CERTAIN REPAIR TO ROOF SHEET, PLUMBING LINES, KITCHEN CABINETS, JOINERY AND MISC B/R REPAIR AT GEN ROAD, OFFRS ACCNS AND MAP AB ROAD ACCNS UNDER AGE B/R IV AT GE AWC.

Amount

M&L Water proofing treatment on "Non approachable / non accessible roof" surface (Horizontal & Vertical surfaces) in following sequence through authorized applicator of the manufacturer all as specified and directed complete including removal of existing treatment, complete all as specified and directed. (i) Surface prepration like opening the cracks/removal of loose concerete. (ii) Pressure washing the entire roof to remove dirt , dust alage fungi or other contaminants from joints and entire surface. (iii) Saturation of surface nano technology based deep penetrating sealer application to block pores , capillaries and micro cracks. (iv) Filling the crack with flexible polymer based caulk and further sealing with reinforcement fabric elastomeric coating. (v) Sealing joints and coving area with flexi reinforcement fabric and elastomeric coating. (vi) Priming coat of dr fixit URP (vii) First and Second coat of elastomeric dr fixit Roof Seal . The authorized applicators are under (i) P Tech Solutions 92 Anurag Nagar Ring Road indore (II) MR clean Ventures E-4/402 Arera Colony Bhopal 462016 (iii) Property care, 244 D scheme No 71 Near Shriji Vatika indore 452002 Note : A warranty of 10 years be provided by the contractor.

S&F 3 layer Rotational moulded poly-ethylene water storage tanks ( cylinderical vertical with closed top ) 500 litres capacity, hoisted and fixed in position including dismantling of PVC water tanks exc 250 ltr but not exc 500 ltr complete all as specified and directed.

S&F 3 layer Rotational moulded poly-ethylene water storage tanks ( cylinderical vertical with closed top ) 1000 litres capacity, hoisted and fixed in position including dismantling of PVC water tanks exc 500 ltr but not exc 1000 ltr, complete all as specified and directed.

S&F in repairs ball valves high pressure of PTMT with epoxy coated Aluminium rod & high-density plastic ball , suitable for 25 mm bore pipe, screwed for iron pipe and fixed, (Minimum weight 25mm-455 gms.) complete all as specified and directed.

Supplying, fixing, 15mm bore galvanised steel water tubing medium grade with all fittings fixed to walls and ceilings or laid in floors, including taking up or down existing 15 mm bore steel tubing and connection and removing, complete all as specified and directed.

Supplying, fixing, 20 mm bore galvanised steel water tubing medium grade with all fittings fixed to walls and ceilings or laid in floors, including taking up or down existing 20 mm bore steel tubing and connection and removing, complete all as specified and directed.

Supplying, fixing, 25 mm bore galvanised steel water tubing medium grade with all fittings fixed to walls and ceilings or laid in floors, including taking up or down existing 25 mm bore steel tubing and connection and removing, complete all as specified and directed.

M & L non skid ceramic coloured tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.11 sqm but not exc 0.18 sqm , in floors etc.set jointed in neat cement sluury and pointed in white or coloured cement to match over & incl 15 mm thick screed bed built in CM 1:6, including dismanling floor,hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M&L glazed ceramic coloured tiles size 300mm x 450 mm 6-7 mm thick (Colour and design of tiles as approved by GE) on vertical surfaces such as dado, skirting etc set and jointed in neat cement slurry and pointed in coloured cement to match over and including 10mm thick rendering in cement mortar 1:4, including dismanling floor,hearth or wall tiling including cement mortar bedding (but not backing),removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

M & L for vitrified cerameic tiles 9 to10mm thick light shade (square/rectangular ) digital designer polished, area of each tiles not exceeding 0.36 sqm in floor/skirting etc set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 20 mm thick screed in cement mortar 1:6, including dismanling floor,hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premises complete all as specified and directed.

S&F Solid PVC Wall Lining consisting of 5mm thick Plain colour PVC sheet/ 8 to 10 mm hollow inclusive of solvent cement and fixing at site on PVC frame as per specifications and drawing, including taking down of old board, complete all as specified and directed.

S&F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive of fixing on to wall to make PVC Frame as per specification and drawing.

S&F PVC waste pipe fixed to any type of coupling of 32 mm threaded complete all as specified and directed.

