Civil work

Amount

Earth work excavation for foundation (for narrow excavation) in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the surplus earth within the compound in places shown by the departmental officers with an initial lead of 10 mts and initial lift of 2 mts. and clearing and levelling the site, etc., complete complying with standard specification.

Earth work open excavation in all soils and sub-soils and to full depth as may be directed except in rock requiring blasting inclusive of shoring shuttering, bailing out water wherever necessary and depositing the excavated earth with a lead of 10 mts. within the compound in places shown by the departmental officers and clearing and levelling the site, etc., complete complying with standard specification.

Cement Concrete 1:5:10 (One Cement, Five crushed stone sand and Ten hard broken stone jelly) using 40 mm gauge hard broken granite stone jelly for foundation including dewatering wherever necessary and laid in layers of not more than 15 cm thick well rammed, consolidated and curing etc. complete complying with standard specification

Refilling with excavated earth other than crushed stone sand with an initial head load of 100 mts. and depositing the earth as shown by the departmental officers in layers of not more than 15 cm thick well rammed, watered and consolidated etc. complete complying with standard specification

Supplying and FILLING GRAVEL in 'foundation and basement in layers of not more than 15cm.thick well rammed watered and compacted -1m3 etc., complete complying with standard specification.

Supplying and filling basement with conveyed earth from 10 km well rammed watered and compacted etc., complete complying with standard specification.

Supplying and filling in foundation, basement, etc with filling stone dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers.

Brick work in Cement Mortar 1:5 using best quality of Fly Ash Brick of size 230x110x70mm for foundation and basement including curing, etc., complete complying with standard specifiction.

Foundation & Basement

Super structure in GF

Brick work in Cement Mortar 1:6 using best quality of Fly Ash Brick of size 230x110x70mm for foundation and basement including curing, etc., complete complying with standard specifiction.

Foundation & Basement

Super structure in Ground Floor

Super structure in First Floor

Super structure in Second Floor

Super structure in Third Floor

superstructure in Fourth floor

Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oak joists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation. (Payment for centering shall be given after the concrete is laid)

Supplying and erecting centering for sides and soffits including necessary supports and strutting upto 3.29 M height for plane surfaces as detailed below in all floors with all cross bracings using Mild Steel sheets of size 90 x 60 cm and 10 BG stiffened with welded Mild Steel angle of size 25mm x 25mm x 3 mm for boarding laid over silver oak joists of size 10cm x 6.50 cm spaced at abote 90 cm centre to centre and supported by casurina props of 10cm to 13 cm dia spaced at not more than 75 cm centre to centre etc. complete complying with the standard specificaiton. (Payment for centering shall be given after the concrete is laid).

For plane surfaces such as RCC floor slab, roof slab, beams, lintels, bed blocks, landing slab, waist slab, portico slabs and beams, etc.

For plane surfaces such as vertical slab, side slabs of boxing, vertical drops, facia, vertical wall, etc.

For plane surfaces such as rectangular or square RCC columns, sunshades, top and bottom slab of RCC boxing, etc.

Providing additional strutting to centering of RCC slabs of plain surface for every additional 1.0 metre height or part there of but not less than 30 cm, over the initial 3.00 metre height from floor level using casurina props of 10cm to 13cm dia including cross bracing etc., complete complying with standard specification and as directed by the department officers.

Providing and laying in position, standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/m3 and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m) 7670 kg. of crushed stone crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess

Foundation & Basement

Super structure in Ground Floor

Super structure in First Floor

Providing and laying in position, standardised concrete Mix M-25 Grade in accordance using 20mm with IS:456-2000, and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 350 kglms and maximum water cement ratio of 0.50, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3'3 cu'm') 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu'm') 7670 kg' of crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

Basement Floor

Foundation & Basement

Super structure in Ground Floor

Super structure in First Floor

Super structure in Second Floor

Super structure in Third Floor

Superstructure in Fourth Floor

Providing and laying in position, Standardised Concrete Mix M-30 Grade in accordance with IS:456-2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cementcontent of 400 kg/m3 and maximum water cement ratio of 0.45, including admixture (plasticiser / superplasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5.0 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m') 7670 kg. of crushed stone crushed stone sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers. The coarse and fine aggregates to be used should comply with the requirements of IS Standards. (No separate payment will be made by the Department for the excess usage of materials).

Substructure in Basement Floor

Plain Cement Concrete 1:2:4 (one cement, two crushed stone sand and four hard broken stone jelly) using 20mm jelly for wearing coat including laying, compacting, finishing and curing, etc., complete as per standard specificatins and as directed by the departmental officers.

Supplying, fabricating and placing in position Mild Steel / Ribbed Tor Steel grills for all RCC works as per design given including cost of steel and G.I. binding wire in all floors etc. complete complying with standard specification. (Contractor has to make his own arrangements for the supply of steel and binding wire).

Brick partition walls of 11.00cm thickness using best quality Fly Ash bricks of size 230x110x70mm in Cement Mortar 1:3 (One Cement and Three crushed stone sand) using hoop iron reinforcement if found necessary including curing etc. complete and as directed by the departmental officers. (Hoop iron reinforcement will be measured and paid for separately).

Superstructure in Ground Floor

Superstructure in First Floor

Superstructure in Second Floor

Superstructure in Third Floor

Weathering course in brick jelly lime concrete using broken brick jelly of size 20mm uniform gauge in pure slaked lime (no crushed stone sand to be used) to the proportion of brick jelly to lime being 32:12.5 by volume and laid over the RCC roof slab in a single layer of required slope and finished by beating the concrete with wooden beaters of approved pattern, keeping the surface constantly wet by sprinkling lime jaggery water, etc., complete as per standard specification and as directed by the deparmental officers.

Finishing the top of roof with one course of machine pressed tiles of size 230mm x 230mm x 20mm of approved quality set in Cement Mortar 1:3 (One Cement and Three crushed stone sand) 12mm thick mixed with water proofing compound conforming to ISS at 2% by weight of cement used and the joints pointed neatly to full depth of tiles with the same cement mortar mixed with red oxide and water proofing compound including curing etc., complete complying with standard specification and as directed by the departmental officers.

Brick jelly lime concrete using broken brick jelly of size 40mm uniform gauge in pure slaked lime 1:2:5 (one cement two crushed stone sand and five brick jelly) by volume and laid over the toilet depression portions in a single layer of required slope etc., complete as per standard specification and as directed by the deparmental officers.

Cement Concrete 1:5:10 (One cement, Five crushed stone sand and Ten hard broken stone) using 40 mm gauge hard broken jelly for flooring including laying, consolidating, finishing, rendering the top surface rough to receive the floor, curing, etc. complete complying with standard specification. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers.

Cement Concrete 1:3:6 (One Cement, Three crushed stone sand and Six broken stone jelly) using 40mm size hard broken stone jelly for dummy columns, excluding cost of centering shuttering reinforcement grills and fabrication charges but including curing etc. complete. (Reinforced Cement Concrete 1:2:4 for slab to be extended upto top of splashing with pressed tiles and future extension rods to be embedded in CC 1:3:6 (One Cement, Three crushed stone sand and Six hard broken stone jelly). Dummy columns should be at least 1 metre height)

Ground Floor

Third Floor

Fourth Floor

Supplying and fixing in position best approved of BIS quality PVC rain water down fall pipes having a pressure of 4 kg. / sq.cm including cost of necessry PVC shoe, PVC bend, cast iron gratings of required diameter and special clamps, brass screws, nails, etc., and fixing of cast iron gratings at junction of parapet and the RCC roof slab including finishing neatly etc., complete. The rate shall be inclusive of cast of removable cast iron grating. The PVC pipe shall be fixed in wall with special type of "U" clamp at the centre of the pipe line in addition to those for more than 3.0 metre pipe length, etc., complete complying with standard specification.

160 mm dia PVC pipe

110 mm dia PVC pipe

Stainless Steel (Salem Stainless Steel) Door Frame (Box Section using Stainless Steel Plate of 1.6mm thick) of size 100mm x 60mm with a rebate of 30 / 35mm x 15mm on one side of the frame including supplying and fixing dovetail splayed end stainless steel hold fast etc.,

Supplying and fixing Solid core Particle board flush shutter of nominal thick of 35 mm with Teak ply on both sides and with T.W. lipping alround conforming to IS 2302 including supplying and fixing cost of wind appliances and furniture fittings such as 1no .200 x 12 mm aluminium tower bolt 2 nos. 150x12 mm aluminium tower bolts 1no. 250 x 16 mm aluminium aldrops, 2 nos.200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete as directed by the departmental officers.

Single leaf:

Supplying and fixing solid core particle board flush shutter of nominal thick of 35 mm with necessary T.W. internal lipping conforming to IS 2302 with both sides alround Teak ply 3mm thick including supplying and fixing cost of wind appliances and furniture fittings such as 1no .200x12mm aluminium tower bolt 2nos. 150x12mm aluminium tower bolts 1no. 250x16mm aluminium aldrops, 2 nos. 200mm ‘D’ type aluminium door handle and door stopper with bush etc., complete as directed by the departmental officers.

Double leaf

Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames. 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter.

Supplying and fixing PVC sliding door for Differently Abled persons toilet in with Solid PVC door shutters using 19 Gauge 19mm MS square tubes for styles and outer frames, 15mm MS square tubes for top, lock and bottom rails. The steel tubes shall be covered with 5mm thick solid PVC sheets. Shutter using 5mm thick solid PVC sheets for panelling shall rigidly fixed in position including necessary furniture and fittings. The over all size of styles shall be 50mm x 30mm. The over all size of top rail, Lock rail and bottom rail shall be 75mm x 30mm. The over all size of frames shall be 50mm x 45mm, with suitable rabate for housing the shutter including slidng arrangements.

Fabricating Supplying and fixing in position of Aluminium anodised Powder Coated of single leaf door with half panelled with 12mm thick both side laminated particle board at bottom and half glazed using 5.50mm thick Plain glass at top.The outer frame shall be with aluminium box section 101.60x44.45x3.18m at 2.319kg/m and Shutter frame made of section Vertical & Top rail: [email protected] kg/m and Bottom rail: 100x44.45x2.50mm@ 1.974 kg/m, Lock rail : 50x44.45x2.5mm @ 1.292 kg/m,Alu. Clips: 17.15x17.27x1.50mm @ 0.176 kg/m,Alu. Handle: 100x30mm @ 0.988 kg/m and necessary accessories such as aluminium clips, rubber beading, PVC felt, handle for a length of shutter (both sides), locking arrangements, furniture fittings such as aluminium tower bolts-250x12mm - 1 Nos., aluminium tower bolt 200x12mm - 1No., aluminium Hydraulic door closer - 1No ., lock-1No., Door stopper with rubber bushincluding cost of materials labour charges and power consumption charges required for fabrication including chipping, dismantling and making hole to the required extent in RCC column, beams, masonry with power drill wherever necessary and redoing the damaged portion to the original condition after fixing etc., complete. All the Alu. Section are to be anodised with matt finish under

electricaly controlled conditions in accordance with IS 1868/1962 for an average anatic film thickness of 15 microns etc., complete.Aluminium sections,and furniture fittings shall be got approved by the Executive Engineer incharge.

Fabricating, Supplying and fixng in position of steel sheeted windows ( Three Leaves) with the following specifications. Outer frames of windows made of 'Z' section F7D of size 33 x 25 x 3mm at 1.419 kg/ m and mullion 'J' section (F4B) of size 46x25x3mm at 2.28kg/m and shutter section of made of F7D of 33x25x3mm at 1.419 kg/m as specified in IS 7452/1990. Each openable shutter should not exceed a width of 600mm to enable separate operations and easy maintenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18x5mm MS Flat at 0.70kg/m at 3 Nos. for each shutter and additional diagonal stiffners of the same MS flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR Sheets in position firmly.2 numbers of sturdy hinges and one number of handle-cum-latch of special type made with 18x5mm MS flats are revetted to the shutters at an appropriate height in window. suitable opening is left for its easy operation. a stopper square rod for handle is provided in the mullion section at suitable place to catch the window handle. each window shutter having an adustable stay made out of 18 x 5mm at 0.70 kg/ m MS flat of lenght 320mm with three adjustable position.A matching peg is provided in the outer frame of the window at suitable place. 4 Nos. of hold fasts of 120mm length spliced at the ends are welded to the outer frame of the window by using MS flat of 18x5mm

at 0.70kg/m, welded to the shutter at two place equivalent from each from top and bottom of the shutter.An MS square bar of 12mm size is welded to the inner face of the window at an equal interval not exceeding 100mm edge between them. All members are painted with one coat of anti-corrosive red oxide primer as directed by the departmental officers.All sections should be in confirmed with IS 7452/1990.The cost includes cost of all materials, labour charges and other incidental charges, etc., complete

Fabrication, supply and fixing in position of 'N' type ventilators using M.S. angle of size 25 x 25 x5 mm for frame and M.S. Flat of size 20 x 3 mm for fixing the weld mesh and using 25 x 22 x3 mm 'T' section for frame glass. Special type of Hold fast welded to the frame of 45 degree inclined towards centre for wall and fxing the weldmesh 25mm square including cost of 3mm thick pinheaded glass panes for all panels and fixing the glass panels with necessary clips & putties with required bolts, nuts and washers and one coat of red oxide primer etc. including necessary dismantling, making holes in RCC columns, beams, masonry wherever necessary with power drill to the extend required and made good to the original conditions after fising as directed by the departmental officers.

UPVC Window Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work

UPVC Ventilator Specification: Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Louvered Ventilators of from the profile the size of outer frame 60mm x 58mm and shutter profile size of 60 x 78mm both profiles are reinforced with GI/1mm 125GSM and 100% corrosion free, the profile are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with all over the edges of frame and shutter. The corners and joints should be welded and cleaned. Radiations pin headed glass 4mm thick should be provided in the louvers. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The ventilator should be got approved from the Executive Engineer before use on work.

THREE TRACK SLIDING UPVC WINDOWS: Supply and fixing of UPVC (Un plasticised Poly Vinyl Chloride) window frames having 3 tracks for 3 shutter of UPVC profile section of size 112mmx52mmx112mm having outer wall thickness of 2.3mm (+/- 0.3 mm) with 3 box multi_ chamber construction. Sliding shutter shall be made of 66mmx42mmx50mm having outer wall thickness of 2.3mm (+/- 0.3mm). All the Corners and Joints of the frame & Sash Shall be mitred cut & fusion welded without any mechanical joint. All welded joints are to be neatly trimmed & feature grooved/raised nib finish so as to make the finished products free from all sharp edges & burrs. System shall have adequate drainage mechanism to permit the escape of water from horizontal member beneath each sealed unit. System shall be provided with suitable UPVC beading for glazing of size 24.5mmx16mm for fixing 5mm thick glass and interlocking profile of size 45mm x 36mm, duly cut at correct degree & fitted with EPDM gaskets. Windows has to be provided with verity of security device like Crescent lock, nylon rollers ect. as per the requirements compliant with relevant specification and as directed by department personnel. The complete window shall be fixed into the prefinished opened places, by drilling & fixing through the outer frame using high quality fasteners & silicon sealant is applied to fill up the gap between wall & window frame for leak-proof installation, and completion. GST Exclusive

Supplying and fixing mild steel iron grill for Windows Ventilators and grill gate etc., including one coat of red oxide primer using M.S. angle of size 40x40x6mm and grill using 20x6mm MS flat and necessary hold fast with M.S. angle of size of 40x40x6mm - 230mm long spliced at end is to be provided appropriate places for fixing the grill etc complete complying with standard specification. The type design for the grills should be got approved by the departmental officers before execution.

Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x5mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat crushed stone sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail. section in the door in single single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete.

single leaf

Manufacturing supplying and fixing of steel door with the following specification MS angels of size 40x40x6mm are used for the outer frames and M.S. angles of size 35x35x6mm for the shutter frames stiffeners with 32 x 6mm M.S flat is provided at required intervals in the shutter frame. 18-gauge C.R. sheet laid as panel in the shutter and welded intact. M.S. flat 18x5mm is welded over the 32 x 6mm M.S. flat sandwitching the C.R. sheet in between additional stiffeners with 18x5mm M.S. flat is provided diagonally at the rear side of the shutter, 3nos. of hinges in case of single leaf and 6nos. of hinges in double leaves shutter to be provided 6nos. of holdfasts 120 mm in length made of angle section spliced at the ends are welded to the outer frames of the door. Tower bolts 2nos. one at the top and the other at the bottom are provided 1no. Aldrop is provided incase of double leaf door at lock rail section in the door in single leaf door, one more aldrop is provided in the inner lock rail section of the door One rotaing locking arrangements for the inner side of the door and additional provision for locking arrangements for lock is provided on the rear side of the door at an appropriate place. Incase of double leaf door M.S.Flat 32 x 3mm at 1.1Kg/m is provided on the one shutter t conceal the gap between the two shutters.at an appropriate place in the door. A tie bar is provided at the bottom of the frame to prevent twisting of frame during transportation and fixing. All members are given a coat of red oxide primer as directed by the departmental officers. The rate includes cost of all materials, labour charges, transportation to site of work, loading, un loading and all other incidental charges etc., complete.

Double leaf:

Provinding Strong Room Door

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick at required locations to a height of 900 mm from finished floor level welded to 38mm dia Stainless Steel pipe post of 1.00mm thick as vertical at 900mm centre with 2 Nos. of 25mm dia intermediate horizontal stainless steel pipe of 1.60mm thick in between. The vertical pipe has to be welded to the 100 X 100 X 6mm MS base plate encased in the base concrete. The rate is inclusive of the charges for cutting, bending, welding, grinding, polishing, conveyance, electrical charges, etc. complete.

Manufacturing, Supplying and Fixing of Stainless Steel Hand rails for staircase near wet riser using 50mm dia 304L Grade Stainless Steel pipe of 1.60mm thick will be provided with tubular supports made of 304L Grade Stainless Steel pipe of 25mm dia of 1.60mm thick welded to the railing. The supports will be grouted into the wall and provided with 93.00mm thick Stainless Steel circular base plate of 304 Grade. The rate shall included for grouting into concrete with necessary supporting arrangements the hand rail in floor polishing buffing, bonding, cutting, grinding, conveyance, welding charges, electrical charges, etc. complete.

Supplying and fixing GI pipe handrails for Differently Abled persons using 50mm dia GI pipe double handrail at a height of 800mm and 900mm from floor level with 25mm thick MS square rods as balusters embedded in the concrete and welded with pipe at 60cm centre to centre as shown in CA Job No. 9123 / 1 including cutting, welding, bending and fixing charges and applying one coat of red oxide primer for MS members as directed by the departmental officers

Supplying, fabricating, erecting and fixing gyp board false ceiling upto a ceiling height of 4.5m from floor level etc., complete and as directed by departmental officers. Using plain sheets (10mm thick)

Providing Cornice Work for Gyp Board False Ceiling etc., complete and as directed by departmental officers.

Providing and fixing Acoustic Wall panelling (Equvilent to Armstrong) in channelled wood works perforated panel of width 192mm, thickness of 15mm and length of 2400mm or as per required by the Departmental engineer made of a High Density fibre board with minimum 725Kg / m3 density subtract with laminated facing as per the approved shade and finished and a melamine balancing layer on the reverse side. The boards shall have a special perforated pattern where the visible surface has a "Helmholtz" flutted perforation of 3mm width and 21mm of visible panel each. The edges of the panels shall be " Tongue and grooved" to receive special clips for installation. The back of the Perforated panel shall have sound absorbing not woven acoustical fleese having NRC of 0.52. The panel shall be mounted on special Aluminium splines using clips provided by Armstrong and approved by the Engineer - in- Charge . Installation: install alimininum box section (provided by others of section 50mmx25mm or as approved by the Engineer_in_charge on the sold wall horizontally using screws and plugs at spacing of 600mm c/c. screw the aluminium extruded keel foe channel wood works provided by armstrong over the lowest and second aluminium section at an on center distance of 600mm Place the inside clip on the groow end of the panel along the aluminium keel and then place the toung end of the next panel. continue installing row of panels by inerting tounge in to the groow of the earlier inserted panel and progressively installing inside clips in to the next keel till the actual height is achieved. Finish of the edges using wooden moulding of matching colour provide by others). installation to be carried out by Armstrong trained installation team and installation should be carried as per Armstrong recommented procedure.

Dadooing walls with colour designed digital printed ceramic tiles of size 300mm x 450mm x 8mm and above in best approved quality tiles set in Cement Mortar 1:2 (One Cement and Two crushed stone sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification ( Non branded) and as directed by the departmental officers.

