Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹26.3 LAccepted-AOC | L1 | Accepted-AOC LOWEST BIDDER | |
| 2 | L2₹26.9 L+₹23,886.80 (0.90%)Rejected-AOC | L2 | Rejected-AOC SECOND LOWEST BIDDER | |
| 3 | L3₹31.2 L+₹4.5 L (16.9%)Rejected-AOC | L3 | Rejected-AOC THIRD LOWEST BIDDER | |
| 4 | L4₹33.8 L+₹7.1 L (26.5%)Rejected-AOC | L4 | Rejected-AOC FOURTH LOWEST BIDDER | |
| 5 | L5₹34.3 L+₹7.6 L (28.7%)Rejected-AOC NEAR PUNJAB NATIONAL BANK KANDOLI NAGROTA JAMMU J K 181221 | JAMMU | JAMMU | JAMMU AND KASHMIR | 181221 | L5 | Rejected-AOC FIFTH LOWEST BIDDER |
Tender Value
₹45 L
EMD Value
₹90 L
Closing Date
7 Mar 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE Nagrota
Garrison Engineer Nagrota Pin-901208 C/O 56 APO
PROVN OF SMART PAINTING ON OVER HEAD TANK AND CERTAIN MISC WORKS UNDER AGE B/R-I UNDER GE NAGROTA
2023_MES_579258_1
GEN-51/2022-23
Open Tender
Civil Works
Works
180 days
Nagrota
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
Yes
₹90 L
Yes
9 May 2023
6 Feb 2023
9 Mar 2023
6 Feb 2023
7 Mar 2023
23 Feb 2023
Amount
M&L for rendering 15 mm thick in CM ( 1:4 ) on wall/ concrete surfaces finished even and smooth without using extra cement using WPC compound including taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water in any position, any height (upto 18Mtr) on Over Head Reserviour Tank (capacity of 100000 and 50000 Gallon) including necessary scafolding requried at site complete all as specified and directed .Notes : 1. WPC shall be measured and paid separetly) 2. The work is to be carried out for overhead reservoirs & the contractor quoted Rates includes all safety measurers required at site / as directed by GE / Engineer-in- Charge for complete safety of Labour during execution of work
M&L for Running welding in repairs thickness of metal to be welded n.exc 6 mm in OHT staircase at any position, any height (upto 18Mtr) on Over Head Reserviour Tank staircase (capacity of 100000 and 50000 Gallon) including necessary scafolding requried at site and quaoted with mind in safety of labour at site complete all as specified and as directed. complete all as specified and directed Note : The work is to be carried out for overhead reservoirs & the contractor quoted Rates includes all safety measurers required at site / as directed by GE / Engineer-in- Charge for complete safety of Labour during execution of work
M&L for Running welding in repairs thickness of metal to be welded exc 9 mm but n. exe 20mm in OHT staircase at any position, any height (upto 18Mtr) on Over Head Reserviour Tank staircase (capacity of 100000 and 50000 Gallon) including necessary scafolding requried at site and quaoted with mind in safety of labour at site etc complete all as specified and as directed. Note : The work is to be carried out for overhead reservoirs & the contractor quoted Rates includes all safety measurers required at site / as directed by GE / Engineer-in- Charge for complete safety of Labour during execution of work
M&L for writing letters or figures (Block. Roman. Italic or Indian) to building with thick synthetic enamel paint of 30cm high and 10cm wide in words and figures such as PS-27,TN-123 & PN-81/2 , save electricity , save water etc over black synthetic enamel painted incl obliterating old writting of any description with paint to match existing work at any position, any height (upto 18Mtr) on Over Head Reserviour Tank staircase (capacity of 100000 and 50000 Gallon) including necessary scafolding requried at site complete all as specified and as directed. Notes 1. PS-27,TN-123 , PN-81/2 & save electricity shall be measured as one unit 2. The work is to be carried out for overhead reservoirs & the contractor quoted Rates includes all safety measurers required at site / as directed by GE / Engineer-in- Charge for complete safety of Labour during execution of work
