SPECIAL REPAIR OF ROAD AND PROVN OF ENTRY GATE FOR PHILLORA LINE AT 39 GTC TO FACILITATE AGNIVEERS TRG AT VARANASI CANTT UNDER GE (EAST) PRAYAGRAJ.

Amount

M&L for preparing existing black top bituminous surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air blower to remove all loose dirt/foreign materials and applying evenly a priming tack coat with bituminous primer (Viscosity of Bitumen primer of Grade VG-10) at the rate of 5 Kg per 10 Sqm of surface, complete all as specified and as directed.

M&L for Premix bituminous macadam with broken stone graded aggregate with 4% of paving bitumen binder of viscosity grade VG-30 grade by weight of total mix (Consolidated thickness 75mm or less), laid / rolled and compacted to required gradient and camber using power roller 8 to 12 tonne, complete all as specified and directed.

M&L for bituminous premix semi dense asphaltic concrete 30 mm consolidated thickness with 5.5 % binder content by weight of total mix (Viscosity Grade Paving Bitumen of Grade VG-30) and 3% to 4% filler as per IRC-95, 1987 (filler) prepared in hot mix plant, rolled and compacted to required camber and gradient to uniform smooth surfaces by mechanical paver and using with 8 to 12 tonne power roller, complete all as specified and as directed.

M&L for Marking lines, dashes arrows etc of any description of 100/150 mm width/girth on road surface with retroreflective colour paint using hot applied thermo plastic road marking paint mixed with radium glass beads @ 250 gms/sqm of 2.5mm thick in layer with automatic paint applicator machine fitted with profiles shoe, glass beads dispenser, propane tank & profile shoe heater driven by experienced operator to provide reflectivity and night vision (approximate temperature being 200° Celsius at the time of laying) including cleaning the surface by removing all dirt, dust & all other foreign matters, demarcation at site and traffic control, complete all as specified & directed.

S&F Solar Road Stud / Cat Eye of size 135mm x 105mm x 26mm (leg /shank 50mm) made out of aluminium body with a large solar panel having battery 12V/800mAh with back-up 12 hours of continuous lighting at night, acrylic reflector and aluminium frame with Mix epoxy filler as approved including fixing arrangement as per manufacturer instructions, complete all as specified and directed. Make : 3M company/ Dark eye/ Greenlite/Siner Infrastructure.

Supply and fixing Cat Eye of size 90mm x 100mm x 17mm made out from plastic body with scratch and abrasion resistant micro prismatic polycarbonate and ultrasonically welded lenses of temprature resistance body dynamically designed very high impact strength and ffixed on road with bituminous adhesive as per manufacturers instruction, complete all as specified and directed. Make : 3M company/ Dark eye/ Greenlite/Siner Infrastructure.

Demolition of cement concrete (un-reinforced) in ground floors and paving not exceeding 15cm thickness (below or above ground level), complete all as specified and as directed.

M&L for 75mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregate) as in sub base to flooring/path etc, complete all as specified and directed.

M&L for 25mm thick PCC 1:2:4 type B-1 (using 20mm graded crushed stone aggregate) as in levelling course/sub base to flooring/path etc, complete all as specified.

M&L for Plain cement concrete 1:4:8 type D-2 (using 40mm graded crushed stone aggregate) as in foundations filling and mass concrete, complete all as specified.

M&L for factory made pre cast concrete interlocking paver block having chamfered edge made by table vibratory method using PU mould of any size /shape and pattern ( pattern consists of combination of two or more paver block or as approved by GE) confirming to IS 15658-2006 of 80mm thick, M-40 grade jointed & pointed with grey cement and pigment after filling the joints with sand, complete all as spcified and directed. Note:- (a) The pattern shall be directed by the Engr -in-Charge during exectuion of wk. (b) Sand cushiong shall be measured & paid seperately under relevent item.

M&L for 50mm thick dry sand cushioning for laying of paver block & packing /filling the joints through vibratory compaction by using plate vibrator and watered complete all as specified and directed. Note:-Dry fine sand of best available quality shall be used.

M&L for Brick work with fly ash bricks straight or curved on plan exceeding 6m mean radius built in cement mortar 1:6, complete all as specified.