Dadooing with Ruby Red, Raw Silk Granite tiles - (Superfine polished with Machine cut edges) of size 2'0" x 1'0" or 1'0" x 1'0" or 1'0" x 0'6", of 10 mm thick in best approved quality in Cement Mortar 1:2 (One Cement and Two crushed stone sand) 10mm thick and pointing the joints with white cement mixed with colouring pigments at the rate of 0.40 Kg. / sq.m. neatly in all floors, curing, etc., complying with standard specification ( Non branded) and as directed by the departmental officers.

Paving the floor with best approved quality fine polished Granite Stone Slabs of size 1200 x 600 of 18 / 20mm thick of Synthetic Grey, Paradise and similar varieties with machine cut edges laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs with required cement slurry and laid in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments etc., The granite stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Paving the floor with best approved quality fine polished Kota stone slabs of size 600 x 600 of 18 / 20mm with machine cut edges and matching marble slab not less than 100mm width other than Adanga Marbles as border laid over a cement mortar bed of 20mm thick using cement mortar 1:3 (One cement and three crushed stone sand) fixing the slabs in true right angles with minimum possible width of joints and pointing the joints with white cement mixed with mathcing colouring pigments and polishing with floor polisher to a high degree of finish etc., The kota stone slabs and other materials to be used shall be got approved by the Executive Engineer concerned before use on work, etc., complete as per standard speicification.

Paving the floor with best quality Double Charged Vitrified Tiles 600x600x8mm of approved colour, shade and quality laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works).

Paving the floor with best Industrial Vertified Tiles of size 600 x 600 x 10mm of approved colour, shade, quality and textured surface that offers excellent non slip property with high coefficient of friction which is most suited for public places that encounter high traffic of patients public, wheel chairs, stretcher, etc., laid in cement mortar 1:3 (one cement and three crushed stone sand) 20mm thick in all floors and the top pointed with the white cement mixed same colour pigments etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Flooring with Anti skid Self Designed Colour Ceramic Tiles of size 305 x 305 x 6mmceramic tiles laid over 20 mm thick cement mortar 1:3 (One Cement and Three crushed stone sand) base mortar over the existing slab / floor including cutting the tiles to the required size with special cutter wherever necessary, laying in position and pointing with white cement mixed with colouring pigment at the rate of 0.3 Kg. / sq.m. etc., complete complying with standard specification. (The make and brand of the tiles should be got approved by Executive Engineer before use on works).

Paving the floor with Cement based Hydraulically pressed Anti skid tiles (pattern design) of 20mm thick of approved quality and colour laid in Cement Mortar 1:3 (One Cement and Three crushed stone sand) 20mm thick and pointed with white cement mixed with colouring pigment at the rate of 0.40 Kg. / sq.m., curing, etc., complete complying with standard specification and as directed by the departmental officers. (The make and brand of the tiles should be got approved by Executive Engineer before use on works)

Supplying and fixing in position Urinal partition with White Marble slab (Adanga) 18 mm to 20 mm thick of 4'0'' x 2'0''size and above of best quality including dismantling masonry, if necessary and re-doing the same to original condition, etc., complete complying with standard specification. (The Marble slab should be got approved by the Executive Engineer before use on works).

Providing PVC corner beeding of approved quality etc., complete complying with standards and as directed by the departmental officers.

Provided Jet Black in colour granite slab 4'x2" 18-20mm thick of approved quality for working table etc., Complete complying with standards and as directed by the departmental officers.

Nosing the granite for with requied shape and design with hand machine etc., complete complying with standard specification and as directed by the departmental officers.

Manufacturing, supplying and fixing Precast Reinforced Cement Concrete slabs of following thickness in RCC 1:2:4 (one cement, two crushed stone sand and four aggregates), using following HBGS jelly excluding cost of reinforcement steel in position but including cost of moulding charges, casting of slab, finishing, curing and fixing in position in all floors etc., complete complying with standard specification and as directed by the departmental officers.

50mm thick slab

75mm thick slab

Manufacturing, supplying and fixing in position plain cement concrete precast pavement slab of size 450mm x 450mm of 50mm thick in Cement Concrete 1:2:4 (One cement, Two crushed stone sand and Four jelly) using 20mm HBG stone jelly including cost of moulding charges, casting of slab, finishing, curing, fixing and pointing the slab with CM 1:3 (One Cement and Three crushed stone sand) to full depth of slab etc., complete complying with standard specification and as directed.

Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two crushed stone sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying withstandard specification and as directed by the departmental officers. (The rate is inclusive of necessary planking for panelling wherever necessary and as directed by the departmental officers).

Plastering with Cement Mortar 1:5 (One cement and Five P. sand), 12mm thick in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Special ceiling plastering and finishing the exposed surface of all RCC items of work such as slabs, beams, sunshades, facia, canopy slab, staircase waist slab, landing slab etc., with Cement Mortar 1:3 (One Cement and P.sand) 10mm thick including hacking the surfaces, providing cement mortar nosing, beading for sunshades, staircases, steps, landing slabs and curing, etc., in all floors complying with standard specification and as directed by the departmental officers.

Plastering with Cement Mortar 1:3 (One cement and three P. sand), 12mm thick with WPC in all floors including curing etc. complete complying with standard specification and as directed by the departmental officers.

Plastering the surface of walls with Cement Mortar 1:3 (One cement and p.sand), 20mm thick in all floors including curing etc., complete complying with standard specification and as directed by the departmental officers.(with WPC)

supplying and filling 20mm size HBG Stone jelly for dispersion trench as directed by departmental officers complying with std specification.

supplying and filling 40mm size HBG Stone jelly for dispersion trench as directed by departmental officers complying with std specification.

Providing polymer coating with specification The surface shall be cleaned to remove all dust, foreign matters, lose materials or any other deposits of contamination by rubbing with wire brush. Cracks and depression shall be filled up by fillers (cement crushed stone sand mortar as per recommendation of suppliers). Prepared surface shall be thoroughly pre-wetted for one hour. Preparation of polymer modified cementitious slurry:-Dry blend and liquid blend shall be mix into the desired ratio as per recommendation of supplier. The mix shall be stirred thoroughly, until no bubbles remain in the mix. Any lump found in mix shall be removed First coat of polymer modified cementitious slurry shall be applied by brush on wet cleaned surface.Subsequently, fiber glass cloth shall be laid over first coat of polymer modified cementitious slurry.Second coat of polymer modified cementitious slurry shall be laid over fibre glass cloth.Polymer modified cementitious brush topping shall be applied over second coat of polymer modified coating.

Painting new iron works such as steel doors, windows, ventilators, window bars, balustrades etc., with two coats of best approved first quality and colour of synthetic enamel paint over the existing red oxide priming coat in all floors excluding cost of priming coat etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting new wood work with two finishing coats of synthetic enamel ready mixed paint of approved quality and colour over one coat priming coat in all floors including the cost of primer etc., complete complying with standard specification. (The make, quality and colour of paint should be got approved by the Executive Engineer before use on works.)

Painting two coats of newly plastered wall surface with ready mixed plastic Interior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Painting two coats of newly plastered wall surface with ready mixed plastic Exterior emulsion paint of first class quality and of approved colour over a priming coat including thorough scrapping, clean removal of dirt, and including necessary plaster of paris putty, wherever required etc., complete complying with standard specification.

Supplying, laying and jointing CPVC pipes (chlorinated Poly vinyl chloride) pipe( Higher pressure rating with higher pipe thickness) Standard Dimension Ratio- 11)of approved qualityand best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using SOLVENT OF 118ML (but excluding cost of such specials) and fixing into wall with teak wood plugs,CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary caffolding charges upto 4 metre heightabove ground level, etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. Internal Water Supply. Above Ground Level

40mm dia Cpvc pipe

32mm dia Cpvc pipe

25mm dia Cpvc pipe

20mm dia Cpvc pipe

Supplying, laying and jointing CPVC pipes (chlorinated Poly vinyl chloride) pipe( Higher pressure rating with h ig her pipe thickness) Standard Dimension Ratio- 11)of approved qualityand best variety conforming to BIS of the following dia including cutting, threading and fixing CPVC specials using SOLVENT OF 118ML (but excluding cost of such specials) and fixing into wall with teak wood plugs,CPVC clamps and screws making holes on the wall (or) drilling holes in the roof and making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The CPVC pipes shall be got approved by Executive Engineer before use on works. Above Ground Level (External Water supply)

50mm dia Cpvc pipe

40mm dia Cpvc pipe

Supplying, laying and jointing CPVC pipes(chlorinated Poly vinyl chloride) pipe( Higher pressure rating with h ig her pipe thickness) Standard Dimension Ratio- 11)of approved quality and best variety conforming to BIS of the following dia including cutting, threading and fixing PVC specials using SOLVENT OF 118 ML (but excluding cost of such specials) and fixing making good the dismantled portion to original condition with necessary brick work / cement concrete and plastering neatly wherever necessary with necessary scaffolding charges upto 4 metre height above ground level, etc., complete complying with standard specifications. The PVC pipes shall be got approved by Executive Engineer before use on works. ( External ) Below Ground level

65 mm dia Cpvc pipe

50 mm dia Cpvc pipe

Supplying and fixing in position the following CPVC Unions of heavy type and approved quality and good variety excluding fixing charges but including necessary cutting and threading of GI pipes, jointing the CPVC specials and painting with two coats with good variety and best quality synthetic enamel paint over a coat of red oxide primer and jointing the specials with pipe line using shellac etc., complete complying with standard specification.

50 mm dia CPVC Union

40 mm dia CPVC. Union

32 mm dia CPVC. Union

25 mm dia CPVC. Union

Supplying and fixing in position the following CPVC Specials of heavy type and approved quality and good variety excluding fixing charges but including necessary cutting and threading of CPVC pipes, jointing the CPVC specials and painting with two coats with good variety and best quality synthetic enamel paint over a coat of red oxide primer and jointing the specials with pipe line using shellac etc., complete complying with standard specification.

50 mm dia CPVC Elbow

40 mm dia CPVC Elbow

32 mm dia CPVC. Elbow

25 mm dia CPVC. Elbow

20 mm dia CPVC. Elbow

25 mm dia CPVC. Bend

20 mm dia CPVC. Bend

50 mm dia CPVC Tee

40 mm dia CPVC. Tee

32 mm dia CPVC. Tee

25 mm dia CPVC. Tee

20 mm dia CPVC. Tee

50 mm dia CPVC Nipple

40 mm dia CPVC. Nipple

32 mm dia CPVC. Nipple

25 mm dia CPVC. Nipple

20 mm dia CPVC. Nipple

40mm x 32mm dia CPVC. Reducer Elbow

32mm x 25mm dia CPVC. Reducer Elbow

25mm x 20mm dia CPVC. Reducer Elbow

Supplying and fixing in positon Indian Water Closet (Oriya type) of size 580 x 440mm colour glazed earthern ware of approved quality and brand with "P" or "S" trap conforming to BIS with crushed stone sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete 1:2:5 (One lime, Two crushed stone sand and Five brick jelly) 100mm thick and finishing the top to the required slope and including giving necessary connection to PVC soil pipes (including the cost of 100mm dia PVC pipe for a length of 600mm) by dismantling brick masonry wall / reinforced cement concrete roof / floor slab and making good the dismantled portion to the original condition with leakages etc., complete complying with standard specifications and as directed by the departmental officers. (The water closet should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm "P" or "S" trap connecting with PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws,etc.,including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings such as 15mm brass connections, 15mm GM wheel valve, 15mm brass nipple (2 Nos.), 15mm nylon connection, TW plugs, screws and also giving necessary connection to the PVC pipe including cost of 600mm length of 110mm dia PVC pipe and painting the CI brackets with 2 coats of approved paint over one coat of red oxide primer, dismantling the masonry and re-doing the dismantled masonry to original condition etc. complete complying with standard specifications. (The EWC and flushing tank wiht all accessories should be got approved by the Executive Enginer before use on works)

Supplying and fixing in position best quality and approved make Indian made white / colour glazed earthernware wash hand basin of size 550 x 400mm (with pedestal / without pedestal) with a pair of cast iron brackets, including cost 15mm dia brass CP pillar tap, 32mm dia "B" class GI waste pipe with rubber plug and chain, 15mm dia GM wheel valve, 15mm brass nipple, 15mm dia nylone connection, 32mm dia CP brass waste coupling including fixing of wash basin using CI brackets on to the wall in position with TW plugs and screws, rubber washers, white lead and giving necessary water supply connection and painting the brackets with two coat of painting over a priming coat of anti-corrosive paint including testing for leakages etc., complete complying with standard specification and as directed by the departmental officers. (The wash hand basin and specials should be got approved by the Executive Engineer before use on works).

Supply and fixing in position of best Indian make white / colour glazed earthernware lipped mouth flat back urinal of best quality and approved make of size 430mm x 260mm x 350mm with GI pipe, 32mm dia bell mouth PVC connection and waste pipe, 15mm dia GI pipe of required length, 15mm dia GM wheel valve, 15mm dia brass nipple 2 Nos., and fixing the urinals in position with necessary TW plugs, clamps, screws, etc., including dismantling masnory and re-doing the same to the original condition, etc., including painting the pipe with two coats of best quality approved synthetic enamel paint over one coat of red oxide primer and checked without any leakage etc. complete complying with standard specifications and as directed by the departmental officers. (The urinal should be got approved by the Executive Engineer before use on works.)

Supplying and fixing in position 15mm dia brass CP screw down tap / Pillar tap (heavy duty) of approved make conforming to BIS specifications and quality including cost of shellac, thread, etc., complete complying with standard specification and including cutting and threading wherever necessary. (Taps should be got approved by the Executive Engineer before use on the works)

Supplying and fixing best approved best quality Stainles steel Health Facet with Stop coak of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).

Supplying and fixing position CI Nahani Trap / Floor Trap of 100 x 75mm sizes with best stainless steel gratings of approved brand and quality, fixed over a bed of brick jelly lime concrete 1:2:5 (One part of lime, two part of crushed stone sand and five part of 40mm gauge brick jelly) and finished with Cement Mortar 1:3 (One Cement, Three crushed stone sand) including dismantling masonry works wherever found necessary and making good the dismantled portions to the original condition and giving connection to the CI / PVC pipes, etc., complete complying with standard specification. (The Nahani Trap should be got approved by the Executive Engineer before use on works).

Supplying and fixing in position Indian make bevelled edge mirror of approved quality and brand PVC / Fibre Glass framed 600 x 450 x 5.5mm thick mirror, shelf type with hard board backing of approved colour fixed with brass screws, rawl plug, etc., complete complying with standard specification. (The mirror should be got approved by the Executive Engineer before use on woks).

Supplying and fixing approved best quality brass CP towel rail 600mm long and 20mm dia with brackets of same materials including cost of teak wood plugs and CP screws, etc., complete complying with standard specifications. (The tower rail should be got approved by Executive Engineer before use on works).

Supplying and fixing best approved best quality brass CP soap tray of size 150 x 150mm including cost of teak wood plugs, brass screws, etc., complete complying with standard specifications. (The soap tray should be got approved by Executive Engineer before use on works).

Supplying and fixing in position CI manhole covers with CI frames (Heavy duty) of size 60cm x 60cm of best approved quality as per standard specification etc., complete compying with standard specifications.

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). Above Ground Level.

110mm dia PVC soil waste Pipe

75mm dia PVC soil waste Pipe

Supplying and fixing in position best quality PVC soil / waste pipes of various dia having 6 kg / sq.cm. pressure BIS mark and providing leak proof joints using PVC adhesives including fixing to the wall with special PVC / MS clamp, teak wood plugs, brass screws, etc., and making connection to all sanitary fittings, dismantling masonry / RCC works wherever found necessary and making the good dismantled portion to the original condition, including testing for any leakages, etc., complete complying with standard specifications. (The PVC pipes should be got approved by the Executive Engineer before use on works). The rate for earth work excavation,crushed stone sand filling and refilling charges etc. will be measured and paid separately in the cases where the pipe lines are proposed to laid Below Ground Level.

(a) 160mm dia PVC soil waste Pipe

(b) 110mm dia PVC soil waste Pipe

Supplying and fixing in position PVC specials of the following dia and types of approved quality confirming to BIS and providing leak proof joints including fixing to the walls and giving connection to the PVC soil stacks, dismantling the masonry or RCC works and re-doing the dismantled portion to original condition etc., complete complying with standard specifications. (The PVC specials should be got approved by the Executive Engineer before use on works).

75 mm dia PVC Plain bend

75 mm dia PVC Door bend

75 mm dia PVC Y Junction

110 mm dia PVC Plain bend

110 mm dia PVC Door bend

110 mm dia PVC plain Elbow

110 mm dia PVC plain Tee

110 mm dia PVC door Tee

110 mm dia PVC door Y Junction

160 mm dia PVC bend

Supplying and fixing PVC ventilating shaft of 110mm dia (having working pressure 4 kg. / sq.cm) with 3 metre height including cost of PVC cylindrical cowl of best approved quality etc., complete complying with standard specifications and as directed by the departmental officers

Providing Anti-termite treatment to soil adjecent and under building foundation, plinth periphery of the building by application of chemicals of IS 63613 Part I to IV in stages to suit the progress of work consist as per the detailed specification as below. (Measurements taken for the plinth area for the purpose of payment) including breaking of termite mounds, making holes with crow bar, closing the holes after the treatment and including cost of chemicals, labour charges, transport and storing etc., complete and as directed by the departmental officers. (The chemical should be got approved of Executive Engineer before use on work). Stage-1: Spraying anti-termite chemical solution for the foundation before laying concrete, in bottom and sides of foundation. Stage-2: Spraying anti-termite chemical solution to the grade beam level, spraying has to done for the grade beam, brick masonry contact with the back fill earth. Stage-3: Spraying anti-termite chemical solution on the crushed stone sand for the flooring before laying the flooring concrete. This treatment has to be carried out on the crushed stone sand filling by making holes with crow bar to a depth of 60cms and at 60cms intervals on both Stage-4: Spraying anti-termite chemical solution alround building outside by making holes through bar before laying plinth protection and the holes to be closed after the treatment

Supplying and fixing of the post applied self adhesive water proofing membrane to the unconfined retaining wall with water table. self adhesive membrane with HDPE lining or approved equivalent, confirming to the requirements of DIN EN 1849-1 for thickness witha puncture resistance of >200 N as per ASTM E 154, Elongation of 300 %(L) and 200 %(T) as per ASTM D 5147,Tensile strength of>200 N/5 cm (L&T) as per ASTM D 5147, Tear strength of 260 N(L) and 280 N(T) as per ASTM D 4073,has a low temperature flexibility upto -23 degrees as per ASTM D 1970,Can resist upto 5 bar of hydrostatic head as per DIN 1048,passes crack cycling test as per ASTM C 836 at -23 Degrees and has high impact resistance. Treatment to continue along the retaining wall to a minimum height of 600mm above filling level. The prepared surface should be applied with smart care bitumen primer so as to seal all the pores and make the surface ready before application of self adhesive membrane, the consumption shall be 250gms/sqm in single coat. providing and laying of 1.50mm thick self adhesive, cold applied waterproofing membrane comprising of a self adhesive rubberized asphalt with cross laminated HDPE film topped with solar reflectivefilm, the rate is inclusive of cost of all materials, Labour charge for fixing, conveyance of material to site, tools and plants involved in the Work and all other incidental charge etc., complete complying with standard specification and as directed by the departmental officers. (The material quality , brand, colour, shade shouldbe approved by the Executive Engineer before use on work) (Special Work).

DRILLING the 6" (160mm dia) vertical bore well in all soils & hard rock to any reqiored depth as directed by the departmental officer including labour charges, for assembling of cashing pipe inseting in the drillied hole including welding the joints if necessary groting the cashing pipes etc., rig and supporting vehicle from one place to another.

Supply of 160 mm PVC casing pipe of best approved quality etc complete as directed by the departmental officers. The pipe should got approved by the Executive Engineer before use on works

Supplying and fixing the P.V.C. end cap of 160 mm dia at the end of P.V.C. casing pipe etc., complete complying with standard specification.

Supplying and fixing of 5HP 3phase submergible pump of ISI mark

Supply and laying of 3 core 10 sq.mm. armoured aluminium cable for electrical motor, control panel, pressure switch, jockey motor etc., all incidental charges, neccessary caffolding and re-doing the dismantled portions to its original condition wherever found neccessary, etc., complete as per standard specification and as directed by the Departmental Officers. Make: POLYCAB / PARACON / FINOLEX / EQUIVALENT.

Supplying and fixing Nylon rope conforming ISI standard etc., complete as per standard specification and as directed by the Departmental officers.