Complete removal of existing treatment (any number of layers) on OHT plaster surface, scrapping with steel scrapper or any other means,including filling depression of scrapped surface ,priming plaster and other old surface with alkali resistant priming paint from ceiling, chajja, upward facia, downward facia,staircase area and in Roof area, in any position, any height (upto 18Mtr) on Over Head Reserviour Tank (capacity of 100000 and 50000 Gallon) including necessary scafolding requried at site and Material and Labour for apply two coats of Anti fungal weather coat acrylic emulsion paint over finishing old/new plastered walls with premium acrylic smooth exterior paint with silicone additives of required shade applied @ 1.43ltr/10 sqm over including priming coat of exterior primer applied @2.20kg/10sqm a coat of primer including applying 2 -3 mm thick wall putty complete all as specified and directed Note : The work is to be carried out for overhead reservoirs & the contractor quoted Rates includes all safety measurers required at site / as directed by GE / Engineer-in- Charge for complete safety of Labour during execution of work
Make of Arcylic emulsion weather coat paint :- Asian (Apex Ultima) ,Berger (Super coat ) or ICI Dulux (weather shield) .Make of primer :- Asian (X2) or Equivalent . Note:- (a) Each stage i.e. preparation of surfaces, application of primer, application of first coat, application of second coat will be got passed from Engr-in -Charge.(b)Written Warranty for four years or as per manufacturer's instructions, whichever is more is required to be furnished by contractor for this item. Note;- Hives of honey bees and tree routes/branches if any shall be removed by the contractor from OHT and rate quoted this aspect. Note:- (i) Painting work shall be carried out according to smart painting procedure Mentioned in PS.(ii) Painting work shall be carried out directly through a paint manufacturer as approved by GE or their approved applicator. (iii) After completion of work approved paint manufacturer or their approved applicator shall submit warranty for four year on workmanship and warranty on product as applicable.
Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area n. exc 1.5 sqm each complete all as specified and as directed.
Taking down chowkhats or frames with shutter (with out taking off shutters from the frame) area exc 1.5 but nexc 4.0 sqm each complete all as specified and as directed.
Taking down shuters of any description nexc 1 sqm each and removing from site complete all as specified and as directed.
Taking down shuters of any description exc 1 sqm but n.exe 2 sqm each complete all as specified and as directed.
S & F for 2nd class hard wood as in plain, solid straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, complete all as specified and as directed.
S&F for 35mm thick 2nd class hard wood plain, framed pannelled shutters (two panel) with lock rail and panel of 9mm BWP commercial ply or 12mm veneered particle board wiyh commercial veneering on both faces. The size of rail and stile as per (IS : 1003 part-I , kiln seasoned and chemically pressure treated complete all as specified and as directed.
S & F 30 mm thick flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed.
S & F for 35 mm thick factory made, 2nd class hard wood glazed and skeleton shutters open rebeated and prepared to received glass, gauzed, with out sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (a) and for door and fixed with chowkats, chemically pressure treated complete all as specified and as directed.
S & F for 30 mm thick factory made, 2nd class hard wood glazed and skeleton shutters, open rebeated and prepared to received glass, gauzed, with sash bar edges of framing plain, chamfered or rounded, fitted with cut and mitered beads for securing glass etc, size of member of shutter as per specified in SSR Part-I Section 8, clause 8.24 (b) for window and fixed with chowkats, chemically pressure treated complete all as specified and as directed.
S&F for factory made solid PVC door frame of size 50mm x 47mm made out of plain 5mm plain colour PVC sheet reinforced with ms square tube, with wooden grain printed PVC sheet used inserted of plain colour PVC sheet & edges will be painted to match with printed sheet complete all as specified and as directed.
S&F for factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of ms tubes for top & bottom rails. MS frame shall be covered with heat moulded plain colour PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail & bottom rail. Panelling of plain colour PVC sheet to be fitted in the MS frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, complete all as specified and as directed.