M&L for 15mm thick cement plaster rendering in CM 1:4 on fair faces of bricks or concrete surfaces & finishing the surface even and fair, complete all as specified.

M&L for preparation of new plaster surface of wall including cornices pilaster etc, and applying two coats of cement base paint, complete as specified and directed.

M&L for Cement concrete (1:2:4) using 20mm graded crushed stone aggregate as cills, steps, siesmic and other similar bands, plinth courses, string courses, lacing courses, parapets and railing upto 60cm height, copings, bed block, kneelers, apex stones, bed plates, roof kerbs round or chamfered on edges, water troughs and the like including weathering, slightly rounded or chamfered angles and throatings etc.including necessary form work complete all as specified and directed by Engineer-in-Charge.

Demolition of brick or stone masonry, built in cement mortar including all quoins, arches, pillars etc but excluding ashlars facings, dressed stone work, complete all as specified and directed.

Demolition of cement concrete of any description and in any position not otherwise specifically described, complete all as directed by Engineer-in-Charge.

Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified.

M&L for 20mm thick granite (of approved type colour) work (table rubbed & polished) in steps, jambs, pillars, window cills, cooking plateform and like laid over and including 20mm thick cement screed bed (1:4) and jointed with grey cement slurry and pointed with white cement (1:2) using marble dust with admixture of pigment to match the shade of granite stone including cutting and moulding the edges half rounded, providing holes for gas pipe in pre-cast slab as well as stone slab of cooking plateform, complete all as specified.

Excavation in trenches not exceeding 1.50m wide and not exceeding 1.50m in depth for foundation etc or for shafts, wells,cesspits, man holes, pier holes etc not exceeding 10 sqm on plan and not exceeding 1.5m depth and getting out in any type of soil, complete all as specified.

M&L for RCC M-25(design mix) using 20mm graded crushed stone aggregate as in foundations including rafts, footings, foundation beams, plinth beams, bases of columns etc. basement slabs, under-reamed piles and mass concrete, complete all as specified and directed by Engineer-in-Charge.

M&L for RCC M-25(design mix) using 20mm graded crushed stone aggregate as in columns, pillars, piers, posts and struts complete all as specified and directed.

M&L for form work to sides of concrete foundations, footings, basis of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams and similar work; vertical or to better with rough finished surfaces of concrete complete all as specified & directed.

M&L for form work to sides of pillars, posts, struts, piers, columns and stanchions and similar works with rough finished surface of concrete complete all as specified & directed by Engineer-in- charge.

M&L for TMT bars, 10mm dia and over, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia complete all as specified.

M&L for TMT bars, 5mm dia and over upto incl 10mm dia, cut to length, bent to shape required including cranking, bending spirally or hooping for column, hooking ends and binding with and including mild steel wire(annealed) not less than 0.90mm dia or securing with clips as in stirrups, complete all as specified

Returning, filling in, including spreading, leveling, watering and well ramming in layers not exceeding 25cm, in any type of soil, complete all as specified and as directed.

M&L for RCC M-25(design mix) using 20mm graded crushed stone aggregate as in wall, retaining wall, basement wall, blast walls and the like, any thickness above top of footings including attached pilasters and buttresses, complete all as specified and directed

M&L for RCC M-25(design mix) using 20mm graded crushed stone aggregate as in slab supported on walls, columns in floors, roofs, landings, balconies, canopies, desk slabs and in shelves & the like complete all as specified.

M&L for preparation of new steel surfaces of any description, over 10cm in width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed.

M&L for Form work to soffits of suspended slab such as roof slabs, floor slabs, landings, plateform and similar work not exceeding 200mm thick for rough finished surfaces of concrete, complete all as specified and directed.

Excavation over area not exceeding 1.5m deep and and getting out in soft / loose soil, complete all as specified and directed.

M&L for Rolling and consolidation to formation surface in cutting or in embanlment using power roller 8 to 12 tonne including watering, filling in soft spots, depressions etc which occur during rolling (for portion coming in cutting/original ground only) to required camber and gradient, complete all as specified.

M&L for Soling (or sub base) 150 mm thick (spread thickness) with broken boulders or quarried stone, interstices filled, surface formed and rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller, complete all as specified.

