SOPD_G_24_25_06 Construction of (i) Hati Ali from Ch.0.0 m to Ch.3300.00 m (ii) Keya Pathar Road from Ch.0.0m to Ch.2500.00 m (iii) Naloni to Dolopa LP School from Ch.0.0m to Ch.3200.00 m under SOPD-G for the year 2024-25.

Amount

(i) Hati Ali from Ch.0.0 m to Ch.3300.00 m Clearing and grubbing road land including uprooting rank vegetation, grass, bushes , shrubs , saplings and trees girth upto 300mm , removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned up to lead of 1000m including removal and disposal of top organic soil not exceeding 150 mm thickness.

Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202. (a) Up to 600 mm dia Hume pipe

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300.1 and 300.2 with a lead upto 1000m as per Technical Specification Clause 301.5 (i) Private Land

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads , transporting to site, spreding , grading to required slope and compacted to meet requirement of Table(300-2) with lead upto 1000m as per Technical Specification Clause303.1. (i) Private Land

Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface , mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density , complete as per cl.401. (ii) For Grading II Material

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405.(A) By Manual Means

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber , applying and brooming requisite type of screening/ binding material to fillup the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per Technical Specification Clause 405.(A) By Manual Means

Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per Technical Specification Clause 502.

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous /granular sueface cleaned with mechanical broom (including cost of testing of materials at site and laboratory as directed by the department) (I) With Bitumen emulsion CSS -1h (c) Granular surface treated with primer

Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5% of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.508. complete in all respect. including carriage of mixed materials up to 10.0 Km initial lead from mixing plant ) (Including cost of testing of materials at site and laboratory as directed by the deptt.) With hydrated lime/cement as filler ( refer table 500-9 of MoSRT&H specification) With 60/70 or VG-30 grade bitumen for GradingII(10 mm nominal size)

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.

Bedding for Pipe: (B) Type B( First Class) Bedding Laying(First Class) bedding on well compacted sand,moorum or approved granular material as per Clause 1105(ii) (ii) Granular Material

Plain Cement Concrete M10(1:3:6 nominal mix)in levelling course below open foundation of Head Walls as per drawings & Technical Specification Clause 1109

Brick masonry work in cement mortar in foundation of head walls complete as per drawing and Technical Specification Clause 1100(A) Brick ,Masonry in 1:4 cement mortar

Providing and laying reinforced cement concrete pipe NP3 for culverts on fiurst class bedding of granular material in single row including fixing collar with cement mortar 1;2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. (B)1000mm dia

Plastering with Cement mortar (1:4) 15 mm thick on brickwork in substructure as per Technical Specification

Providing and fixing of retro-reflectorised cautionary,mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting,1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mmx 450 mmx 600 mm, 600 mm beow ground level as per drawings and Technical Specification Clause 801 (i) 900 mm equilateral triangle

Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701

Providing hump type speed breaker With DBM

Providing hump type speed breaker With BC

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area ,thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35.The finished surface to be level,uniform and free from streaks and holes and conforming to the MoSrt &H specifications.

Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H's fixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance.

(ii) Keya Pathar Road from Ch.0.0m to Ch.2500.00 m Clearing and grubbing road land including uprooting rank vegetation, grass, bushes , shrubs , saplings and trees girth upto 300mm , removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned up to lead of 1000m including removal and disposal of top organic soil not exceeding 150 mm thickness.

Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202. (a) Up to 600 mm dia Hume pipe

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300.1 and 300.2 with a lead upto 1000m as per Technical Specification Clause 301.5 (i) Private Land

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads , transporting to site, spreding , grading to required slope and compacted to meet requirement of Table(300-2) with lead upto 1000m as per Technical Specification Clause303.1 .(i) Private Land

Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface , mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density , complete as per cl.401. (ii) For Grading II Material

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405.(A) By Manual Means

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber , applying and brooming requisite type of screening/ binding material to fillup the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per Technical Specification Clause 405.(A) By Manual Means

Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per Technical Specification Clause 502.

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous /granular sueface cleaned with mechanical broom (including cost of testing of materials at site and laboratory as directed by the department) (I) With Bitumen emulsion CSS -1h (c) Granular surface treated with primer

Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5% of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.508. complete in all respect. including carriage of mixed materials up to 10.0 Km initial lead from mixing plant ) (Including cost of testing of materials at site and laboratory as directed by the deptt.) With hydrated lime/cement as filler ( refer table 500-9 of MoSRT&H specification) With 60/70 or VG-30 grade bitumen for GradingII(10 mm nominal size)

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.