S&F for Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 125x60mm complete all as specified and directed
S&F for Pressed steel frames factory made for doors out of 1.25mm thick PBI sheet with one of more rebates including necessary flat iron lugs, hinges, lock strike plate, hinges etc complete, size of frame 105x60mm complete all as specified and directed
S & F for Box type Steel window side hung double shutters with provision for desert cooler/AC(inside for wire mesh & out side for glass), including guard bar,hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded and fixed, steel window shall be conforming to relevant IS complete all as shown on drawing No CEUZ/TD/1302/09, Sh 1/3 to 3/3 and directed. Note:- Wire mesh and sheet glass shall be measured and paid separately
S&F for Box type Steel ventilators top hung double shutters (inside for wire mesh & out side for glass), including hinges, steel handle, tower bolt and steel peg stay complete with glazing bar dovetailed or welded including a coat of red oxide after preparation of surface before fixing.Steel window shall be conforming to relevant IScomplete all as specified and directed.) Note:- Wire mesh and sheet glass shall be measured and paid separately
Supply fabricate & fix in position anodised aluminium powder coated (minimum thickness of powder coating 50 micron) door shutter with frame, partly glazed with 5 mm thick tinted glass and partly panelled with 9 mm thick prelaminated particle board with both side decorative laminated including rubber bead joining cleat for fixing in position, aluminium door handle 150 mm size, aluminium barrel tower bolt 200 mm size etc including taking down or and making good of disturbed surface all as specified below complete all as specified and directed. (a) Frame (top & side) section shall of size 101.60 x 44.75 x 2.4 mm ( Section No 14021) (b) Vertical Members of shutter Section shall be be of size 85.00 x 44.45 x 2.00 mm (Section No 19560) (c) Top Members of shutter Section shall be be of size 83.50 x 44.45 x 2.00 mm (Section No 19581) (d) Lock rail (Middle member) of shutter Section shall be be of size 150.00 x 44.45 x 3.00 mm (Section No 19596) (e) Bottom Members of shutter Section shall be be of size 150.00 x 44.45 x 3.10 mm (Section No 19584) (f) Glazing clip for securing glass of shutters shall be be of 0.80 mm thick (Section No 19370).
Preparation of new wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer.
S & F for stainless steel wire cloth of 0.56mm dia wire and average width of aperture 1.18mm & fixed with tacks or galvanised I wire staples,etc complete all as specified and as directed.
S & F in repair stainless steel wire cloth 0.56 nominal dia of wire and average width of aperture 1.18mm fixed with beading complete all as specified and directed.
M/L sheet glass ordinary quality 3mm thick and glazing with oil putty in squares. not exc 0.5 Sqm each complete all as specified and as directed.
M/L 3mm thick figured glass pin head type in squre nexc o.5sqm in each pane ventilator / window shutter complete all as specified and as directed.
Hacking out old broken glass ( any tickness size ,quality or description ) from wooden frame or steel frame etc and S&F 3.00 mm thick sheet glass ordinary quality and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each panes complete all as specified and directed.
Hacking out old broken glass ( any tickness size ,quality or description ) from wooden frame or steel frame etc and S&F 3.00 mm thick sheet glass figured glass pin head type and glazing with oil putty or wooden beading in square not exceeding 0.50 sqm in each panes complete all as specified and directed.
S&F 100 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.
S&F in repair 100 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.
S&F 75 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.
S&F in repair 75 mm Butt hinges medium weight cold rolled mild steel and fixed complete all as specified and directed.
S&F 150 mm long Aluminum anodized barrel tower bolts of extructed section complete all as specified and directed.
S&F in repair 150 mm long Aluminum anodized barrel tower bolts of extructed section complete all as specified and directed.
S&F 125 mm long Aluminum anodized barrel tower bolts of extructed section complete all as specified and directed.
S&F in repairs 125 mm long Aluminum anodized barrel tower bolts of extructed section complete all as specified and directed.
S&F aluminum alloy handles fabricated anodised of 150 mm long complete all as specified and directed. .
S&F in repair aluminum alloy handles fabricated anodised of 150 mm long complete all as specified and directed. .
S&F for aluminum alloy handles fabricated anodised of 125 mm long complete all as specified and directed. .
S&F in repair aluminum alloy handles fabricated anodised of 125 mm long complete all as specified and directed. .
S&F in repair 300 mm long Aluminium alloy anodised sliding door bolt with hasp staple (bolt type) including fixing clips of sheet, cast or extruded section and fixing bolts and 16mm dia bolt sliding bolts of extruded section complete all as specified and as directed.
Resecuring or easing & adjusting, without taking down, shutters of any description n.exc 1.00 sqm each in same opening complete all as specified and directed.
Resecuring or easing & adjusting, without taking down, shutters of any description exc 1.00 sqm but n.exc 2 sqm each in same opening complete all as specified and directed.
