50 metres lead as per direction of Engineer - in - charge. 15.2.1 Nominal concrete 1:3:6 or richer mix (i/c cum 350 2007.1 702485 1 equivalent design mix) Demolishing brick work manually/ by mechanical means including stacking of serviceable material 15.7 and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge. 2 15.7.4 In cement mortar cum 50 1698.45 84922.5 Dismantling doors, windows and clerestory windows (steel or wood) shutter including 15.12 chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : 3 15.12.1 Of area 3 sq. metres and below Each 8 302.7 2421.6 15.18 Dismantling steel work in built up sections in Kg 2000 4.65 9300 angles, tees, flats and channels including all 4 gusset plates, bolts, nuts, cutting rivets, welding etc. including dismembering and stacking within 50 metres lead. Dismantling tile work in floors and roofs laid in 15.23 cement mortar including stacking material within 50 metres lead. 5 15.23.1 For thickness of tiles 10 mm to 25 mm Sqm 758 60.5 45859 Dismantling roofing including ridges, hips, valleys 15.28 and gutters etc., and stacking the material within 50 metres lead of: 6 15.28.1 G.S. Sheet Sqm 425 136 57800 15.56 Dismantling old plaster or skirting raking out joints Sqm 758 45.05 34147.9 and cleaning the surface for plaster including 7 disposal of rubbish to the dumping ground within 50 metres lead. DYCE-GA-ENGINEERING/NORTH EASTERN RLY Total 936936.00 Item- 12 All items of Sub Head-16.0 (Road Work) of DSR-2021 S No. Item No Description of Item Unit Qty Rate Amount 16.0 ROAD WORK 16.42S CONCRETE PAVEMENTS 16.42 Cement concrete 1:2:4 (1 cement : 2 coarse sand : cum 20 7399.2 147984 4 graded stone aggregate 40 mm nominal size) in 1 pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. 16.49S MISCELLANEOUS 16.68 Providing and laying 60mm thick factory made Sqm 500 951 475500 cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & 2 shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in- charge. Total 623484.00 Item- 13 All items of Sub Head-17.0 (Sanitary Installations) of DSR-2021 S No. Item No Description of Item Unit Qty Rate Amount 17.0 SANITARY INSTALLATIONS Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as per IS:13983 with C.I. brackets and 17.10 stainless steel plug 40 mm, including painting of fittings and brackets, cutting and making good the walls wherever required : 17.10.1 Kitchen sink with drain board 1 17.10.1.1 510x1040 mm bowl depth 250 mm Each 12 6008.45 72101.4 17.80 Providing and fixing white vitreous china battery Each 12 7004.45 84053.4 based infrared sensor operated urinal of approx. size 610 x 390 x 370 mm having pre & post flushing with water (250 ml & 500 ml 2 consumption), having water inlet from back side, including fixing to wall with suitable brackets all as per manufacturers specification and direction of Engineer-in-charge. 17.81 Providing and fixing floor mounted, white vitreous Each 12 16100.4 193204.8 china single piece, double traps syphonic water closet of approved brand/make, shape, size and pattern including integrated white vitreous china cistern of capacity 10 litres with dual flushing 3 system, including all fittings and fixtures with seat cover, cistern fittings, nuts, bolts and gasket etc including making connection with the existing P/S trap, complete in all respect as per directions of Engineer-in-Charge. Total 349359.60 Item- 14 All items of Sub Head-18.0 (Water Supply) of DSR-2021 S No. Item No Description of Item Unit Qty Rate Amount 18.0 WATER SUPPLY 18.7S C.P.V.C. PIPES Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & 18.8 fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge, Concealed work, including cutting chases and making good the wall etc. DYCE-GA-ENGINEERING/NORTH EASTERN RLY 1 18.8.1 15 mm nominal dia Pipes Metre 200 441.15 88230 2 18.8.2 20 mm nominal dia Pipes Metre 200 513.75 102750 3 18.8.3 25 mm nominal dia Pipes Metre 100 626.05 62605 18.15S BRASS FITTINGS Providing and fixing brass bib cock of approved 18.15 quality : 4 18.15.1 15 mm nominal bore Each 24 303.85 7292.4 Providing and fixing uplasticised PVC connection 18.21 pipe with brass unions : Providing and fixing C.P. brass shower rose with 15 18.22 or 20 mm inlet : 5 18.22.2 150 mm diameter Each 12 190.1 2281.2 18.59S AIR VALVE & WATER METER (BULK TYPE) Providing and fixing unplasticised P.V.C. 18.74 connection pipe with PTMT Nuts, collar and bush of approved quality and colour. 6 18.74.2 15 mm nominal bore with 45 cm length Each 12 107.9 1294.8 Total 264453.40 Item- 15 All items of Sub Head-26.0 (New Technologies and Materials) of DSR-2021 S No. Item No Description of Item Unit Qty Rate Amount 26.0 NEW TECHNOLOGIES AND MATERIALS 26.73S PREFAB/PRECAST TECHNOLOGY Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid door/window/clerestory windows & desertory other Frames/Chowkhat comprising of virgin PVC polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gm s) fabricated with miter joints after applying PVC solvent cement and screwed with full body threaded star headed SS screws having minimum frame density of 750 kg/cum, screw withdrawal strength of 2200 N (Face) & 1100 N (Edge), 26.86 minimum compressive strength of 58 N/mm2, modulus of elasticity 900 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixed in position with M.S hold fast/lugs/SS dash fasteners of required dia and length complete as per direction of Engineer- In- Charge. (M.S hold fast/lugs or SS dash fasteners shall be paid for separately). Note: For WPC solid door/window frames, minus 5mm tolerance in dimensions i.e depth and width of profile shall be acceptable. Variation in profile dimensions on plus side shall be acceptable but no extra payment on this account shall be made. 1 26.86.7 Frame size 65 x 150 mm Metre 1100 1481.85 1630035 DYCE-GA-ENGINEERING/NORTH EASTERN RLY Providing and fixing factory made single extruded WPC (Wood Polymer Composite) solid plain flush door shutter of required size comprising of virgin polymer of K value 58-60 (Suspension Grade), calcium carbonate and natural fibers (wood powder/ rice husk/wheat husk) and non toxic additives (maximum toxicity index of 12 for 100 gms) having minimum density of 650 kg/cum and screw withdrawal strength of 1800 N (Face) & 900 N (Edge), minimum compressive strength 50 26.87 N/mm2, modulus of elasticity 850 N/mm2 and resistance to spread of flame of Class A category with property of being termite/borer proof, water/moisture proof and fire retardant and fixing with stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk S.S screws, all as per direction of Engineer-In- Charge. (Note: stainless steel butt hinges and necessary S.S screws shall be paid separately) 2 26.87.2 35 mm thick Sqm 211 4556.05 961326.55 Total 2591361.55

Item Breakup - B-DSR-2020 (H&L)