M&L Granite 20 mm thick(of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking plateforms and like including pointing in white cement(1:2) using marble dust with admixture of pigment to match with shade of granite over & incl 20 mm thick screed bed built in CM 1:4, including demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, complete all as specified and directed.

M&L Rounding to edges of stone slabs one edges, such as in steps, cooking platform, and other similar situations for bullnosing / moulding to exposed edges( any type) and polishing to match the adjoining surfaces complete all as specified & directed.

M & L 20 - 25 mm thick machine cut Kota stone slab in flooring or treads of steps over and including 15mm thick screed bed in cement mortar 1:6, laid and jointed with grey cement slurry mixed with pigment to match with shade of slab/rubbing, polishing etc, including demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, complete all as specified and directed. Note:- The size of Kota stone slab shall not less than 550 mm x 550 mm cut size, except the location where the balance portion remain less than size as specified above.

Description same as per Item No. 16.00 but as in vertical surfaces including 10 mm thick rendering in CM 1:4, complete all as specified and directed.

M&L Green marble 18 to 20 mm thick(of any type) work (table rubbed and polished) for wall lining (Veneering to wall) and laid on cill of parapet wall / floor / dado over 12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of marble colour as per direction of GE, including demolition of stone slabs and tiles of any description or thickness in floors, aprons etc laid, bedded and pointed in any mortar, complete all as specified and directed. Note : Cutting of marble are included in this rate.

Taking down shutters of any description exc 1.00 sqm and n.exc 2.00 sqm each incl removal from site, complete all as specified and directed.

Taking down chowkhats or frame exc 1.5 sqm but not exc 4 sqm with shutter (without taking off shutter from the frame), complete all as specified and directed.

Taking down chowkhats or frame not exc 1.5 sqm without taking off shutter from the frame, complete all as specified and directed.

M&L for PCC (1:3:6) type C-1 with using 20mm graded stone aggregate as in bed blocks, coping, for fixing holdfast/lugs,filling hollow space of pressed steel door frame etc including necessary form work all complete as specified and as directed.

M & L 2 nd class hard wood 35 mm thick Plain , framed panelled shutters ( any number of panels), with panels of timber flat on both sides (feather edged) or of veneered particle board medium density, wood particle board with commercial face veneers fitted to chowkats complete all as speciifed and directed.

S & F 2 nd class hard wood 35 mm thick Glazed and skeleton shutters, open rebated and prepared to receive glass , gauze, etc, (without sash bar) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass etc, sizes of members of shutters as specified in SSR Part-I, section 8, clause 8.24 (a) fitted to chowkats complete all as specified and directed. Note :- Glass pane and wire mesh shall be measured and paid separately in respective supply only item.

S & F factory made solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails. MS frame shall be covered with heat molded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width struck inside with solvent cement for stiles and plain colour PVC sheet for top rail, lock rail and bottom rail on either side and gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and jointed together with solvent cement complete all as shown in SSR Part – II 2020 and as directed by GE/Engineer-in-Charge.

S&F 35 mm thick factory made flush shutter, solid core construction with particle board core and ply wood face panels commecial type on both sides, complete all as specified and as directed.

S & F of 2nd class hard wood plain solid straight chow hats frames wrought, framed rebated on the solid rounded or chamfered put together with glue pinned at joints, complete all as specified and as directed.

Supply only Galvnised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm, complete all as specified and directed.

Supply only 3 mm thick (nominal) Sheet glass , ordinary quality , in squares, not exceeding 0.50 sqm each pane fixed with beads ( supplied with joinery ), complete all as specified and directed.

Taking down door/Window/ventilator wooden/steel shutter from frame exc 1 Sqm but not exc 2 Sqm each and refixing the shutter in the same opening after easing and adjusting, complete all as specified and directed.

Taking down door/Window/ventilator wooden/steel shutter from frame n exc 1 Sqm Sqm each and refixing the shutter in the same opening after easing and adjusting, complete all as specified and directed.

