GE S U 30 2022 23 SPECIAL REPAIR TO BLDG NO NP 10 COOK HOUSE ADDN ALTN IN BLDG NO P50 AT HQNC UNDER GE SOUTH UDHAMPUR

Amount

Taking down chowkats or frames with shutters (without taking off shutters from the frames) not exc. 1.5 sqm each and removing to store complete all as specified and as directed.

Taking down chowkats or frames with shutters (without taking off shutters from the frames) exc 1.5 sqm but n.exc 4 sqm each and removing complete all as specified and as directed.

Taking down cement plaster of any descreption on brick/stone walls or concrete surfaces including racking out joints, hacking for key scrubbing down with water etc on walls and ceiling complete all as specified and as directed.

Dismantling floor hearth or wall tiling including cement mortar bedding but not backing complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for complete all as specified and as directed.

75 mm thick PCC 1:4:8, type D-2 (using 40 mm graded crushed stone aggregates) as in sub base floor complete all as specified and as directed.

Machine cut Kota stone slab flooring 18-20mm thick over cement screed base 15 mm thick in CM 1:6, laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Kota stone slab 18-20mm thick in riser of steps, skirting, dado and pillar laid over cement screed 10mm thick in CM 1:4, and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and as directed.

Vitrified ceramic tiles light shade 10mm thick (square/rectangular) polished, area of each tiles n exc 0.36 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match over and including 15 mm thick screed bed in CM 1:6 complete all as specified and as directed.

Glazed Coloured Ceramic tiles in vertical surface 300mm x 450mm x 7mm or 300mm x 600mm x 7mm thick laid over 10 mm thick screed bed in CM 1:4, set and joint in neat cement slurry and pointed in white or colour cement to match complete all as specified and as directed.

125mm x 60mm Pressed steel frames for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc complete all as specified and as directed.

30mm thick IInd class hardwood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze, etc. divided into squares, with plain, chamfered or rounded, mitred and rebated sash bars, any numbers, for securing glass, etc, sizes of members of shutters as specified in relevant SSR Part I, fitted to chowkats complete all as specified and as directed.

30mm thick, flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and as directed.

Powder coated anodised aluminium doors, shutters with chowkat, aluminium section weighing 0.55 kg/ m including necessary joining cleats, glazing clips, 5mm thick glass or prelaminated particle board, rubber neoprene packing , handles 2 nos in each door hinges, anodised aluminium, snap beading screws etc. complete all as specified and as directed.

Powder coated anodised aluminium window and ventilator shutters, side hung type without sash bar aluminium section weighing 0.55 kg/m including necessary joining cleat, glazing clips, including 5mm thick glass or wire mess, rubber packing , anodised aluminium snap beading screws , anodised aluminium fitting such as peg stays 150mm long (1 no) hinges type B-12 100mm long (2 no ) suitable handle (1 no) etc complete all as specified and as directed.

Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS:733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws, complete all as specified and as directed.

Sheet glass 5.5mm thick, ordinary quality and glazing with oil putty/rubber gasket in square exc 0.5 sq m in each pane complete all as specified and as directed.

Stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed.

150mm long aluminium, anodized, barrel tower bolts of extruded section complete all as specified and as directed.

Butt hinge 100mm size, medium weight, cold rolled mild steel complete all as specified and as directed.

150mm aluminium handles, cast type, anodised complete all as specified and as directed.

300mm mild steel sliding door bolts plate type stove enamelled black with bright bolt not less than 12mm dia with and including a minimum of 6 bolts and nuts, four on bolts plate and two on staple plate complete all as specified and as directed.

Pre-Painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws including dismantling of old AC sheet complete all as specified and as directed.

Pre-Painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50 mm thick of an colour having tensile strength of 550 Mpa as in roof covering /cladding to wall, fixed with self tapping screws including dismantling of old AC sheets complete all as specified and as directed.

Granite stone 18-20mm thick (table rubbed and polished) in window cills, cooking platforms and the like not less than 1 Sqm (in one piece), laid over 15mm thick layer of cement mortar 1:3 after roughening of existing concrete surface and applying a layer of neat cement slurry @ 3Kg/Sqm including pointing in white cement 1:2 using marble dust with admixture of pigments to match with shade of stone, including demolition of stone slabs and tiles of any description or thickness in floors etc. laid, bedded and pointed in any mortar complete all as specified and as directed.