Supplying and fixing of 2HP 3phase Monoblock Pump of ISI mark

Supplying and fixing of 3 Phase Panel Board including labour charges etc., complete complying with standard specifications and as directed by the departmental officers.

Supplying and fixing of HDPE PIPES FOR SUB-MERSIBLE PUMP IN BORE WELL Class-5 (1 MPa or 10 kg./cm2 pressure) including labour charges etc., complete as per standard specification and as directed by the Departmental officers. (50mm dia)

Manufacturing, supplying and fixing in positon of RCC Jally of 5cm thick in cement concrete 1:2:4 using 20mm machine crushed stone jelly (excluding cost of reinforcement steel) including cost of mould, finishing, curing, lifting, fixing in position etc., complete complying with standard specification and as directed by the departmental officers

Supplying and fixing in position first quality and approved variety of Gun metal Gate Valve / Wheel Valve with BIS make of the following dia including cost of shellac, thread balls, etc., complete complying with standard specifications (for both internal and external water supply arrangements). The valves to be used on work shall be got approved by the Executive Engineer before use on work.

50 mm dia Gun Metal Gate Valve

40 mm dia Gun Metal Gate Valve

32 mm dia Gun Metal Gate Valve

25 mm dia Gun Metal Gate Valve

20 mm dia Gun Metal Gate Valve

Supplying and fixing in position 150 x 100mm "P" or "S" CI gully trap 'A' grade with CI double gratings of size 150 x 150mm and 230 x 230mm at bottom and top respectively with necessary earth work excavation laid over a bed of brick jelly cement concrete 1:3:6 (One cement, Three crushed stone sand and Six broken brick jelly) 150mm thick using 40mm size broken brick jelly including necessary brick work and plastering including dismantling masonry wherever necessary and re-doing the damaged portions to the original conditions using cement concrete 1:3:6 using 20mm stone jelly for fixing the gully trap and giving connections to stoneware sewer line etc., complete complying with standard specifications. [Earth work excavation, brick work, plastering shall be measured and paid separately]. The stoneware gully trap should be got approved by the Executive Engineer before use on works.

Supplying, laying and jointing glazed stoneware pipes of 150mm dia of approved best quality with spigot and socket ends (in reverse direction) in dry condition and laid in loose joints (i.e.) without cement and spun yarn, so that the waste water can be drained to the trenches already available, excluding cost of earth work excavation, cost of re-filling with crushed stone sand / earth, but including laying the pipe in true alignment and gradient and conducting required water supply test for draining with necessary tools and plants, etc., complete complying with standard specifications.

Supplying and fixing in position 150mm dia stoneware tee of approved best quality and provding leak proof joints with cement, spun yarn, etc., including dismantling the brick work and re-doing the dismantled portion to the original condition, etc., complete complying with standard specifications (The stoneware tee shall be got approved by the Executive Engineer before use on work)

Supplying and installing Incinerator for Ladies toilet.etc as directed by the departmental officers. The cost includes cost of material, cost of labour, scaffolding, transportation, conveyance etc., complete complying to standard specification.

Providing expansion joint of 12.5mm wide in between RCC twin columns from top of pedastal to full height including filling the inner space with suitable non-absorbent, flexible and well compressible filler materials of approved quality and brand; finishing the sides of RCC columns with polysulphide sealents for a depth of 7.5mm on either side covering the inner space filled with filler materials as above etc., complete complying with standard specifications

Providing expansion joint 12.5mm width in RCC roof slabs between RCC twin beams using PVC water bar of 150mm wide centre bulb of 4mm to 6mm thickness of approved quality and brand and including filling the inner space with suitable non-absorbent flexible and well compressible filler materials of approved quality and covering the top surface with GI sheet 30cm wide and 1.6mm thick using phill plugs, GI screws, limpet cup washers, bitumen washers, etc., complete complying with standard specifications and as directed

Providing expansion joint in RCC floor slab for 12.5mm width using polysulphide as sealent on the top and bottom for a depth of 7.5mm each and packing the inner space using compressible non-absorbent filler materials including cost of labour for cutting and fixing filler materials and laying polysulphide sealent with necessary spatula etc., complete complying with standard specifications and as directed by the departmental officers

Supplying and erecting pull and push type rolling shutter with ISI make of approved size and section using 18 GI sheet. The shutter shall be painted with one coat of red oxide primer and the rate is inclusive of hood covers, transportation charges etc.,

Supplying and erecting in position of following liters capacity Industrial Model Reverse Osmosis Water-cum-Purifier to deliver Potable Water with World Health Organisation (WHO) Standards with following accessories.(a) MS Skid - 1 No.(c) Feed Pump 0.50 HP – 1 No.(e) Membrane 40 x 40 filmtech (or) equilaents / Osmonic (USA) - 1 No. and Membrane Pressure Vessel 40 x 40 -1 No. & Pressure Gauge - 2 Nos.(f) Flow Meter - 1 No. 20” Filter with Housing - 1 No., Low Pressure Switch - 1 No., Level Switch - 1 No. & Necessary CPVC Pipes and Fittings.The system shall be provide with Two Panel Control System with necessary Stainless Valves and Fittings and Float Control etc. The rate should be inclusive of all civil works, wherever necessary to install the System in position and intact.(a) 50Litres

Reverse Osmosis system : 10 LPH Fully Automatic machine , 10LPH Storage Capacity , Storage Online Model , Normal Mineral Water Dispenser . Mineral Water Plant .(RO) , 10" Sediment filter with housing -1 NO , 10"Pre-Carbon Filter with Housing -1No , 10" Post Carbon Filter with Housing-1No, 1 Micron Membrane Filter -1No, USA Make ,RO System ,5 Stage Water Purifier system , Including Stand with Cover ,Automatic Re Filling Model Name : 10 Litter Per Hour Dolphin RO

Supplying and fixing of GI pipe B CLASS of 50mm dia of approved quality for purlins including cutting, threading, drilling, weilding, etc., The purlins should be given priming coat of Rex Oxide primer of approved quality including labour for erection, transportation, wellding etc., complete complying with standard specification.

Supplying and fixing by drilling holes and not by puching for Roofing with pre painted Galvalume sheet of 0.47mm thick of best approved quality with required size with curved shape and white ridge sheet with necessary bolts and nuts bitumen washers, including cutting the sheet to the required size found necessary during execution etc., Complete complying with standard specifications. [The sheet should be got approved by the Engineer incharge before use on works]

Supply and providing 5000 litres capacity Priming Tank made up of PVC. Make: SINTEX / EQUIVALENT

Supplying and laying of Rubber Moulded Hydraulic Pressed Paver Block 63mm thk. Over a base layer of crushed stone crushed stone sandfilling incl. Cost of materials laying and Labour charges etc.,

Supplying and fixing following Ornamental Burma Teakwood entrance door as per the drawings and designs approved by the departmental officers .The size of the opening is 1.80x2.40m. The outer frame of the door is 150mmx125mm teakwood. The main door shutter opening size is 1.58mx2.35m.The main door should be double leaves and each door shutter fully panelled.The door shutter outer frame of size 150mmx50mm teakwood. The door panells shall be of 50mm thick teakwood planks with ornamental designs approved by the Executive Engineer.The lock rail shall be of 200 x50 mm tk teakwood. All the door frames and shutters shall be given two coats of best approved quality melamine finish. The rate inclusive of cost of best approved quality teakwood, brass hinges, brass tower bolts, brass aldrops, door stoppers, brass screws etc., The cost includes cost of material, labour charges, conveyance charges,fixing charges, designing charges , electricity charges and all other incidental charges, etc. all materials should be got approved by the executive engineer before use on works.

Manufacturing and supplying fixing of teak wood dias of size 3.60x 3.00m of height 0.7m consisting of vertical members made up of 75x75mm teak wood leg of 24 nos and top connected with Teak wood scantling and tie member of scantling of size 50x40mm and Teak wood bottom scantling and intermediate of size 50x40mm and tied with nails and wooden plugs and the top portion is finished with 25mm water proof plywood over which red cusion carpet has been provided. Front side and one side face is covered with 6mm ply.All the exposed teak wood surface should be p[olished with lac polish finish.The cost is inclusive of supplying, fixing of materials, Labour & Carving charges, convenyances and all other incidental charges etc., complete complying with standard specifications. Theteak wood dias shall be got approved by the Executive Engineer before use on works.( Excluding cost of GST)

Manufacturing, supplying and placing in position Plywood Dias of size 2.20x1.80m of height 0.30m supported with two Nos. of horizontal scantling of size 75x50mm across the dias.All the 4 sides and top is covered with 19mm commercial plywood. The Dias is fully covered with red cushion carpet complete complying with standard specification. The cost is inclusive of supplying, fixing of all materials, labour & carving charges, conveyances and all other incidental charges etc. complete complying with standard specification. The ply wood dias shall be got approved by the Executive Engineer before use on works. (Excluding the cost of GST)

Manufacturing and supplying of T.W. Barricade of ornamental type of 1200mm/ Height 1) Vertical members made out of 90mm x 90mm scantlings, 2) Horizontal members are made out of 75mm x 50mm scantlings. 3) vertical ornamental member made out of 55mm x 55mm 4) vertical ornamental members at 150mm interval and covered with red cloth from bottom to top of barricadding All wooden portions with polish finish. The barricade will have a door opening on one sideetc complete complying with standard specification.The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers.

Manufacturing and supplying of T.W. Accused Box with Ornamental Barricade size of 2400mm x 1200mm x 1200mm including door opening and its accessories wih the following specification and sizes are 1) Vertical members made out of 90mm x 90mm scantlings, 2) Horizontal members are made out of 75mm x 50mm scantlings. 3) vertical ornamental member made out of 55mm x 55mm. 4) vertical ornamental members at 130mm interval. 5) Bottom of box 1200mm wide with 18mm thick plywood with laminated. All wooden portions with polish finish. T complete complying with standard specification.The rate excluding of all taxes and includes cost of all materials, labour, transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers.

Manufacturing and supplying of T.W. Witness Box with Barricade of ornamental type of 1200mm Height with the following specification and sizes are 1) Vertical members made out of 90mm x 90mm scantlings, 2) Horizontal members are made out of 75mm x 50mm scantlings. 3) vertical ornamental member made out of 55mm x 55mm 4) vertical ornamental members at 130mm interval. All wooden portions with polish finish. Witness Box 915mm x 915mm x 1200mm. The rate excluding of all taxes and includes cost of all materials, labour, erection, polish transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers.

Manufacturing and supplying of T.W. Long Advocate Table of size 1830mm x 915mm x 760mm with polish and finish etc. The following specification and sizes 1) Front vertical members made out of 50mm x 50mm 2) Horizontal members of Table 50mm x 25mm 3) The intermediate members leg to leg made out of 50mm x 25mm. All wooden portion with polish finish, The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers.

Manufacturing and supplying of T.W, Executive Table (For Judges) of size :3600mm x 900mm x 760mm of 18mm thick Plywood with Laminated top. The following specification and sizes 1) Front vertical members made out of 50mm x 50mm 2) Horizontal members of Table 50mm x 25mm 3) The intermediate members leg to leg made out of 50mm x 25mm. All Three sides were covered with Teakwood plank and the members are finished with an ornamental design and carving works. All Inner portion with polish finish etc., complete complying with standard specification. The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers.

Manufacturing and supplying of T.W. Executive Chair (For Judges) of size 21" x 24" x 54" made of T.W Scantling of size 3" x 2" shaped to design seat and back with plastic cane knitted, And the legs are made of 15 mm dia Carving TW. Then 50mm thick LATEX FOAM covered with cloth will be fixed. All T.W. Portion fitted on steel revolving base, wooden portion with polish finish etc., complete complying with Std specification.The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers.

Manufacturing and supplying of T.W. Assistant Table of size 915mm x 675mm x 760mm with drawer in teak Veneer finish and laminated. Table of the following sizes. 1) Strutting members made out of 55mm x 55mm 2) Top runner with 80mm x 40mm intermediate runner with 55mm x 40mm rest and bottom side runner 65mm x 40mm. 3) Table top provided with 18mm thick plywood with laminated top. The edges of the table is finished with teak wood lipping edges of the table is finished with teak wood lipping which is polished. The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers.

Manufacturing and supply of Teakwood Assistant chair PU (Polyurethane) seat and Knitted back for Staff Teak wood frame 2"x2" for legs,3"x2" for seat and back frame PU polished with natural teakwood finished .The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers.

Manufacturing and supplying of T.W. bench of size 2100mm x 450mm x 450mm of the following sizes 1) Strutting members made out of 55mm x 55mm 2) Top runner with 80mm x 40mm intermediate runner with 55mm x 40mm rest and bottom side runner 65mm x 40mm. 3) Table top of 450mm wide with 18mm thick plywood with laminated. The edges of the table is finished with teak wood lipping which is polished. The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers.

Manufacturing, supplying and placing in position of Teak Wood Lectern for judges of length 680mm breadth 680mm at a height of 150mm for a width of 175mm from rear sides and front sides is tapered to 25mm for a width of 505mm having a slant height of 520mm. A hole of size 25mm dia is provided at the center of rear side of the desk to provide mike. All the sides and tip is finished with 20mm thick teak wood planks.All the exposed teak wood surfaces should be polished with best lac polish finish. The cost is inclusive of materials, labour & carving charges, conveyances and all other incidental charges etc. complete complying with standard specification. The teak wood Lectern shall be got approved by the Executive Engineer before use on works. (Excluding the cost of GST)

Manufacturing, supplying and placing in position of Teak Wood Lectern for Advocates of length 680mm breadth 530mm at a height of 450mm for a width of 130mm from rear sides and front sides is tapered to 25mm for a width of 680mm having a slant height of 400mm. A hole of size 25mm dia is provided at the center of rear side of the desk to provide mike. All the sides and tip is finished with 20mm thick teak wood planks.All the exposed teak wood surfaces should be polished with best lac polish finish. The cost is inclusive of materials, labour & carving charges, conveyances and all other incidental charges etc. complete complying with standard specification. The teak wood Lectern shall be got approved by the Executive Engineer before use on works. (Excluding the cost of GST)

Manufacturing, supplying, placing in position of Amplifier box of size 600 x 400 x 800mm. The box is covered in all sides with 19mm both side pre laminated particle board with three inner shelf . Front side is provided as open able door with 100mm powder coated handle. The cost is inclusive of all materials, labour charges conveyance and all other incidental charges etc. complete complying with standard specification. The amplifier box shall be got approved by the Executive Engineer before use on works. (Excluding the cost of GST)

Manufacture and supply of TW Single side storage rack of size 6' X 1'75" X 3'0 with double rack made with 25mm thick ply and middle separater with 12 thick plywood and all the sides and top are covered with 12 mm thick plywood the front side of the rack provide 5mm thick glass sliding shutter with necessary lock arrangements etc., complete complying with standard specification.The rate excluding of all taxes and includes cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers.

Manufacturing, supplying and fixing in position of Teak Wood Foot Rest of length 400mm breadth 400mm of a height of 150mm in rear side & 100mm in front side. All the sides is covered with 20mm thick teak wood planks with base made up of 19mm commercial plywood and top portion is finished with foam and rexin cover. All the exposed surface should be polished with best lac polish finish. The cost is inclusive of all materials, labour & carving charges, conveyances and all other incidental charges etc. complete complying with standard specification. The foot rest shall be got approved by the Executive Engineer before use on works. (Excluding the cost of GST)

Manufacturing and supplying Executive Table of size 6'0" x 3'0" to a height of 2'6" standardised and customised for District court. The Table top shall be made of 25mm thick exterior grade Both side Pre laminated wood particle board with duck nosing on two sides (ISI & ISO Certified) and 18mm thick exterior grade Both side Pre laminated wood particle board (ISI & ISO Certified) for all other vertical planks. The table comprises 1 No. of Drawer, 1 no of Cupboard with lock & key in one side and 3 nos. of drawers with 3 in 1 lock and key on the other side. All cutting edges are finished with PVC edge banding. The rate includes cost of all materials, fabrication,transports and other incidental charges, including providing in the position as directed by the departmental officers.

Manufacturing and supplying Executive Table of size 5'6" x 2'6" to a height of 2'6" standardised and customised for District court made out of 25mm thick exterior grade both side pre laminated wood particle board (ISI & ISO certified) for the table top and 18mm thick exterior grade both side pre laminated wood particle board (ISI & ISO certified) for all other vertical planks the table includes 1 no of Drawer, 1 no of cupboard with lock & Key in one side and 3 no of drawers with 3 in 1 lock and key on the other side the particle board cutting edges are finished with PVC edge banding. The rate includes cost of all materials, fabrication, transports and other incidental charges, including providing in the position as directed by departmental officers.

Manufacturing and supplying office Table Size of 48" x 24" x30" standardised and customised for Medical college. The frames made of 1" 18 gauge CRCA square tubes, the drawer and box made of 18 gauge CRCA sheet. The top of table shall be provided with 19mm hardwood ply with laminated top. Corner of table shall be rounded up or SS corner clamp to be fixed. ISI grade locks, SS handles and pushes are to be fixed at wherever necessary . The rate includes cost of all materials, fabrication,transports and other incidental charges, including providing in the position as directed by departmental officers.

Supply of steel chair of standardised and customised for District court Madurai with following specifications: The frames are made of 2.54 cm MS square hollow pipes. The seat and backrests are with cushion. The hand rest top should be finished with wood. The backrest is of size 17"x8" and seat is of size 18"x18". They are firmly welded to frames. All joints should be grinded smoothly and without burrs and applying of electro powder coated with the colour as specified by the department officer.The rate inclusive of cost of all materials, welding charges, benting charges, labour charges, electro powder coating, transportation as applicable and supply to worksite.

Fabrication and supplying of plain Steel table of size 33"x21"x32" using 25mm MS square tube frame work of standardised and customised for for District court Madurai.The top of table shall be pre laminated partical board of 18mm thick and rigidly fixed on the MS frame work. 4 Nos of nylon bushes should be fixed at the bottom of legs. All joints should be grinded smoothly and applying of electro powder coated with the colour as specified by the department officer. The rate inclusive of cost of all materials, welding charges, bending charges, labour charges, electro powder coating, transportation as applicable and supply to worksite etc., complete.

Supply of Plain Steel chair of standardised and customised forfor District court Madurai with following specification. The frames are made of 2.54 cm MS round hollow pipes. The seat and backrests are provided with CR sheet of 16g. The backrest is of size 17"x12" and seat is of size 18"x18". They are firmly welded to frames. All joints should be grinded smoothly and without burrs and applying of electro powder coated with the colour as specified by the department officer. The rate inclusive of cost of all materials, welding charges, bending charges, labour charges, electro powder coating, transportation as applicable and supply to worksite.

Manufacturing and supply of Steel Twenty door industrial locker with louver, pad lock arrangements, handle, Name card holder, Size: 60"x 48"x18" standardised and customised for Medical college . Specification for Twenty door industrial locker, Body: 20 gauge CRCA sheets, Door: 18 Gauge CRCA Sheets, Coating: Enamel Spray coat with oven dry after the treatment of primary coat, Lock: ISI Grade Aligarh/equivalent Branded lock and Handle.18 Gauge Heavy frame leg and Necessary PVC floor bushes to be fixed. The rate Inclusive of cost of all materials, painting, power consumption, loading, unloading, transportations to site of work and installations etc., complete as directed by the departmental officers.

Manufacturing and supplying of Steel double side book rack of size 36”X30”X78”, standardised and customised for District court. The frame made of 40x40mm L angle with holes provisions for 6 plates of CRCA 18 Gauge sheets with 70micron powder coated after the treatment of seven tank cleaning process. pushes shall be fixed wherever necessary.5 Plates shall be divided into two parts by 6" height perforated sheets (except top plate). Necessary bolt and nuts shall be provided for fixing plates. Bolter stiffener shall be provided for extra support. The rate includes cost of all materials, fabrication, transports and other incidental charges, including providing in the position and as directed by the departmental officers.

Manufacturing and supplying Wooden computer work station model reading cabin with CPU shelf, keyboard tray and dividers of standardised and customised for for District court Madurai . Specification for computer work station - 25mm Pre laminated particle board, (as per approved shade) for legs and sides, Top to be fixed with screw connecters and metal clamps. Each cubicle, shall be provided to a size of 3' H x 2' W x 2' D. every tables to be fixed with wooden keyboard tray and CPU stand. Floor bushes shall be fixed at wherever necessary. The cost includes cost of materials cost of primer, enamel paint and labour charges for fabrication, cutting, bending, welding, grinding, painting, power consumption for fabrication, loading, unloading and conveyance and supplied at work site etc., complete and as directed by the departmental officers.