S & F in repairs MS framed work as in doors or gates of angle iron, door frame or other section with gusset plate, rails, braces and stair case etc complete, drilled for fixing of steel sheeting or other covering etc, to prepared for hanging or sliding with including either hooks and hinges also fastening grills, grating, hold fast of doors and windows chowkat etc, with ends of bars shouldered and or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walkways; railings; framework of water tanksand fixing and similar work confirming to fe 290 Gde E-165 complete all as specified and as directed.
S&F in repair Aluminium (extructed section) Door closer hydraulically regulated, desingnatin No. 3, universal type, suitable for door shutter and fixed complete all as specified and directed.
S&F in repair double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed.
S&F 30 mm wide contineous piano hinges mild steel ,bright finish or electro-galvanised complete all as specified and directed.
S&F in repair 25 mm dia mild steel PVC coated drappery curtain rod with brass /nickel chrom polish bracket complete all as specified and directed .
S&F in repair 300 mm ordinary rat tail rod pattern door spring MS incl roller & plate all as specified and as directed.
Taking down cement plaster on brick or concrete surfaces, parapets including raking out joint, hacking for key, scrubbing down with water etc complete all as specified and as directed.
Demolition of brick work built in cement mortar including all quions ,arcches , pillars etc complete all as specified and as directed.
M&L brick work in CM ( 1:6 ) with using sub class `B ` old size brick straight or curved on plan exceeding 6.0mtr mean radius complete all as specified and directed.
M&L brick work in CM ( 1:4 ) with using sub class `B ` old size half brick work straight or curved on plan to any radius radius complete all as specified and directed.
M&L for rendering 10 mm thick in CM ( 1:6 ) on wall/ concrete surfaces finish even and smooth without using extra cement complete all as specified and directed.
M&L for Rendering 15mm thick in two layers [base layer 10mm in CM 1:4 & finishing layer 5mm thick in cement mortar (1:4)] using water proofing compound in 2nd layer only on brick work or concrete surfaces of wall, surfaces finished even and smooth using extra cement complete all as specified & directed. Note : WPC shall be measured and paid for separately.
M&L for 10 mm thick plaster on ceiling in cement mortar 1:4 finished even and smooth without using extra cement complete all as specified and as directed .
Supply only Liquid water proofing compound complete all as spesified and directed.
Extra for forming fair finished surfaces of drain 30 cm inner girth in cement concrete using extra cement including forms mouldy mittered/ stopped ends complete all as specified and as directed..
M&L for PCC 1:2:4 type B-0 using 12.5mm graded crushed stone aggregate as in coping complete all as specified and as directed.
M&L for cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregatre as in surface channels and drains complete all as specified and as directed.
M & L for preparation of new plastered surface of wall and applying two coats of oil emulsion distember over a coat of over a coat of cement primer over a coat of wall care putty 3 m thick to make the surface even & smooth complete all as specified and directed.
M & L for preparation of new plastered surfaces of walls and applying two coat of cement based paint over a coat of cement primer complete all as specified and directed
M & L for preparing new surfaces of wall and applying three coats of white wash on ceiling and cornices complete all as specified and directed.
M & L for Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified.
Demolition of cement concrete in ground floor and paving not exceeding 15cm thick ( below or above ground level ) complete including removal of debries out side MD land all as specified and as directed .
M&L for 25mm thick PCC (1:2:4) type B-0 using 12.50mm graded crushed stone aggregate as in sub base, levelling course, etc complete all as specified and as directed.
M&L for 40mm thick PCC type B1 (1:2:4) using 20 mm graded stone crushed stone aggregate as in flooring complete all as specified and directed.
M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 6 fixed in repairs complete all as specified and directed.
M&L for non –skid ceramic coloured tiles 7-8mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exc 0.36 sqm in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed in CM 1: 6 fixed in repairs complete all as specified and directed.
M&L for scratch free vitrified ceramic tiles 10mm thick (square or rectangular) area of each tile not exceeding 0.36 sqm ,in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15mm thick screed bed or bedding layer in CM 1:6 fixed in repairs complete all as specified and as directed.
All as per item no 71 above but as in skirting/ dado etc with over and including 10mm thik backing coat in cement mortar 1:4 an wall complete all as specified and as directed.
M&L for glazed ceramic coloured tiles of size 300x250x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over 10 mm thick backing coat on fair faces of brick work in CM (1:4) fixed in repairs complete all as specified and as directed.