Mild steel framed work such as grills, gratings, etc with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 290 Gde-E-165 complete all as specified and as directed.

Rolled mild steel Fe-410w (Gde-E-250) quality 'B' Roof trusses (framed) , trussed, purlins, crane gantries , rails and fastening and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces cleats etc complete all as specified and as directed.

Brick work with sub class 'B' bricks exc 6m mean radius straight or curved on plan built in cement mortar 1:6 including demolition of old brick/stone masonry complete all as specified and as directed.

Cement concrete 1:2:4 type B1 (using 20 mm graded crushed stone aggregates) use in coping, hold fast and similar work including naccesary form work complete all as specified and as directed.

Rendering 15 mm thick on brick or concrete surfaces of walls in CM (1:4) including finishing the surfaces fair and even without using extra cement complete all as specified and as directed.

Rendering 15 mm thick on brick or concrete surfaces of walls in CM (1:6) including finishing the surfaces fair and even without using extra cement complete all as specified and as directed.

S & F in repair 15mm bore bib tap of cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed.

S & F in repair 15mm bore stop valve/angle cock, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions, complete all as specified and as directed.

S&F in repairs Brass CP mixer for mixing hot & cold water screwed down for iron pipe and fixed complete all as specified and as directed.

S&F in repairs sinks made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and as directed.

PVC connection 15 mm dia and 600mm long with two Nos of brass check nuts and washers complete all as specified and as directed.

15mm steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls including taking down old pipe complete all as specified and as directed.

20mm steel tubing galvanized, medium grade with all fittings, laid in floors or fixed to walls including taking down old pipe complete all as specified and as directed.

1000 Litres Rotational moulded polyethylene water storage tanks (cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I and PTMT ball valve 20mm dia including taking down of old tank and removing from site complete all as specified and as directed.

S & F in repair of gun metal gate valve, painted finish, with forged brass spindle and iron wheel head, screwed both ends for iron pipe of size 20mm bore complete all as specified and as directed.

110 mm PVC (SWR) pipes single socket in any length with rubber ring joints fixed to wall complete all as specified and as directed.

110 mm PVC (SWR) bends any radius with access door complete all as specified and as directed.

PVC (SWR) Floor trap, 75 mm dia of outlet, plain with grating including jointing with solvent cement and making good complete all as specified and as directed.

Preparation of newly steel and iron surfaces exceeding 10 cms width or girth and applying two coats of synthetic enamel paint complete all as specified and as directed.

Applying 1 mm thick layer of wall putty on walls to give uniform surface, surface scrubed with emery paper and make surface good and clean complete all as specified and as directed.

Preparing old surfaces of wall and applying two coats of weather proof exterior emulsion paint (APEX or equivalent) up to G+3 floor height etc complete all as specified and as directed.

Preparation of new plaster surfaces of walls and applying two coats of oil emulsion distemper (white/tinted) complete all as specified and as directed.

Demolition of cement concrete in ground floor and pavings n.exc 15cm thick below or above ground level complete all as specified and as directed.

75 mm thick PCC 1:3:6 type C-2 (using 40mm graded crushed stone aggregates) as in sub base for receiving floor finishes finished even and fair complete all as specified and as directed.

25mm thick PCC 1:2:4 type B-0 (using 20mm graded crushed stone aggregates) as in sub base for laying floor finishes complete all as specified and as directed.

15mm thick screed bed or bedding layer of mortar for laying floor finishes in CM 1:4 complete all as specified and as directed.

Dura stone heavy duty vitrified tiles of size 300mm x 300mm x 8-105mm thick as in floors set and jointed in neat cement slurry and pointed in white cement to match the surface complete all as specified and as directed.

Machine pressed (factory made) precast plain cement concrete 1:2:4 type B-1(using 20mm graded crushed stone aggregates), kerb stone & the like of size 300mm x 300mm x 100mm thick or of size as approved by GE, with plain fair faces including chamfers, weathering etc, embedding in position/laid in trenches on edges of roads, including excavation in any type of soil, setting in cement mortar (1:4) returning filling and removal of surplus soil/debris to a distance n.exc. 50m from the starting point, complete all as specified and as directed.

Removing excavated soil/debris to a distance exc 50m and nexc 1.5 Km and depositing at level n exc 1.5m above the starting point, including debris complete all as specified and as directed.

Excavating in trenches not exceeding 1.5m wide and n.exceeding 1.5m in depth; for foundation etc or similar work and gating out in any type of soil complete all as specified and as directed.

PCC 1:4:8 type D-2 (using 40mm graded crushed stone aggregates) as in foundation, filling and mass concrete complete all as specified and as directed.

Plain cement concrete1:2:4 type B-2 (using 40 mm graded crushed stone aggregates) as in channels and drains, foundation and similar work etc complete all as specified and as directed.

PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in coping, benching and similar work etc including necessary form work complete all as specified and as directed.

Brick work with sub class 'B' bricks straight or curved on plan exc 6 mtr mean radius built in CM (1:4) as in drain, walls and similar work etc complete all as specified and as directed.

Returning filling in including spreading levelling watering and well ramming in layers not exc 25cm complete all as specified and as directed.

Precast reinforced cement concrete (1:2:4) type B-1 (using 20mm graded crushed stone aggregates) for drain cover,manhole cover septic tank covers slabs etc including necessary form work and set in CM (1:4) complete all as specified and as directed. (Note:- reinforcement will be measured and paid seperately.)

Mild Steel TMT bars 6-8 mm dia and cut to length bent to shape required including cranking, bending, hooking ends and bending with MS wire not less than 0.9mm dia or securing with clips quality conforming complete all as specified and as directed.

300 mm dia reinforced concrete pipes, class NP-2 laid and jointed complete with collars. complete all as specified and as directed.

Cement concrete 1:4:8 type D-2 for concrete bed to 300 nmm dia RCC drain pipe including packing under and haunching against the sides of pipes after they are laid & testing complete all as specified and as directed.

Demolition of reinforced cement work as in roof slabs (other than ground floors) beams staircases , landing chajjas, drop facia and similar suspended work complete all as specified and as directed.

75 mm thick plain cement concrete 1:3:6 type C-2 (using 40 mm graded crushed stone aggregates) as in plinth protection complete all as specified and as directed.

Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile exceeding 0.42 sqm but not exceeding 1.00 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Vitrified ceramic tiles 10mm thick (square/rectangular) area of each tile not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match complete all as specified and as directed.

Rendering 10mm thick on fair faces of brick work or concrete surface in CM 1:4 on vertical surfaces/backing coat complete all as specified and as directed.

All as per item No 68, but skirting/dado complete all as specified and as directed.

All as per item No 69, but skirting/dado complete all as specified and as directed.

25 mm thick PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) as in sub base finished fair for receiving floor finishes complete all as specified and as directed.

Aluminum door closer (aluminum extruded section) hydrautically regulated , designation No 3 , universal type, suitable for door shutters of 851mm to 1000 in width and of weight 61 to 80 kg complete all as specified and as directed.

Aluminium body heavy duty double action floor spring suitable for glass shutter at both side rotable complete all as specified and as directed. Make : OMEGA/HARDWIN

Providing and injecting Along the external wall below concrete or masonry apron using Antitermite Treatment chemical emulsion @ 2.25 litres per linear metre including drilling and plugging holes etc. in apron complete all as specified and as directed. (Note: The treatment work shall be carried through authorised agencey only and certificate for the same for warranty shall have to frunished before submitting payment)

Providing and injecting Treatment Anti Termite Treatment of soil under existing floors using emulsion @ one litre per litre per hole, 300mm apart including drilling and plugging 12mm dia holes with cement mortar 1:2 (1 cement :2 coarse sand) to match the existing floors complete all as specified and as directed. (Note: The treatment work shall be carried through authorised agencey only , and certificate for the same for warranty shall have to frunished before submitting payment)

Providing and injecting Anti Termite Treatment At points of contact of wood work by chemical emulsion (in oil or kerosene based solution) @ 0.5 litre/hole by drilling 6mm dia holes at a downward angle of 45 degree at 150 mm centre to centre and sealing the same complete all as specified and as directed. (Note: The treatment work shall be carried through authorised agency only , and certificate for the same for warranty shall have to frunished before submitting payment)

Taking down cement plaster on brick/stone wall etc including raking out joints, hacking for key, scrubbing down with water etc complete all as specified and as directed.