M&L for 75 mm thick (compacted thickness) WBM, with granite, trap or basalt coarse aggregate of grading 2(63 to 40mm size) or of grading 3 (50 to 20mm size), spread, rolled and consolidated to required gradient and camber with 8 to 12 tonne power roller, complete all as specified.

M&L for Preparing unsurfaced water bound macadam surfaces by brushing with wire brushes for removing caked mud etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air blower to remove all loose dirt/foreign materials and applying evenly a priming tack coat with bituminous primer (Viscosity of Bitumen primer of Grade VG-10) at the rate of 10 Kg per 10 Sqm of surface,complete all as specified and as directed.

Removing excavated material (soil) to a distance n exc 50 m and depositing where directed at a level n exc 1.5 m above the starting point, complete all as specified.

M&L for Continuous brick edging with width equal to the length of brick of sub class B, old size brick (crushing strength 75 Kg/Sqm) laid dry on ends vertically including necessary excavation and earth works and tamping ground around brick in any type of soil and removal of surplus soil etc to a distance not exceeding 50 mtr complete all as specified and directed.

M&L for Point wiring complete with PVC insulated unsheathed 1100 volts grade cable 1.5 Sqmm(nominial area) FRLS having stranded copper conductor single core drawn in and including 20mm dia rigid PVC conduit medium grade ISI marked including all conduit accessories for concealed pressed steel terminal box of required size not less than 1.6mm thick factory made duly painted inside and outside with two coats of black bituiminious paint over and including a coat of red oxide primer with 3mm thick top cover of plastic laminated sheet/required colour for mounting switch socket/fan regulator etc including 1.5 Sqmm PVC insulated unsheathed cable FRLS having copper conductor as earth wire and connected earth dolly as required at the site complete for the following:-

One light or fan point controlled by one way switch

One 3 pin socket outlet 5 Amps on independent board but with 2.5 sqmm copper conductor cable

All as per Sr item No. 40 above but with 2.5 Sqmm copper conductor cable for socket outlet 15 Amps

S&F switch piano flush button single pole one way 6 Amps, 240 volts all as directed by Engineer-in-charge

S&F switch piano type 15 Amps single pole one way ISI marked, complete all as specified.

S&F Socket flush type 5 pin 5 Amps shutter complete all as specified.

S&F socket outlet 6 pin 5 & 15 Amps flush type ISI marked, complete all as specified.

S&F Ceiling rose surface bakellite 65x25mm three terminals 240 volts, complete all as specified.

M&L for sheet metal enclosure factory made, Double door,4ways, single pole with 200 Amps rated bus bar for housing MCBs/isolators complete including provn of blanking plate for unused ways complete all as specified and directed.

S&F MCB SP, 6 to 40 Amps single pole 230 volts,10 KA complete all as specified and directed.

S&F MCB SPN 40 Amps, 230 volts, 10 KA complete all as specified and directed

Supply and fix in repair LED integral flood light luminaires 170 watt in powder coated with aluminium die cast housing and frame,high efficiency,long life LEDs,loop in loop out connector,10 A G.F.P for each wiring heat resistant toughned lear glass cover and IP 66 protection complete assembly with LEDs,driver and accessaries pre wired up to terminal block in control gear compartment including connection on pole complete all as specified and directed.

Supply and fixing post top lantern LED type 40 watt 230 watt volts AC outdoor type with decorative post top for 360 degree indirect light IP 65 protection with impact and corrosion resistant complete with driver and lamp complete all as specified.

Supply, laying and testing cable XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of size 25 sq mm 4core, complete all as specified.

Supply, laying and testing cable with cable gland, XLPE Insulated ,screened, PVC bedded, galvanized steel strip or wire armoured, electric power cables (heavy duty) 1100 Volts grade with stranded aluminium conductor of sizes 10 sq mm 2 core, complete all as specified.

M&L for sand cushioning with dry local sand for cable protecting under ground cable (8 cm before laying the cable and 15 cm after laying the cable) in trenches including punning the sand upto 18 cm thick and consolidated complete all as specified and directed. Note : Punned thickness 18 cm shall be measured only.

Supply and laying dry well burnt locally available brick sub class 'B' modular bricks laid flat with width equal to the length of whole bricks over cable as cable protection complete all as specified and directed.