M&L in repair for glazed ceramic coloured tiles of size 300x450x7 mm thick as on vertical surfaces such as wall, dado ,skirting etc set and jointed in neat cement slurry and pointed with coloured cement to match over 10 mm thick backing coat on fair faces of brick work in CM (1:4) complete all as specified and as directed.
M&L for 75 mm thick PCC1:4:8 type D-2 using 40mm graded as in foundation, sub base of floor, etc complete all as specified and directed
M&L for chequered cement concrete tiles with grey cement and pigment of size 25cmX25cmX25mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 fixed in repairs complete all as specified and directed.
M&L for chequered cement concrete tiles with grey cement and pigment of size 30cmX30cmX30mm thick ,set and jointed and pointed in neat cement slurry in floor etc over and including 15mm thick screed bed in CM 1:6 fixed in repairs complete all as specified and as directed.
M & L for 10mm thick joint free 'Endura cool roof (SRI) tile' in light shed floor tiles (square/ rectangular) area of each tiles exc 0.09 sqm but n exc 0.18 sqm,in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the surface over and including 15mm thick screed bed or bedding layer in CM (1:6) fixed in repairs complete all as specified and as directed.
All as per srl No 78 above but as in skirting /dado etc with over and including 10 mm thick rendering in cement mortar 1:4 on wall complete all as specified and directed.
M & L for 75mm thick cement concrete 1:3:6 type C2, with using 40mm graded stone aggregate as in floor/ plinth protection finish the surface even and smooth without using extra cement including filling the expansion joints with bitumen filler / filler boards and necessary form work etc complete all as specified and as directed.
Dismantling of stone slab and tiles of any description or thickness in floors, aprons laid dry or bedded and pointed in any type of mortar complete all as specified and as directed.
M & L for machine cut kota stone slab flooring 20 to 25mm thick (size not less than 550mm x 550mm) laid & jointed with grey cement mixed with pigment to match the shade of slab including rubbing and mirror finish polishing finished laid over and including 20mm thick screed bed or bedding layer in CM 1:6 complete all as specified and as directed.
M & L for machine cut kota stone slab flooring 18 to 20mm thick as in riser of step, dado and skirting over and including 10mm thick 1:4 CM backing coat on vertical surface of wall with rubbing and mirror finish polishing finished complete all as specified and as directed.
M&L for 15-18 mm thick green marble of approved quality of any size set and jointed in grey cement slurry laid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges compete all as specified and as directed.
M&L for 18 mm thick Black granite slab of approved quality of any size bedded and jointed in grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone laid over and including 15 mm thick screed bed in CM (1:4) including granite polish to be done by mechanical grinder and moulding edges complete all as specified and directed.
M&L in repair for 60mm thick machine pressed precast concrete interlocking paver block (glossy finish) of M-35 Gde of approved shape, size and colour conferming to IS 15658-2006 and laid over and including 25mm thick sand cushion complete all as specified and as directed.
S & F for precast cement concrete type B-1 (1:2:4)(20mm graded stone aggregate ) as in kerb and edging to road and footh path, etc including chamfered,weathering, throating etc and setting in CM (1:4)c complete all as specified and as directed.
M & L for stain cutting or grinding of terrazoo flooring / kota stone flooring and other stone flooring of any description and in any position, mirror polishing by machine in horizontal or vertical surface complete all as specified and as directed.
Demolition of cement or lime concret in any despription along with tarfelt treatment and cement mortar bedding from roof removal rubbish out side MD land complete all as specified and directed.
M&L Plain cement concrete type B1 (1:2:4) using 20mm graded stone aggregate as in levelling course and other works as in roof, kerb, padding etc incl formwork complete all as specified and as directed.
M&L for water proofing treatment to non accessible roof and edges (vertical or tapered) etc. in following sequence:- (i) Properly cleaning and drying the surface (ii) Applying a coat of bitumen primer @ 1.2Kg/Sqm and primer shall be allowed to dry over night. (iii) Laying APP based modified water proofing membrane of weight not less than 3kg per sqm and thickness not less than 3 mm, with 100mm overlaps, sealed and bonded to the surface by 'torchon' method (iv) Applying two coat of bituminous based aluminum painting @ 0.15 kg/Sqm each coat on water proofing treatment with preparation of surfaces complete all as specified and directed
Cleaning and removing all dirts and scales from service water tanks and from mouth of circulating pipes etc capacity of tank exceeding 250 ltr but not exceeding 500 ltr complete all as specified and directed.