Rendering 5 mm thick on fair faces of concrete finished even and smooth without using extra cement in cement mortar 1:3 complete all as specified and as directed.

Preparation of new plastered or un- plastered surfaces of walls including cornices, pilasters etc and applying two Coats of cement base paint over a coat of primer complete all as specified and as directed.

Complete removal of existing treatment and applying two coats of oil bound distemper over a coat primer with two coats of wall care putty complete all as specified and as directed.

Complete removal of existing treatment applying two coat of cement base paint over a coat of primer paint on walls complete all as specified and as directed.

Complete removal of existing treatment of wall surface and applying two coats of plastic emulsion paint (Shade approved by GE) over two coat of wall care putty complete all as specified and as directed.

Complete removal of existing treatment/new plaster surface (using removal machine) including preparing surfaces of wall and applying two coats of weather proof exterior emulsion paint (APEX or equivalent) over a two coat of wall care putty with a coat of Primer complete all as specified and as directed.

Taking down shutter only exc 1.00 sqm but n.exc 2.00 sqm and fixing in the same opening of any description complete all as specified and as directed.

First class hard wood plain solid straight chowkats and frames and Design doors Pannel shutter with wrought framed on the solid rounded, Plemet box , partition shutter big size or chamfered put together with glue and pinned at joints including preservative treatment complete all as specified and directed

150 mm brass barrel tower bolts,with cast or sheet and rolled or cast bolts complete all as specified and as directed.

Brass, sliding door bolt with sand or die-cast brass hasp, staple (bolt type) and fixing bolt with rolled or drawn brass bolts 300 mm complete all as specified and as directed.

125 Butt hinges, extruded brass, with mild steel hinge pin, bright polished and fixed, type C-12 complete all as specified and as directed.

150 mm length Brass handles, cast type, polished bright Extruded brass handles, fabricated type polished complete all as specified and as directed.

Two coats of synthetic enamel paint on new steel surfaces including preparation over a coat of red oxide Zinc chrome primer complete all as specified and as directed.

Preparation of new wooden surfaces of any description not other wise described over 10 cm width or girth applying two coats of synthetic enamel paint over a coat of primers complete all as specified and as directed.

Preparing old wooden surface & applying two coats of synthetic ennamel paint over a coat of pink primer over 10cm width or girth complete all as specified and as directed.

One coat of synthetic enamel paint over a coat of on old steel surfaces including preparation of surfaces complete all as specified and as directed.

3 mm thick glass sheet oridinary quality in steel or wooden frames complete with fixing materials such as putty glazing pins wooden beads etc complete all as specified and as directed.

18/19mm thick plywood grade BWR ,type BB fixed with screws to timber frame work complete all as specified and as directed.

12mm thick plywwod grade BWR, type BB, fixed with screws to timber frame work complete all as specified and as directed.

0.9 mm thick decorative choice of lamination type -1 of surface finish , colour and pattern as approved adhesive as per manufacturers instructions complete all as specified and as directed.

Roughening surfaces of concrete floor by picking sweeping cleaning & washingg down with water to remove dust etc including removal of old treatment of any description and applying one coat of neat cement slurry @ 3.00 kg/Sqm complete all as specified and as directed.

Cutting grooves to a depth 75mm and 100mm height in columns of water tank base and after tucking in of roof treatment sealed with PCC 1:2:4 type B-0 (using 12.5mm graded crushed stone aggregates) and making curve complete all as specified and as directed.

PCC 1:2:4 type B-0 (using 12.5 mm graded crushed stone aggregates) as in level course on roof surface 25 mm thick etc complete all as specified and as directed.

Rendering 10 mm thick in CM 1:3 mixed with integral water proofing compound as per manufacturers instructions as in roof and chajjas, and drop facia finished the surface fair and even with out using extra cement complete all as specified and as directed. (Note : Supply of water proofing compound will be measured and paid separately .)