S & F factory made 100% solid WPC (Wood polymer composite) Door frame 90mm X 45mm (Moulded) single rebated made from wood polymer composite (single extruded process material comparison of virgin PVC polymer of k value 57-60 (Suspension grade), calcium carbonate and natural fibers (Wood powder/rice husk/wheat husk) and Non toxic additives fabricated with meter joints after applying PVC solvent cement & screwed with full body treaded star headed screws having minimum frame density of 750 kg/ cbm, an ISO 9001-2015 certified company , having good screw holding capacity (screw withdrawal strength of (Min 990 N ), minimum compressive strength of 58n/mm2, Modulus of elasticity 900N mm2 and resistance to spread of flame of class A category with property of being Termite/ borer proof , water/ moisture proof and fire retardant & fixed with position with SS dash fasteners / Hold fast of required dia and length , all as per specifications drawings as directed by the Engineer-In-charge ,Material test certificate and authentication should be compulsory provided by the manufacturing company including hold fast or fasteners, complete all as specified and as directed.

S & F factory made 25 mm thick 100% solid WPC (wood polymer composite) laminated flush door shutter of required size comprising of virgin PVC resin of K value 57-60 ( suspension grade), Calcium carbonate and natural fibers ( Wood powders / rice husk/wheat husk) and non toxic additives made from extension process WPC foam sheet single extruded (Inner) with having minimum density not less than 650 kg kg/cbm, an ISO 9001-2015 certified company , having good screw holding capacity (Screw withdrawal strength of 200 N (Face) & 1100 N (Edge) minimum compissive of 50N/mm2 Modulus of elasticity 850N/mm2 and resistance of spread of flame of class A category property of being Termite/ borer free , water/ moisture proof and fire retardant WPC to be laminated with PVC foil of minimum 14 microns thick of approved design pasted on both faces of shutter and fixing stainless steel butt hinges of required size with necessary full body threaded star headed counter sunk SS screws , all as per direction of Engineer-In-charge ,Material test certificate and authentication should be compulsory provided by the manufacturing company, complete all as specified and as directed.

S&F stainless steel round knob door cylindrical lock tubular lock silver matte finish doors with keys, complete all as specified and directed.

S & F 100 mm size butt hinges, extruded aluminium alloy with galvanised mild steel hinge pin, anodised and fixed, type B-21, complete all as specified and directed.

S & F aluminium 200 mm long anodised barrel tower bolts ISI marked of extruded section and fixed, complete all as specified and directed.

S & F aluminium 150 mm long anodised barrel tower bolts ISI marked of extruded section and fixed, complete all as specified and directed.

S & F 150 mm size aluminium handles cast type, anodised ISI marked, complete all as specified and directed.

S & F Brass 200 mm long anodised barrel tower bolts with cast or sheet barrel and rolled cast bolts and fixed, complete all as specified and directed.

S & F in repairBrass 150 mm long anodised barrel tower bolts with cast or sheet barrel and rolled cast bolts and fixed, complete all as specified and directed.

S & F in repair 150 mm size Brass handles cast type, anodisedwith cast or sheet barrel and rolled cast bolts and fixed, complete all as specified and directed.

S & F in repair 300 mm Brass , anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast brass and fixed, complete all as specified and directed.

S & F 250 mm aluminium alloy, anodised sliding door bolt ISI marked with hasp, staple (bolt type) and fixing clips of sheet, cast of extruded sections and fixing bolts and sliding bolts of extruded sec or cast aluminium and fixed, complete all as specified and directed.

S & F 300 mm mild steel, ordinary rat tail rod pattern spring including roller and roller plate complete fixed to steel frame / wooden frame including necessary welding, cutting, opening of wall for fixing bracket and making good, complete all as specified and directed.

S & F in repair powder coated aluminium door seal 30mm wide and length as per requirement of site including dust/insect arrestor complete all as specified and directed.

S & F Powder coated aluminium sliding glazed windows with three track shutter sliding (two shutters glazed and one shutter wire mesh) shall be two part as upper patr shall be three movable shutter and lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM 1: 3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge. (i) Windows frame of cross section 101mm x 44mm x 1.5mm thick. (Min) (ii) Three way track for sliding shutters of cross section 91.8mm x 31.75mm x1.1mm thick.(Min) (iii) Sliding shutter frame of cross section 40 x 18 x 1mm thick.(Min) (iv) 4 mm thick glass superior quality.(Min) (v) IDPE Rubber guasket for fixing of glass. (vi) Locking cleats per shutter -01 Nos.(Min) (vii) Sliding rollers per shutter - 02 Nos.(Min) (viii) Stainless steel wire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos. (Ix) fixing screw for frame with wall per windows- 08 Nos.

S & F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed.

