Loading…
Loading…
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance | Admitted-Finance |
| 2 | Admitted-Finance | Admitted-Finance |
| 3 | Admitted-Finance | Admitted-Finance |
| 4 | Rejected-Technical | Rejected-Technical REJECT |
Tender Value
₹11.5 L
EMD Value
₹12,000
Closing Date
21 May 2020, 5:00 pmClosed
se ewc gonda
ewc gonda
Construction of 33 KV Lines (02 Nos.) from 132 KV Sub-Station Itiyathok, distt. Gonda and upto existing 33 KV Khargupur line, to facilitate supply form separate bay to existing 33/11 KV sub-stations Khargupur and Itiyathok.
2020_MVVNL_469311_1
nvs_01/ews(g)/2020-21
Open Tender
Electrical Works
Item Rate
90 days
gonda
Please refer Tender documents.
3 documents required · 3 mandatory
₹3,540
executive engineer ewd gonda
₹12,000
Yes
2 Jun 2020
14 May 2020
22 May 2020
14 May 2020
21 May 2020
14 May 2020
Amount
Safe Loading carriage including unloading & proper stacking of following store materials from ESC Gonda/JE store to site of work. (20 Km Approx)
ST Pole 11 Mtr. Long
33 KV Pin Insulator
11 KV Disc Insulator B & S Type
33 KV "V" Type channel X-arm
M.S. Earthing Rod 20x2500 mm
M.S. Top Channel 125x65x3200 mm
Bracing Angle
ACSR Dog Conductor
33 KV XLPE Cable 3x300 Sqmm
33 KV Cable Jointing Kit Suitable for 3x300mm sq. XLPE Cable O/D Type.
33 KV Straight Through Cable Jointing Kit Suitable for 3x300mm sq. XLPE Cable.
Errection of Single Pole support
The excavation of foundation pit of size (750x450) mm and having depth of 1/6 of the full length of the support. Errection of support, complete with providing & Fixing of all clamps and other accessories as per drawing. The work includes carriage and handling support from sectional store to pit site as well as any fabrication work if required. (3 Nos. 33 KV G.I Pin, necessary clamps, F-Bracket, stone pad shall be provided by Contractor.)
STP,SP 55 Round Pole 11 Mtr. Long
Errection of Sectional Double Pole support /Exposure Double Pole (for hoisting of Cable)
The excavation of foundation pit of size (750x450) mm and having depth of 1/6 of the full length of the support. Errection of support, complete with providing & Fixing of all clamps and other accesories as per dwawing. The work includes carriage and handling of supports from sectional store to pit site, fixing of Top Channel and cross bracing sets as well as any fabrication work if required. (3 Nos. 33 KV G.I Pin with nuts, Top channel clamps, Bracing angle Clamp, E-Bracket, Disc fitting, bolt and nuts, stone pad as per norms etc shall be provided by Contractor.)
STP,SP 55 Round Pole 11 Mtr. Long
Errection of Four Pole Structure
The excavation of foundation pit of size (750x450) mm and having depth of 1/6 of the full length of the support. Errection of support, complete with providing & Fixing of all clamps and other accesories as per dwawing. The work includes carriage and handling of supports from sectional store to pit site & fixing of Top Channel and Cross Bracing sets as well as any fabrication work if required. (3 Nos. 33 KV G.I Pin with nuts, Top Channel clamp, Bracing clamp, E-Bracket, Disc fitting, stone pad as per norms etc shall be provided by Contractor.)
STP,SP 55 Round Pole11 Mtr. Long
Concreting and plinthing of Poles
Grouting of supports in PCC 1:4:8 (cement, sand, & 20 mm size stone Grit). Grouting will be done in the block of size (450x450)mm x 1/6th of full length of support, upto ground level, 300mm plinth above the ground level with C.C 1:3:6 (Cement, Coarse sand and Stone grit of 20mm of size with muffing as per drawing).
STP,SP 55 Round Pole 11 Mtr. Long
Providing and Fixing of Stay rod (size 20x1800 mm)
Providing and Fixing of Stay set complete (size 20x1800 mm) on different types of supports as per drawing. (8 Nos.on each sectional pole) (GI stay set 20x1800 mm, stay wire 7/8 SWG, stay clamp, bolt,nut & washer shall be provided by conctractor.)
Grouting of stay rods including all work of excavation, cement concrete in size (0.60x0.6x0.30)m in ratio 1:4:8 cement, sand, 400mm brick ballast as per drg. Including back filling of soil and proper ramming.
Stringging and Sagging of Conductor
Laying, Spreading, lifting and final sagging of 3 phases of ACSR Dog conductor in accordance with Line chart including binding and fixing of all accessories in 03 Nos. Conductor in Parallel.
Making jumpers on Section Points, by providing and fixing of P.G. Clamps of proper sizes, suitable for Dog Conductor
Sectional Double Pole structure
Secton Four Pole structure
Laying of Cable
Laying of 33 KV 3x300 Sq.mm XLPE Cable In Double circuit in normal soil by digging of trench 1050 mm deep, 750 mm wide including supply of required material as fine a sand, Ist class bricks, Inter axial spacing between the two cable should be in between 0.25 . to 0.40m, the two cables should be separated by a partition of single bricks along the cable and stone's slab/brick on top of the each cable, including back filling of soil and proper ramming.
Laying of 33 KV 3x300 Sq.mm XLPE Cable by drill method in Double Circuit with the help of H.D.D. machine (Trenchless technology method by Deep Drilling System) with proper testing.
Installation of Heat Shrinkable Type cable jointing kits 3x300 mm.sqr. Cable
Straight through
End termination kit
Hoisting of 33 KV Cable
Hoisting of 33 KV Cable on existing/erected support by MS Pipe 150 mm dia 3 mtr long suitable for 3x300 sq mm cable fixing of proper support and its clamping, jumpering properly as per RESSPO Norms. (MS pipe, supporting channel and clamps shall be provided by contractor).
Miscellaneous Work
Supply & fixing of danger board at each location as per specification of drawing.
Earthing of support with M.S. Earth rod of (20x2500 mm) long including excavation of pit and driving M.S. rod 0.5 mtr. Below the ground level and connecting the electrode with help of G.I. wire No 8 SWG and earthing lug. (G.I. Wire, bolt and nut and lugs shall be provided by the contractor.)
Chopping of branches of trees of eucalyptus, Neem, Keeker and other kind of trees along the route of the line and disposal of the same at suitable place.
Cradle Guarding of 33KV line at road crossing, 11 line crossing, canal/telephone line crossing by fixing M.S. Angle 75x75x3500 mm at double pole and 75x75x2600 mm long at single pole by strining and sagging of 3 No. G.I. wire, tighting with mounting. (MS angle and GI wire shall be provided by the controctor).
Wraping of barbed wire on 33 KV SP-72/SP-55 ST Poles as anti climbing device for a length of 0.9 Mtr. Wire pitch /Gap 33 mm and fixing upper and lower end keeping lower end at a height of 2.75Mtr. From the ground complete with providing and fixing of lower end & upper end clamps made of M.S Flat 40x5mm complete with nuts&bolts. (All the material will be supplied by the controctor).
Painting of following supports/structures with 2 coats of synthetic enamel Aluminium Paint after one coat of ready mix primer including cost of all material, as well as rubbing/cleaning of surface as required for proper completion of work.
Single Pole STP 11 mtr. Long.
Double Pole structure on STP 11 mtr. Long.
Four Pole Structure on STP 11 mtr. Long
Ms Agarwal Electric Traders
M/s S S Associates
stage.html
html • 0.03 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .