Renovation of boundary illumination arrangement and allied works at P/H No.-I of Baglani ground water based W/S scheme under EMSD-I, PHE Dte. in 24Pgs(N).

Amount

Dismantling the existing defective fixture after disconnection of all electrical connection by deploying skilled personnel & kept at site all complete.

Supply delivery at site of 45 watt LED Street light luminaire with pressure die cast aluminium housing ,heat resistant toughened glass with frame offering (IP-66) protection. (Make-Philips(Type-BRP 031 LED 45 CW MR PSU GR DX )/CGL/Similar type of approved make)

Supply delivery at site of Decorative Post top for 360degree indirect light, resistance to impact and corrosion(IP65 protection) . Make-CGL,Type-LPTO-40-CDL / Similar type of approved make)

Supply delivery at site of 1.1 KV grade 6 Sq.mm 2core Al.Ar. Cable (Make-Gloster/Mescab/Polycab/Havells/any other approved make) Cable should be supplied as per site requirement.

Supply and fitting fixing of MS water proof type looping cable box of size 250mm x 200mm x 100mm having 4 mm thick comprising of one 250V 5Amp kit-kat fuse unit, one Nutral link porcelain insulator,2 compression cable gland of 2 core,6 sqmm PVC Al Ar. Cable end having liked with rubber gasket line top cover with mechanical locking arrangement etc earthing terminal with lugs on steel tubular pole incl. supplying and fixing 40*6mm thick MS clamp with nut,bolts etc painting with anti-corrosive paint.

Fitting fixing the fixtures as in item no. (2 & 3) in poles & gate including making interconnection from pole box to fixture with 2.5 Sq.mm copper wire by supply fitting fixing of necessary fixing materials as per direction E.I.C.

Laying of above cable as in item no. 4 on wall/surface incl. S & fitting fixing of required nos. of MS saddles with earthing attachment , making holes etc. as necy. Mending good damages and painting all complete as per direction.

Finishing the end of cable as in item no. 4 by crimping method incl. supplying and fixing solderless socket , tapes, anticorrosive paste & jointing materials all complete as per direction.

Earthing the pole with ¾” inch dia x 6’ ft. long G.I. Earth spike along with 1 x 6 SWG G.I. wire, bolts, nuts and washers of suitable size driven up to a depth of 6.25’ ft. below G.L and restoring the surface duly rammed as per I.E. Rules and direction.

Painting of the existing pole with 2 coats of Synthetic Enamel paint over 1 coat of Red Oxide primer after cleaning and preparation of surface by emery paper upto entire satisfaction of E.I.C..

Supply delivery fitting fixing of of 16A DP MCB with box.

Making protection arrangement of gate light by supply fixing of necessary wire mesh as per direction of EIC.

Testing commissioning the whole installation upto entire satisfaction of E.I.C.

Add: GST @ 18%

Add: LWC @ 1%

M/S. G. P. ENTERPRISE (BID ID -6181646)

STANDARD ENGINEERING (BID ID -6191189)