S & F powder coated aluminum door with the following specification and making good the adjacent surfaces complete all as specified and as directed:- (a) Cross section of xchowkhat frame 101.60x44.45x2mm thick. (b) Cross section of hanging and meetng style 83x44x2mm thick. (c) Top rail of cross section 114x44x2mm thick. (d) Bottom rail of cross section 114x44x2mm thick. (e) Locking rail (middle rail ) of cross section 83x44x2mm thick. (f) 4mm thick tinted glass make Modi, float . (g) Aluminum handle eisc type -02 Nos per shutter ( inside & out side). (h) Aluminum door stopper heavy duty-01 Nos per shutter. (i) Aluminum tower bolt 200mm long-01 Nos per shutter (inside). (j) Lock with key superior quality makae and type as approved by GE openable both from inside & out side -01 Nos per shutter.

Dismantling timber scantlings unframed of any section , in any position complete all as specified and directed.

M&L mild steel framed work such as grills , gratings, etc., with ends of bars shouldered and/ or riveted, or forged in to spikes; framed guard bars ; barred iron doors; ladders; framed balusters ; walk ways ; railings; frame work of water tanks and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed.

M & L for preparation old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as sp & dir.

M & L Preparation of New wood or previously untreated surfaces of any description , not otherwise description, over 10 cm width or grith apply two coat of synthetic enemel paint (ordinary tint) over a coat of pink primer complete all as specifed and directed.

M & L for 3mm thick sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sq m in each pane, including hacking out of old glass from steel frame, complete all as specified and directed.

M & L for 3mm thick figured glass ordinary quality and glazing with oil putty in square not exc. 0.5 sq m in each pane, including hacking out of old glass from steel frame, complete all as specified and directed.

S&F in repair stainless steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, wooden beads or galvanised wire staples etc, complete all as specified and directed.

M&L brick work with Fly ash straight or curved on plan exc. 6 m mean radius built in cement mortar 1:6 including demolition of brick work built in cement mortar complete all as specified and directed.

M & L rendering 10 mm thick on brick wall/cement block wall or concrete surfaces in cement mortar 1:6, surfaces finished even and smooth without using extra cement complete, etc. all as specified and as directed.

M & L rendering 10 mm thick on brick wall/cement block wall or concrete surfaces in cement mortar 1:6, surfaces finished even and smooth without using extra cement complete including taking down cement plaster on brick or stone walls/ concrete surface, etc. all as specified and as directed.

M & L rendering 5 mm thick in cement mortar 1:3 on concrete surfaces as in ceiling surface finish even and smooth without using extra cement including taking down cement plaster on brick or stone walls/ concrete surface, etc. complete all as specified and directed..

M & L rendering 15 mm thick in cement mortar 1:4 in two layers, 10 mm thick plaster in first coat and second coat of 5 mm thick with WPC as per manufactures instruction, surfaces, surfaces finished even and smooth without using extra cement including taking down cement plaster on brick or stone walls / concrete surface etc, complete all as sp & dir. Note:- WPC will be measured and paid separately.

Supply only Integral water proofing compound complete all as specified and directed.

M&L for applying three coats of white washing on new plastered surfaces of ceiling including preparation complete all as specified and as directed.

M & L preparing old decorated plaster or un-plastered surfaces of ceiling and wall applying one coat of distemper complete all as specified and as directed.

Complete removal of old treatment on internal surfaces of wall by scrapping , and washing etc complete all as specified and directed.

M&L for applying 1 mm thick wall care putty on wall on internal old/new wall surfaces as per manufacturerer instruction complete all as specified and as directed.

M & L for applying two coats of oil bound distemper over a coat of primer on prepared wall putty surfaces of internal wall complete all as specified and as directed.

M & L for applying two coats of plastic emulsion over a coat of primer on prepared wall putty surfaces of internal wall complete all as specified and as directed.

M&L Two coats of exterior emulsion paint ( Apex ultima or weather coat) including 1 mm thick putty with primer , white or tinted on old / new surfaces of walls including prepration of old / new surfaces and washing floors, cleaning glass, joinery, electrical fittings, wiring etc, of drops and splashes complete all as specified and as directed.

S & F in repairs Sink with drainage board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes coupling , including bedding in cement mortar to dwarf wall or including fixing cantiliver brackets and connecting union to pipe overall size 915 mm x 460mm bowl size 410 mm x 330 x 160 mm complete all as specified and directed.