All as per item no 92 above but exceeding 500 ltr but not exceeding 1000 ltr capacity complete all as specified and directed.
S& F in repair Rotational moulded Polyethylene water storage tank 500 liters capacity (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I incl brass float valve 20mm dia complete all as specified and directed.
S& F in repair Rotational moulded Polyethylene water storage tank 1000 liters capacity (cylidrical vertical with closed top) hoisted and fixed in position all as specified in SSR part I incl brass float valve 20mm dia complete all as specified and directed.
Taking up or down 15 mm dia old serviceable / unserviceable steel tubing any grade and connections cleaning for re-fixing or removal to store complete all as specified and directed .
All as per item no 96 above but 20mm bore complete all as specified and directed.
S&F steel tubing medium grade ,galvanized with all fitting such as bend ,elbow, socket,tees,and fixed complete to wall or in ceiling or in floors including cutting threading and making forged bends on pipes MS hooks etc ,for 15mm bore pipes complete all as specified and as directed.
All as per item no 98 above but 20mm bore complete all as specified and as directed.
S&F in repair for 15mm bore bib taps chromium plated with crutch or butterfly handle ,screwed down , screwed for iron pipes or brass ferrule complete all as specified and directed.
S&F in repair fancy type chromium plated15mm bore bib tap two way cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified and directed.
S&F in repair stop valves fancy type chromium plated with long shanks fixed with 15 mm dia bore pipes complete all as specified and as directed.
S&F in repair pillar taps (swan neck type) cast copper alloy with capstan head, screwed down ,high pressure with long screwed shanks and fly nuts fixed in 15 mm bore pipes complete all as specified and directed.
S&F in repair CP angle stop cock of 15mm bore screwed down for high pressure with crutch or butter fly handle ,screwed both end for iron pipes complete all as specified and directed..
S&F in repair fancy type chromium plated15mm bore two way angle valve cast copper alloy with crutch or butterfly handle, screwed for iron pipe or brass ferrule etc complete all as specified and as directed.
S&F in repair CP mixer for mixing hot & cold water screwed down for iron pipe 15mm bore complete all as specified and as directed.
S&F in repairs concealed stop valves fancy type chromium plated with long shanks and cup fixed with 15 mm dia bore pipes complete all as specified and as directed.
S&Fixed in repair 125 mm size chromium plated shower rose with siwel joint suitable for 15 mm bore GI pipes comlete all as directed..
S&F in repair vitreous china wash down water closet pedestal pattern white excluding flushing cistern and flush pipes complete all as specified and as directed .
S&F in repair vitreous china squatting pan `Orissa ' pattern of size 580x440mm white with integral foot rest (excluding flushing cistern and flush pipes) including connection to trap and to flush pipe etc and lime concrete bedding including 'P' or 'S' trap complete all as specified and as directed.
M&L in repairs PVC valve less,syphonic action type flushing cistern,low level ,white with inlet ball valve,float and handle including brackets and connection to pipe and fixing of chain and pull or lever if any complete all as specified and directed.
S&F in repair health faucet with flexible pipe of one mtr length including wall hook for EWC complete all as specified and as directed. .
S&F in repair vitreous china wash hand basin white flat back, size 550x400 mm including bracket but excluding taps ,waste pipes , chain and plug etc complete all as specified and directed.
S&F vitreous china urinal bowl type flat back, size of 465x355x265mm white (min)with grating and union for discharge pipe, urinal spreader with waste pipe and all fiting for urinal complete all as specified and directed..
M&L in repairs for cast iron floor trap with grating including jointing to waste pipes in cement concrete (1:2:4) type B-1 using 20 mm graded crushed stone aggregate ,75mm dia outlet complete all as specified .
S & F in repairs PVC (SWR) floor trap plain or multi with stainless steel grating incl joining to waste pipe with solvent cement joint dia of outlet 75mm bore complete all as specified and as directed.
S&F kitchen sink with drainage board made of stainless steel 1.0 mm thick in kitchen with plug , washer and waste including bedding layer in CM (1:6) in wall or including fixing cantilever bracket and connecting union to pipes over all size 915x460 mm bowl size 410x330x160 mm including taking out unserviceable kitchen sink fixed in repairs complete all as specified and as directed.