Manufacturing and supplying of Journal rack of size 36"x16"x84" to display journals, standardised and customised forfor District court Madurai. The rack shall be made of 18mm thick pre laminated particle board with provision for 15 journals. All opening shall be equally divided and provision shall be given for old journals. Back closing stopper board shall be provided with 6mm thick pre laminated particle board. All doors shall be open and insert type. Bottom bush shall be provided. The rate inclusive of cost of all materials, welding charges, bending charges, labour charges, proper finishing, transportation as applicable and supply to worksite etc., complete as directed by the departmental officers.

Manufacturing and supplying of Single side storage rack of size 72"x18"x39" standardised and customised for District court Madurai. The rack shall be made of 18mm pre laminated particle board with 8 equal compartments. Backside shall be covered with 6mm pre laminated particle board. The rate inclusive of cost of all materials, bending charges, labour charges, proper finishing, transportation as applicable and supply to worksite etc., complete as directed by the departmental officers.

Manufacturing and supplying of steel cup-board / wardrobe of size 3'X7'6"( width 18") standardised and customised The rack shall be made of 1mm thick,18 Gauge CR Sheet for front side, sides, top & bottom and 20 gauge CR sheet for rear side (ISI & ISO Certified) which are to be profile folded at all the edges for all sides of cupboard. The plates for compartments (18" width - 4 Nos) are made with 18 gauge CR sheet. It includes one locker arrangements of size 38"X18", shall be located at middle horizontal rack with locking arrangements. push arrangements and front double leaf shutter arrangements made with the CRCA sheet with 6mm thick toughened glass and stiffened with 60 microns powder coating. The rate Inclusive of cost of necessary ornamental handles, hinges, painting, power consumption, loading, unloading, transportations to site of work and installations etc., complete as directed by the departmental officers.

Manufacturing, supplying and fixing S Type Chair of size 450x500x900 mm. The chair frame made of 1.5" 22 gauge powder coated M.S pipe knitted with nylon for seat and back rest. Countrywood handles shall be provided. Necessary pushes shall be fixed. The rate inclusive of cost of all materials, welding charges, bending charges, labour charges, transportation as applicable and supply to worksite. as directed by the departmental officers.

Manufacturing and supplying executive table of size 8’x3½’ with 4’x1½’ side table with a height of 2'6" made of 18mm thick high quality HD HMR grade boards of standardised and customised forfor District court Madurai. The table top provided with 25mm thick with 2mm edges finishing. All sides of the table made out 18mm thick high quality HDHMR grade boards of imported brands and finished with 2mm edge beadings. The furniture fittings and locking arrangements are “ebco” branded/ equivalent quality materials with exterior finishing. All parts of the tables fitted with lengthy high quality nylon bushes. The cost includes all materials, labour, charges, fixing charges, conveyance charges and all other incidental charges etc., as directed by the departmental officers.

Manufacturing and supplying of Fancy type push back with hydraulic adjustment chair of modular wood size 20" x 19" x 32" with arms. The seat and back rest shall be provided with cushion made of leather foam including arms. The rollers are fixed at bottom base for easy movement. The rate inclusive of cost of all materials, labour charges, transportation, taxes as applicate and supply @ site of work as directed by the departmental officers.

Manufacturing and supply of conference hall "U" shaped (Rectangular) table of overall size 35' x 8' to Height of 2'6" and width of 2' and the inside well space of 4' x 32', made out of 18mm thick exterior grade Both side Pre laminated wood particle board (ISI & ISO Certified) for the top, vertical & horizontal planks. A file tray under the table top and foot rest are provided in the table. The particle board cutting edges are finished with 2mm thick PVC Edge banding etc., complete complying with standard specifications and as directed by the departmental officers. The cost includes cost of the materials, labour including supplying, erecting and fixing in position, conveyance, complete.

Manufacturing and supply of Modular Reception table of size 0.60m x 0.75m with Teak wood 4" x 2" length tie rafter two at bottom and two at top and cross tie rafter etc., Vertical tie rafter 2 Nos spaced at maximum of 8''. The top of the table may be finished with veneer sheet pasted over 18 mm plywood and the vertical and sides are pasted over 12 mm plywood with necessary fevical, nails including foot rest cable holes, mike holes arrangements. The rate inclusive of cost of all materials,fabrication, taxes, transports,other incidental charges, including providing in the position as directed by departmental officers.

Supplying and fixing of airport type stainless steel chair with cold rolled perforated sheet with chrome plated single seater of size 45x60x77cm with hand rest and cushions, standardised and customised for Medical college. The cushions are to be provided for seating & back rest. The rate inclusive of cost of all materials, welding charges, bending charges, labour charges, transportation as applicable and supply to worksite and as directed by the departmental officers.

Manufacturing and supply of Teakwood Teapoy of size 3' X 1.25' X 1.5' with glass top .The cost inclusive of cost of all materials, labour,transports and other incidental charges, including providing in the position to the rooms as directed by departmental officers.

Supplying and fixing fine polished cuddapah slab of following thickness for cup-board arrangements including laying to correct alignment with necessary cement mortar and black powder etc, complete complying with standard specification and as direct.38 / 40mm thick

Providing Cup-board Shutter with frame using termite / water proof plywood of 19mm thick over which laminated sheet of 0.8mm thick fixed inside the shutter and 1mm thick fixed in the outside of the shutter using fevicol along with necessary furniture fittings, such as, hydralic hinges, tower bolt, handles, multi purpose locks etc., as directed by the Departmental Officers. The design pattern, water proof plywood, laminate sheet and other materials should be got approved from the Executive Engineer befoe use on work.

Fabrication and supplying of steel Record racks of size 4 ' 0 " x 1 '6" x 7 ' 00" feet with 5 compartments with 4 nos of vertical legs of 40x40x2 mm M.S slotted angles and shelf sheet with 18 GCR sheet of size 4 '0"'x 1'.6" fold sheet the four sides with 1 no of stiffener plates at bottom necessary slot in the panel holes are made for joints. All the joints are fixed with bolt and nuts arrangements with necessary connection plate. if necessary the bottom of the legs are provided with flat bottom piece for stability racks are painted with two coats of paint over the priming coat as directed by the departmental officers. The rate inclusive cost of all materials taxes , transportation and other incidental charges etc., complete., complying with standard specification.

Fabricating Supplying and fixing in position of Aluminium anodised natural colour matt finish 1/3rd fixed glazing 2/3rd prelaminated board of Aluminium partition of size 2.70 mx 2.10 m.The outer frames Outer frame: 63.50x38x3mm@ 1.72 kg/m,Centre mullions: 63.50x38x3mm@ 1.55 kg/m,Alu. Clips: 17.27x17.15x1.50mm @ 0.175kg/mg/m for intermediate vertical mullion 90cm c/c. Horizontal mullion at 1.00m 2.10m covered with 4 mm thick plain glass with neccessary aluminium clips of size 17.27x17.15 x1.50mm @ 0.176kg/m and with required rubber beading etc., including necessary dismantling holes in RCC column,masonry wherever in necessary with power drills to the extent required and made good the damaged portion in good condition after fixing as directed by the departmental officers. All the aluminium sections should be anodised not less than 15 microns as ISI specification1868/1962 / and should be gotapproved by Executive Engineer before use.

Supplying, fabricating and fixing in position of Aluminium Natural Colour Mat finilsh Fixed Glazing the glass used shall be of 5 mm thickness. The Aluminium Section are to be anodised under electrically controlled condition as per IS 1868/1962 for an anodic film thickness of 15 microns. All the materials should be got approved by got approved by the Executive Engineer before execution of works.

Structural Glazing: Providing and fixing structural glazing fabricated from roll formed sections made of galvanized steel colour coated (Base steel as per IS 513 of ‘D’ quality, galvanized as per IS 277 with Zinc of 120 grams / sqm.) with total coated thickness of 0.72mm. The glass holding section made of 304 grade SS of 0.6mm thick. Galvanized steel sections are to be used as stiffeners inside the colour coated steel / powder coated sections as per the design requirement. Design calculations are made to suit wind pressures as given in IS 875. Paint specifications: Primer coat with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with alkyd backer of 5-7 microns or powder coated with pure polyester powder upto 50-60 microns thick. Dimensions: The section should be of 37 x 53mm for frame vertical, 37 x 53mm for frame horizontal section and section for reinforcement should be of 31 x 55mm. glass holding section should be of 37 x 37mm for top and bottom grids in between should be of 37 x 18mm.

Providing and fixing of Aluminium Composite Panel (ACP) 4 sided having 50 x 25 x 1.50mm frame work vertical and horizontals out of specially designed extruded sections withstand wind pressure of 180 Kg/sq.m and fabricated fixed at all level elevation and heights. The extruded section cutting and fixing required space extruded section shall be of 6063 and alloy of BSH 9 confirming T is – 63400 rate shall included to fix the main frame with necessary clamps, fasteners, bolt nuts etc. The main frame of extruded section shall be of 22843 & 22739 (H9) grade conforming to BS 4174 (or) IS 8147. Rate shall included 4mm thick ACP sheet (0.25 + 3.5 + 0.25) alstrong or equivalent fixing with spacer tape and the ACP sheet bounded with special type structural sealant of dow corning 789 or equivalent in dust free conditions the gaps between ACP sheet to be filed with whether sealant and backer rod or 12mm foam sheet to ensure water and air tightness in all complete complying with standard specification as directed by the departmental officer

Supplying, fabricating and fixing in position UPVC along with SS mesh with shutter arrangements to drain the water extruded UPVC section of the sizes 50mmx39mm, wire diameter 0.27 kg/m with necessary accessories such as best quality runner , lock, including cost of all materials, labour power consumption required for fabrication, drilling holes in necessary wall where ever necessary with power drills and made same to original condition after fixing.

Fxing of Screen Rod with Power coated brackets, at the two edges for every window door open including loading, unloading charges, labour charges, and all other incidential charges etc., complete.

Providing the Curtain cloth with new best colour and quality of heavy Jacquard curtain cloth including the cost of french guda cloth for top portion including stritching charges etc., Complete.

Cement Concrete 1:2:4 (One Cement, Two crushed stone sand and Four hard broken stone jelly) using 20 mm gauge hard broken granite stone jelly for all RCC items of works excluding cost of reinforcement grill and fabricating charges, centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary and bearing surfaces of walls, beams etc. shall be finished smooth with Cement Mortar 1:3 (One Cement and Three crushed stone sand) and kraft paper laid over it without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers

Providing granular sub-base - III Plant mix by close graded Material, mixing in a mechanical mix plant at OMC, carriage of mixed Material to work site, spreading in uniform layers with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per clause 401

Providing and laying, spreading and compacting graded stone aggregates to Wet Mix Macadam 250 mm thick specification including premixing the materials with water at OMC in mechnanical mix plant carriage of mixed material by tipper to site laying in uniform layers with pavers in Sub Base/ Base course on well prepared surface and compacting with vibratory roller to acheive the desired density including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per clause 406 of MORTH Rev-5

Providing and laying Prime Coat over WBM/WMM surface using 7Kg of Bitumen Emulsion (SS1) per 10 sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 502 of MORTH Rev-5

Providing and laying Tack Coat over WBM/WMM surface (treated with primer) using 2.50Kg of Bitumen Emulsion (RS1) per 10 sqm for preparatory to another bituminous construction over it including cost of material, labour charges, rentals for machinery, fuel and all other incidental charges etc., complete as per Clause 503 of MORTH Rev-5

Providing and laying 50mm consolidated thick bituminous macadam using 0.20 cum fo 26.50-13.20mm, 0.43 cum of 13.20-2.36mm and 0.08 cum of 2.36mm & below size IRC metal with 37 Kgs of VG30/ VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 50mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, Paver Finisher / 9m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 504 of MORTH Rev-5

Providing and laying Bituminous Concrete to 40 mm thick using 0.13 cum of 19.00-9.50mm, 0.17 cum of 9.50-2.36mm and 0.26 cum of 2.36 and below with 50.30 kgs of VG30/ VG40 bitumen for premixing per 10sqm including cost and conveyance of all materials to CMP site, heating the bitumen and aggregate to required temperature and mixing them in required temperature in central hot mix plant 20-30 ton capacity, conveying the mix by tipper trucks to paver site, spreading the mix to uniform thickness of 40mm with mechanical paver to the specified grades and cross sections and consolidated by 8-10 tonne Vibratory / Pneumatic Roller to the required density etc., including labour for attending to paver to site etc., including hire charges and fuel charges for 20-30 t CMP with bitumen boiler, tipper trucks, Paver Finisher / 9m paver finisher, Vibratory / Pneumatic roller and all other tools and plant required, including fuel and all other incidental charges etc., complete as per specification using CMP as per clause 507 of MORTH Rev-5

Supplying, spreading and mixing red earth, crushed stone sand and farm yard manure mixer for the depth of not less than 10cm with required base of chemical for control of pest and disease. For pest control neem cake and carbo fureden shall be used. Fertilizers for root regulator like DAP, Urea and superphosphate shall be used. The cost includes mix cost of red earth,crushed stone sand with fertilizers and labour charges etc., complete as directed by the Departmental Officers

Making of lawn with korean grass truffing including forking the ground top, dressing with sludge manure of fertilizers, mixing with the same with forked soil, watering, weeding and maintenance for a period of 90 days or more from the actual date of completion of planting work till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth if need etc complete as directed by the Departmental Officers

Supplying and planting of trees, plants for providing landscape to the campus from approved suppliers. The rate is inclusive of cost of all plants, equipments, labour for planting, loading and unloading, removal of debris at site, watering, etc., until handing over of landsacping.

Supplying and planting Arica Palms as directed by the departmental officers including digging holes in earth, refilling the same with manure,watering, dressing and removal of rubbish and surplus earth if any with all lead and lift. The cost includes maintenance of plant for a period of 30 days from the date of planting work etc., complete as directed by the Departmental Officers.

Supplying and planting Fox Tail Palms as directed by the departmental officers including digging holes in earth, refilling the same with manure,watering, dressing and removal of rubbish and surplus earth if any with all lead and lift. The cost includes maintenance of plant for a period of 30 days from the date of planting work etc., complete as directed by the Departmental Officers.

Supplying and planting Special Plants as directed by the departmental officers including digging holes in earth, refilling the same with manure,watering, dressing and removal of rubbish and surplus earth if any with all lead and lift. The cost includes maintenance of plant for a period of 30 days from the date of planting work etc., complete as directed by the Departmental Officers.

Supplying and planting foliage /flowering shrubs as directed by the departmental officers including digging holes in earth, refilling the same with manure,watering, dressing and removal of rubbish and surplus earth if any with all lead and lift. The cost includes maintenance of plant for a period of 30 days from the date of planting work etc., complete as directed by the Departmental Officers.

Supplying and planting hedge plants as directed by the departmental officers including digging holes in earth, refilling the same with manure,watering, dressing and removal of rubbish and surplus earth if any with all lead and lift. The cost includes maintenance of plant for a period of 30 days from the date of planting work etc., complete as directed by the Departmental Officers.

Supplying and planting flowering trees as directed by the departmental officers including digging holes in earth, refilling the same with manure,watering, dressing and removal of rubbish and surplus earth if any with all lead and lift. The cost includes maintenance of plant for a period of 30 days from the date of planting work etc., complete as directed by the Departmental Officers.

Supply and fixing of Fire fighting application oblique type Stainless Steel Hydrant Valve of size 63mm – dia with oblique type instantaneous coupling with rotating wheel to open and close the valve including MS flange of table “E”, bolts & nuts with washer as per IS 5290 at ring main around the building and wet riser inside the building including conveyance, all incidental charges, necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. (Make; OMEX/KARTER/LIFE GUARD/SAFE GUARD/EQUIVALENT.

Supply, Installation of Fire fighting application 180 degree swinging type, hose reel drum with 20 mm dia braided thermoplastic hose of 30 meters long so as to extent to necessary distance by self rolling spindle wheel including necessary 20mm dia ball valve & open & close spray nozzle, warm clip, etc., as per the standard pattern of any reputed make at every floor nearer to hydrant valve, including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.

Supply, and fixing in position of Fire fighting application Hose of 63mm dia of 15mts length binded by copper wire with 63mm dia Stainless Steel male and female instantaneous fire fighting special coupling as per IS 901 as directed by the department officers Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.

Supply, and fixing in position of Fire fighting application 63mm dia Stainless Steel short length Branch Pipe with hexagonal type spray nozzle of 15mm (or) 20mm jet bore. Near every hydrant points including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers .(MAKE:OMEX/KARTAR/LIFEGUARD/SAFE GUARD/EQUIVALENT.

Supply and Fire fighting application M.S. Hose Box to keep two numbers of Hoses and one number of branch pipes with nozzle. having proper glass window type double door with universe open key, painted inside white and outside PO red. Near every hydrant point including conveyance, all incidental charges, necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. (Make: OMEX/KARTAR/LIFE GUARD/ SAFE GUARD/ EQUIVALENT.

Supply, erection, testing and commissioning of MS ‘C’ Class Heavy duty pipe as per IS 1239,to withstand a developing pressure of 10kg/sq.cm including necessary fittings like MS flange of table ‘E ‘ Elbows, reducers, gaskets, both, nuts with washers & Joints as per standard method of arc welding .Including one coat metal primer and two P.O RED painting including conveyance ,all incidental charges ,necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. Make; JINDAL/EQUIVALENT.

200 mm dia

150 mm dia

100 mm dia

80 mm dia

50 mm dia

25 mm dia

Wrapping and coating anti-corrosive treatment for underground MS pipe having one coat of anti-corrosive metal primer ,one layer of Asphalt Tar tape wound over the M.SPipe as per standard methods as per standard specification as directed by the departmental officers

150 mm dia

Supply, erection, testing and commissioning of following sizes heavy duty foot valve including all accessories such as MS flange of table ‘E’ gaskets, bolts &nuts, etc., installed at end of 150/200 mm dia suction pipeline at sump including conveyance ,all incidental charges ,necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. Make :NORMEX/KARTAR

200 mm dia

100 mm dia

Supply ,erection, testing and commissioning of Cast iron body and bronze internal non-rising spindle sluice valve of sizes at required places to control the flow of water including necessary MS flange of table ‘E’ gaskets , bolts& nuts including conveyance all incidental charges,necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.Make:NORMEX/KARTAR

150 mm dia

100 mm dia

Supply, erection, testing and commissioning of Cast iron body and Gun metal or stainless steel internal Non-return valve of following sizes to control one way flow of water to be installed pump room at delivery line and near overhead, tank at terrace leve l near to jockey pump and motor including necessary MS flange of table ‘E’, gaskets, bolts & nuts, etc. as per IS 5312. including conveyance, all incidental charges, necessary scaffolding and re-doing dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.

150 mm dia

100 mm dia

Supply, erection, testing and commissioning of Gun metal Gate valve of size 50mm dia including necessary MS flange of table ‘E’ gaskets, blots & nuts, etc. installed at pump house delivery line for the purpose of priming water to suction line including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. Make:LEADER/EQUIVALENT

50 mm dia

Supply, erection, testing and commissioning of Gun metal non-return valve of size 50mm dia including necessary MS flange of table ‘E’ gaskets, bolts & nuts, etc., installed at pump house delivery line for the purpose of priming to suction line so that to control one way including conveying, fixing and incidental charges etc complete as per standard specification and as directed by the departmental officers, Make: LEADER/ EQUIVALENT

50 mm dia ( Pump room)

Supply and providing 1000 Litres capacity priming tank made up of PVC Make: SINTEX/EQUIVALENT

priming tank mounted with the supporting arrangement fabricated using MS angle for the height of 3.00 mtrs from the floor level, inlet, outlet, and drain arrangements inside the fire fighting pump room as directed by the department officers

Supply and laying of following sizes of armoured Aluminium/Copper cables for electrical motor. control Panel, Pressure switch, jockey motor etc. all incidental charges necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc. Make.POLYCAB/PARACON/FINLOEX /EQUIVALENT

3 cores 185sqmm armoured aluminium cable

3 core 10 sqmm armoured copper cable

10core 2.5 sqmm armoured copper cable

2 core 2.5 sqmm armoured copper cable

Earthing arrangements with GI earth plate including charcoal and salt with necessary excavation in all soils and to full depth as may be required and masonry work. Refilling the sides of foundation with excavatedearth as per thestandard specification and as directed by the department officers.

Supply, erection, testing and commissioning of pressure Gauge with 0 to 141 kg range of reputed make with necessary value, milling thread Ms coupling fixed at delivery pipe line in pump house to read the developing pressure including conveyance. All incidental charges, necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc. complete as per standard specification and as directed by the departmental officers. Make: H-GURU/ISIMARK/EQUIVALENT.

Supply, erection, testing and commissioning of suitable Pressure switch of reputed make line indfoss or Donfoss including necessary values, couplings etc. connected with electrical main control panel and setup at proper differential so as to auto start& auto stop the electrical motor. Jokey motor including conveyance. all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary metering protections & indications complete as per standard specification and as directed by the departmental officers. Make: DONFOSS/INFOSS/ISIMARK/EQUIVALENT.

Supplying, installation, testing and commissioning of fire fighting electrical control panel of cubical construction floor mounted type fabricated using CRCA sheet, compartmentalized with hinged lockable door dust, and internal wiring, earth terminals, num bearings , necessary metering protections & indications complete in all respect. Suitable for operation on 451 volt. 3phase,50Hz AC supply with enclosure protection class IP 54 and mounted with the followings

A: Common panel in fire pump House

(i)incomer

a)1 no 600A TP&n sdfu with HRC fuses

b)1 set of 600A, 4 bar Aluminium bus bar,415V,50HZ Ac supply

e)3 nos. phase indication lamp LED type with toggle switches with control fuses

(ii) Outgoing

(b) Jockey pump

(c) Diesel Engine control comprising:

Supply, Installation, Testing and commissioning of Diesel engine driven main Fire Pump suitable for automatic operation and consisting of following complete in all respects as required. (a)1 No. Horizontal split Casing centrifugal type fire pump capable of delivering 2280 LPM against a total head of 70 mtrs so as to ensure a minimum pressure of 3.5 Kg per sq cm at the farthest top most hydrant/ Outlet with pump casing of cast iron to grade FG 200, IS 210 -1978 and parts like Impeller, shaft sleeve, bearing ring etc of non corrosive metal either like Bronze, brass or Gun Metal and shaft stainless steel. b) 68 BHP, 1500 RPM water cooled with radiator, diesel engine conforming to relevant BS & IS standard complete. c)Auto starting mechanism, 12 volts 24 volts electric starting equipment like self Motor, Dynamo, Solenoid switches etc. d)110 ltrs capacity Diesel tank mounted over stand fabricated using 25mmx25mmx6mm size MS angle, providing with level indicator, inlet port, outlet port, drain port and diesel return line port and fuel pre filter, after filter etc. e)exhaust system having flexible metallic muffler, 100mm dia MS heavy pipe extended upto 1m. Outside pump house duly insulated with 50mm thick glass wool with 1.00mm thick aluminium sheet cladding, residential silencer with necessary MS support arrangements from

wall or ceiling as per site condition. f)Dash Board consisting the Instruments like Temperature Gauge, Galvano type DC Ammeter, Lub oil Pressure Gauge, Ignition switch, Emergency Stop and all other protection equipment as per specification, stop solenoid for auto stop in the event of fault with audio indicatio ns, painted with post office red colour etc as required. g)12 V / 24 V, storage battery, maintenance free tape, 180 AH rating.h) M.S fabricated common base plate, coupling guard, foundation bolts etc as required i)Postioning the Diesel Engine driven Fire Pump over cement concret foundation using suitable size Anti Vibration mounting arrangements. All works including conveying, fixing and incidental charges etc complete as per standard specification and as directed by the departmental officers. Make: KIRLOSKAR/ EQUIVALENT

Supply erection testing and commissioning of fire fighting application horizontal centrifugal type pump rated for 2850 LPM at 70 mtrs head with electrical motor of 60 HP of 415V, 3 phase connection, complete with base plate and accessories. (Make : Kriloskar or Equivalent). The rate is inclusive of necessary vibration bed mounting, etc as per standard method as directed by departmental officers.

Supply, erection, testing and commissioning of 180 LPM 70 metres Head Pressurization pump with 10 HP electrical motor of kirloskar make with suitable base frame, Including necessary vibration bad mounting etc., including conveying, fixing and incidental charges etc complete as per standard specification and as directed by the departmental officers. Make: KIRLOSKAR / EQUIVALENT.

Supply, erection, testing and commissioning of fire fighting application monoblock motor pumpset of 900 LPM at 40 metres head to develop 3.5 kg/sq.cm at the heightest and farthest hydrant point to make 30 m water jet at the time of fire fighting emergency cicumstances, coupled with 11 KW / 15 HP rated three phase 414 volts, 50 Hz, 2880 rpm electrical motor the pump with cast ron body, bronze impeller, rope gland packaging, suction size of 80 mm dia. delivery size of 65 mm dia., including the cost of foundaton concrete anti vibration mounting, rain safety hood and etc. complete as directed by the Departmental Officers (Kirloskar make KDS 1555+ or Equivalent)

Supply, erection, testing and commissioning of Fire fighting 4 way fire brigade inlet with necessary Gun metal 63 mm dia non return spring shutter arrangements so that to control one way flow at the time of emergency water supply by fire and rescue service fire engine entry, including conveyance, all incidental charges, necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.

Supply, erection , testing and commissioning of Air release valve of 20mm dia so as to release airlock in 100mm dia MS pipe at top most wet riser, including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers. Make: KARTAR/ EQUIVALENT.

Supply and fixing of stored pressure ABC (Mono Ammonium Phosphate) powder type Fire Extinguisher of 6 kgs capacity as per IS: 15683 with pressure gauge, discharge hose & control nozzle, wallmounting bracket, safety clip etc., including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.

Supply and fixing of Carbon-di-Oxide Gas Type 2 kg. capacity Fire Extinguisher as per New IS15683, complete with control valve, discharge hose with horn, wall mounting bracket, safety clip etc., including conveyance, all incidental charges, neccessary scaffolding and re-doing the dismantled portions to its original condition wherever found neccessary etc., complete as per standard specification and as directed by the Departmental Officers. Make: EXCELLENT / SAFETY FIRST / EQUIVALENT

Supply and kept in position of 9 litres capacity Fire Buckets of 4 Nos. with Bucket Stand as per standard specifications and as directed by the Departmental Officers

100mm Dia

80mm Dia

50mm Dia

Supplying, installing, testing and commissioning of 12 - Zone Conventional Fire Alarm Control panel with 48 hours battery back up for normal operation. The Panel Shall be provided with battery charger etc, and as directed by departmental officers.

Supply, installation, testing and commissioning of Conventional Smoke Detector suitably mounted on ceiling with MS juction box / false ceiling using fixing accessories like screws, plug, clamps, etc., as per standard methods and as directed by the Departmental Officers. (Make: Apollo / Equivalent)

Supplying, installing, testing and commissioning of conventional electronic Hooter with base and as directed by departmental officers.

Supplying, installing, testing and commissioning of Manualcallpoint (break glass type) withback box and as directed by departmental officers.

Supply and laying of following sizes of armoured Aluminium/Copper cables for electrical motor. control Panel, Pressure switch, jockey motor etc. all incidental charges necessary scaffolding and re- doing the dismantled portions to its original condition wherever found necessary etc. Make.POLYCAB/PARACON/FINLOEX/EQUIVALENT

2 CORE 2.5 sqmm armoured copper cable

Supply and fixing nominal bore quartized bulb type sprinkler bulb 68 Deg C fast response pendent type including GI collar for each sprinkler bulb, mounted in MS pipe line using suitable size MS threaded coupling, thread, Shellac etc.,as per standard methods and including conveyance, all incidental charges, necessary scaffolding and re-doing the dismantled portions to its original condition wherever found necessary etc complete as per standard specification and as directed by the departmental officers.(Make: OMEX/KARTAR/SAFE GUARD/EQUIVALENT.

Supply, Installing, testing and commissioning of Stainless Steel Corrugated Flexible Braided Pipe (Hose) for dropping sprinklers below false ceiling. Pipe shall be 16 bar pressure rating and 1500mm long, 25mm dia with union / reducer, collar, clamps, etc. It shall have UL listed and FM approved.

Supplying and installing of approved type Rosette Plates (Recessed Type in Two Pieces) for sprinklers below false ceiling area. The Rosette shall be fabricated by MS plate of 2mm thick and the finish shall be powder coated and colour, as directed by the Departmental Officers.

Fabricating, Supplying and fixng in position of steel sheeted windows ( Two Leaves) with the following specifications. Outer frames of windows made of 'Z' section F7D of size 33 x 25 x 3mm at 1.419 kg/ m and mullion 'J' section (F4B) of size 46x25x3mm at 2.28kg/m and shutter section of made of F7D of 33x25x3mm at 1.419 kg/m as specified in IS 7452/1990. Each openable shutter should not exceed a width of 600mm to enable separate operations and easy maintenance. The panel of the shutters to be covered with 18 gauge cold rolled sheet of superior quality and welded intact with shutter frames. Horizontal stiffeners using 18x5mm MS Flat at 0.70kg/m at 3 Nos. for each shutter and additional diagonal stiffners of the same MS flats at all the four corners of each shutters to the suitable length welded to the shutters, for holding the CR Sheets in position firmly.2 numbers of sturdy hinges and one number of handle-cum-latch of special type made with 18x5mm MS flats are revetted to the shutters at an appropriate height in window. suitable opening is left for its easy operation. a stopper square rod for handle is provided in the mullion section at suitable place to catch the window handle. each window shutter having an adustable stay made out of 18 x 5mm at 0.70 kg/ m MS flat of lenght 320mm with three adjustable position. A matching peg is provided in the outer frame of the window at suitable place. 4 Nos. of hold fasts of 120mm length spliced at the ends are welded to the outer frame of the window by using MS flat of 18x5mm at 0.70kg/m, welded to the shutter at two

place equivalent from each from top and bottom of the shutter.An MS square bar of 12mm size is welded to the inner face of the window at an equal interval not exceeding 100mm edge between them. All members are painted with one coat of anti-corrosive red oxide primer as directed by the departmental officers.All sections should be in confirmed with IS 7452/1990.The cost includes cost of all materials, labour charges and other incidental charges, etc., complete

Design Fabrication, Supply and erection of bar screen made of MS 10mm square bars to suit the channel. Inner size of channel 1000mm , wide 900mm liquid depth and 1200mm length. The MS 10mm square bars should be properly epoxy coated to avoid the rusting of bars. The spacing between the square bar is 5mm, so that the particles above 5mm will be retained in the entry channel and will be cleared by hand rac manually. The bar screen should be kept at an inclination of 60o. The bar screen is fixed at site, inside the channel with a groove like arrangements, so that bar screen could be removed for maintenance purpose. The cost includes cost of MS bars, fabrication charges, Epoxy painting charges and fixing at site transport charges to site., etc., complete.

Design Supply and erection of Tube Settler feed pump with motor with the capacity of 6m3 /hr as per the design. The type of the pump is submersible sewage disposer 1 H.P , Non clog. The pump make is kirloskar/CRI/equivalent, The capacity of the motor is 1.0 HP. The type of the motor is TEFC, IP55, CLSS-B insulation, suitable for 3 phase supply, 440V, 50HZ .Motor make is Kirloskar/CRI/ Equivalent. Necessary base frame, foundation bolts nuts are provided to fix the coupled pump set above the foundation bed. The cost includes the pump, motor, Stand by pump and motor, base frame, foundation bolts, labour charges, erection charges, transport charges etc., complete.

Design Supply and erection of Coagulant dosing pump with the capacity of 0-6 liters per hour @ 4 kg/cm2, with 0.16 HP. The material of construction of the dosing pump is polypropene. The pump is fitted Base frame necessary bolts and nut . The capacity of the tank 200 liters with HDFE. The pump is fitted with a suction and delivery line. Necessary foot valve, level indicator is provided with the pump. Including the suitable Agitator for dosing pump The cost includes the cost of the pump, tank, foot valves, delivery and suction tubes of standard length, Agitator, labour charges, transport charges, erection charges etc., complete.

Design Supply and erection of Flocculent dosing pump with the capacity of 0-50 liters per hour @ 4 kg/cm2, with 0.16 HP . The material of construction of the dosing pump is polypropene. The pump is fitted Base frame necessary bolts and nut . The capacity of the tank 200 liters in HDPE. The pump is fitted with a suction and delivery line. Necessary foot valve, level indicator is provided with the pump. Including the suitable Agitator for dosing pump The cost includes the cost of the pump, tank, foot valves, delivery and suction tubes of standard length, Agitator, labour charges, transport charges, erection charges etc., complete.

Design Supply and erection of air blowers Ring Blower with electrical Motor, 16 m3/hr, 1 HP motor . Air blower with motor are provided for one number for operational and one number for standby. The Air blower make is of Raico/Equivalent to suit the design requirements. The Air blower with motor is fixed in a base frame. Necessary foundation bolts, nuts are provided to fix the total coupled assembly of Air blower and motor in the concrete bed. The cost includes the cost of Air blower, base frame , diffusers, foundation bolts, erection charges, transport charges, labour charges., etc., complete.

Design, Fabrication, supply, erection of tube settler media with PVC 1000mm depth 1.1mm thickness in hexagonal chevron shaped fixed with 60 degree slope in tube settler tank including the cost of tube settler media, erection charges , transport charges, labour charges.etc., complete

Design Supply and erection of crushed stone sand Filter feed pump with motor with the capacity of 5 m3 as per the design. The type of the pump is horizontal, Centrifugal, flexible coupling drive arrangement. The pump make is kirloskar/CRI/equivalent, The capacity of the motor is 2 HP. The motor type suitable for 3 phase supply,440v, 50hz . Motor make is Kirloskar/CRI/Equivalent. Necessary base frame, foundation bolts nuts are provided to fix the coupled pump set above the foundation bed. The cost includes the pump, motor, Stand by pump and motor, base frame, Motor Guards, foundation bolts, labour charges, erection charges, transport charges etc., complete.

Design Supply and erection of Oxidant dosing pump with the capacity of 0-6 liters per hour @ 4 kg/cm2, with 0.16 HP . The material of construction of the dosing pump is polypropene. The pump is fitted Base frame necessary bolts and nut . The capacity of the tank 60 liters in HDPE . The pump is fitted with a suction and delivery line. Necessary foot valve, level indicator is provided with the pump. Including the suitable Agitator for dosing pump The cost includes the cost of the pump, tank, foot valves, delivery and suction tubes of standard length, Agitator, labour charges, transport charges, erection charges etc., complete.

Design Supply, fabrication and erection of Multi graded crushed stone sand filter unit with 610mm dia and 1828 mm height. Multi graded crushed stone sand filter is a vertical, cylindrical vessel made out of FRP The inlet pipe inside the vessel is designed to have a bell mouth arrangements for liquid/water distribution, so that the filter media is in position & will not get disturbed. The bottom collection system is provided with header and lateral pipe arrangements with necessary holes. The filtered water is collected thro this header lateral pipes, will flow out to outlet pipes and vice versa. The filter media consists of Multi graded crushed stone sand filled over & under bed media of pebbles and gravels. The size and height of the filter media is as per the design and standards.The joints are properly vessel (Multi graded crushed stone sand Filter ) is supported by FRP legs, thereby fixing the vessel with foundation bolts properly in the concrete foundation bed. The cost includes the cost of materials bolts, nuts and washers, filter media, foundation bolts fabrication charges, welding charges, erection charges, transport charges and painting etc., complete.

Design Fabrication, Supply and erection of Bag filter with 20 micron with 5 m3/hour with Polypropylene Gadridges with 5 1/2 " dia 20" length. The cost includes cost of bag filter, stand , fabrication charges, and fixing at site transport charges to site., etc., complete.

Design Supply, fabrication and erection of Eco Ozotex with Ozone Generator includes the ozone recirculation pump in 4 m3 /hour. The type of the pump is horizontal, Centrifugal, Non clog, self priming flexible coupling drive arrangement. The pump make is kirloskar/CRI/equivalent, The capacity of the motor is 1 HP. The type of the motor is TEFC, IP55, CLSS-F insulation, suitable for 3 phase supply, 440V, 50HZ . ozone generator with a capacity of 100 gms / hour with oxygen concentrator, including the cost of epoxy coating for ozone reactor tank, water ozone mixing equipments with level gauge, safty valve with 1 HP motor. The cost includes the ozone generator, oxygen generator, ozone recirculation pump, motor, Stand by pump and motor for ozone recirculation pump, base frame, Motor Guards, foundation bolts, labour charges, erection charges, transport charges etc., complete.

Design Supply, fabrication and erection of Activated Carbon filter unit with 610 mm dia and 1827 mm height. Activated carbon filter is a vertical, cylindrical vessel made out of FRP The inlet pipe inside the vessel is designed to have a bell mouth arrangements for liquid/water distribution, so that the filter media is in position & will not get disturbed. The bottom collection system is provided with header and lateral pipe arrangements with necessary holes. The filtered water is collected thro this header lateral pipes, will flow out to outlet pipes and vice versa. The filter media consists of Activated Carbon filled over & under bed media of Course Silex. The size and height of the filter media is as per the design and standards.The joints are properly vessel (Multi graded crushed stone sand Filter ) is supported by FRP legs, thereby fixing the vessel with foundation bolts properly in the concrete foundation bed. The cost includes the cost of materials bolts, nuts and washers, filter media, foundation bolts fabrication charges, welding charges, erection charges, transport charges and painting etc., complete.

Design Supply and erection of Back wash pump with motor with the capacity of 5 m3 /hr , head of 3m as per the design. The type of the pump is horizontal, Centrifugal, Non clog, self priming flexible coupling drive arrangement. The pump make is kirloskar/CRI/equivalent, The capacity of the motor is 3 HP. The type of the motor is TEFC, IP55, CLSS-F insulation, suitable for 3 phase supply, 440V, 50HZ . Motor make is Kirloskar/CRI/Equivalent. Necessary base frame, foundation bolts nuts are provided to fix the coupled pump set above the foundation bed. The cost includes the pump, motor, Stand by pump and motor, base frame, Motor Guards, foundation bolts, labour charges, erection charges, transport charges etc., complete.

Design Supply and erection of Treated tank recirculation pump of capacity 15 m3/hour @ as per the design. The Treated tank recirculation pump is of horizontal, centrifugal, non clog self priming type . The pump make is Kirloskar/CRI/equivalent to suit the above said flow rate and head. The pump is coupled with motor by flexible coupling drive arrangements. The purpose of the pump is to recirculation for treated tank . The type of the motor is TEFC, IP55, CLSS-F insulation, suitable for 3 phase supply, 440V, 50HZ,. The capacity of the motor is 1 HP. The motor make is Kirloskar/CRI/ Equivalent. The cost includes cost of pump, motor, base frame, Motor Guards, foundation bolts, labour charges for erection, transport charges etc., complete.

Design Supply, Fabrication and erection of piping for sewage treatment plant of capacity 100 m3 The piping work consists of 1) Suction lines from Equalization tank, delivery lines to Tube settler thro' raw sewage transfer pumps. 2)Pipe lines for Blowers to Equalization tank Both MS and PVC pipes with necessary valves, pressure gauges are used as per the design and suit the flow rate. 3)Pipelines from Clarifier tank Bag filter and Multigraded crushed stone sand filter 4)Pipe line from multigraded crushed stone sand filter to Eco Ozotex reactor and Eco Ozotex reactor to Activated Carbon Filter 5) Pipe line from Backwash pump to Mutigraded filter and Activated Carbon filter 6) Necessary pipe lines , valves, pressure Gauge for filters, flow meters for tube settler feed, crushed stone sand filter , Activated Carbon filter, float level switch The total piping network as given above, is within the sewage treatment units. The cost includes the cost of pipes (MS, UPVC and 1" dia to 3"dia), Specials, valves, pressure gauges, flow meters, pipe fittings, fabrication charges, labour charges, transportation charges etc, complete.

Design, Fabrication, supply, erection of electrical panel board with necessary starters, main switches, voltmeter, ammeter, and electrical cables of required sizes from pumps to panel board as per design. The size of panel board is approximately 3 feet x 3 1/2 feet, fabricated with MS sheets and powder coat. Necessary provisions are given in the panel board for bus bars, main switch , starters, switches, voltmeter ammeter as per the design to suit sewage Treatment plant motors. The cables are run from panel board to the all pumps and other electrical accessories such as level switches dosing pumps etc complete,. The cable sizes are as per the design and suitable for electrical motors fixed in the Sewage treatment Plant. No lighting points are considered. The cost includes the cost of panel board, starters, switches, voltmeter, Ammeter, main switch, cables for motors, labour charges etc., complete.

