Renovation of damaged bituminous road at various locations using Cement Concrete Road (Rigid Pavement) between Rimbick Bifurcation Point and Gumbadara Helipad under Rammam Hydel Project, St.-II

Earth work in excavation of foundation of structures as per drawing and technical specification, including setting out, removing, spreading or stacking of spoils within a lead of 150 m. as directed and including trimming the sides of the trenches, leveling, dressing and ramming the bottom, and backfilling with approved material complete as per direction of the Engineer-in-Charge .I. In all sorts of soil excluding marshy soil & rocks (soft or hard) by manual means. a) upto 3 m depth. (iv) Without pumping out water and shoring . V/P-284, I-12.01, PWD SOR (Road)

Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of stone masonry, including disposal of unserviceable material and stacking the serviceable material with all lift and lead of 1000 m as per Technical Specifications Clause 202 for Rural Roads of MORD. (d) Dry Rubble Masonry Note: Credit for retrieved stone from masonry work may betaken as per actual availability. V/p-234,I-02.07 (V)of PWD SOR(Roads)

Labour for laying 150 mm to 200 mm boulder soling including rough dressing hand packing and ramming down small pieces in the interstics including rolling and preparing the bed to proper level and filling up all joints with sandy clay or earth.(Analysed)

(II) Cement concrete with 30 mm down graded shingles excluding shuttering.N.B. Variety. In ground floor.(a) 1:3:6 proportion.V/P-34, I-22(b), Sl-45 3rd Corrigenda, PWD SOR (Building)

Ordinary cement concrete ( 1:2:4) with graded stone chips ( 20 mm nominal size) excluding shuttering of reinforcement, if any, in ground floor as per relevant IS codes. b)River bazree V/P-24, I-4b PWD S.O.R (bldg.), 3rd corrigenda

Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(i) Tor steel/Mild Steel (iii) Other Manufactures not specified V/P-44, I-40 (a) & (b), 10th corrigenda, PWD SOR (Building)

Plum concrete work with 40 % cement concrete with 30 mm down graded stone metal and 60 % stone boulder of size 150 mm and above, placed in position as directed excluding shuttering if any. i) (1:3:6) proportion V/P-13, I-34 PWD S.O.R(bldg.), 3rd corrigenda

Hire and labour charges for Shuttering with or without staging upto 4.0 m height using approved stout props with wooden planks/ply wood/steel sheet plate with required bracing for any kind of plain or reinforced concrete works in all sorts of minor structure including culvert, box culvert, crossdrain etc. The rate is inclusive of fitting, fixing and striking out after completion of work as per specification and direction. (b) Where staging is not required. V/P-332, I-18.05 PWD S.O.R (Roads)

Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface].(II) With 1:4 cement mortar. (a) 20 mm thick plaster. i) In superstructure, ground floor V/P-189, I-1.ii., PWD SOR (Building)

Neat cement punning about 1.5mm thick in wall, dado, window sill, floor etc. V/P-192, I-15PWD S.O.R (bldg.)