GE 874/EWS-59/2021-22

Amount

B/R Portion

Dismantling of timber scantlings 40 sq cm and over in sec in any position in unframed work.

M &L for second class soft wood as in scantling clean sawn fixed in position.

M & L for second class soft wood as in scantling clean sawn fixed in position but except wood.

Dismantling of boarding, any description, fixed in any position with nails.

M & L for 2nd class softwood weather boarding clean sawn, plain 20mm thick or feather edge 15mm to 20mm thick and fixed with 30mm laps.

S&F Eaves Boarding of 20mm thick of Softwood 2nd class with nails in any situation (except flooring and skirting), Planed one side with butt joints.

S&F 4mm veenered decorative Plywood, grade1 BWR with resin with a decorative face veneers on one faces, fixed in ceiling, with screw to timber frame complete all as specified and directed.

S&F 4mm veenered decorative Plywood, grade1 BWR with resin with a decorative face veneers on one faces, fixed in wall, with screw to timber frame complete all as specified and directed.

S&F plywood, grade BWR type BB fixed with screw to timber frame of 4mm thick complete all as specified and directed.

S&F plywood, grade BWR type BB fixed with screw to timber frame of 6mm thick complete all as specified and directed.

S&F plywood, grade BWR type BB fixed with screw to timber frame of 12 mm thick complete all as specified and directed.

S&F clean swan batten at 30 Cm centre to centre exc 5 and not exc 15 cm of 2nd class softwood complete all as specified and directed.

Plain fillet, square, rectangular or triangular in section, clean sawn exc 3 Sqcm sand not exc 6 Sqcm secured with nails.

M & L for applying two coats of synthetic enamel point over a coat of pink primer including preparation of new wooden surface exc 10 cm width or girths.

M& for one coat of synthetic enamel paint over old wooden surfaces including preparation of surfaces over 10 Cm width or girth.

Dismantling plain or corrugated steel sheeting any gauge thickness in roof covering.

S&F pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified.

All as per item above but plain sheet as in roof covering /cladding to wall fixed with tapping screws.

Hacking out old broken glass (any thickness size quality or description) from wooden frame glazed with putty or wooden beads.

M & L sheet glass ordinary quality and glazing with oil putty in square n.exc 0.5 in each pane, 3mm thick.

S&F galvanised mild steel wire cloth .56mm nominal dia of wire and average width of aperture 1.18mm including fixed in repair all as specified.

One coat of synthetic enamel paint over old galvanised surface including preparation complete all as specified.

Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed.

M&L Non skid ceramic coloured tiles 7-8 mm thick, area exc 0.06sqm but nexc 0.11 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in Cement Mortar 1:4 and including 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base , complete all as spd & directed.

M&L Non skid ceramic coloured tiles 7-8 mm thick, area exc 0.11sqm but nexc 0.18 sqm of each tile in floor etc set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tile on 15mm thick screed bed in Cement Mortar 1:4 and including 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base , complete all as spd & directed.

M&L Glazed ceramic coloured tiles (300x200x7mm) thick, as in vertical surface such as in skriting and dado etc, set & jointed in neat cement slurry and pointed in white or coloured cement to match the colour of tiles, over 10mm thick rendering in Cement mortar 1:4 all as specified.

M&L Light shade Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15 mm Cement Mortar 1:4 thick screed bed and including 25mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregate) as in sub base all as specified and directed.

Taking up or down 15mm bore steel tubing and connections including cleaning for refixing or removal to store.

S&F 15mm GI steel tubing medium grade with all fittings and fixed complete to walls and ceiling and laid in floors.

Taking up or down 20mm bore steel tubing and connections including cleaning for refixing or removal to store.

M&L 20 mm tubes medium grade galvanised with all fittings and fixed complete to walls and ceilings or laid in floors.

S& F in repair Lagging to pipes used in internal water supply or plumbing all round with, 25min thick bonded mineral wool preformed ‘SNAP ON’ pipe sections of density 144 Kg/cum conforming to IS 9842

S& F 15 mm dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed in repair complete to walls, ceilings or in floors etc.

S& F 20 mm dia 3-layer PP-R Polypropylene random copolymer) concealed pipes SDR 7.4 (PN16) UV stabilized and antimicrobial fusion welded having thermal stability for hot & cold water supply including all PP-R plain & brass threaded polypropylene random fittings fixed in repair complete to walls, ceilings or in floors etc.

Dismantling water tanks of 500 ltr capacity and removing to store.

Dismantling water tanks of 1000 ltr capacity and removing to store.

500 ltr capacity rotational moulded polyethylene water storage tanks (Cylindrical vertical with closed top) and fixed in position including dismantling of old tank, all as specified in SSR Part-I, complete all as specified and directed.

S&F 1000 Ltr capacity PVC water storage tank (cylinderical vertical with closed top ) and fixed in position all as specified in SSR Part -I, including dismantling of old tank .

S & F in repair 15mm bore bib taps Standard of PTMT any colour high pressure, screwed both ends for iron pipe or for brass ferrule (min weight 15mm-90gms), fixed in repair, complete all as specified.

S & F 15mm bore Pillar tap of PTMT any colour high pressure screwed for iron pipes or for union (min weight 15mm-110gms), fixed in repairs, complete all as specified.

S & F 15mm bore Stop valve of PTMT any colour high pressure, screwed both ends for iron pipe or for brass ferrule (min weight 15mm-90gms), screwed both ends for iron pipes or for union, fixed in repairs, complete all as specified.

Waste coupling of PTMT (half or full threaded) (Minimum weight 32mm-45gms) for 32mm bore dia of discharge pipe to WHB, sink fixed in repairs, complete all as specified.

PVC connection 15mm size with PTMT nuts on both ends of length 600mm fixed in repair, complete all as specified.

PVC connection 15mm size with PTMT nuts on both ends of length 450mm fixed in repair, complete all as specified.

PVC (SWR) pipes 75mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe, fixed in repair, complete all as specified.

PVC (SWR) pipes 110mm dia any length single socketed with rubber ring joint, laid in floor/walls as soil pipe, fixed in repair, complete all as specified.

PVC valve less symphonic action dual type flushing cistern of 10ltr capacity , low level white with inlet ball valve float and handle including brackets including 32mm dia PVC. flush pipe for low level cistern including all joints fixed in repair, complete all as specified.

S&F ball valves, high pressure,with polythene float and flynut complete ,20mm bore all as specifed and directed.

S&F Vitreous China wash basin, white, flat back of size (550x 400) mm incl cutting for and pining, in ends of brackets or erecting stand but exclusive of fixing of supply and waste pipe as in repair.

S&F sinks made of stainless steel 1mm thick with plugs and wastes including in cement mortar onto dwart wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160m including waste pipe & coupling 32mm in repair.

S&F Towel Rack with lower hanger (stainless steel), fixed in repairs, complete all as specified and directed.

S&F Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified.

S & F Wall mixer non telephonic Shower arrangement with connecting legs & Wall flanges, fixed in repairs.

S&F Central hole Basin Mixer for WHB with Round Spout with popup waste system with 450mm Long Braided Hoses, 20mm Cartridge Size suitable for 15mm bore GI pipe,Triple Action, in repairs.

S&F Plate Rack (stainless steel), fixed in repairs, complete all as specified and directed.

S&F in repair gun metal globe gate valve 20 mm bore.

12 mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face

18/19 mm thick Block boards, grade 2 quality, interior grade, decorative type with decorative face veneer on one face

2 lever brass Mortice lock, vertical type, size 100 mm.

Extruded aluminium alloy handles, fabricated type, anodised 75 mm long.

S & F Continuous (piano) hinges, mild steel, bright finish or electrogalvanised 30 mm width of flap complete.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sq. m each.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 Sqm and not exc. 4.0 sqm each.

M & L Factory made solid panel PVC door shutter 30mm thick (style), consisting of frame made out of MS tubes for top & bottom rails. M. S. frame shall be covered with heat moulded plain colou PVC 'C' channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side and as gap insert for top rail and bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/sealed to the stiles and rails with suitable PVC sheet beading, and jointed together with solvent cement, supplying and fixing in the frame at site as per specification and drawing of SSR No 08080 of Part-II, fixed in repair, as directed by EIC.

M & L Solid PVC door frame of size 50mm x 47mm made out of 5mm thick plain colour PVC sheet reinforced with MS square tube, supply and fixing in repair, complete all as specified and shown in relevant drg including fixing of 150mm long aluminium anodised tower bolt -02 Nos, 03 Nos medium weight cold rolled MS butt hinges and 01 No in each shoe type L-drop, complete all as specified.

S&F 2nd class Hard Wood Plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints

S&F 35 mm thick 2nd class hard wood plain, framed, pa-nelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers; supplied and fitted to chowkats

S&F MS butt hinges 100mm long medium weight.

S&F MS butt hinges 75mm long medium weight

S & F 200mm long aluminum alloy, anodized barrel tower bolt of extruded section.

S&F 125 mm long aluminium alloy, anodised barrel tower bolt of extruded section.

S & F 250mm long aluminum alloy anodized sliding door (bolt type) and fixing clips of sheets, cast of extruded sections and fixing bolts and sliding bolts of extruded section of cast-aluminum alloy.

S & F 125mm Extruded aluminium alloy handles, fabricated type, anodised.

S & F Floor door stopper of aluminium alloy body and tongue, anodised, with hard drawn steel spring, fixed in floor.

S&F as in repair cast iron body Door closer hydraulically regulated, designation No. 3, universal type, suitable for door shutters of 851 to 1000 mm in width and of weight between 61 to 80 kg and fixed all as specified and directed.

M/S SS SHAH WALI & CO

M/S GM CONSTRUCTIONS

POPULARHARDWARESTORE

M/S AK CONSTRUCTION

M/S BIG STRUCT CONSTRUCTIONS

M/S MUNEER AHMAD WANI CONSTRUCTIONS

M/S MOHAMMAD JAMAL WANI

M/S S. D. BUILDERS

M/S KAENAT ENGINEERS

Bidder Name

M/S MOHAMMAD JAMAL WANI

M/S KAENAT ENGINEERS

M/S S. D. BUILDERS

M/S SAJAA CONSTRUCTION COMAPNY

POPULARHARDWARESTORE

M/S SS SHAH WALI & CO

M/S BIG STRUCT CONSTRUCTIONS

M/S GM CONSTRUCTIONS

M/S AK CONSTRUCTION

M/S MUNEER AHMAD WANI CONSTRUCTIONS