SPL REPAIR TO BLDG NO E-96 (OR LINE) AND P-159 (OR BATHROOM) AT 22 RAPID (S) ORD UNIT AND SIG REGT (AREN) UNDER AGE B/R-IV AND AGE E/M-II OF GE (S) MEERUT CANTT

Amount

Dismantling floor hearth or wall tilling including cement mortar bedding, removing rubbish off the premises for minor repairs to floor in patches complete all as specified and directed.

M&L Non Skid ceramic ( coloured tiles ) tiles 7 to 8 mm thick (squares/rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed

M & L for Screed bed or bedding layer of 15 mm thick in cement mortar 1:6, for laying floor finish complete all as specified and directed.

Material & labour for glazed coloured ceramic tiles of size 450x300x7-8mm thick, on vertical surfaces set and jointed in neat cement slurry and pointed in white/ coloured cement to match over & including rendering 10 mm thick in C M 1:4 complete all as specified & directed.

S&F as in repair vitreous china squatting pan Orissa pattern, size 580 x 440mm, white, with integral footrest, excluding flushing cistern & flush pipe fixed as in repair with ‘P’ or ‘S’ trap, including making good the disturbed surfaces and to match with existing surface complete all as specified and directed.

Supply and fixing as in repair PVC valve less syphonic action type flushing cistern low level white with PVC inlet ball valve, float and handle, 10 ltrs capacity and connection to pipes including 32mm dia PVC long bend for squat pattern etc , set with concrete and making good to floor complete all as specified and directed.

S&F in repairs PVC connections 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S&F in repairs Bib taps 15 mm, chromium plated, cast copper alloy with crtuch or butterfly handle,screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.

S&F in repairs CP Soap dish, approximate size 100x 70x1mm thick complete all as specified and directed.

S&F in repairs sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and directed.

S&F in repairs corner glass shelf assembly consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed.

S&F in repairs fancy type 15 mm Angle stop valve, cast copper alloy with handle, chromium plated with crutch or butterfly handle, screwed down,Screwed for iron pipe of 15 mm bore pipe, complete all as specified and directed.

S&F as in repair 15 mm fancy type consealed stop valve, chromium plated, cast copper alloy, high pressure with handle, screwed end for iron pipe or for union and fixed, complete all as specified and directed.

S&F in repairs PVC waste pipe 32/40 mm bore as WHB/Sink etc complete all as specified and directed.

S&F as in repair 75 mm PVC (SWR) floor trap, plain with SS grating including jointing with solvent cement 75 mm bore, including jointing to waste pipe set in cement concrete type B-1(1:2:4) in repairs, complete all as specified and directed.

S & F in repairs brass chromium plated shower rose 125mm size with or without swivel joints, including fixing to steel pipe or union including shower arm etc complete all as specified and directed.

S&F in reipair CP towel rail brass 20mm dia 600mm long with bracket CP finish complete all as specified and directed.

Taking down cement plaster from brick walls or concrete surfaces including raking out joints, hacking out for key, scrubbing down with water complete all as specified and directed and removing rubbish etc. complete all as specified and directed.

M&L rendering 15mm thick in cement mortar (1:6) in patchy on fair faces of brick work or concrete surfaces finished even and fair on Internal walls , complete all as specified and directed.

M&L for preparation of newly plastered surface of wall etc and applying wall putty and two coat of oil bound distemper (OBD) over one coat of primer complete all as specified and directed.

M & L 15 mm thick rendering in CM 1:4 on fair faces of brick or concrete surfaces finished even and smooth with out using extra cement complete all as specified & directed.

M&L Preparing newly plaster surfaces & applying two coats of cement base paint complete all as specified and directed.

M&L Rendering 10 mm thick on fair faces of concrete surfaces, finished even and smooth on ceiling in cement mortar (1:3), complete all as specified and directed.

M&L three coats of white washing on new ceiling/chajja surfaces including preparation of surface complete all as specified and directed.

M&L for complete removal of existing treatment and finishing of wall surface by using wall care putty and applying two coats of oil bound distemper (OBD) over a coat of primer in any colour complete all as specified and directed.

M& L preparing plastered old surfaces on ceiling and applying two coats of white wash on ceiling surface complete all as specified and directed.

M&L for preparation of Old surfaces and apply two coat of cement base paint to walls complete all as specified and directed.

Taking up or down steel tubing 15 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Taking up or down steel tubing 20 mm bore and connections, including cleaning for re-fixing or removal to store complete all as specified and directed.

Cutting chases, pinning in, making good to facings where required and pointing in CM (1:3) and cutting chases for concealed water tubing etc, and making good, cutting not exc 10cm girth in brick wall complete all as specified and directed.

Supplying and laying of CPVC 20mm outer dia pipes (concealed) SDR 11 & Plain CPVC SDR 11, with all fittings (including brass fittings/fixtures) and fixed on walls/ceiling (concealed) or laying in floors complete all as specified and directed.

Supplying and laying of CPVC 25mm outer dia pipes SDR 11 & Plain CPVC SDR 11, with all fittings and fixed on walls/ceiling or laying in floors complete all as specified and directed.

Demolition & breaking of PVC/salt glazed rain water or sewage pie 75/100mm dia set in cement mortar & removing from site completed all as specified & directed.

Supply and fix 75mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls etc. as in waste complete all as specified & directed including taking down existing pipe.

Supply and fix 110mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to walls etc. as in waste and rain water pipes complete all as specified & directed including taking down existing pipe.

Supply and fix 110mm bore PVC Pipes single socketed in any length with rubber ring joints, fixed to floor etc. as in waste and rain water pipes complete all as specified & directed including taking down existing pipe.

S & F stack clamps out of 50 mm by 5 mm flat iron and 16 mm dia round iron stays including bolts and nuts and securing ends of stays to wall or roof complete all as specified and directed.

S&F PVC (SWR) bends any radius 75mm dia complete all as specified and directed.

S&F PVC (SWR) bends any radius 110mm dia complete all as specified and directed.

S&F PVC (SWR), junction single, (Single T) equal or unequal 75mm dia complete all as specified and directed.

S&F PVC (SWR), junction single, (Single T) equal or unequal 110mm dia complete all as specified and directed.

Taking down existing water proofing treatment from top of RCC/arch slab, including PCC Padding or plaster or brick bats and hacking the top of RCC slab, cleaning with water and disposal of rubbish off the premises complete all as spefied and directed.

M& L for PCC padding 1:2:4 type B1(using 20 mm graded stone aggregate) average thickness 25mm,finished fair and even without using extra cement on roof surfaces complete all as specified and directed.

Material and Labour for 10mm thick cement paster in CM 1:4 mixed with WPC as per the manufacturers instructions finised even and smooth without using extra cement on roof surface when concreate is green and wall (WPC will be measured and paid seperately as supply only rate) complete all as specified and directed.

Material & labour for cleaning of concrete surfaces and applying priming coat using with bituminous primer @ 0.30kg per Sqm followed by evenly a track coat @ 1.20 kg per Sqm using with 85/25 grade industrial bitumen , over it laid with 3mm thick APP modified polymeric water proofing membrane with non-woven polyester reinforced of weight not less than 3 kg per Sqm unrolled & bonded to substrate with side and end laps 75mm & 100mm as per manufacturer’s instruction and applying over it a tack coat using with 85/25 grade industrial bitumen @ 1.20 kg per Sqm and finally finished the top of polymeric water proofing membrane with a coat of bituminous aluminum paint @ 0.200 kg per Sqm as per manufacturer’s instructions complete all as specified and directed.

Supply only integral water proofing compound complete all as specified and directed.

M&L 75mm thick PCC 1:3:6 type C-1 (using 20mm graded stone aggregate) as in path /plinth protection , finish even & smooth without using extra cement complete all as specified and directed.

Demolition of cement concrete in ground floors and saving n.exc. 15 cm thick (below or above ground level) complete all as specified and directed .

S&F Solid PVC Door frame of size 50mm x 47mm made out of 5mm PVC sheet reinforced suitable for solid PVC door suppling & fixing in opening, complete all as specified and directed.

S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails, M.S. frame shall be covered with heat moulded plain colour PVC `C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles & plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S frame welded/ sealed to the stiles, & rails with suitable PVC sheet beading, & joined together with solvent cement, in the frame at site as per specification & drawing.

S&F Stainless steel butt hinges 100mm in size complete all as specified and directed.

S&F steel ventilators fixed type with glazing bars complete all as specified and directed.

Taking down chowkhats or frame exceeding 1.5 Sq. m but not exceeding 4 Sq. m each with shutters without taking off shutters from the frame, complete all as specified and directed.

Taking down chowkhats or frame not exceeding 1.5 Sq. m each with shutters without taking off shutters from the frame complete all as specified and directed.

S&F factory made pressed steel frames, conforming to IS, having profile 125 mm x 60 mm for doors with one or more rebates made out of 1.25 mm thick mild steel sheet, including necessary fixing lugs, butt hinges, lock strike plate, etc, complete, as specified, supplied and fixed complete all as specified and directed.

S&F for flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides, 30 mm thick, ISI marked, complete all as specified and directed.

M&L for gauzed shutter made out of box section with outer and locked frame of size 60mmx35mm (medium grade). The shutter shall be of pressed steel including fixing of 10 mm Square gaurd Bars (06 Nos in Horizontal dire4ctions & 05 Nos in Verical direction complete with fly proof wire mash having 0.63mm nominal dia wire and 1.40mm average width of aperture including two coats of synthetic enamel paint over a coat of red oxide primer including one sliding door bolt , handle and tower bolt complete all as specified and directed.

S&F Aluminium, anodized barrel tower bolts of extruded section and fixed, 200 mm long, dia of bolt not less than 10 mm, ISI marked, complete all as specified and directed.

S&F aluminium anodized handle of size 200 mm, ISI marked, complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt 250mm size with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy and fixed ISI marked complete all as specified and directed.

Material & labour for preparation of new or previously untreated wooden surfaces of any description, not otherwise described over 10cm width or girth and apply two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed .

M&L PCC 1:3:6 type C-1 (using 20mm greded stone agg) for hold fast and backfilling pressed steel frame etc complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 15 mm dia complete all as specified and directed.

S&F in repair Gun metal globe or gate valves with Iron wheel head screwed both ends for iron pipe 20 mm dia complete all as specified and directed.

Supply & fix in repair wall mixer with crutch brass chromium plated for mixing hot and cold water screwed for iron pipe suitable for 15mm bore pipes with with crutch (Provision for hand shower wherever neccessary) complete all as specified and directed.

Supply & fixing in rotational moulded polyethylene water storage tanks 500 liters capacity three layered, (cylindrical, vertical in closed top) hoisted and fixed in position with all fittings all as specified including 20 mm PVC ball valve including dismantling existing water tanks complete all as specified & directed.

S&F in repair 15 mm dia brass chromium plated central hole wash basin mixture, fancy type with or without lettered 'Hot' or 'Cold' ,with long screwed shanks and fly nut capstanhead screwed for 15mm dia pipe fixed in repair complete all as specified and directed.

Material & labour for preparation of new or previously untreated steel surface of any description over 10cm width or girth and applying two coat of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply & fix galvanized mild steel wire cloth with 0.56 mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanized wire staples complete all as specified & directed.

Supply & fix 3mm thick sheet glass, pin headed, and glazing with oil putty/beading in square not exceeding 0.50sqm each pane complete all as specified & directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed.

Returing and filling in layers nexc 25 cm incl watering and well running complete all as specified and directed.

Removal of surplus spoil upto a distance n. exc 50 meter complete all as specified and directed.

M&L Concrete bed to drain pipes 150mm, including packing under, and haunching against the sides of pipes after they are laid and tested; in PCC(1:4:8) Type D-2. complete all as specified and directed.

M&L 150mm dia Salt - glazed stoneware drain pipes laid in trenches and jointed as specified internal diiameter of pipe 150mm including demolition, removal from site upto 3.0 Km as directed by engg in charge and breaking up drain pipe ( salt glazed stone ware) complete all as specified and directed.

M&L Cement concrete in foundations, filling and mass-concrete in PCC 1:4:8 Type D-2 (using 40 mm graded stone aggregate) complete all as specified and directed.

Material & labour brick work with fly ash bricks in CM 1;6 brick straight or curved on plain exeeding 6m mean radius complete all as specified and directed.

M&L Rendring 10mm thick on fair faces of brick work or concrete surfaces in CM 1:4 complete all as specified and directed.

M&L PCC(1:3:6) type C1 as in benching to man hole complete all as specified and directed.

Surface dressing n exc 15 cm deep incl site clearance in soft/ loose soil complete all as specified and directed.

M&L for laying 60 mm thick machine pressed precast PCC coloured interlocking paver block moulded in PVC frame / mould any shape and size conforming to IS 15658-2006 of M-35 grade of approved design with gray cement and pigment to match shade / colour / matrix of tiles set and bedded over 25mm thick fine river washed sand duly compacted with surface vibrator laid over compacted sub soil in flooring complete all as specified and directed. Note :- Sand cushioning shall be measured and paid separetely.

M&L Sand for cushioning, interlocking tiles joint to be filled with sand, including spreading and levelling in layers n exc 25 mm thick Complete all as specified and directed.

M&L 75 mm thick cement concrete 1:3:6 type C-2 using (40 mm graded stone agg) as in sub base

S&F Pre-cast cement concrete block masonry 1:2:4 Type B-1 (using 20mm graded stone aggregates) with solid blocks, exc. 10 cm in width and setting in cement mortar 1:6, complete all as specified and directed.

Demolition of brick work or stone/boulder masonary built in cement mortar incl all quoins arches pillars etc complete all as specified and directed.

M&L brick work with sub class B Bricks old Size straight or curved on plan exc 6 m mean radis built in CM 1:6 complete all as specified and directed.

M&L brickwork with subclass `B' bricks, straight or curved on plan exc 6m mean radius, built in CM 1:6 except bricks complete all as specified and directed.

Dismantling timber scantlings 40 sq. cm and over in section as in framed work, in any position as in roof truss and Purlins complete all as specified and directed by Engr-in-charge.

S&F Roof trusses (framed), trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle channel or flat sections) including distance pieces, cleats et conforming to I. S 1161-1979 grade St.-240 complete all as specified and directed.

Dismantling asbestos cement (corrugated or semi corrugated ) sheets in roof covering complete all as specified and directed.

Supply and fix Pre-painted galvatume aluminium zinc coating GI based corrugated steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified.

Supply and fix Pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.5mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall,fixed with self tapping screws as specified and directed.

S&F Mild steel flat iron as in wind ties including cutting drilling holes and securing bolts confirming to FE 410-0 of 310-0 complete all as Specified and Directed.

Dismantling ceiling board of insulation boards etc any thickness complete all as specified and directed.

Material & labour for provision of Powder Coated GI frame work(snap grid) suitable for size as in false ceiling of size 600mmx600mm consisting of followings and all as directed:-i) sections incorporated in frame work shall conform to designation 63400 given in IS: 737-1986. ii) The snap grid shall consist of GI powder coated main /cross tee of size 36.5mmx25mmx1.4mm thick and 25mm x 25m x1.4mm thick, respectively. iii) Snap grid frame shall be fixed to ceiling with supporting hangers consisting of S & F 2mm dia mild steel GI wire. iv) The main and cross tees shall be jointed at junction/crossings with GI powder coated angle bracket, of size 15mmx15mmx1.4mm thick, fixed with suitable mild steel, bolts, nuts and washers all as per manufacturer’s instructions. v) The snap grid (main/cross tee section) shall be supported at ends all along the wall with GI powder coated angle of size 25mmx25mmx1.4 mm anodized thick. vi) Size of the snap grid shall be 605mm by 605mm. vii) Minimum average thickness of powder coating shall be 50 micron.

S&F 4 mm thick Gypsum Board in ceiling size 60cm x 60cm fixed to aluminium snap gird complete as per manufcturer"s instructions complete all as specified and directed.

S&F Vitrified coloured tiles size 600mm x 600mm, 8 to 10mm thickness, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement over & including 15mm screed bed in CM 1:6 complete all as specified and directed.

S&F Vitrified Ceramic tiles 7 to 8 mm thick (square/ rectangular) polished, area of each tiles exceeding 0.18 Sqm but not exceeding 0.36 sqm, as in skirting/dado etc. set and jointed in neat cement slurry and pointed in white or coloured cement over & including 15mm screed bed in CM 1:4 complete all as specified and directed.

Material & Labour For Powder coated anodised aluminium Door Shutter without sash bar, aluminium section weighing 0.55 kg/Mtr (minimum) including necessary joining cleats, 02 No's Handles, Locking Arrangement , Glazing clips, rubber packing anodised aluminum snap beading, screws suitable anodised aluminium frame with one or more rebates including supply and fix 5 to 6 mm thick black glass all and aluminium grill fixed to frame complete all as specified and directed

S&F powder coated anodised aluminium windows sliding type (3 shutter type)/ Side hung type as per site requirement or directed by engr-in-charge with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, with one or more rebates including S&F 5.50 mm thick black glass complete all as specified and directed.

S&F powder coated anodised aluminium Ventilators Side/top hung type as per site requirement or directed by engr-in-charge with sash bars, aluminium sections weighing 0.55 Kg/mtr (minimum) incl stainless steel mosquito proofing wire mesh fixed with , clips, frame , necessary joining cleats, glazing clips, neoprene rubber gasket with aluminium beading screws suitable anodised fittings such as hinges, handles including powder coated anodised aluminium frame, with one or more rebates including S&F 5.50 mm thick black glass complete all as specified and directed.

M&L Framed work such as grills, angle grating etc. with ends of bars shouldered and or riveted or forged into spikes, framed guard bars, railings and similar work confirming to Fe-290 Gde-165 complete all as specified and directed.

M & L Preparation of new plastered surface of wall by applying 2mm thick wall care putty and making the surface smooth Finishing walls and applying Acrylic Smooth exterior paint of required shade (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) using roller for painting complete all as specified & directed.

M& L Preparation of Complete removal of existing treatment by mechanical means plastered old surface of wall and applying 2mm thick wall care putty over one coat of primer and making the surface smooth and applying two coat of Acrylic smooth exterior paint of required shade ( two coat @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2020 kg/10sqm) using roller for painting complete all as specified & directed.

M&L for red stone tiles of thickness not less than 20mm thick machine cut, bedded and jointed with grey cement slurry and pointed with white cement with admixure of pigment to match the shade of granite stone including cutting and polishing types including Screed bed or bedding layer of mortar 15 mm thick in C M 1:6, for laying floor finish Complete including dismantling of old existing floor complete all as specified an directed.

Material & labour for hardcore of broken bricks gauges n.exc. 63mm, deposited spread and leveled in layers n.exc. 15 cm thick watered and rammed to a true surface complete all as specified and directed.

Taking down carefully any type of battens or conduit point wiring with conduit (light, fan, socket or power) complete including fittings and fixtures such as switches, sockets, ceiling roses, lamp holders, pendent light fittings, MCBs / isolators, fan regulators, tube light fittings etc removing material from site and making good disturbed surfaces of walls, ceilings etc including two coats of white / colour washing / distempering etc to match the existing complete all as specified and directed.

Material and labour for point wiring with 1.5 Sq.mm nominal cross sectional area, single core, 1100 Volts grade, stranded, FRLS PVC insulated, unsheathed, copper conductor cable in and including new PVC concealed conduit of any size/dia complete with all accessories/fittings, brass screws, washer etc, sunk zinc coated pressed steel terminal boxes with 3mm thick plastic laminated sheet top cover concealed in wall with and including continuous earth wire of size 1.5 Sqmm nominal cross sectional area, single core, PVC insulated stranded copper conductor cable, unsheathed and connected to common earth and earth duly complete all as specified and directed for One light point controlled by one, one way switch 05 / 06 Amps.

All as item No 109.00 here-in-before but one fan point controlled by one, one way switch 05 / 06 Amps.

All as item No 109.00 here-in-before but one 3 pin, 05 / 06 Amps socket outlet point on independent board controlled by one, one way 05 / 06 Amps switch.

All as item No 109.00 here-in-before but one 3 pin, 05 / 06 Amps socket outlet point on same board controlled by one, one way 05 / 06 Amps switch.

All as item No 109.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 5 / 6 Amps socket outlet point on independent board.

All as item No 109.00 here-in-before but with 2.5 Sqmm nominal cross sectional area copper conductor cable for one 15 / 16 Amps socket outlet point on independent board.

Supply and fix in repair switch piano flush type, 05 / 06 Amps single pole, one way 240 volts complete all as specified & directed.

Supply and fix in repair socket outlet 5 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed.

Supply & fixing of socket outlet 3 pin, 05 / 06 Amps flush type 240 volts complete all as specified & directed.

Supply & fixing of socket outlet 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed.

Supply & fixing of socket outlet 3 pin, 05 / 06 Amps and 3 pin 15 / 16 Amps (2 in 1 Multipurpose) 240 volts complete all as specified & directed.

Supply and fix in repair switch piano flush type, 15 / 16 Amps single pole, one way 240 volts complete all as specified & directed.

Supply & fixing lamp holder (Angular / Straight), insulated body, with back plate for batten including LED bulb 9 Watt fitting complete all as specified & directed.

Supply and fixing decorative LED tube light fitting/warm as directed 1x20 watt surface mounting , intigrated with opal diffuser complete with all acessories complete all as specified & directed.

Material and labour for sub main wiring with 2x6 Sqmm nominal cross sectional area (two single core cable of 6 Sqmm for Phase and neutral + o1 single core cable of 6.0 Sqmm for earth wire), 1100 Volts grade, stranded, PVC insulated, unsheathed, copper conductor cable with and including continuous earth wire of size 6.0 Sqmm nominal cross sectional area, single core, PVC insulated, copper conductor cable drawing into and including rigid non metallic PVC concealed conduit of 25 mm dia, medium grade with all conduit accessories / fittings, brass screws, washers etc and connected to common earth dully including all cutting / chases etc in wall, making good to walls etc including two coats of white / colour washing / distempering etc to the disturbed surfaces to match the existing and taking down the old unserviceable submain wiring of ant type complete all as specified & directed. Note - One meter of conduit along with 2x6.0 Sqmm wire and one 6.0 sqmm earth wire shall be measured as one length).

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8 way, with 200 Amps rated copper bus bar and IP - 43 protection with metal double door and flush to wall including all cutting / chases on wall and making good including two coats of white/colour washing/distempering etc to match the existing disturbed surfaces and taking down the old distribution board of any type complete all as specified & directed.

Supply and fixing Vertical Loadline sheet metal enclosure double door, Triple pole and neutral (TP&N vertical loadline) AC, 415 volts, 04 way, with 100 Amps rated copper bus bar and IP - 43 & IK 09 protection, with the inbuilt provison for fixing of 1 No MCCB of XT1160 frame suitable upto 160 Amp and 12 Nos MCB'S inside of DB, including 100 Amps ,18 KA 4 pole MCCB with metal door and flush to wall including grouting and cutting in existing wall and making good disturbed surface with two coats of white / colour washing / distempering etc to match the existing one complete all as specified & directed.

Supply and fixing MCB, SP, AC, 240 volts "B" series capacity of 06 to 32 Amps, 10kA and making connections complete all as specified & directed.

Supply & fixing MCB, DP (Double Pole), AC, 240 volts, B series capacity 40 Amps to 63 Amps 10kA and making connections complete all as specified & directed.

Supply and fixing in replacement ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor (BLDC). Old unsv fan will be deposited to AGE E/M-II (South) yard only.

Taking down unsv cable of any type/size and S&F (in repair) , laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 35 Sqmm 3.5 core armoured, PVC sheathed with aluminium conductor heavy duty laid in trenches, fixing on wall, under road crossing through protection pipe etc complete all as specified and directed.

M&L for washed river dry sand cushioning in trenches 80mm thick before laying the cable and 150mm thick after laying the cable including spreading levelling andhard punning complete all as specified & directed.

Material and labour for contineous brick edging with width equal to the depth of the brick of whole sub class 'B' bricks laid on edge complete all as specified and directed.

Supply and fixing in repair LED security light fitting 1x35 Watt luminaries with die cast aluminium housing IP-66 comprising epoxy powder coated enclosed with glass coverembedded lens in frame with high power LED white lamp type of capacity 45 watt complete all as specified and directed.

Supply and fixing in repair LED security light fitting 1x35 Watt luminaries with die cast aluminium housing comprising epoxy powder coated enclosed with glass in frame with high power LED white lamp type of capacity 35 watt including making connections complete with bracket fitting made out of GI pipe medium grade including clampsand nuts and bolts complete all as specified and directed.

Supply & fixing of ceiling rose, 3 terminal /PVC/polycarbonate isolated body complete all as specified & directed.

Material & labour for earthing complete with galvanised mild steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25mtr deep below ground level) with top edge of the plate not less than 1.5mtr below normal ground level steel earth plate connected with GI wire 04mm dia by means of lug, bolts, nuts, check nuts, washers of galvanised iron or steel GI protection pipe 15mm bore light grade all as shown in elect plate No.5 of SSR part I connecting to main switch board / Main DB’s including excavation, earth work, salt and charcoal dust mixed and packed 150mm thick around GI earth plate, GI pipe medium grade 20mm nominal bore watering pipe GI sheet funnel wire mesh, concrete pit, RCC cover in PCC 1:2:4 type B1 duly reinforced with MS Bars 6mm dia at the rate of 150mm center to center both way with suitable lifting handle and pit / chamber in PCC 1:3:6 type C1 , Angle iron 40x40x5mm frame for pit cover including testing on completion complete all as specified and directed. Note- After completion of work if desired test result is not obtained the earthing to be redone with out any extra cost of department .

Supply and fix decorative LED Batten 20 Watt polycarbonate housing integtrated type complete with all accessories and fixing material complete all as specified & directed.

S&F exhaust fan steel body AC single phase 230 V of size 300mm sweep with blade frame and lauvers complete all as specified & directed.

Supply and fixing sheet metal enclosure double door, single pole and neutral, AC, 240 volts, 8way, with 100 Amps rated complete all as specified & directed.

Supply & fixing MCB SPN, AC, 240 volts of 32 to 63 Amps, C curve, 10 kA, complete all as specified & directed.

Supply, laying commissioning, testing of XLPE under ground LT cable 1100 volts grade of size 16 Sqmm 3.0 core armoured, PVC sheathed with aluminium conductor heavy duty complete all as specified & directed.

Supply / laying and fixing 40mm bore galvanised steel tubes with all fittings, light grade, laid in trenches for cable protection complete all as specified & directed.

Supply & fixing industrial type SPN enclosure with a two pin and earth plug and socket complete with and including 32 Amps MCB, single pole, AC, 240 volts complete all as specified & directed.

AR Enterprises (BID ID -3483082)

CHAUDHARY FURNITURE HOUSE (BID ID -3485974)

A.V. ASSOCIATES (BID ID -3487293)