S & F in repairs vitreous china wash hand basin white, flat back of size 550mmx400mm fixed on and including cast iron cantilever bracket, 32mm dia brass waste coupling and 32 mm dia PVC waste pipe including fixing of tap, waste fitting etc complete.. Note :- Pillar tap shall be measured as supply only under respective item.

S&F in repair Table top of Counter table wash hand basins, vitreous china,of any size standerd size (flat back, or angle back type) including cutting for and pinning in ends of brackets or erecting stand inclusive of fixing of supply and waste pipe etc complete all as specified and directed.

S&F in repair 32 mm bore waste coupling with fittings, brass, chromium plated for galzed ware sinks, basins etc with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end compelete all as specified and directed.

S & F in repair Tall body tap piller cock 12" suitable for counter top WHB hot and cold water single lever basin mixer good quality with necessary coonection etc complete all as specified and as directed.

S & F in repair CP fancy type piller cock WHB hot and cold water single lever basin mixer good quality with necessary coonection etc complete all as specified and as directed.

S & F aluminium(extruded section) body door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed complete all as specified and as directed.

S&F in repair stainless steel kitchen plate rack made out of 1mm thick stainless steel of size 900 x 600 mm of best quality of approved make, complete all as specified and as directed.

S & F in repair vitreous china squatting pan “ORISSA PATERN” of size 580 mm x 440 mm, white, with integral foot rest (excluding flushing cistern and flush pipe) including connection to trap and to flushing pipe, anti syphonage pipe etc and making good to floor complete all as specified and as directed.

S & F in repairs Vitreous china wash down water closet pan (pedestal pattern), white including pedestrial pan and trap, including seat cover for pedestial pan and connecting to drain or outgoing pipe and to flushing pipe, antisyphonage pipe etc complete all as specified and directed.

S & F in repairs wall mounted (one piece) closet with including necessary fitting like anchor bolt seat cover and other connecting kits etc complete all as specified and directed.

Supply & fixed in repair 10 Ltr capacity (ISI Mark), PVC valveless, syphonic action type, flushing cistern, low level, white, with inlet, ball valve, float and handle including brackets with and including 32 mm dia PVC flush pipe complete all as specified and directed.

Supply only PVC connection pipe 15 mm dia 450 long with PTMT nut at both ends complete all as specified and as directed.

S & F in repair brass chromium plated angle cock 15 mm dia screwed for iron pipe or brass ferrule, complete all as specified and as directed.

S & F in repair over head shower with arm & flnge of chromium plated with or without swivel joints, any size, including fixing to 15mm dia steel pipe for required length or union, complete all as specified and as directed.

S&F 15mm dia Bib tap standard of PTMT any colour high pressure screwed for iron pipe and fixed and fixed, complete all as specified and as directed.

S&F 15mm dia Bib tap long body chromioum plated with crutch or butterfly handle sorewed down screwed for iron pipe or for brass ferrule and fixed, complete all as specified and as directed.

S & F CP Grating Doom 100 mm bore, complete all as specified and as directed.

S&F curtain rod,powder coated with fixing bracket, stops and complete fitment, complete all as specified and as directed.

S & F in repairs stainless steel wall mount case with soap holder & brush holder fixed to wall, complete all as specified and as directed.

S&F in repairs towel rail 600mm long 20mm dia brass chromium plated fixed with wooden gulties embedded in cement mortar (1:3) with MS screws etc, complete all as specified and as directed.

S&F in repairs corner glass shelf 5.5mm thick with aluminium bracket and railing as per sample, complete all as specified and as directed.

S & F Floor door stopper over all length 150mm of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor, complete all as specified and as directed.

S&F in repairs sheet glass shelf 5.5mm thick with aluminium bracket and railing 60cm long and width 12.5cm as per sample, complete all as specified and as directed.

S&F in repair health faucet with flexible pipe of one mtr length including wall hook for EWC, complete all as specified and as directed.

Supply only 15 mm pillar tap fancy type chromium plated with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

S & F in repair WHB mixer CP Fancy exclusive type crewed down high pressure with or without lettered ‘Hot’ or ‘Cold’ with long screwed shanks and fly nut, screwed for iron pipe 15 mm bore, complete all as specified and directed.

S&F in repairs brass CP toilet paper holder fancy type, complete all as specified and directed.

S & F Sink Mixer CP Fancy exclusive type as per direction by Engg-in-charge, complete all as specified and directed.

S & F in repair wall mixer CP Fancy exclusive type as per direction by Engg-in-charge, complete all as specified and directed.