Design Supply and erection of centrifugal desludger pump with motor with the capacity of 100 m3 , as per the design. The pump make is kirloskar/CRI/equivalent, The capacity of the motor is 1 HP. The type of the motor is TEFC, IP55, CLSS-F insulation, suitable for 3 phase supply, 440V, 50HZ, 300mm Basket dia. Motor make is Kirloskar/CRI/Equivalent. Necessary base frame, foundation bolts nuts are provided to fix the coupled pump set above the foundation bed. The cost includes the pump, motor, , base frame,, foundation bolts, labour charges, erection charges, transport charges etc., complete.

Supplying and fixing of Acryllic Plastic name plate 3mm thick with Vinyl printing letters of all fonts and sizes etc., complete as per the direction of the departmental officers

Supplying and Fixing of Aluminium Dye Cast Letters of approved size and colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes

Tamil Aluminium Dye Cast Letters 25 cm size

English Aluminium Dye Cast Letters 9'' size

Supplying and fixing of weld mesh fencing of approved quatity etc.,

Supplying and fixing of GI pipe B CLASS of 65mm dia of approved quality etc.,

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC Cu. conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall with GI Flush mounting box, Plastic combined cover plate and 6A one way modular type (one module) switch with light/fan marking and making good of the concealed portion with suitable colour for PVC Light/fan point. (The GI flush mounting box, cover plate and switch should be of Legrand / Hager/ Crabtree/ Equilvalent) (5pt/coil)

Wiring with 2x1.5sqmm (22/0.3) PVC insulated SC Cu. conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with PVC accessories in flush with wall GI Flush mounting box ,Plastic combined cover plate and 6A one way modular type (one module) switch with light/fan marking and making good of the concealed portion with suitable colour for PVC Light/fan point. (The GI flush mounting box,cover plate and switch should be of Legrand/ Hager/ crabtree/ Equilvalent) (6pt/coil)

Supply and fixing of single box type 4'-20 W LED fitting (Philips / Havells / Eq) with CRCA body complete with TW round blocks on wall or ceiling with 20 W LED tube with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of square type recessed 1' x 1' 18W LED luminaire (Philips/ Havells /Eq) which provides soft-light and glare free fitting on false ceiling with PVC unsheathed Copper leads from terminals to the fitting.

Supply and fixing of 9W LED lamp (Crompton / Bajaj make) in existing BH point.

Supply and fixing of single box type 4'-20 W LED fitting (Philips / Havells / Eq) with CRCA body complete with conduit pipe suspension from the ceiling with PVC unsheathed Copper leads from terminals to the fitting with 20 W LED tube.

Supply and fixing of square type recessed 2' x 2' 36W LED luminaire (Philips / Havells / Eq) on false ceiling with steel chain and PVC unsheathead copper leads from terminals to the fitting.

Supply and fixing of WT bulk head fitting (Havells/Philips / Bajaj / Crompton or equivalent) suitable for 9W LED lamp with lamp.

Supply and fixing of 48 W LED street light fitting (Higher End Philips / Havells /Equivalent) with Pressure die cast aluminium housing with IP65 protection with suitable diameter GI pipe (Class 'B') and GI Bend complete on the post / wall with PVC unsheathed Copper leads MS clamps and aluminium painting.

Supply and fixing of 11W Helios LED mirror light (Luker make LMR9) on Wall with PVC Unsheathed Copper Leads from terminals to the Fitting

Supply and fixing of 1200 mm (48”) Crompton high speed AC ceiling fan complete with 2 module stepped electronic 100 W regulators with 300 mm down rod on the existing clamp.

Supply and fixing of 300 mm (12") sweep (Light duty) AC exhaust fan complete without provision of holes in the wall

Supply and fixing of louvers shutters arrangements for 300 mm (12") sweep (light duty) AC exhaust fan

Supply and fixing of 400mm (16 inch) wall mount, Oscillating type fan with aerodynamically designed semi transparent PP three blades for noise free operation with in built Speed regulator with necessary accessories and connections complete. (Havells make Accelero HS/ Crompton High Flo Wave / Usha Maxx Air / Eq.)

Supply and fixing of 3 Nos. 6 Amps 5 pin Universal wall socket 2module with 3Nos 6A. SP. FT control switch (one module) concealed in suitable GI Flush mounting box ,Plastic combined cover plate with connection complete. (The GI flush mounting box,cover plate and switch & sockets should be of Legrand/ Hager/ Crabtree/ Equilvalent). (Computer plug)

Supply and fixing of 1 No 6A 5pin universal wall socket (2 module) and 1 No 6A SP Modular switch (one module) concealed in suitable GI Flush mounting box, Plastic combined cover plate with connection complete. (The GI flush mounting box,cover plate and switch & sockets should be of Legrand/ Hager/ Crabtree/ Equilvalent).

Supply and fixing of 1No 16Amps 3pin socket (3 module) with 1 No 16A. SP FT switch (one module) concealed in suitable GI Flush mounting box ,Plastic combined cover plate with connection complete. (The GI flush mounting box,cover plate and switch & sockets should be of Legrand/ Hager/ Crabtree/ Equilvalent).

Supply and fixing of 20Amps DP Plug and Socket in sheet enclosure with 32A DP MCB in flush with wall with earth connection (For AC Plug )

Supply and fixing of 8 way Single pole and neutral MCB distribution board in sheet steel enclosure double door type with metal door with IP 43 - IK 09 protection with 1 no 32A DP MCB as incoming and 6 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. (The MCB DB and MCB's should be with Legrand / Hager make)

Supply and fixing of 12 way Single pole and neutral MCB distribution board in sheet steel enclosure double door type with metal door with IP 43 - IK 09 protection with 1 no 32A DP MCB as incoming and 10 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. (The MCB DB and MCB's should be with Legrand / Hager make)

Supply and fixing of 7 segment 6 way triple pole neutral MCB distribution board in sheet steel enclosure double door type with metal door with IP 43 - IK 09 protection with 63A 4 pole MCB isolator as incoming and 3Nos 63A DP RCBO with 30mA sensitivity as sub incomer and 18 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. (The MCBDB and MCB's should be with Legrand / Hager make)

Supply and fixing of 7 segment 4 way triple pole neutral MCB distribution board in sheet steel enclosure double door type with metal door with IP 43 - IK 09 protection with 63A 4 pole MCB isolator as incoming and 3Nos 63A DP RCBO with 30mA sensitivity as sub incomer and 12 Nos. 6 A to 32 A SP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. (The MCBDB and MCB's should be with Legrand / Hager make)

Supply and fixing of Vertical type 4 way triple pole neutral MCCB distribution board in sheet steel enclosure double door type with metal door with IP 43 - IK 09 protection with 125A 4 pole MCCB DPX3 160 Thermal magnetic relaeases with 36kA breaking capacity as incoming and 4 Nos. 63 A TP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. (The MCCBDB and MCB's should be with Legrand / Hager make

Supply and fixing of Vertical type 4 way triple pole neutral MCB distribution board in sheet steel enclosure double door type with metal door with IP 43 - IK 09 protection with 100A 4 pole MCB isolator as incoming and 4 Nos. 63 A TP MCB as outgoing in flush with wall and making good of the concealed portion with earth connection. (The MCBDB and MCB's should be with Legrand / Hager make)

Supply and fixing of 32A DP MCB in sheet steel enclosure in flush with wall with earth connection. [The MCB and metal enclosure should be with Legrand / Hager make]

Supply and fixing of 63A FP MCB Isolator in sheet enclosure in flush with wall with earth connection. [The MCB and metal enclosure should be with Legrand / Hager make]

Supply and run of 2 of 1.5 sq.mm (22/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour.

Supply and run of 2 of 2.5sqmm (36/0.3) PVC insulated SC unsheathed Cu. Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour. (For computer set plugs)

Supply and run of 2 of 4sqmm (56/0.3) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14SWG TC wire and making good of the concealed portion with suitable colour. (For 15A, 8waySPN DB'S, AC plugs)

Supply and run of 4 of 4 sq.mm. (56 / 0.3) PVC insulated single core unsheathed copper conductor of 1100V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour.

Supply and run of 4 of 6 sq.mm (84/0.3) PVC insulated SC unsheathed Cu Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour. (For Lighting Seven Segment DB)

Supply and run of 4 of 10 sq.mm (140/0.3) PVC insulated SC unsheathed Cu Conductor of 1100 V grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection by 14 SWG TC wire and making good of the concealed portion with suitable colour. (For power Seven Segment DB)

Supply and run of 4 of 16 sq. mm (101/0.45) PVC insulated SC unsheathed Cu.Conductor of 1100V Grade in suitable PVC rigid pipe concealed in wall and ceiling with continuous earth wire connection of 14 SWG TC wire and making good of the concealed portion with suitable colour. (For AC outdoor)

Supply and laying of 4x10sqmm PVC aluminium armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre and laying the cable though 50mm / 38mm dia HDPE Pipe of and refilling the earth to make good.

Supply and clamping of 4x10 sq.mm PVC aluminium armoured LTUG cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 4 x 10 sqmm PVC aluminium armoured LTUG cable with earth connection

Supply and fixing of Crompton make 40W MAPLE LED decorative post top (LPT0-40-CDL) made of Pressure die cast aluminium housing with IP65 rating on suitable length 32 mm dia GI pipe (Class 'B') with supply and fixing of MS box of size 30mm x 20mm x 10mm and door with lock & key arrangements in existing pillar gate with supply and fixing of 6A DP MCB inside the MS box with PVC unsheathed Copper leads and necessary connection complete.

Supply, Erection of 8m free standing Single Arm Bracket 8 sided Octogonally continuously tapered structured pole with base plate of size 300 x 300 x 12mm as per IS 875 with following spacifications: Bottom pole dia - 130mm Top pole dia - 70mm Thickness of pole - 3mm The pole should be hot dip galvanized conforming to BESN ISO-1461 with thickness of 65 micron. The single arm should be 1500mm length suitable for 70mm top. The pole base plate to be mounted on suitable foundation bolts of 4Nos J type M16x450mm including concreting with construction of Masonary pedestal with suitable door opening on the pole to house 6A SP controling MCB, 4way terminal block etc. with lock and key arrangements and with supply and fixing of 1No 150W LED street light fitting (Make: Philips/Havells/Eq) complete with necessary clamps with necessary cowl arrangements on the above post with PVC unsheathed leads from MCB control to the fitting terminal. This work also includes,

1.Providing centring work for 1.50 Sq.m for for plane/vertical column, bed block etc,

2. Providing necessary concreting & masonry work to erect the pole

3.Providing and laying in position of 0.14Sqm standardised concrete Mix M-20 Grade in accordance with IS 456 using 20mm and down graded hard broken granite stone jelly for for all RCC items of work including fine curing

Supply and fixing of 2 Nos of decorative street light luminaire of K-Lite Make 50W LED Pelican Fort (KL 6791) mounted on 6m decorative garden lighting pole of K-Lite make Pelican Mini Orion Florus (KP 5134) with Double arm decorative bracket with suitable concrete foundation and supply & fixing of 1no of 6A SP MCB (Legrand/ Hager make), 4way terminal block inside the built in Control box with PVC unsheathed copper leads from the terminals to the fitting and necessary connecftion complete.

Supply and fixing of 1 No of Post top luminaire of K-Lite Make 30W LED Ganthal KP 5027 on 3mtr decorative garden lighting pole of K-Lite make Causewaymidi KP 4335 with suitable concrete foundation and supply & fixing of 1no of 6A SP MCB (Legrand/ Hager make), 4way terminal block inside the built in Control box with PVC unsheathed copper leads from the terminals to the fitting and necessary connecftion complete.

Supply and fixing of 3Nos of High Efficiency (3 x 60W) Flood Light Luminaire of K-Lite make Aston KL-4202 on 6mtr Merlin lighting pole of K-Lite make KP 8324 with suitable concrete foundation and supply & fixing of 3nos of 6A SP MCB (Legrand/ Hager make), 4way terminal block inside the built in Control box with PVC unsheathed copper leads from the terminals to the fitting and necessary connecftion complete.

Supply & Fixing of AC / DC 76mm Buzzer /call bell suitable for 230 Volts 50 c/s single phase AC supply on suitable TW round block with 1 Module GI flush mounting box, 1 Module combined plastic cover plate and 1 module Modular type Bell push Switch with indicator complete(The GI flush mounting box,cover plate and switch should be of Legrand/ Hager/ Crabtree/ Equilvalent).

Supply and fixing of Jaquar make 4 x 5W LED LANCIA Gold Spectra type decorative Chandelier of dimensions (400mm dia x 180mm H) suspended from suitable special type clamp, with PVC unsheathed copper leads from terminals to the fitting.

Supply anf fixing of GI Hot dip / powder coated 16SWG cable tray of 150mm width and 50mm height on wall or ceiling with necessary fastereners, bolt nuts and clamps..(Manibhadra / Eq)

Supply and fixing of GI Hot dip / galvanized powder coated preforated 16 SWG cable tray of 300mm width and 50mm height on wall or ceiling with necessary fastereners, bolt nuts and clamps. (Manibhadra / Eq)

6) TP NDIDMT 2 OC + 1EE relay similar like megawin type MC DG 31 master trip replay mega wing MVAJH13 (incoming 1 NO, outgoing 3 Nos ). 7) Breaker on/ off / auto trip/ healthy trip, spring charged indication. 8) Phase indicating lamps R,Y,B 9) Control wiring 10) 800A copper bus bar PVC sleeved and required panel copper 11) control switch TNC (incoming - 1no, outgoing - 3 Nos ) 12) Tril- Circuit healthy push button (incoming 1 NO, outgoing - 3 Nos 13) Common for switch gear, MCB's for AC, DC switch gear, MCB's for AC, DC control heater On/ Off switch with space heater and thermostat single phase socket, cubical illumination lamp, disconnecting type terminal block etc. 14) MS sheet enclosure for indoor installation powder coated with paint shade siemens grey, paint finsih provision through bottom entry to receive incoming and outgoing cable excluding cable glands and cable termination kit. (Make: system control / Megawin / Kirloskar Electric / ABB/ Equivalant)

Supply, erection, testing and commissioning of 11kV / 433V, 1000kVA outdoor type oil immersed Distribution Transformer of Dyn11 vector group, ONAN cooling, double wound copper winding with Level 2 energy efficieny and off load tapping for HV variation in 2.5% steps from -15% to +5% with standard fittings and accessories (as per IS 1180-Part 1 : 2014 with Amendment 1 to 4 ) and fitted with the following: 1) Rating& connection diagram plate 2) Earthing terminal 3)Lifting lugs for whole Transformer 4) Cover lifting lugs 5) Oil level gauge plain with level marking 6) Bottom filter cum drain valve with plug 7) Top filter valve with plug 8) Pocket for thermometer 9) Oil conservator with drain plug 10) Oil filling point with cap on the conservator 11) Air release plug 12)Silicagel breather 13) Monogram plate 14) Explosion vent with diaphragm 15) Transformer oil 16) Under base channle with skids 17) oil temperature indicator with A/T contacts 18) Winding temperature indicator with A/T contacts 19)Marshaling box 20) BI- directional rollers 21) Detachable Radiators 22) ON circuit tap switch

23) conservator shut off valve 24) Neutral CT 25) Maximum Total Losses at 50% Load : 2620W 26) Maximum Loss at 100% Load : 7000W (Make: Kirloskar / Rowsons / Eq)

Supply and providing HT yard link fencing with fixing of 8ft height in RCC concreted pillar of size 0.7f x 0.75ft by excavated the earth with depth of 2ft putting concrete pillar and refilling the earth to make good and fixing of chain link fencing with size of (2"x2")x10SWG galvanised iron wire all around the HT yard with necessary binding wire with ISI earthing. RCC pillar with chain link fencing should be provided for the total area of 48x20ft for seperate the EB yard and consumer supply yard places. HT yard is provided with two gate entries, where one entry for EB side and another entry for consumer side. Each gate is fabricated using 2" GI pipe as outer frame with weldmesh with necessary support. Earthing the fencing by using no.8 SWG copper wire all around the fencing. Earthing of gate by using 25mmx3mm copper flat, filling the yard with 400mm jelly for a height of 0.50feet from ground level to make good.

Supply and erection of Double pole 11kV HT structure of 36 feet 200x100x5.7mm RS joist/MS Tubular pole with 10 feet centre to centre on either side with necessary MS angle cross bracings and mass concreting of poles and providing HT strain discs insulator and suitable size ACSR conductor from supply authority to six pole structure and painting all metal parts complete with supply and erection of the following HT accessories as per the IE & CEIG rules and regulations a) 2Nos, 33 feet length 200 x 100 x 5.7 mm RS joist/MS Tubular poles and base plate 300 x 300 x 6 mm with concreting and copping. b) 1set of 3 Nos. 11 kV Strain disc insulators with metal parts on suitable top channel made up of 4" x 2" x 1/2" to receive the EB supply & to feed HT supply to 2 pole structure. c) 1set of gang operated 11 kV Horizontally/vertically operating pin insulator type 200 A AB switch complete with guide operating handle on suitable double channel and angle iron cross arm with channel size 4" x 2"1/4"complete. d) 1set of 3 Nos. 11 kV lightning arresters mounted on suitable channel iron of size 4"x2"x1/4" complete. e) 1set of 3 Nos 11 kV dropout fuse with operating rod on suitable double channel and angle iron of size 2" x 1/4" complete. f) 2set of 3 Nos 11 kV pin insulators fixed on suitable channel iron frame work complete for supporting to the copper jumper

g) Supply and fixing of required cross bracings of size 21/2" x 21/2" x 1/4" MS angles to keep the structure balance. h) Providing necessary HT connections and jumper connection from TNEB HT structure to the consumer two pole HT structure with ACSR conductor / zero HDBC copper conductor for giving necessary connections and jumpering from 11 kV strain disc insulator to 200 A HT bus, HT bus to 200 A AB switch, AB switch to lightning arrester and to D.O fuse through pin insulator and D.O fuse complete with colour coding. i) Supply and fixing of 11 kV metal danger board 2 Nos j) Painting complete with primary coat of red oxide and then by two coats of approved aluminium paint k) 2Nos of stay arrangements with guy shackle insulators with necessary masonry work if necessary and fencing around EB and consumer structure with blue metal. The above HT accessories are to be fixed on the existing two pole structure.(SR)

Supply and laying of 3C x 300 sq.mm XLPE 11 kV (E) aluminium armoured HTUG cable (Polycab/Eq) in a trench to be excavated at a depth of 1 metre and laying the cable through 300mm dia RCC hume pipe and refilling the earth to make good (From HT metering point to HT 4 panel VCB)

Supply and laying of 3C x 240 sq.mm XLPE 11 kV (E) aluminium armoured HTUG cable (Polycab/Eq) in a trench to be excavated at a depth of 1 metre and laying the cable through 300mm dia RCC hume pipe and refilling the earth to make good. (From HT VCB panel to Transformer 2Nos)

Supply and providing of HT cable outdoor termination for 3 core 240sqmm / 300sqmm11kV (E) screened XLPE cable - EPKT 3372 with necessary connection complete. (Raychem RPG / Eq).

