REPAIR TO FIRING RANGE OBSTACLE COURSE TRAINING SHED CLOTH LINE POST HARDSTANDING PLATFORM AND OTHER CONNECETED WORKS AT INS CHILKA UNDER GE CHILKA

Amount

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

M&L 15mm thick rendering on brick or concrete surfaces in cement mortar 1:4, surface fininshed even and smooth without using extra cement complete all as specified and as directed.

M&L 10 mm thick rendering on brick or concrete surfaces in cement mortar 1:6, surface finished even and fair complete all as specified and as directed.

M&L for preparation of new plastered external wall surfaces of any description and including applying two coats of weather coat anti dust emulsion paint, exterior grade of approved shade over one coat of alkali guard anti efflorescence primer as per manufacturers instructions complete all as specified and as directed.

M&L for applying three coat of white wash on wall including preparation of newly plastered surfaces of wall complete all as specified and as directed.

M&L preparation of new plastered surfaces and applying two coats of oil emulsion distemper over one coat of alkali primer on walls over and including 1mm thick wall care putty complete all as specified and as directed.

Demolition of brickwork or stone/boulder masonry built in cement mortar or cement lime mortar including all quions, arches, pillars etc, but excluding ashlar facings, dressed stonework & precast concrete articles complete all as specified and as directed.

M&L for brick work with fly ash bricks, straight or curved on plain exceeding 6m means radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for walling of random rubble masonry, uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

M & L for walling of random rubble , uncoursed , well bonded bedded and solidly hearted , built in cm 1:6 except stone complete all as specified and as directed. Note :- Serviceable RR stones obtained from demolition shall be reused.

M&L 15 mm thick rendering in cement mortar 1:4 on stone masonry wall, surface finished even and fair complete all as specified and as directed

M&L for flush pointing to random rubble masonry uncoursed or brought upto courses in cement mortar 1:4 complete all as specified and directed.

Demolition of cement concrete not exceeding 15cm thick below or above ground level and removing the debris to a distance not exceeding 50m from site complete all as specified and as directed.

M&L 100 mm thick cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as sub base of hard standing/pathway complete all as specified and directed

M&L 75 mm thick cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in path/hardstanding , surface finished even and smooth without using extra cement complete all as specified and as directed.

S&F in repair 4 mm plain mild steel wire galvanised class 3 as in fencing or cloth line with PVC coated including straining and fixing to steel post and to straining bolts, including securing with and provision of galvanised iron tying wire or staples or steel pins etc including removing of old wire complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection, surface finished even and fair complete all as specified and as directed.

Dismantling of floor, hearth or wall tiling including cement mortar bedding (but not packing) removing of servicable tiles to store and rubbish off the premises complete all as specified

M&L for chequered cement concrete coloured tiles 30cmx30cmx 25mm thick set, jointed and pointed in neat cement slurry in floors/steps with grey cement and pigment over and including 15mm thick screed bed in cement mortar 1:4 complete all as specified and as directed.

M&L for coloured non skid ceramic tiles not less than 7 to 8 mm thick, area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed be in cement mortar 1:4 complete all as specified and as directed.

M&L for coloured glazed ceramic tiles in vertical surface 350mmx250mmx 6 to 7mm / 450mmx350x6to7mm thick, set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 10mm thick rendering in cement mortar 1:4 complete all as specified and as directed.

Dismantling structural steel work including doors, gates etc complete all as specified and as directed.

M&L for Framed work such as grills, gratings, with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars, ladders framed balusters, and similar work conforming to Fe-290 grade E-165 complete all as specified and as directed.

M&L of roof trusses (framed), trussed, purlins, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410- W(Gde-E-250) quality- B complete all as specified and directed

M&L applying two coat of synthetic enamel paint of approved shade over one coat of red oxide primer including prepration of new steel and iron surfaces of any description over 10cm in width or girth complete all as specified and as directed.

M&L for preparing old painted steel surfaces of any description over 10 cm girth and width and applying one coat of synthetic enamel paint complete all as specified.

Dismantling of Plain or corrugated roof sheeting,any gauge, thickness, including Nainital or similar pattern roof coverings complete all as specified and as directed

S&F pre -painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/ cladding to wall,fixed with self tapping screw complete all as specified and as directed.

S&F pre -painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall,fixed with self tapping screws complete all as specified and as directed.

S&F 2 mm thick colour fibre glass reinforced translucent corrugated sheeting with two corrugation side lap with coach screw and washer as in roof, wall etc complete all as specified and as directed.

Demolition of reinforced cement concrete of any description and in any position not otherwise specifically provided for(reinforcement cut as required to facilitate demolition) complete all as specified and as directed.

M&L precast reinforced cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in cover slab , set in cement mortar 1:4 including necessary use and waste of form work complete all as specified and as directed.

Use and waste fo formwork to faces of walls, retaining walls, abutments, parapets and staircase railing and similar work including attached pillasters, buttresses, etc vertical or to batter , rough finished surfaces of concrete flat complete all as specified and as directed.

M&Lreinforced cement concrete 1:1.5:3 type B-1 using 20 mm graded stone aggregate in walls, retaining walls, basement walls, ballast walls and the like any thickness above top of footings including attached pilasters and buttresses complete all as specified and as directed.

M&L Mild steel TMT bar 10mm dia and over cut to length bent to shape required including cranking bending spirally for hooping for column hooking end and binding with and including mild steel wire(annealed) not less than 0.9mm dia or securing with clip complete all as specified and as directed.

M&L for cutting and removing wild bushes/ vegetation by way of surface dressing around the firing range and depositing surplus soil/ rubbish to a distnace exceeding 100 M but not exceeding 500 M complete all as specified and as directed.

ODRA NIRMAN

D RAVICHANDRAN

SUBAL CHARAN PRADHAN

M/S JAGANNATH SASMAL