S&F in repairs wall mixer 3 in 1 system with provision for both hand shower and overhead shower complete with 115 mm long bend pipe connecting legs and wall flange, complete all as specified and directed.

S&F PVC Mirror cabinet of size 0.45 x 0.30m with doorshutter , complete all as specified and directed.

M&L 600x600x4 mm thick HPSC oceanic pre primed self embossed textured designer board water, termite and fire resistant as in ceiling or wall panelling fixed with screws as per manufracture instructions, including dismantling of old board, complete all as specified and directed.

S&F 605X605mm Anodised aluminium snap grid frame work for false ceiling including Hangers 6 mm dia. G.I. (upto 1200mm length) adjusting level fixed to roof slabs by means of ceilling cleats made out of G.I. flat 40 x 3 mm size 60mm long and expansion hold fasteners 12.5mm dia. 40mm long, complete all as specified and directed.

S & F in repair PVC (SWR) nahani trap with grating having diameter of outlet 75 mm including joining to waste pipe with solvent cement, complete all as specified and directed.

S & F in repair 110 mm dia bore. PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor/ trenches, complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints,laid in floor/ trenches, complete all as specified and directed.

S & F in repair 110 mm dia bore. PVC (SWR) pipes single socketed in any length with rubber ring joints,fixed to walls, complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) pipes single socketed in any length with rubber ring joints, fixed to walls complete all as specified and directed.

S & F in repair 110 mm dia bore PVC (SWR) bends with acess door any radius with solvent rubber ring joints, fixed complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) bends with acess door any radius with solvent rubber ring joints, fixed complete all as specified and directed.

S & F in repair 110 mm dia bore PVC (SWR) junction single, single (T) equal or unequal with acess door with solvent rubber ring joints, fixed complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) junction single, single (T) equal or unequal with acess door with solvent rubber ring joints, fixed complete all as specified and directed.

S & F in repair 110 mm dia bore PVC (SWR) branch piece single (single Y) equal or unequal with rubber ring joints, fixed complete all as specified and directed.

S & F in repair 75mm dia bore PVC (SWR) branch piece single (single Y) equal or unequal with rubber ring joints, fixed complete all as specified and directed.

S & F in repair 110 mm dia bore PVC (SWR) vent cowl rubber ring joints, fixed complete all as specified and directed.

Supplying, fixing and laying in repair of 16mm bore of CPVC pipe SDR 11 & plain CPVC SDR 11 fittings in trenhes, complete all as specified and directed.

Supplying, fixing and laying in repair of 20mm bore of CPVC pipe SDR 11 & plain CPVC SDR 11 fittings in trenhes, complete all as specified and directed.

M & L cutting chases in brick wall for concealed water tubing, pinning in, making good of facings where required and pointing in cement mortar 1:3 to ends or edges etc, cutting not exceeding 10 cm width or girth, complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed.

M & L for preparation of new or previously untreated steel surfaces of any description over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer, complete all as specified and as directed.

S & F Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering, grill gate , doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (incl steel sheeting or other covering, also fastening and fixing, complete all as specified and directed.

S&F steel work in tubular trusses including special shaped washer etc complete using ERW or induction butt welded tubes conforming to IS 1161-1979 GDE ST 240, complete all as specified and directed.

S & F Joist channel, angle or tee, square or rectangular tubler sections fixed independently or as purlin, rafter or post incl cutting to dead length where required notching drilling firing riveting and/or welding or connecting with bolts and nuts providing and fitting angle cleats fish plates, gusset plates etc complete all as specified and directed (Fe-410-W (gde-E-250) quality A).

M & L mild steel, plain, fiber glass reinforced translucent sheet, black sheet 1mm thick in wall cladding, steel gates and similar work, cut to size, holes punched; including round headed screws, clout nails or rivets and fixed to wood or steel framing with plain 40 mm lap joints with riveted or welded seams, including bending or turning up, mitred angles, etc. as required, complete all as specified and directed.

M &L for Pre-painted galvalume aluminium zinc coating GI based plain/corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, and eves board fixed with self tapping screws as specified including dismantling of existing old sheets, complete all as specified and directed.

M & L Preparation of old painted wooden surfaces of any description not otherwise description over 10 cm width or grith and apply one coat of synthetic enamel, complete all as specified and directed.