M&L for stain less steel plate rack of size of not be less than 900x1200 mm made out of 1 mm thick of best qualityand , weight of rack shall not be less than 8.5 Kg eachfor kitchen with suitable hanging arrangement and fixed to wall fixed in repairs complete all as specified and as directed.
S&F in repairs PVC connection 15mm size with PTMT nuts of length 450 mm long complete all as specified and as directed.
S & F in repairs 110mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trenches complete all as specified and as directed.
S & F in repairs 75mm bore PVC (SWR) pipes singles socket in any length with rubber ring joints fixed to walls or floor or in trenches complete all as specified and as directed.
S&F cast iron soil waste and vent pipes in any length with or without ears with lead joints in trenches or in floors using sand cast CI pipes 75mm bore pipes etc complete all as specified including dismantling old pipe complete all as specified and directed.
All as per item No 122 above but for 100mm bore
S&F 110mm bore PVC (SWR) bends any radius complete all as specified and as directed.
S&F 75mm bore PVC (SWR) bends any radius complete all as specified and as directed.
S & F 110 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.
S & F 75 mm bore PVC (SWR), junction single, (Single T) equal or unequal complete all as specified and directed.
S&F in repairs of brass CP tubular towel rail 20 mm dia 60cm long between flange with brackets etc as in repair complete all as specified and directed.
S&F in repair of 15mm bore ball valve high pressure of PTMT( Min Weight 210 gms) with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed complete all as specified and directed..
S&F in repair of 20mm bore ball valve high pressure of PTMT ( Min Weight 210 gms) with epoxy coated aluminum rod & high density plastic ball screwed for iron pipes and fixed complete all as specified and directed..
S&F in repair 0.50mm thick (including coated thickness) pre-colour pre- profiled (Galvalume/zinkalume) sheets of required colour and design having tensile strength of 550 Mpa as in roof sheeting/sunshade/ wall cladding, north light curves, fixed with zinc coated self drilling fastener including EPDM washer complete laid with one corrugation side laps and min 150mm end lap laid to slope all as per manufacturer / profile maker instruction complete all as specified and as directed.
Dismantling wrought iron or mild steel work of any description complete all as specified and directed.
M&L steel work in tubular trussles, purlins, rafter, tubler column, where connected common rafter and running rails fixed with angle cleat or other connection plates including special shaped washer etc, complete using ERW or induction butt welded tubes conforming IS-1161-1979 grade ST-240 complete all as specified and directed.
Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement complete all as specified and directed..
M&L for Cutting chases, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing etc., and making good to match existing finishes cutting not exc 10cm girth complete all as specified and directed.
M&L for preparation of new or untreated steel surfaces of any description, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.
S & F in repairs aluminium anodized / GI powder coated snap grid frame work of grid size 605x605mm including 6mm dia GI hangers (upto 1200mm long) for false ceiling including notching and preparing holes, including aluminium / powder coated cleat / corner pieces and GI 4mm dia,suspenders with utterfly clips, wall angle of size 24x24mm, main runner (tee) of size 24x38mm, cross tee of size 24x28mm, (No of suspenders shall be decided by the GE as per actual size requirement) including 6mm thick fibre cement plain building boards fixed to aluminium /GI powder coated snap grid and provinding two coats of oil bound distemper and including dismantling of a;; and ceiling board, any thickness including cover fillets if any complete all as specified and as directed.
S&F POP 12mm thick Seamless calcium silicate ceiling made out of 1800 x 1200mm size board of siliceous and calcareous material reinforced with cellulose fibre fixed to the ceiling section with 25mm long self drilling and tapping screws having philips head with under head cutter at 200mm center to centre including finishing thr joints of face board with specially formullated jointing compound and 48 mm wide fibre tape to provide seamless finish with 12 mm thick for seamless false ceiling fixed with screw over and including Gl frame of Gl 0.55 mm thick l flanges of 20 and 30 mm and web of 27 mm fixed to surrounding wall using nylon sleeves and screws at 450 mm centre to centre / intermediate channel 0.9 mm thick having two equal flanges of 15 mm each and web of 45 mm suspended from soffit at approx 900 mm centre to centre with Gl cleat and steel expansion fasteners with and including ceiling section (not exc 1.2 m length) of 0.55 mm thickness having kurled web of 50 mm and flange of 26 mm each with lips of 10.5 mm fixed to the intermediate channel with connecting clips across the intermediate channel at 457 mm centre to centre complete as per manufacturer instruction complete all as specified and directed.