Applying bituminous primer on roof surfaces @ 0.40 ltr/sqm and applying one coat of hot blown bitumen of grade 85/25 @ 1.20 kg/sqm and provide modified polymeric five layered APP (Atactic Polypropylene) Modified Polymeric Membrane with 100 micron high molecular high density polythylene film. Min wt of memebrane will be 3.5 kg/sqm and bonded completely to the surfaces with min end overlap of 15 cms and side lap 75 mm (overlaps to be bounded with thermo fused by flame) and over APP applying one coat of hot blown bitumen 85/25 @ 1.2 kg/sqm blinded with fine sand in dry condition @ 0.5 kg/sqm including two coats of bituminious alluminium paint complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

PVC wall lining consisting of 5 mm thick plain colour PVC sheet inclusive of solvent cement and fixing at site on PVCf rame as per site requirement complete all as specified and as directed.

10 mm thick PVC sheet fillets of width 35 mm for wall panelling inclusive of fixing to wall to make PVC frame as per site requirement. complete all as specified and as directed.

Supply only for 5.5 mm thick tinted glass pane for glazed fixing for aluminium partition/ Windows complete all as specified and as directed.

10mm thick Gypsum boards as in ceiling plain ,moisture resistant , including heavy duty like intermediate , perimeter channel ceiling channel nuts and bolts connecting plates gypsum boards ,dry wall screws soffits cleats ,ceiling section,rowel plugs fixtures and screws complete all as specified and as shown in sketch and applying two coats of emulsion paint over a coat primer on exposed surfaces.Design of ceiling board as approved by GE.

PCC 1:2:4 type B-0 (using 12.50mm graded crushed stone aggregates) for coping, corner of roof and similar work any discription complete all as specified and as directed.

Dismantling of PVC Pipes of dia 75/110 mm complete all as specified and as directed.

110 mm PVC (SWR) couplers for PVC pipe and similar work complete all as specified and as directed.

Powder coated 15 micron aluminium door of approved design complete all as specified/directed with all fixing arrangement including providing and fixing door handle, tower bolts, mortice lock 6 lever (Make - Harrison/Godrej) one on each door and , aluminium Powder coated tower bolts 200 mm long (03 Nos on each shutters) and 5mm thick tinted glass pane of glazed shutter along with aluminium glazing beading of size 19.00 mm x 17.5 mm x 0.70 mm @ weight of 0.097 Kgs per RM including rubber gasket on both side complete alongwith neoprene lining. The member shall be made out of extended aluminium section comprising of :- (Size of the door shall be as per site requirement) (a) Door frame of size 95.25 mm x 44.50 mm x 1.70 mm @ 1.301 Kg/RM.. (b) Shutter vertical member 85 x 44.50 x 1.56 mm @ 1.39 Kg per RM. (c) Shutter top member 83.50 x 44.50 x 1.54 mm @ 1.139 Kg per RM. (d) Shutter bottom member 101.60 x 44.50 x 1.60 mm @ 1.301 Kg per RM. (e) Shutter lock rail member 83.50 x 44.50 x 1.54 mm @ 1.139 Kg per RM. The actual measurement shall be taken, wastage shall be including in the rates, the above sections are from JINDAL/INDAL/HINDAICO/WALCO extruion. The contractor is at liberty to choose high section from approved make with minor variation in sizes and weight as approved. However nothing extra shall be paid for over size and over weight section also.

Aluminium powder coated frame , window shutters (glazed ,wire gauge and grill) side hung with aluminium window frame or chowkat 1.5 mm thick aluminium powder coated of size 100 mm x 44.5 mm and window shutter frames glazed and wire gauze (middle, top rail, bottom rail) and styles 1.5 mm thick aluminum powder coated of size 44.5x44.5 mm including powder coated aluminium grill 50mm x 50mm aperture and all fitting such as rubber gasket, aluminium glazing clips locking cabinet, 4 mm thick tinted glass pane for glazed shutters, stainless steel wire mesh for gauge shutter and hook and eye for each shutter fixed with rubber gasket and glazing clip/aluiminium beads aluminium tower bolt 75 mm 02 Nos each shutter, aluminium butt hinges 75 mm 02 Nos in each shutter aluminium handle 100 mm 01 No in each shutter inc all accessories complete all as specified and as directed.