M & L for repair to sunken floor by provide water proofing treatment to sunken floor surfaces of RCC slab by the following specifications as specified and directed :- (a) Provide PCC 1 : 1.5 : 3 type A with using 12.5mm graded stone aggregate in slope of average thickness 50mm on sunken floor slab mixed with and including integral water proofing compound manufactured by Dr FIXIT or equivalent as approved, finish the surface even & smooth without using extra cement. (b) Rendering 15mm thick in CM 1:3 mixed with & including integral water proofing compound on sunken floor and sides of (Vertical surface) sunken portion. (c) Applying surfaces of bituminous primer (conforming to IS-3384-1965) @ 0.40 Kg/Sqm complete. on complete sunken surfaces of floor & wall and provide necessary connections to soil/waste pipe from WC/ nahani trap etc including demolation of old sunken complete all as specified and as directed. (d) Applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat would be paid seperately.) (e) APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyster non wove fabric (wt. not less than 150 gms/sqm) land on primed surface by forced application complete all as specified and directed. Note : Floor Area shall be measured for payment.

Taking down Aluminium door shutter and refixing in same opening after resetting ,, resecuring or easing & adjusting including necessary bolts and nuts, securing rods ,clips washers etc, complete all as specified and directed.

S&F in repairs 18 mm thick factory made PVC sheet one side pre-laminated sheet kitchen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lapping bending for 0.5 mm thick PVC sheet lapping at all four edges using bonding tape etc complete including taking down all as per specified and directed by Engr-in-Charge manufacturers specification, complete all as specified and directed.

S & F in repair 30 mm width of flaps (when open) Continous (piano) hinges , mild steel, bright finish or electrogalvanised , complete all as specified and directed.

Demolition of cement concrete (un reinforced) in ground floor and paving n. exc. 15cm thickness below or above ground level, complete all as specified and directed.

M & L 60 mm thick Machine pressed precast concrete interlocking paver block fixing with grey cement and pigments of " I " shape or as approved by GE ,and any colour and size confirming to IS 15658-2006 of M-35 Grade set, laid over 25 mm (average) thick dust sand cushioning, filling of joints with sand & compaction using surface vibrator after filling of joints lain in any pattern as decided by Engineer-In-Charge including packing of sides by cement concrete finishing surfce even and smooth, including demoletion of old stone slab, complete all as specified and directed.

M & L 75 mm thick PCC 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base for pavement , path, floor etc, complete all as specified and directed.

M & L 25 mm thick PCC 1:2:4 type B-1 using 20 mm graded stone aggregate including finishing surface of concrete topping even and rough complete as in levelling work etc, complete all as specified and directed.

M & L precast cement concrete kerb stone with solid blocks, exc. 10 cm in width type B1 1:2:4 (20 mm graded aggregate) set in cement mortar 1:6 etc, complete all as specified and directed.

S & F in repairs 15 mm bore two way bib taps long body, chromium plated cast copper alloy long body , screwed down, screwed for iron pipe or for brass ferrule, complete all as specified and directed.

Cleaning and removing all scale and dirt and elgy using wire/jute from inside of RCC /PVC tanks and connected pipe removing to a distance of not less than 250 mtrs,washing the tank/ipe with bleaching powder solution and finally applying 2% potassium permangnate solution for disinfection,including marking with black/white paint on white/black base on tank "Tank cleaned on________Dt________" exc 250 litre & n.exc 500 litre complete all as specified and directed.

Cleaning and removing all scale and dirt and elgy using wire/jute from inside of RCC /PVC tanks and connected pipe removing to a distance of not less than 250 mtrs,washing the tank/ipe with bleaching powder solution and finally applying 2% potassium permangnate solution for disinfection,including marking with black/white paint on white/black base on tank "Tank cleaned on________Dt________" exc 500 litre & n.exc 1000 litre complete all as specified and directed.

M & L washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand : 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings complete all as specified and directed. Note:- 1. Payment for providing grooves shall be made separately. 2. Work to be executed up to 7 Story building height.

Forming square grooves in plaster n exc 12mm deep and n exc 15mm on face, complete all as specified and directed. Note: Work to be executed up to 7 Story building height.

S&F in repair toughned glass 12 mm thick as in hinged doors, partitions automatic doors, partition of wall and similar work including cutting to shape, drilling hole with necessary arrangements for fixing also included handles, hinges, support channel for fixing in any position, complete all as specified and directed.

Goyal Construction