Bedding for pipe (B) Type B( First Class) Bedding Laying(First Class) bedding on well compacted sand,moorum or approved granular material as per Clause 1105(ii) (ii) Granular Material

Plain Cement Concrete M10(1:3:6 nominal mix)in levelling course below open foundation of Head Walls as per drawings & Technical Specification Clause 1109

Brick masonry work in cement mortar in foundation of head walls complete as per drawing and Technical Specification Clause 1100 (A) Brick ,Masonry in 1:4 cement mortar

Providing and laying reinforced cement concrete pipe NP3 for culverts on fiurst class bedding of granular material in single row including fixing collar with cement mortar 1;2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. (B)1000mm dia

Plastering with Cement mortar (1:4) 15 mm thick on brickwork in substructure as per Technical Specification

Providing and fixing of retro-reflectorised cautionary,mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting,1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mmx 450 mmx 600 mm, 600 mm beow ground level as per drawings and Technical Specification Clause 801 (i) 900 mm equilateral triangle

Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701

Providing hump type speed breaker With DBM

Providing hump type speed breaker With BC

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area ,thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35.The finished surface to be level,uniform and free from streaks and holes and conforming to the MoSrt &H specifications.

Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H's fixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance.

(iii) Naloni to Dolopa LP School from Ch.0.0m to Ch.3200.00 m Clearing and grubbing road land including uprooting rank vegetation, grass, bushes , shrubs , saplings and trees girth upto 300mm , removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable materials to be used or auctioned up to lead of 1000m including removal and disposal of top organic soil not exceeding 150 mm thickness.

Removing all types of Hume pipes and stacking within a lead of 1000 m including Earthwork and Dismantling of Masonry Works as per Technical Specification Clause 202. (a) Up to 600 mm dia Hume pipe

Construction of embankment with approved material obtained from borrow pits with a lift upto 1.5 m transporting to site, spreading, grading to required slope and compacting to meet requirement of Table 300.1 and 300.2 with a lead upto 1000m as per Technical Specification Clause 301.5 (i) Private Land

Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts & leads , transporting to site, spreding , grading to required slope and compacted to meet requirement of Table(300-2) with lead upto 1000m as per Technical Specification Clause303.1 .(i) Private Land

Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface , mixing by mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density , complete as per cl.401. (ii) For Grading II Material

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2 as per Technical Specification Clause 405.(A) By Manual Means

Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with vibratory roller 8-10 tonnes in stages to proper grade and camber , applying and brooming requisite type of screening/ binding material to fillup the interstices of coarse aggregate, watering and compacting to the required density grading 3 as per Technical Specification Clause 405.(A) By Manual Means

Providing and applying primer coat with Bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.90- 1.2 kg/sqm using mechanical means as per Technical Specification Clause 502.

Providing and applying tack coat with bitumen emulsion using emulsion pressure distributor at the rate of 0.20 kg per sqm on the prepared bituminous /granular sueface cleaned with mechanical broom (including cost of testing of materials at site and laboratory as directed by the department) (I) With Bitumen emulsion CSS -1h (c) Granular surface treated with primer

Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5% of mix and filler transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the reqd. grade, lavel and alignment,rolling with smooth wheeled,vibratory and tandem rollers to achieve the desired compaction as per MoSRT&H cl. no.508. complete in all respect. including carriage of mixed materials up to 10.0 Km initial lead from mixing plant ) (Including cost of testing of materials at site and laboratory as directed by the deptt.) With hydrated lime/cement as filler ( refer table 500-9 of MoSRT&H specification) With 60/70 or VG-30 grade bitumen for GradingII(10 mm nominal size)

Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material.

Bedding for pipe (B) Type B( First Class) Bedding Laying(First Class) bedding on well compacted sand,moorum or approved granular material as per Clause 1105(ii) (ii) Granular Material

Plain Cement Concrete M10(1:3:6 nominal mix)in levelling course below open foundation of Head Walls as per drawings & Technical Specification Clause 1109

Brick masonry work in cement mortar in foundation of head walls complete as per drawing and Technical Specification Clause 1100 (A) Brick ,Masonry in 1:4 cement mortar

Providing and laying reinforced cement concrete pipe NP3 for culverts on fiurst class bedding of granular material in single row including fixing collar with cement mortar 1;2 but excluding excavation, protection works, backfilling, concrete and masonry works in head walls and parapets Clause 1106. (B)1000mm dia

Plastering with Cement mortar (1:4) 15 mm thick on brickwork in substructure as per Technical Specification

Providing and fixing of retro-reflectorised cautionary,mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting,1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 450 mmx 450 mmx 600 mm, 600 mm beow ground level as per drawings and Technical Specification Clause 801 (i) 900 mm equilateral triangle

Providing and erecting direction and place identification retro-reflectorised sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3, fixed over aluminium sheeting, 2 mm thick with area not exceeding 0.9 sqm supported on a mild steel single angle iron post 75 x 75 x 6 mm firmly fixed to the ground by means of properly designed foundation with M-15 grade cement concrete 450 x 450 x 600 mm, 600 mm below ground level as per approved drawing and Technical Specification Clause 1701

Providing hump type speed breaker With DBM

Providing hump type speed breaker With BC

Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area ,thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35.The finished surface to be level,uniform and free from streaks and holes and conforming to the MoSrt &H specifications.

Providing reflective pavement marker with Micro prismatic lens in both direction having thermoplastic body adhering to the specification and guidelines of MoSRT&H's fixed to the road surface using the adhesives and the procedures recommended by the manufacturers with three months replacement warranty and free maintenance.

Rajib Borah (BID ID -240809)