Design, supply erection testing and commissioning of 1600Amps capacity outdoor Copper Bus DUCT of 1 run 100mm x 10 mm for 3 phases 1 run 50mm x 10 mm for neutral and in dust and vermin proof made up of 16 SWG CRCA sheet steel rated for 433 volts, 50 HZ AC supply as per the CEIG guidelines and latest IE rules,S &F of danger board all should be given double earth connection and earth bus must be run around the duct as per IE rules. The bus duct shall be designed for the above current rating and for a maximum tempature rise of 400 over and ambient temperature of 45C All live parts of the bus with suitable SMC support insulators should be with maximum creep age distance as per IE rules . All the copper flat inside the Duct should be provided with heat shrinkable sleeves and lead coating in the termination points. The Bus Duct should be supported the MS channel of size 3 ' x 1/2" x 1/4" . The Bus duct should be painted wiht anti corrosive red oxide and with powder coated epoxy paint as approved by the field engineer. The capacity of the Bus bar size shall be indicated clearly in all the duct outside.(As per Quotation enclosed)

In each cubical switch, live portion of bus bar should be shrouded by 6mm thick hylum sheet separators, and properly earthed by tinned solid copper flat as I.E rules CEIG sepecifications.The earth bus with two runs of 1" x 1/8" tinned copper flat must be run all round the panel to provide double earth connection. The panel should be painted with two high quality enamel paint over one coat of red oxide primer, the cable size, capacity of switch, location etc., should be marked with white paint and 2 Nos. metallic danger board affixed complete with mounting on base channel 3"x1½"x½" iron frame work support complete. (The TPN switches should be L&T / Siemens make only) (DATA HT- 11)

Design, fabrication, testing and commissioning of 1600A cubical panel floor mounting type dust and vermin proof MV panel board of size 24' x 7' x 3.6' made up of 16SWG CRCA sheet steel rated for 433V 50Hz AC supply as per the CEIG guidelines and latest IE rules comprising the following. EB incomer : Incomer 1 : 1600A, 433V, 50kA, 4Pole microprocessor based EDO ACB (Legrand/L&T) with interlock arrangements Incomer 2 : 1600A, 433V, 4Pole 50kA microprocessor based EDO ACB (Legrand/L&T) with interlock arrangements 1. Manual trip push botton-2 nos 2. Mechanical ON/OFF indicator-2Nos 3.UV release suitable for 433V AC -2 Nos 4.NO/NC auxilary contact-2Sets 5. CTs suitable for metering -2 sets 6. LED indicating lamp- 2 sets 7.Digital multi function metering- 2 nos 8.Earth fault relay- 2 Nos 9.Over current relay -2 nos 10.Suitable capacity fuse controls for the systems -2 sets 11. Shunt release for 433VAC - 2 Nos separate mould base for each pole for easy maintenance all revelant protection, accessories as per CEIG IE rules in force with interconnection and terminination and required BUS coupler: 1600A, 433V, 50kA, 4Pole EDO ACB (Legrand/L&T) without protection to IS 13947- 2 / IEC

panel should be painted with two high quality enamel paint over one coat of red oxide primer, the cable size, capacity of switch, location etc., should be marked with white paint and 2 Nos. metallic danger board affixed complete with mounting on base channel 3"x1½"x½" iron frame work support complete. (The TPN switches should be L&T / Siemens make only)

In each cubical switch, live portion of bus bar should be shrouded by 6mm thick hylum sheet separators, and properly earthed by tinned solid copper flat as I.E rules CEIG sepecifications.The earth bus with two runs of 1" x 1/8"tinned copper flat must be run all round the panel to provide double earth connection. The panel should be painted with two high quality enamel paint over one coat of red oxide primer, the cable size, capacity of switch, location etc., should be marked with white paint and 2 Nos. metallic danger board affixed complete with mounting on base channel 3"x1½"x½" iron frame work support complete. (The TPN switches should be L&T / Siemens make only) (DATA HT- 11)

1. 400 A TPN switch disconnector fuse units interior only with HRC fuses double break - 1No 2. 315A TPN switch disconnector fuse units interior only with HRC fuses double break - 1No 3. 200A TPN switch disconnector fuse units interior only with HRC fuses double break - 2Nos. 4. 125A TPN switch disconnector fuse units interior only with HRC fuses double break - 4Nos. 5. 63A TPN switch disconnector fuse units interior only with HRC fuses double break - 2Nos. In each cubical switch, live portion of bus bar should be shrouded by 6mm thick hylum sheet separators, and properly earthed by tinned solid copper flat as I.E rules CEIG sepecifications.The earth bus with two runs of 1" x 1/8"tinned copper flat must be run all round the panel to provide double earth connection. The panel should be painted with two high quality enamel paint over one coat of red oxide primer, the cable size, capacity of switch, location etc., should be marked with white paint and 2 Nos. metallic danger board affixed complete with mounting on base channel 3"x1½"x½" iron frame work support complete. (The TPN switches should be L&T / Siemens make only) (DATA HT- 11)

Supply and fixing of 630A TPN switch disconnector fuse unit in sheet steel enclosure with HRC fuses double break on suitable angle iron frame work with MS cable entry boxes and with earth connection only. (DATA-39)

Supply and fixing of 630A, 500V 4Pole onload type change over switch in sheet steel enclosure on suitable angle iron frame work with earth connection only. (DATA-40)

Supply, Testing and fixing of 800A, 3L+N, Sandwich type Aluminium, Straight feeder (Rising Main), insulation class F (155ºC), Dust and Vermin proof made up of Hot galvanised Sheet Steel of superior grade with provision for mounting external earth strip should be available on Busduct., Aluminium Earthing Plug in points at every floor necessary angle iron supporting of Rising mains.Reference standard: IEC 61439-6. Reference temperature: 40 °C, Protection degree: IP55. Thickness: 1.5 mm, N° of conductors: 4. Painted: RAL 7035 . Halogen Free, The insulation between bars is ensured by a multi sheath made with PET film class F(155°C). (Legrand Make)

Supply, Testing and fixing of 630A, 3L+N, Sandwich type Aluminium, Straight feeder (Rising Main), insulation class F (155ºC), Dust and Vermin proof made up of Hot galvanised Sheet Steel of superior grade with provision for mounting external earth strip should be available on Busduct., Aluminium Earthing Plug in points at every floor necessary angle iron supporting of Rising mains.Reference standard: IEC 61439-6. Reference temperature: 40 °C, Protection degree: IP55. Thickness: 1.5 mm, N° of conductors: 4. Painted: RAL 7035 . Halogen Free, The insulation between bars is ensured by a multi sheath made with PET film class F(155°C). (Legrand Make)

Supply and fixing End Feed Unit and 4P 800A 50kA (Ics=Icu=100%) ACB and flange End Unit (Legrand Make)

Supply and fixing End Feed Unit and 4P 630A 50kA (Ics=Icu=100%) ACB and flange End Unit (Legrand Make)

Supply and fixing of End Cover for the rising main.(Legrand Make)

Supply and fixing of 4P 400A 36kA (Ics=Icu=100%),Tap off Box with MCCB with RotaryHandle,PhaseBarrier (Legrand make)

Supply and fixing of 4P 250A 36kA (Ics=Icu=100%),Tap off Box with MCCB with RotaryHandle,PhaseBarrier

Supply and fixing of Rigid Support, for rising main

Supply and fixing of Spring Hanger, for rising main

Supply and fixing of Wallhanger, for rising main

Supply and laying 3Runs of 3 ½ x 400 sqmm PVC aluminium armoured LTUG cable in the existing cable trench (To Raising Main)

Supply and clamping 3runs of 3 ½ x 400 sq.mm PVC aluminium armoured LTUG cable on post or on wall with MS Clamps. (To Raising Main)

Supply and fixing of brass cable gland for 3 ½ x 400 sq.mm PVC aluminium armoured LTUG cable with earth connection

Supply and providing cable end termination of 3 ½ x 400 sqmm PVC Aluminium armoured LTUG cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete

Supply and laying 3Runs of 3 1/2 x 300 sqmm PVC aluminium armoured LTUG cable in the existing cable trench.(To Rising main & genset panel)

Supply and clamping 3runs of 3 ½ x 300 sq.mm PVC aluminium armoured LTUG cable on post or on wall with MS Clamps. (.(To Rising main & genset panel)

Supply and fixing of brass cable gland for 3 ½ x 300 sq.mm PVC aluminium armoured LTUG cable with earth connection

Supply and providing cable end termination of 3 ½ x300 sqmm PVC Aluminium armoured LTUG cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete

Supply and laying 2Runs of 3 1/2 x 240 sqmm PVC aluminium armoured LTUG cable in the existing cable trench.(To existing bldg and generator)

Supply and clamping 2runs of 3 ½ x 240 sq.mm PVC aluminium armoured LTUG cable on post or on wall with MS Clamps. (To existing bldg and genset)

Supply and fixing of brass cable gland for 3 ½ x 240 sq.mm PVC aluminium armoured LTUG cable with earth connection

Supply and providing cable end termination of 3 ½ x240 sqmm PVC Aluminium armoured LTUG cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete

Supply and laying 2Runs of 3 1/2 x 185 sqmm PVC aluminium armoured LTUG cable in a trench to be excavated at a depth of 0.75m and laying cable through HDPE pipe and refilling the earth to make good.

Supply and clamping 2runs of 3 ½ x 185 sq.mm PVC aluminium armoured LTUG cable on post or on wall with MS Clamps.

Supply and laying of 3 1/2 x 185 sqmm PVC aluminium armoured LTUG cable in a trench to be excavated at a depth of 0.75 meters puting 0.15 meter layer of sand and covering three sides of the cable completely with bricks and sand and refilling the earth to make good. (STP,WTP,power panel)

Supply and clamping of 3 ½ x 185 sq.mm PVC aluminum armoured LTUG cable on post or on wall with MS Clamps. (STP,WTP,power panel)

Supply and fixing of brass cable gland for 3 ½ x 185 sq.mm PVC aluminum armoured LTUG cable with earth connection

Supply and providing cable end termination of 3 ½ x185 sqmm PVC Aluminium armoured LTUG cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete

Supply and clamping of 3 ½ x 150 sq.mm PVC aluminium armoured LTUG cable on post or on wall with MS Clamps. (For 250A floor panel)

Supply and fixing of brass cable gland for 3 ½ x 150 sq.mm PVC aluminium armoured LTUG cable with earth connection

Supply and providing cable end termination of 3 ½ x150 sqmm PVC Aluminium LTUG armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete

Supply and laying of 3 1/2 of 25 sqmm PVC aluminium armoured LTUG cable in a trench to be excavated at a depth of 0.75 metre and laying cable through suitable dia HDPE pipe and refilling the earth to make good.

Supply and clamping of 3 ½ x 25 sq.mm PVC aluminium armoured LTUG cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 3 ½ x 25 sq.mm PVC aluminium armoured LTUG cable with earth connection

Supply and providing cable end termination of 3 ½ x25sqmm PVC Aluminium LTUG armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete

Supply and clamping of 3 ½ x 35 sq.mm PVC aluminium armoured LTUG cable on post or on wall with MS Clamps.

Supply and fixing of brass cable gland for 3 ½ x 35 sq.mm PVC aluminium armoured LTUG cable with earth connection

Supply and providing cable end termination of 3 ½ x35sqmm PVC Aluminium LTUG armoured cable with necessary aluminium cable sockets by crimping etc. with electrical connection complete

Plate Earthing as per IS 3043 : 2018 Copper earth plate 600mmX600mmX3mm thick clamped to bottom portion of 2.7m length 50mm dia GI pipe and buried vertically from the ground level not less than 2.7m with 2Runs of 35 x 6mm copper flat. Cement Concrete with dimension of 1000 x 500 x 600 mm inspection chamber with Cast Iron Cover(Transformer,Genset, VCB, APFC, MV PANEL)

Earthling as per ISI specification with an earth electrode of 2.1m class ‘B’ GI pipe of dia not less than 40mm, with copper earth plate of size 125mm X 50mm X 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. (MOTORS, AC, fIRE FIGHTING, SUB PANEL, RAISING MAINS)

Supply and run of 25mm x 6mm (1” X 1/ 4”) copper flat with necessary clamps / supports on wall / floor / ground for earth connection (For ISI Earth).

Supply and run of 25mm x 3mm (1” X 1/ 8”) copper flat with necessary clamps / supports on wall / floor / ground for earth connection. (For ISI Earth)

Supply and run of 1 of No.8 SWG Cu Conductor in suitable PVC rigid pipe with necessary clamps / supports on wall / floor / ground for earth connection.

Supply, installation, testing, commissioning & handing over of 1No 250kVA diesel generator set with standard control panel 0.8P.F, 3 ph, 415 Volts, 50c/s, 1500 RPM as detailed below. A. Engine: Water cooled diesel engine suitable for generating application (Kirloskar Green / Cummins make) developing shaft output of 124 BHP at 1500 RPM under NTP condition as per BSS 5414-ISO 8528 . The engine shall comprise the following standard scope of supply. 1) Dry type Air cleaner 2) Expansion bellow 3) Radiator, radiator fan and mounting 4) Air to air charge cooler 5) Exhaust gas turbo charger 6) Lube oil cooler and lube oil filter 7) Fuel filter (pre and micro) 8) In-line mono-block fuel injection pump with governor and fuel feed pump 9) Electronic governor 10) 12V battery charging alternator 11) 12V Volt electric starter motor 12) Engine test certificate 13) Residential Muffler 14) Fly wheel with starter ring. Engine instrument panel: Engine control panel consisting of ON/OFF/START/KEY, lube oil pressure gauge, oil temperature gauge, high water temperature gauge and electronic hour meter and RPM indicator. Safety system of Engine:

The engines shall trip for the following conditions with Visual alarm device. 1) Low lubricating oil pressure 2) High water temperature 3) Vee - belt failure and over speed 4) Low battery indication The Engine should be capable of providing 10% over load for one hour for every 11 hours continuous running at full load. B. ALTERNATOR : Alternator capacity of 250kVA (200KW), AC 3phase, 50HZ, 415Volts, 0.8P.F, 4 wire self excited, self regulated, Brushless design to run at 1500 RPM under NTP conditions conforming to BS 5000/IS 13364 (part-II) 1992 (KIRLOSKAR GREEN / STAMFORD make) to be coupled directly to the Diesel engine and test certificate C) STANDARD CONTROL PANEL : The standard control panel (cubical) should be vermin proof and dust proof best quality sheet steel of 16 SWG CRCA MS sheet and floor mounted with suitable hinged glass doors and enamel painted. The panel should be completed with suitable Square/ Rectanguler copper bus bars with internal connections and with necessary cables and other accessories and with tapings for the incoming supply from the alternator and for the outgoing supply to the load and incorporating Suitable MCCB and HRC fuses, Set of control fuses, etc. with following facilities.

D) ACOUSTIC ENCLOSURE: Acoustic enclosure shall be powder coated and fabricated of 16SWG CRCA MS sheet. The silent canopy shall be nut bolt type construction. Critical processes of punching are done on CNC machine to maintain dimensional accuracy of hole within 0.1mm powder coating done after seven-tank surface preparation process of sheet metal. Canopy panel and door shall have inside lining of FIRE-RETARDANT foam / Wool (conforming to BS4735/BIS7888). Four hinged doors shall be provided to canopy. The maximum permissible sound pressure level for new diesel generator (DG) sets shall be 75 dB(A) at 1 metre from the enclosure surface. SURFACE TREATMENT – PAINTING : The enclosure shall be suitably treated for degreasing, de-rusting and phospating. The canopies are passed through seven-tank treatment thoroughly. ADDITIONAL FEATURES OF CANOPIES : Canopy fabricated on CNC machines with dimensional accuracy of 0.1mm so as to increase its durability. Special designed supporting rips/structures are used in canopies so as to give sturdiness and to reduce the vibrations of the DG sets if any. WORLD CLASS COOLING PACKAGE: Canopies shall have cooling package for which it can perform at 45 deg c/ambient temperature. No grounding required on the ground, only a level surface capable of withstanding the DG weight. Lifting hooks shall be provided for the acoustic enclosure, which should be unloaded independently of the DG set. The Gen set frame shall also be provided with hooks for unloading.

Temperature rise inside the canopy: Canopies shall be designed so as to maintain the temperature difference between ambient and air inlet at cleaner within the enclosure well within 5-7 deg centigrade. E) Base Frame : Base frame should be fabricated in sheet metal. The base frame is rugged in construction and designed for mounting engine and brush less alternator closely coupled, with cross members mounted on AVM. The base frame shall have provision for mounting of acoustic enclosure on it. The supply of Gen set includes loading, unloading and transportation charges. F) Fuel Tank : 450Lts. Removable fuel tank shall be fabricated out of 14SWG CRCA MS sheet and is part of base frame. It is duly painted and fitted with inlet and outlet connections and mechanical fuel gauge. Fuel tank can be easily removed for cleaning or any maintenance. First filling of engine oil and 200 litres of diesel for testing the DG set on full load for 8 hours. G) Battery : 12V 180 AH battery mounting the batteries on 1/2" thick hylum sheet base with suitable AI frame work support on floor by the side of generator set. H) Exhaust Piping : DG set should be offered complete with exhaust piping i.e. silencer is mounted and connected by means of MS pipe through flexible pipe to the engine manifold. Entire exhaust piping inside the canopy (cold Zone) is insulated by means of ceramic wool and aluminum gladded.

I) Supply of maintenance and operating manual: 1. Operation & Maintenance manual for Engine with parts list 2. Maintenance Manual for Alternator with parts list 3. Engine test certificate 4. Alternator test certificate 5. Circuit diagram for control panel 6. DG set test certificate 7. Type Approval Certificate and Conformity of Production certificate from the Authorised agencies 7. CPCB compliance label fixed on canopy J) TESTING AND COMMISSIONING : After the installation of DC set on its foundation, the DG set should be tested and commissioned with First charging of lubrication oil to its level, first charging of battery and run the set for eight hours on full load test complete.

Supply and fixing of exhaust pipe with silencer.

Providing suitable concrete foundation with cement concrete 1:2:4 of size of 8mt x 5mt x1.2mt with Suitable landing steps 2 side with sand cushion all around the foundation and erection of generator set with proper alignment over the existing foundation to 250KVA Generator set with ISI standardTransformer, VCB, Ring mains with proper alignment over the existing foundation with ISI standard..

Design, Engineering, supply, fabrication, erection, testing, commissioning and handing over of 1No 20 persons capacity Gearless passenger lift with machine room as per the following Technical specifications Technical specifications: 1. Location: Public entry 2 & Public entry 3 2. No of Lift : 1 No 3. Type of lift : passenger lift 4. Capacity of lift : 20 persons (1360Kgs) 5. Speed : 1.0 M / Sec 6. Type of Drive: Gearless V3F drive permanent Magnet Synchronous Motor Gearless machine with two independent Dynamic braking 7. No. of floors: (Basement + Ground + 3 floors) 8. Total Travel : 16.2 m 9. Leveling Accuracy: High level accuracy with smooth & jerk free stopping 10. Construction of Car: 18SWG High quality S.S 304 Grade car Neat hairline finish, S.S hand rail, Perspex false ceiling. 11. Position of machine: Directly above the lift well. 12. No. of landing entrance: 5 Nos 13. No. of car entrance: one in front only 14. Car entrance door: power operated V3F drive side opening sliding 18SWG stainless steel hair line finish.

31. Sill angles and facia plates: to be provided by lift contractor 32. Steel for lift machinery: to be provided by lift contractor 33. Servicing and maintenance: Free comprehensive servicing and maintenance should be provided by the lift contractor during the guarantee period of one year. 34. Automatic Rescue Device: To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consists of suitable type battery system with charger, inverter, under voltage protection system etc., complete with all accessories. 35. Provision of intercom with phone: To be provided by lift contractor 3 points EPABX system at three places vide 1) inside the car 2) Head room 3) at ground floor attender room 36. Lift License: Preparation of Drawing, payment of charges to CEIG and insurance policies if any and obtaining CEIG safety certificate as per lift act should be done by lift contractor. 37. Floor announciator with music, included 38. Special features: a. Infra red door sensor with full height screen. b. Tubular S.S hand rail in cars. c. Voltage stabilizer for circuit control. d. Stainless Steel signal fixtures. e. Vendal proof S.S. Button with S.S. cover f. SS hairline finish door frames for landing doors. g. VF door Register signal h. Call Register signal

i. Stainless steel facia plate for car operating panel and landing fixtures. j. Steel ladder for machine room and ladder for lift Shaft pit, k. On – Off switch for fan and light l. Over load warning indicator With audio announcement. m. Fall width half height rear panel mirror. 39. Provision of architraves covering all three sides up to a width of 300 decorum sheet of plywood with TW frame with aluminum beading architraves should also cover the thickness of sill level door frame at the landing and indicator boxes at all landings. 40.Other standard features: Voltage stabilizer for control units, over speed governor, phase failure and phase reversal relay alarm bell, T. Guide brackets for car and counter weight, rubber padding under winding unit, motor of adequate capacity, single reduction worm gear, electromagnetic brake with compression springs car safety gears buffer, electro mechanical door locks emergency key side supporting angles, motor over load protection devices final limits switch, main suspension ropes counter weights lifting hoist for mounting the machineries. 41. Guarantee: Guarantee for the materials and workmanship of equipments complete should be offered by lift firm for a period not less than one year. 42. Site testing in accordance with IS 14665 should be carried out at the time of handing over.

Necessary spares and tools required for the maintenance for a period of one year 43. Supply of operation and maintenance manual with Necessary tools for Operation. The list of tools required should be detailed by the contractor in a separate sheet duly signed by contactor. (Johnson/KONE/ OTIS / Eq) (SR)

Design, Engineering, supply, fabrication, erection, testing, commissioning and handing over of 1No 13 persons capacity Gearless passenger lift with machine room as per the following Technical specifications Technical specifications: 1. Location: Public entry 1 2. No of Lift : 1 No 3. Type of lift : passenger lift. 4. Capacity of lift : 13 persons (884Kgs) 5. Speed : 1.0 M / Sec 6. Type of Drive: Gearless V3F drive permanent Magnet Synchronous Motor Gearless machine with two independent Dynamic braking 7. No. of floors: (Basement + Ground + 3 floors) 8. Total Travel : 16.2 m 9. Leveling Accuracy: High level accuracy with smooth & jerk free stopping 10. Construction of Car: 18SWG High quality S.S 304 Grade car Neat hairline finish, S.S hand rail, Perspex false ceiling 11. Position of machine: Directly above the lift well. 12. No. of landing entrance: 5 Nos 13. No. of car entrance: one in front only 14.Car entrance door: power operated V3F drive side opening sliding 18SWG stainless steel hair line finish.