Preparation of old decorated plastered surfaces or un plastered surfaces of wall including cornice and pillers of and applying two coat of white wash complete all as specified and directed.
Removal of exisiting treatment on ceiling including preparation and applying two coat of white wash on ceiling complete all as specified and as directed.
Preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying one coat of oil emulsion distemper complete all as specified and as directed .
Removal of existing treatment and preparation of old decorated plastered surfaces or un-plastered surfaces of wall and applying two coat of oil emulsion distemper over pone coat of primer complete all as specified and directed .
M&L preparation of old plastered surface of wall after removal of existing treatment and applying two coat of acrylic emulsion (Plastic emulsion ) over a coat of oil base primer over and incl 1-2mm thick wall care putty complete all as specified and directed.
M & L for Finishing walls with textured exterior paint of required shade : New work (Two or more coats applied @ 3.28 ltr/10 sqm) over and including priming coat of exterior primer applied @ 2.20kg/10 sqm complete all as specified.
Complete removal of existing treatment and applying two coat of synthetic enamel paint on wooden surfaces of any description over 10 cm width or girth over one coat of pink primer complete all as specified and as directed.
Complete removal of existing treatment and applying two coats of synthetic enamel paint on steel surfaces of any description over 10 cm width or girth complete all as specified and as directed.
M&L for complete removal of old/new decorated surfaces of wall, pilaster, cornices etc by brooming down or steel wire brushing, scrapping down and washing with water after completion of precoat treatment apply twocoats of anti fungal weather coat acrylic emulsion paint over a coat of primer (X2) complete all as specified and directed. Make of Arcylic emulsion weather coar paint :- Asian (Apex Ultima), Berger (Super coat) or Arcylic emulsion weather coat Make of primer :- Asian (X2) or equivalent. Note :- (a) Each stage i.e preparation of surface, application of primer, application of first coat, application of second coar will be got passed from Engr-in-Charge. (b) Written warranty for four years or as per manufacturer's instructions, whichever is more is required to be furnished by contractor for this item.
Demolition of reinforced cement concrete of any description and in any position not otherwise described ( reinforcement cut as to facilitate demolition ) comlplete all as specified and directed.
M&L RCC type B-1 1:2:4 using 20mm graded stone aggregate as in kitchen shelves etc complete all as specified and directed.
M&L form work to suspended slab as in kitchen shelves, cubboards, etc complete all as specified and directed..
M&L TMT bar 10 mm dia and over, cut to length, bent to shape required ,including cranking ,bending spirally for hooping for columns,hooking end and binding with and including mild steel wire and annealed not less than .9 mm dia or securing with clips complete all as specified and directed.
Taking down cement plaster or decayed portision of concrete from ceiling, chajja, upward facia, downward facia in any position, any height (upto 3nd floor) and making good by, rendering 15mm thick with CM 1:4 or PCC 1:2:4 type B1 (using 20mm graded aggtregate) as in ceiling or concrete surfaces such as chajja, upward facia, downward facia and similar work finished even and fair including dubbing coat without using extra cement upto, any height ( upto 2nd floor) including necessary scafolding complete all as specified and directed.
S&F 12mm thick toughened or tampered glass (tuffen glass) thermal and chemical treated with heavy strength of fine polished edge as in doors with SS long body handle, pivots, floor springs and locking arrangements of heavy duty accessories. It made from annealed glass via a thermal tempering process and toughening process. The glass compressive strength should bot be less than mps, itching and cluster work as per sample kept in GE's office complete all as specified and directed by manufacturer's instruction complete all as specified and directed.
AMNEET PAUL SINGH
M/S MANISHA BUILDERS
R.K. Works
M/s Khajuria Construction Co.
Kalsi Engineers and contractors
Nitika electricals and engineers works
Shri Karshni Builders
MAMTA ENTERPRISES
Bidder Name
Shri Karshni Builders
Nitika electricals and engineers works
MAMTA ENTERPRISES
M/S MANISHA BUILDERS
M/s Khajuria Construction Co.
R.K. Works
Kalsi Engineers and contractors
G N TRADER AND BUILDERS
AMNEET PAUL SINGH
stage.html
html • 0.07 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .