SPL REPAIR TO ROAD OF BLDG NO P-01 CAMBRIDGE ROAD, P-01 CARIAPPA ROAD, 98-B CANTT ROAD AND 15/65, CIVIL LINES AND ROADS OF WHEELER BARRACKS KANPUR UNDER GE (I) KANPUR CANTT

M&L for Preparation of black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a prime/tack coat with bituminous primer @5 kg/10 Sqm complete all as specified and directed.

M&L for premixed Semi Dense Asphaltic Concrete 30 mm thick consolidated thickness with VG-30 (paving bitumen) ( min marshall stability 820 kg) laid in single layer with min 5.5% binder content and min 2 % cement filler mix of total mix, combined grading and mix proportion should be ascertained as per IRC:111-2009 and should be used for execution after obtaining design mix / job formula from approved lab/ CTL. Mix to be prepared through hot mix plant and laying to be done using sensor paver, rolled and compacted to required camber and gradient using 8 -12 tonne vibratory roller complete all as specified and directed. Note - Before execution of design mix/ job mix formula should be approved by GE after verifying credentials of report obtained.

M&L for marking 2.0 mm thick center line stop line, side line etc on roads as per IRC pattern with thermoplastic paint of approved quality and made with 8% glass beads laid on the road surface at temperature 60 degree centigrade with special applicator machine with and including traffic diversion arrangement complete all as specified and directed.

Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc complete all as specified and directed.

Demolition of concrete in ground floors and paving n exc. 15cm thickness (below or above ground level) un-reinforced concrete & removal of rubbish beyond defense land complete all as specified and directed.

Plain cement concrete 1:4:8,Type D2 (using 40 mm graded stone aggregate), 75mm thick as in sub base complete all as specified and directed.

Providing and laying 80mm thick factory made chamfered edge cement concrete paver block of M-30 grade with approved colour, design & pattern as in footpath, parks, lawns, drive ways or light traffic parking etc., of required strength, thickness & size/ shape, made by table vibratory method using PU mould, laid in required colour & pattern over and including 50mm thick compacted bed of coarse sand, compacting and proper embedding/ laying of inter locking paver blocks into the sand bedding layer through vibratory compaction by using plate vibrator, filling the joints with fine sand and cutting of paver block as per required size and pattern, finishing and sweeping extra sand; complete all as specified and directed.

M&L for Continuous brick edging with burnt clay bricks of sub class B (old size) bricks with width equal to the depth of the brick, laid on end vertically including tempering ground around bricks and also for removing any surplus soil etc complete all specified and directed.

Supply and fixing dual directional reflective cat eye of aluminium casted stud 100 x 100 mm having plastic ABS strip containing 31 mini retro reflective glass beads of colour white/red/yellow one side provided with zinc plated nail of 12 mm dia and length 120 mm for fixing to road by hammering complete all as specified and directed. Cat part No-GPL 01-02 CAT EYE AL(31B) of Greenlite/ Cat part No OS-785 Make Oscaror equivalent in Dark eye/Road star / Siner Infrastructure.