Loading…
India Infra Updates on WhatsApp
Join the Tenderkart WhatsApp channel for India Tender Updates
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹39.2 LAccepted-AOC P O WEST SRIPURIA DIST TINSUKIA ASSAM PIN 786 145 | TINSUKIA | ASSAM | 786145 | L1 | Accepted-AOC ACCEPTED | |
| 2 | L2₹40.0 L+₹77,095 (1.97%)Rejected-Finance NAU PUKHRI ROAD MILLAN PALLY BYE LANE 2 NEAR GOYAL PALACE PO DISTT TINSUKIA ASSAM 786125 | TINSUKIA | ASSAM | 786125 | L2 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 3 | L3₹45.9 L+₹6.7 L (17.2%)Rejected-Finance A 153 HQ CE EC KOLKATA LEKHAPANI POST TINSUKIA DIST ASSAM STATE | L3 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 4 | L4₹50.7 L+₹11.5 L (29.2%)Rejected-Finance AT MAIN ROAD DANDAI PO PS DANDAI DIST GARHWA | LATEHAR | JHARKHAND | 822112 | L4 | Rejected-Finance OTHER THAN LOWEST BIDDER | |
| 5 | Rejected-Technical 38 GROUND FLOOR RANI JHANSI ROAD JHANDEWALAN NEW DELHI CENTRAL DELHI DELHI 110055 | CENTRAL DELHI | DELHI | 110055 | - | Rejected-Technical NOT ADMITTED EMD NOT SUBMITTED |
Tender Value
₹43 L
EMD Value
₹86,000
Closing Date
30 Oct 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
COMMANDER WORKS ENGINEER, DINJAN
COMMANDER WORKS ENGINEER, DINJAN
PROVN OF BIO DEGRADABLE WASTE SHREDDING AND COMPOSTING MACHINE 1500KG CAPACITY AT LEKHAPANI MIL STN
2023_MES_620631_1
84227E8
Open Tender
Civil Works
Item Rate
150 days
GE LEKHAPANI
AS PER TENDER
8 documents required · 8 mandatory
₹500
GE LEKHAPANI
₹86,000
Yes
6 Jan 2024
26 Sept 2023
6 Nov 2023
26 Sept 2023
30 Oct 2023
18 Oct 2023
27 Sept 2023 - 7 Oct 2023
Amount
Supply installation and commissioning of automatic organic waste convertor machine(AOWC) of 1500 Kg, food waste shredder of capacity 200 kg/hr, dewatering system suitable to handle 200-300 Kg/hr and screw conveyor of 350 Kg/hr including accessories of following specifications:- A) The AOWC machine should be built as a heavy duty industrial grade automatic organic waste convertor.Fully automatic operation (Minimum manpower required) Approx volume : min 582 Cubic feet. Output : Soil additive by 24 hrs, Volume reduction : 80-85% Power rating : 20-22.0 KW, 3 phase, Voltage : 440/50 Hz, Outer body : MS powder coating The processing inner tank must be made of SS-304 material. The outer body is made up of Mild steel powder coated. Main motor of the AOWC machine is min 7.5 HP, exhaust blower motor is 1 HP. The machine should be easily accessible and can be opened from all the sides with a single key. AOWC machines should be provided with indirect heating system (Oil bath heating system). In case of heater failures the in built redundancy/ heaters must be supplied. The redundancy/slave heaters come on in case of the main heater failure, resulting in a better uptime Thermophilic and mesophilic bacteria must be developed in OEM certified NABL. Accredited Lab to enhance the decomposition process and quality of the soil enricher. The developed microbial cultures should be validated by any govt recognized institute and provide certificate for the same. Manufacturer should have certifications from NABL (National Accreditation Board for Testing and Calibration Laboratories) and ISO 9001-2015 and is verified by CRISL ( Credit rating information services of India Ltd ) B) FOOD WASTE SHREDDER- Type- Jaw type, Feed opening - Stainless steel SS 304 hopper, Blade type- Stainless steel, Motor- min 3 HP, Outer body- MS powder coated, Dimension minimum 3.5 ft (L) * 2 ft (W) * 3.5 ft (H) (±0.5ft), Safety feature-Overload protection and forward reverse function, No of shafts- Dual and Capacity- 200 Kg per hour. C) DEWATERER- Type -Screw press, Motor- min 3 HP with overload protection, Input- Motorized continuous feed type and water flow line, Feeding capacity- Suitable to handle 200-300 kg/hr, Input Moisture- 85% to 95%, Output moisture- Less than 35%, Outer body Feed box fabricated from M.S, Press casing -Conical design shape, Discharge control-C.I.M.O.C adjusting cone, Screw-Fabricated from S.S 304 MOC plate on M.S Shaft, Base frame-Fabricated from M.S. D) SCREW CONVEYOR- Motor- min 3 HP and Inclined type. Note- Copper wiring with PVC conduit of suitable size from LT panel to the machine shall be included in the rate quoted by the contractor. (ii) the following protection shall also be provided for protection of all electrical machineries (a) Single phase prevention, (b) Short Circuit protection, (c) Under/over voltage protection. (iii) installation and providing demo of machine by OEM rep. complete all as specified and as directed
Excavating in trenches not exceeding 1.5 m wide and not exceeding 1.5 m in depth; for foundation, etc. or for shafts, wells, cesspits, manholes, pier holes, etc. or for cable laying or water supply pipes lines etc or not exceeding 10 sqm on plan and not exceeding 1.5 m in depth and getting out in soft/ loose soil complete all as specified and as directed.
Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25 cm in soft/ loose/ hard/ dense soil complete all as specified and as directed.
Removing excavated material (soils) not exceeding 50 m and depositing where directed at a level n exc. 1.5 m above the starting point
Supply & spreading in trenches sand cushioning to underground cable in trenches including spreading, levelling hand punning down complete all as specified and directed Note:- Depth of sand cushioning will be measured after punning down and levelling the sand properly.
M & L for laying of bricks locally available sub class 'B' bricks (old size) for cable protection cover laid flat and dry in trenches over the cable perpendicular to the direction of cable all as directed.
M & L for boring under road, pavement, hard standing by trenchless technology using latest boring technique/ or by mechanical means for insertion of GI/CI/PP-R/PVC pipe/cable of any dia/ bore/size complete all as specified and as directed. Note- Pipes shall be measured and paid separtely.
Supplying & laying in trenches, in road cutting and along pole 40 mm nominal bore, light grade, galvanised coated steel tube conforming to IS 1239 (Part-1): 2004 including all fittings conforming to IS 1239 (Part-2): 2011 complete all as specified and as directed.
Supply and lay high density polyethylene pipe (HDPE) of pressure rating PN 6(0.6 Mpa), material grade PE 63 and nominal dia 40 mm including all fittings and fixtures in trenches complete all as specified and as directed.
Supply, laying, jointing, testing and commissioning cross-linked polyethylene (XLPE) insulated cable for working voltages of 1100 V, PVC sheathed, armoured, 3 core with reduced neutral conductors (3½ core), nominal cross sectional area of main conductor 50 sqmm, stranded aluminium conductor, ISI marked as per IS 7098(Part-I): 1988 including cable glands, lugs etc. to suit the cable size and to be laid in trenches, fixed along pole, under floors, through GI pipe laid under floors/roads, through concealed GI pipe along wall etc. complete all as specified and as directed.
M & L for earthing complete with galvanised steel plate earth electrode 600 mm X 600 mm X 6 mm thick, buried directly in ground (earth pit not less than 2.25 metres deep below ground level) with top edge of the plate not less than 1.5 metres below normal ground level, connected to earthing lead of 32 mm X 6 mm galvanised mild steel strip by means of bolts, nuts, check nuts and washers of galvanised iron from earth plate to test point upto 7.5 metre including all as shown in electrical plate No. 3 of SSR Part I (2009) including necessary concrete chamber in cement concrete M15 (Nominal Mix) using 20 mm nominal size coarse aggregate, precast RCC cover slab in cement concrete M15 (Nominal mix) using 20 mm nominal size coarse aggregate of size 40 cm X 40 cm X 5 cm reinforced with 8 mm dia TMT bars @ 150 mm c/c with one handle for lifting made out of 8 mm dia bar, GI funnel, GI wire mesh filter, 20 mm dia GI pipe medium grade for watering, 40 mm dia GI pipe medium grade for protection of earthing lead, charcoal or coke and salt in alternate layers including necessary excavation and earth work in any type of soil/ strata and testing complete all as specified and as directed by the Engineer-in-charge.
Surface excavation not exceeding 30 cm deep and averaging 15 cm deep and getting out in soft/ loose soil complete all as specified and as directed.
Excavating in post holes (or similar holes) each not exceeding 0.5 cum, getting out in soft/ loose soil, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm, watering and removing surplus soil to a distance not exceeding 50 m and making good surface complete all as specified and as directed.
M & L for cement concrete in foundation, filling and mass concrete in M7.5(Nominal Mix) using 40 mm nominal size graded crushed stone aggregate complete all as specified and as directed.
S & F for steel work of grade-3 as per IS 10748 in tubular trusses including special shaped washer etc. complete using ERW or HRIW welded tubes conforming to IS 1161: 2014 (Yst 240 Grade) complete all as specified and directed.
S & F hot rolled medium and high tensile structural steel of grade E 250 quality C conforming to IS 2062: 2011 as in plates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and as directed.
S & F hot rolled medium and high tensile structural steel of grade E165 as per IS 15911: 2010 as in framed work such as grills, grating, etc., with ends of bars of shouldered and/or riveted, or forged into spikes, framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework water tanks and similar work complete all as specified and directed by Engineer-in-charge.
M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated corrugated steel sheet, any pattern corresponding to IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in roof covering/ wall clading fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.
M & L for pre-painted hot-dip aluminium-zinc alloy metallic coated plain steel sheet as per IS 15965:2012 of durability class 3, atmospheric classification category 3, coating class AZ150, 0.50 mm thick, of an approved colour and having yield strength of 550 MPa as in ridge/ valley/ gutter fixed with self tapping screws as specified including necessary scaffolding and safety measures at any floor complete all as specified and as directed.
Preparation of newly or previously untreated steel surface of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and as directed by Engineer-in-Charge
M & L for cement concrete in foundation, filling and mass concrete in M10(Nominal Mix) using 40 mm nominal size graded crushed stone aggregate complete all as specified and as directed.
M & L for cement concrete in foundation, filling and mass concrete in M15(Nominal Mix) using 40 mm nominal size graded crushed stone aggregate complete all as specified and as directed.
M & L for brick work with sub class 'B' bricks, straight or curved on plan exceeding 6 m mean radius built in cement mortar 1:4 complete all as specified and as directed.
Material and labour for plastering 15 mm thick on fair faces of brick work or concrete surfaces (on vertical surfaces) in cement mortar 1:4 finished even and smooth without using extra cement mixing with WPC complete all as specified and as directed. Note- WPC shall be measured and paid separately.
M & L for preparation of newly plastered surface of wall and applying two coats cement base paint over one coat of primer complete all as specified and as directed.
MAA COMMUNICATION
M/s Singh enterprises
ms singh construction
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .