REPAIRS TO KALI MASJID INCLUDING DEPARTMENTAL PARKING, TAJ GANJ, AGRA

Amount

Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. (Rate Including GST).

Earth work in excavation by manual means over areas (exceeding 30 cm in depth, 1.5m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be leveled and neatly dressed. (Rate Including GST).

Surface dressing of the ground including removing vegetation and inequalities not exceeding 15 cm deep and disposal of rubbish, lead up to 50 m and lift up to 1.5 m. (Rate Including GST).

Providing and laying cement concrete of specified grade excluding the cost of centering and shuttering all work up to plinth level 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources). (Rate Including GST).

Providing and laying cement concrete 1:2:4 (1 cement : 2 coarse sand (zone-III) : 4 graded stone aggregate 20 mm nominal size) in coping, including mixed colouring pigment matching to original. (Rate Including GST).

Brick work with cement mortar 1:6 (1 cement : 6 coarse sand) common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth. (Rate Including GST).

20 mm cement plaster on brick wall of mix: 1:4 (1 cement: 4 coarse sand). (Rate Including GST).

Random rubble masonry with hard stone for pitching wall (Departmental collected from Khan-I-Alam side, River side and Agra Fort by tractor trolley and manual labour including preparing by old stone slab) in foundation up to plinth level with cement mortar 1:6 (1 cement : 6 coarse sand). (Rate Including GST).

Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. Hot finished welded type tubes. (Rate Including GST).

Providing and fixing recoated galvanized iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+ 0.05 %) total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length up to 12 metre or as desired by Engineer-incharge. The sheet shall be fixed using self drilling /self tapping screws of size (5.5x 55 mm) with EPDM seal, complete up to any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. (Rate Including GST).

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade Two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture. (Rate Including GST).

Providing & fixing 65 mm thick fine dressed red sand stone flooring over 25 mm thick lime mortar 1: 1: 1 ratio (1 Unslaked Lime : 1 Coarse Sand : 1 Surkhi of 1st class bricks) after taking out very carefully old & decayed red sand stone floor and pointing the same mortar including supply of all materials, labour, T.& P. etc. required for proper completion of work including pointing. (Rate Including GST).

Providing and fixing 12cm. thick Red sand stone Dilla as per existing design chiseled dressed having depressed and molding work and set in 1:1:1 ratio mortar (1 U Lime : 1 C. Sand 1 Surkhi of 1st class bricks) after taking out old stone and pointing with same mortar, matching to the stone including supply of all materials labour T &P etc. required for proper completion of work. (Rate Including GST).

Providing & fixing red sand stone work as Dab - Quid chiseled dressed in all exposed surfaces, including chilling out old and decayed dab & quid and set with 1:1:1 ratio lime mortar (1 Lime, 1 Surkhi of 1st class bricks,1 Coarse Sand) including supply of all materials labour T. & P.etc required for proper completion of work. (Rate Including GST).

Providing and fixing red sand stone DASA with PAN PATTI designed on exposed surface chiseled dressed and set in mortar 1:1:1 ratio (1 Lime, 1 Surkhi of 1st class bricks,1 C. Sand) including taking out old & decayed Pan Patti Dasa including supply of all materials labour T&P etc.for proper completion of work. (Rate Including GST).

Providing and fixing 15cm thick Red sand stone work in chiseled dressed on all exposed surfaces and moulding on front face as Gola-Galta set in composite 1:1:1: ratio lime mortar (1 Lime, 1 Shurkhi, 1 C sand) mixed with composite materials including pointing with same mortar with and ademixture of pigment matching to the stone shade and including takingout old decayed and broken red sand stone by chiseling bit by bit very carefully without disturbing to the adjoining stones. (Rate Including GST).

Shifting of existing LED Street light upto a distance of 4 mtr. Horizontaly including wirring, welding, labour etc. for the proper completion of the work. (Rate Including GST).

Removal of settled debris/malwa from out side of site using manual labour and tractor trolly & throwing from site to out side of mumicipal limit and existing site. (Rate Including GST).

M/s PAPPAN ELECTRIC AND GAS WELDING WORKS

M/S HARISH SHARMA

Baba Construction