Diversion of line over hospital nallah and preventive maintenance of 440V OH line distribution network from GM Office sub-station to filter plant and central hospital Dhori under GM Unit, Dhori Area.

Amount

Erection of metallic pole of length above 10.00 metre and upto 12.00 metrein cement concrete1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mmnominal size) foundation including excavation and refilling etc. asrequired.

Erection of RCC/ PCC pole strut in brick ballast and ramming the foundation including excavation and refilling and secured with holding clamps, bolts, nuts, etc. as required.

Re-erection/tensioning and erection of ACSR conductor of 7/2.11 mm to 7/3.00 mm diameter including binding etc. as required.

Supplying and erection of stay set complete (galvanised) with 19/20 mm dia X 1.8 metres long stay rod, anchor plate of size 45 cm X 45 cm X 7.5 mm, thimble, stay clamps, turn buckle ( 20 mm X 60 cm ), 7/ 3.15 mm dia G.I. stay wire and strain insulator etc in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size ) foundation including excavation and refilling etc. as required.

Supplying and erection of 100 mm X 80 mm pin insulator complete with G. I. Spindle and nuts etc. as required .

Supplying and erection of 100 mm X 110 mm shackle insulator with G. I. Bolt, nuts and straps etc. as required .

Supply of 8 SWG G.I. Wire for cradling and earthing

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 4 wire over head line complete with clamps, bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Supplying of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) cross arm for 2 wire over head line complete with clamps,bolts, nuts and washer etc including drilling of holes for insulator pins etc (as per drawing) and painting with primer and finished paint as required .

Erection of angle channel iron cross arm on RCC/ PCC/steel tubular/ rail pole etc. as required.

Dismantling of over head lines comprising of aluminium over head conductor, G.I. wire, cross arms,insulators etc. as required.

Dismantling of pole embedded in cement concrete foundation etc. as required.

Supply of 200kg PCC/RCC pole of length 8m

Transportation of pole from factory to working site

Erection of craddle guard

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared.

Applying priming coat : With ready mixed red oxide zinc chromate primer of approved brand and manufacture on steel galvanised iron/ steel works

Painting with aluminium paint of approved brand and manufacture to give an even shade. Two or more coats on new work

Lettering with black Japan paint of approved brand and manufacture for numbering of poles etc whichever required

Supplying of two lengths of channel iron 75 mm X 40 mm X 6 mm (7.14 kg per metre) double pole cross arm for three wire 11KV over head line conductors complete with through bolts and nuts for clamping to the poles, 50 mm X 6 mm M.S. flats welded on one side to the channel iron and with bolts and nuts on the other side for tying the cross arms together, including drilling holes for insulator pins/ fittings, bolts, nuts and washers etc (as per drawing) and painting with primer and finish paint as required.

Erection of double pole 3 wire cross arm for over head lines as required.

Total impact of GST for the purpose of CTC

M/s Sanjay Supplier

M/S A N TRADERS