31. Sill angles and facia plates: to be provided by lift contractor 32. Steel for lift machinery: to be provided by lift contractor 33. Servicing and maintenance: Free comprehensive servicing and maintenance should be provided by the lift contractor during the guarantee period of one year. 34. Automatic Rescue Device: To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consists of suitable type battery system with charger, invertor, under voltage protection system etc., complete with all accessories. 35. Provision of intercom with phone: To be provided by lift contractor 3 points EPABX system at three places vide 1) inside the car 2) Head room 3) at ground floor attender room 36. Lift License: Preparation of Drawing, payment of charges to CEIG and insurance policies if any and obtaining CEIG safety certificate as per lift act should be done by lift contractor. 37. Floor announciator with music, included 38. Special features: a. Infra red door sensor with full height screen. b. Tubular S.S hand rail in cars. c. Voltage stabilizer for circuit control. d. Stainless Steel signal fixtures. e. Vendal proof S.S. Button with S.S. cover f. SS hairline finish door frames for landing doors. g. VF door Register signal h. Call Register signal

i. Stainless steel facia plate for car operating panel and landing fixtures. j. Steel ladder for machine room and ladder for lift Shaft pit, k. On – Off switch for fan and light l. Over load warning indicator With audio announcement. m. Fall width half height rear panel mirror. 39. Provision of architraves covering all three sides up to a width of 300 decorum sheet of plywood with TW frame with aluminum beading architraves should also cover the thickness of still level door frame at the landing and indicator boxes at all landings. 40. Other standard features: Voltage stabilizer for control units, Over speed governor, phase failure and phase reversal relay alarm bell, T. Guide brackets for car and counter weight, rubber padding under winding unit, motor of adequate capacity, single reduction worm gear, electromagnetic brake with compression springs car safety gears buffer, electro mechanical door locks emergency key side supporting angles, motor over load protection devices final limits switch, main suspension ropes counter weights lifting hoist for mounting the machineries 41. Guarantee: Guarantee for the materials and workmanship of equipments complete should be offered by lift firm for a period not less than one year. 42. Site testing in accordance with IS 14665 should be carried out at the time of handing over. Necessary spares and tools required for the maintenance for a period of one year

43. Supply of operation and maintenance manual with Necessary tools for Operation. The list of tools required should be detailed by the contractor in a separate sheet duly signed by contactor. (Johnson/KONE/ OTIS / Eq) (SR)

Design, Engineering, supply, fabrication, erection, testing, commissioning and handing over of 1No 10 persons capacity Gearless passenger lift with machine room as per the following Technical specifications Technical specifications: 1. Location: Judges entry 2. No of Lift : 1 No 3. Type of lift : passenger lift. 4. Capacity of lift : 10 persons (680Kgs) 5. Speed : 1.0 M / Sec 6. Type of Drive: Gearless V3F drive permanent Magnet Synchronous Motor Gearless machine with two independent Dynamic braking 7. No. of floors: (Ground + 3 floors) 8. Total Travel : 16.2 m 9. Leveling Accuracy: High level accuracy with smooth & jerk free stopping 10. Construction of Car: 18SWG High quality S.S 304 Grade car Neat hairline finish, S.S hand rail, Perspex false ceiling 11. Position of machine: Directly above the lift well. 12. No. of landing entrance: 4 Nos 13. No. of car entrance: one in front only 14.Car entrance door: power operated V3F drive side opening sliding 18SWG stainless steel hair line finish.

31. Sill angles and facia plates: to be provided by lift contractor 32. Steel for lift machinery: to be provided by lift contractor 33. Servicing and maintenance: Free comprehensive servicing and maintenance should be provided by the lift contractor during the guarantee period of one year. 34. Automatic Rescue Device: To facilitate the landing of the lift to the nearest floor at the time of power failure. This shall consists of suitable type battery system with charger, invertor, under voltage protection system etc., complete with all accessories. 35. Provision of intercom with phone: To be provided by lift contractor 3 points EPABX system at three places vide 1) inside the car 2) Head room 3) at ground floor attender room 36. Lift License: Preparation of Drawing, payment of charges to CEIG and insurance policies if any and obtaining CEIG safety certificate as per lift act should be done by lift contractor. 37. Floor announciator with music, included 38. Special features: a. Infra red door sensor with full height screen. b. Tubular S.S hand rail in cars. c. Voltage stabilizer for circuit control. d. Stainless Steel signal fixtures. e. Vendal proof S.S. Button with S.S. cover f. SS hairline finish door frames for landing doors. g. VF door Register signal h. Call Register signal

i. Stainless steel facia plate for car operating panel and landing fixtures. j. Steel ladder for machine room and ladder for lift Shaft pit, k. On – Off switch for fan and light l. Over load warning indicator With audio announcement. m. Fall width half height rear panel mirror. 39. Provision of architraves covering all three sides up to a width of 300 decorum sheet of plywood with TW frame with aluminum beading architraves should also cover the thickness of still level door frame at the landing and indicator boxes at all landings. 40. Other standard features: Voltage stabilizer for control units, Over speed governor, phase failure and phase reversal relay alarm bell, T. Guide brackets for car and counter weight, rubber padding under winding unit, motor of adequate capacity, single reduction worm gear, electromagnetic brake with compression springs car safety gears buffer, electro mechanical door locks emergency key side supporting angles, motor over load protection devices final limits switch, main suspension ropes counter weights lifting hoist for mounting the machineries. 41. Guarantee: Guarantee for the materials and workmanship of equipments complete should be offered by lift firm for a period not less than one year. 42. Site testing in accordance with IS 14665 should be carried out at the time of handing over. Necessary spares and tools required for the maintenance for a period of one year

43. Supply of operation and maintenance manual with Necessary tools for Operation. The list of tools required should be detailed by the contractor in a separate sheet duly signed by contactor. (Johnson/KONE/ OTIS / Eq) (SR)

Outdoor Units Supply and installation of Inverter Scroll Compressor Modular VRF outdoor units equipped ,special acryl precoated heat exchanger,low noise condenser fan,auto check function for connection error,auto address setting,with multiple outdoor units of capacities and quantities as mentioned below.Refrigerant Shall be R410A . 26 HP

Supply and installation of 4 Way Cassette indoor units with compact cooling coil,electronic expansion valve and multispeed fan motor,The blower shall be dynamicaly balanced and designed for silent operation.With Inbuilt Drain Pump 4 Ton

Supply and installation of Hiwal split indoor units with wire less remote

Supply and fixing of Y & T JOINTS

Supply and fixing of wired remote control

Supply, fabrication and fixing of suitable MS channel for mounting air-conditioning indoor units.

Supply, fabrication and fixing of suitable MS channel for mounting air-conditioning Outdoor units.

Pressure Testing & Commissioning of VARIABLE REFRIGERANT VOLUME/FLOW SYSTEM of below mentioned capacities comprising of Inverter Compressor and complete with the following.100% FULLY INVERTER COOLING MODEL OUTDOOR UNIT

Testing and commissioning of VRF Indoor units

Cassette units

1.0/2.0 Ton Hiwall split units

Supply, installation, Testing & Commissioning of hard/Soft drawn soft refrigerant piping with refnet joints. The brazing to be carried out with bleeding of nitrogen. The copper pipe to be insulated with 19mm thick

41.3 mm; 34.9 mm ;28.6 mm ;22.2 mm ;19.1 mm ; 15.9 mm ;12.7 mm ;9.5 mm ;6.4 mm

POWER CABLES FOR VRV OUTDOOR UNITS

Supply and laying of PVC insulated sealed copper control cable 2C x 1.5 Sq.mm as per relevant IS.

Supply and laying of PVC insulated copper cables 3C x 2.5 Sq.mm for indoor unit power supply as per relevant IS.

Supply, Providing and fixing in position 32mm drain pipe with necessary Insulation for drain cut to required lengths and installed complete with all necessary fittings like elbows, tees & reducers.

Refrigerant gas R410A topping at site for VRV/VRF

Unit lifting shifting , positioning charges for outdoor unit.

Supply erection, testing and commissioning of 2.0 TR (6000 K.cal/Hr) ABS Plastic Split type Inverter Air conditioner conforming to IS 1391 (Part-2) 1992 with Amdt No. 1 to 2 fitted with inverter compressor operating on refrigerant of non CFC suitable for wall mounting for operation on 230V, 50HZ single phase AC supply with 5 star rating as per BEE specification and capable of performing the functions 1) Cooling 2) Dehumidifying 3) Air circulating 4) Filtering The installation work for the above split type AC units inculds the following 1.Mounting /fitting indoor and outdoor units at their respective locations. 2.Laying copper refrigerant pipeof 0.8mm thick of required length connection not exceeding 4 meters distance and both units after drilling hole/holes in the wall if required. 3.Insulating the suction pipe with expanded polyethylene foam 5mm tubing. 4.Laying 20mm dia flexible PVC drain pipe to throw out the condensate water being formed within the indoor unit. 5.Leakage testing the entire system gas in the unit. 6.Charging refrigerant gas in the unit. 7.Suitable electric wiring to be provided with 2.5 sqmm PVC insulated copper wire between indoor units upto 6 mtrs length and up to switch with in 3 meters of the location of indoor unit.(Carrier/O-General/Daikin)

Supply and installation of 5 kVA Electronic Automatic Voltage Stabilizer V- GUARD make VND 500 Model with Input Voltage range of 150Volt - 285Volt and Output Voltage range 200Volts to 230 Volts with High and Low Voltage cut off and 3 minutes time delay relay with demonstration.

Supply and laying of 5/8" and 3/8" soft drawn copper refrigerant pipe of 0.8mm thick by flaring connection with interconnection wire between indoor & outdoor unit and 20mm drain pipe. (Extra beyond 3 mts/AC unit)

Supply and fixing of MS stand for fixing the outdoor unit

Supply and erectIon of 3.0 kVA / 48 V single phase in single phase out DC line interactive Technology sinewave Inverter system for existing load purpose with 3 Nos inverter range 12V/42AH capacity SMF battery for 1 hour backup time depending upon the load condition with connections complete. The Technical specifications of the inverter shall be as follows. a)Capacity 3000VA / 48 Volt DC. with pure sinewave, b)Input voltage range 170V to 270V AC single phase. c)Output Voltage 230V AC single phase d) Back time 1 Hour. e)Digital indication Showing Mains ON,Inverter ON,Low Battery, Battery Voltage, Connected load in watts. f)fuse Protection ,in built resettable circuit breaker Protection .(Inverter make Exide/ Microtek or Eq) g) Battery should be Exide make INVA Master/ Luminous make /Eq with warranty not less than 36 months h) Steel Stand to house inverter and batteries

Supply and Installation of Early Streamer Emission Air Terminal (ESEAT).Lightning Arrester. Model: L The ESEAT has corrosion resistant stainless chrome body made up of AISI 316 grade of height 0.50 metres capable of working in hazardous atmosphere. The Air terminal is non-radioactive and requires no special licensing. The unit is fully autonomous (no battery, no external power supply is required), collects energy from the ambient electric field.The ESEAT model has been tested in a high voltage laboratory in accordance with NFC 17 102 in order to measure the average gain in triggering. The average gain in triggering time (ΔTs) obtained during the lab test for the offered model is 60 μs. The ESEAT works on negative as well as positively polarized discharges. ESEAT has been tested for such discharges in Central Power Research Institute (CPRI). A dedicated tester is avilable to test the healthiness of the ESEAT on request (Page No. 37, Point No. 3 of Clause 8.6 of the Revised NFC 17-102 version 2011 ). ESEAT Model : L - Radius of protection : 86 Metres Level of protection considered for the Project-II level

MOUNTING STRUCTURE: Supply and installation of Standard / Special Mounting Structure of height 4.5 mts. pipe, and 300 x 300 x8mm MS plate, 3 mts.48mm OD class C GI outer pipe,1.8 mtr,3Bmm OD inner pipe, for roof mounting on concrete base and with FRP adapter

DOWN CONDUCTOR:Supply and run of 25mm x 6mm GI Flat Down Condutor with necessary clamps / supports on wall / floor / ground for earth connection

TEST LINK: Supply and fixing of Test Link Box for each Down conductor in order to disconnect the earth termination system to enable measurement of resistance

EARTH ELECTRODE:Supply and insallation maintenance free GI Earthing System comprising of 50mm dia and 2 mtr. long earth electrode of low carbon steel rod with 100 micron bonding and 25 kgs. of carbon based environment friendly backfill compound and suitable clamp.

SURGE PROTECTION: Supply and insallation Cabinet Type Class 1 and 2 Combined Model SPD to arrest surges / overvoltages in the power line due to lightning / switching action etc. they must be installed in the incoming MCC panel / DB of the respective buling in parallel to the power circuit. Model: PSV4-12.5/400TT (3 phase power network)

Preparation of site plan ,physic layout ,eectrical schematic diagram(6 sets) getting drawing approval from CEIG Chennai.Preparation of competion report rectification report etc,arranging CEIG inspection,paying CEIG inspection fees and obtaining saftey certificate from CEIG.

Supply and fixing of AC Chargeable Emergency Lamp 2x11W PL Lamp with all connected accessories (In each floor)

2mx1m Rubber mat suitable for 11 kv installation confirming to IS 15652: 2006 (5 nos)

Supply and fixing of First Aid Box complete with all First Aid Medicines

Supply and fixing of Shock Treatment Chart fixed in glass frame

Supply and fixing of 4 Nos. Fire Buckets made out of 40x40x6mm MS Angle

Supply of Hand Gloves of 11KV Grade

Supply and fixing of Danger Board as required by the Electrical Authorities

Supply and fixing of Fire Extinguisher Co2, 4.5 kg. confirming to TAC Norms

Supply of Earth Discharge Rod

Supply and installation of Bosch Make 30W Wall Mount speaker with suitable wall mount bracket.

Supply and fixing of 65mm dia GI pipe (Class 'B') of 10 meter length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom and with concreting on masonry pedestal with MS box 30cm x 20cm x 10cm with angle iron frame work with foor with lock and key arrangements. [ for fixing CCTV Camera].

Supply and run of Falcon/Orbit 2 core 1.5sq.mm Shielded copper Speaker wire in existing PVC rigid pipe concealed on wall and ceiling

Supply and run of Falcon/ Orbit Make XLR Professional Microphone Cable in exxisting PVC rigid pipe.

Supply and installation of 480W PA Booster Amplifier. Make: Bosch/ Ahuja.

Supply and installation of PA audio mixing consoles stereo which consists of 8 channel mic input Digital effects,Left & Right output controls stereo input, tone control for bass & treble and necessary connection. Make and Model :Sound Craft EPM8/ Studio Master.

Supply and installation of Shure/ AKG/ Senneihser Make UHF Cordless Handheld/ Tie Clip/ Neck Band Microphone system.

Supply and installation of Shure/ AKG/ Senneihser Make XLR Gooseneck Microphone with Base Powered through Phantom. (MR Excl. GST 18%)

Supply, installation, testing and commissioning of Ahuja ADP-30R Make/ Eq. MP3 Recorder Player with USB, SD, MMC Card & Bluetooth. (MR Excl.GST 18%)

Supply and installation of Studiomaster/ Servo Make 1 kVA Voltage stabilizer for PA system.

Supply and fixing of 25mm PVC rigid pipe concealed in wall and ceiling and making good of the concealed portion with suitable colour.

Supply and run of Polycab/ Legrand/ D-Link Make Unarmoured LAN Cable in existing PVC rigid pipe on wall and ceiling.

Supply and erection of 5 kVA 1 Phase UPS (Single Phase In & Single Phase Out) System with Battery and 2 hours back-up.(For LAN & CCTV)

Supply and erection of 2 kVA 1 Phase UPS (Single Phase In & Single Phase Out) System with Battery and 2 hours back-up.

Supply and installation of Impression Make 20 Metre HDMI Cable.

Supply, fixing and termination of D-Link/ Valrack Make 12U Wall Mount Rack with accessories

Supply, installation, testing and commissioning charges of SNEOS NT-IDP12 or NT-IBP12/ Hik Vision/ Dahua Make 2MP Bullet/ Dome Network Super starlight CCTV Camera Efficient S+265/ H.265/ H.264 Codec. compression technology, Clear imaging against strong Back light with 120dB WDR technology,IP66/ IP67 weather proof protection.

Supply and installation of 64 Channel Network Video Recorder with 8 numbers of SATA ports.Make:SNEOS NT-IN20880/ Hikvision /Dahua.

Supply of D-Link Make 16 Port PoE Switches for CCTV IP Camera.

Supply of Western Digital Make or Equivalent 8TB Surveillance Hard Disk for NVR.

Supply and fixing of 4U Rack with accessories and fan with suitable angle iron frame work

Supply and fixing of 6U Rack with accessories and fan with suitable angle iron frame work.

Supply and fixing of 36 Rack with accessories and fan with suitable angle iron frame work.

Supply and installation of Sony KD-50X80J Panasonic/Samsung Make 50 inches 4K Android LED Television with suitable wall mount.(MR Excluding GST 28%)

Supply and installation of V-Guard/ Shakti Make TV Voltage Stabilizer for 140cm (55") TV + Set Top Box +Home Theatre System(Working Range:90-290V;3A). [MR Excl. GST 18%]

Supply and run of 3 core 1.5sq.mm PVC insulated SC unsheathed Cu. Conductor of 1100V grade in existing concealed PVC rigid pipe in wall and ceiling.

Supply and fixing of 5A/15A 3 Pin combined flush type wall socket 15A flush type switch concealed in suitable MS box flush with wall with painting.

Supply and fixing of Honeywell/ APC/ Belkin Make 4 Socket 2 Meter Surge Protector.(MR Excl.GST 18%)

Supply, fixing and termination of I/O Socket for LAN with CAT 6 Module, Single Socket RJ-45 Face Plate and 2 Metre Length Patch Cord. Make:Legrand/ D-Link.

Supply, fixing and termination of D-Link Make 16 Port un-managed 10/ 100/ 1000 LAN Network switch in existing Rack with accessories.

Supply, fixing and termination of D-Link/ TP-Link/ Intellinet Make 16 Port CAT6 Patch Panel Fully Loaded. (MR Excl. GST 18%)

Supply and fixing of 1 Meter Patch cord.D-link /Eq.SR

Supply, installation, configuration and commissioning of NEC SV9100 / Tadiron/ Matrix Make EPABX Base unit for 256 Analog Extensions and 8 Trunks.

Supply and fixing of Beetel/ Panasonic Make Push Button Telephone with Caller ID.

Supply, fixing and termination of Legrand/ D-Link I/O Socket for Telephone with Single Socket RJ-11 Face Plate and CAT 6 PVC Module Box.

Supply, fixing and termination of Standard Make 20 pair MDF Box with module and Krone.

Supply, fixing and termination of Standard Make 50 pair MDF Box with module and Krone. Approved in CER.No. /2021-2022

Supply, fixing and termination of Standard Make 100 pair MDF Box with module and Krone.

Supply and run of Delton/ Polycab unarmoured 0.5mm 2 pair Telephone cable in suitable PVC rigid pipe on wall and ceiling.

Supply and run of Delton/ Polycab unarmoured 0.5mm 20 pair Telephone cable in suitable PVC rigid pipe on wall and ceiling.

Supply and run of Delton/ Polycab unarmoured 0.5mm 50 pair Telephone cable in suitable PVC rigid pipe on wall and ceiling.

Supply and laying of 50mm/38mm HDPE Pipe in the existing trench.

Supply and installation of Video Conference system with 2 Nos. Panasonic KX-VC1000 SX/ AVAYA Point to Point Video conference systems for the configuration of full HD 1080p System with 10X Optical Zoom Camera 7x Digital Zoom with Dual HDMI Output, Mic pod with Remote, Cables Accessories, 2 Nos. 65 inches UHD TV with Stabilizer. (For Vulnerable Witness Court, POCSO, Video Conference and Conference Hall)

Earthing as per P.W.D standard with an earth electrode of 2 Mtr. Class 'B' GI Pipe of Dia not less than 32 mm complete with necessary masonry work.

Supply and run of 1 of No.8 SWG GI wire for earth connection.

R R THULASI BUILDERS INDIA P LTD

Urc Construction P Ltd