M&L for bore hole for passing cable through / insertion of 80/50mm dia GI pipe under PCC road/ taxi track/ runway/ hard standing upto the depth 450mm to 1200 mm complete all as directed by Engineer-in-charge. NOTES :- (i) Cost of equipments, tools & plants,material required for boring shall be deemed to be included in unit quoted rates above. (ii) GI pipe shall be measured and paid separetely.

S &F for 40 mm dia GI pipe 'light grade' ISI marked including fittings such as bends, tees, sockets etc fixed on wall/pole or laid in trenches under road crossing/hard standing including taking down old /unserveciable existing pipe complete all as specified and directed. NOTE : Excavation and earth work shall be measured & paid separately.

M&L for bus bar box of sheet metal 3 mm thick powder coated, having 4 Nos. aluminium bus bar of rating 200 Amp mounted on insulator including 01 No. of MCCB 4 pole 63 Amp 415 volts with thermal magnetic release as incomer, breaking capacity 25 KA inside the box and suitable fixing arrengement like flat iron clamp of size 25x3mm with hinged cover & locking arrangement including grouting of feeder piller box 60 cm above ground level by providing 90 cm long angle iron of size 40 X 40 X 6 mm welded on all the four corner embedded in PCC 1:2:4 using 20 mm graded stone aggregate complete duly painted with two coat of synthetic enameled paint over a coat of red oxide primer fixed in repair outdoor type duly fitted on complete all as directed by Engineer-in-charge.

Supply and errection of steel tubular pole swaged type 410-SP 31(9.0m long pole) as per IS:2713 (part I to III) 1980 complete with cast iron base plate, pole cap, mild steel bolt, nuts and screws complete including dismantling of exsiting pole all as specified including consisting of following works:- (a) Excavation in trenches not exceeding 1.5 mtr wide & 1.57 mtr deep for pole foundation & getting out in soft/loose soil, returning filling in the excavated of soil after fixing the pole in foundation ramming earth around in layer not exceeding 25 cm thick and disposal of surplus soil to a distance not exceeding 50 mtrs complete all as specified and directed. (b) M&L for PCC 1:4:8, type D2 (using 40mm graded crushed stone aggregate) in foundation 900mmx600mm cross section and planting depth 1.5 mtr for concrete encasing the pole upto GL complete all as specified and directed.

(c) M&L for providing PCC 1:3:6, type C-1 (using 20mm graded crushed stone aggregate) for plinth block/collar above GL 500mm high and 450mm dia complete all as specified and directed. (d) M&L for painting of pole externally with one coat of black bituminous paint (upto planting depth) and above plinth block concrete collar with two coat of aluminium paint over a coat of red oxide primer including preparation of surface including painting of 30 cm wide bands 3 Nos with synthetic enamel paint of appropriate colour in alternate layer upto the height of 1.5mm above plinth block. (e) M&L for writing letter or figures (Block Roman, Italic as Indian) with thick synthetic enamel paint of apprised shade not exceeding 5 cm height including numbering of pole complete all as specified and directed. NOTE : Manufacture's test certificate will be produced before execution work. MAKE : National tubing Co Kanpur or BCW Kanpur or M/s Sohan Lal & Sons or United Engineers, Kanpur.

Supply and fix in repair for hot press moulded PVC junction box of size 230mm x 170 mm x105 mm with 200A TPN Aluminium bus bars mounted/fixed on porcelien insulator shock and rust proof,cable entry from bottom and other sides,100% weatherproof, with pole mounting arrengement temperproof,fire retardant class FV-0 as per IS 11731 part -II or V-O as per UL-94 including flat iron clamp of size 25 x 3 mm with nut and bolt complete all as specified and directed. Make :- Sintex/Naithani plastic works/Supreme industries

S&F for LED bulk head light fitting 10W LED 600 Lumen enclosed in polycarbonate body weather proof, LED lighting fixture with co extruded polycarbonate body environmental friendly energy efficient complete with all accessories prewired and making connection with and including 23/0. 0076 flexible copper wire three core from connector to ceiling rose not more than 1.2 mtr fixed n wall firmly complete all as specified and directed .

M/s R.V. Constructions (BID ID -3286349)

M/s R.S. Enterprises (BID ID -3284667)

M/S A P CONSTRUCTION (BID ID -3286228)

M/s Aradhana Enterprises (BID ID -3286262)