4mm thick cement fibre board (designer ceiling) of size 600mm x 600mm panel conforming to IS 14862 type B category three including GI frame work with size of grid 605mm x 605mm including all accessories and GI suspensions the fibre sheet should be fire resistant, water resistant, termite resistant, environment friendly & 100% asbestos free including dismantling of old ceiling of any description complete all as specified and as directed.

Taking down carefully, copper/ aluminum point wiring (light, fan, socket or power) complete including fitting such as switch, sockets, ceiling rose, pendants socket,fan regulators any type, rectangular board ,light fittings,terminal boxes etc removing materials for taking credit and making good disturbed surfaces of walls floors and ceiling complete all as specified and as directed.

Taking down carefully copper/aluminium sub main wiring of size 2.5/4/6 sqmm from surface/concealed at any height and removing the materials from site and making good the disturbed surfaces of walls,floors roofs etc complete all as specified and as directed.

Taking down Old/ Unserviceable MCB DBs TPN / Main Switches by disconnection of electric connection including old unserviceable MCCBs,MCBs, isolators etc and making good to distrubed surface complete all as specified and as directed.

Disconnecting and taking down Unserviceable light fittings of any description/ capacity complete all as specified and as directed.

Point wiring for one light/ fan/bell point controlled by one switch using 1.5 Sq mm FRLS copper conductor cables (multistanded) PVC insulated and unseathed in and including PVC concealed conduit as per site requirement (thickness not less than 1.5mm and 20mm dia), medium grade with Modular sunken boxes & PVC back plate for mounting modular type switches, sockets & regulators etc with front plate modular type including supplying and laying PVC insulated unsheathed 1100 volts coppper conductor cable 1.5 Sq mm as earth wire stranded and conected to earth dolly complete all as specified and as directed. Note:- Cutting and making same the wall patchs after laying the wire and conduit using putty, white wash and distamper. The surface should be made smooth using putty and should match exactly with the existing wall finish.

All as per srl item No 120, but for 3 pin 6 Amps socket outlet independent board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and as directed.

All as per srl item No 120, but for 3 pin 6 Amps socket outlet on the same board including PVC insulated PVC unsheathed 1.5 sq mm earth wire and connected to earth dolly complete all as specified and as directed.

All as per Srl item No 120, but for 3 Pin 16 Amps socket outlet independent board with cable 2.5 Sq mm including copper PVC insulated PVC unsheathed 1.5 sq mm earth wire standard and connected to earth dolly complete all as specified and as directed.

All as per srl item No 120, but for One light point controlled by two 2-way switches,with cables 1.5 sqmm size complete all as specified and as directed.

All as per Srl item No 120, but for 3 Pin 15 Amps socket outlet independent with cable 4 Sq mm including copper PVC insulated PVC unsheathed 2.5 sq mm earth wire standard and connected to earth dolly complete all as specified and as directed.

Modular switch 10 Amps single pole two way 230 V, 50 Hz, AC , with inner and outer cover strip required module complete all as specified and as directed. Make: Havells/ Legrand/ANCHOR ROMA

Modular switch 6 Amps single pole one way 230 V, 50 Hz, AC , with inner and outer cover strip required module complete all as specified and as directed.

Modular switch 16 Amps single pole one way 230 V, 50 Hz, AC , with inner and outer cover strip required module complete all as specified and as directed.

Modular socket 3 Pin 6 Amps flush type 230 V, 50 Hz, AC , with inner and outer cover strip required module complete all as specified and as directed.

Modular socket combined 2-in-1, 6 Pin 6 & 16 Amps 230 V, 50 Hz, AC , flush type with inner and outer cover strip required module complete all as specified and as directed.

Electronic stepped type fan regulator 120 watt 230 volts 50Hz two module C/S deluxe type complete all as specified and as directed.

Ceiling rose, surface bakelite 65x 50mm two to three terminals fixed on PVC Round Block complete all as specified and as directed.

Sheet metal enclosure double door type for MCCB TPN DB upto 100 Amps, 4 way vertical type 415 volts with 400 Amps rated busbar and neutral link , chases wall for fixing DB and making good disturbed wall surfaces to match with existing specification complete all as specified and as directed.

Sheet metal enclosure double door type for DBs (when MCB to be used) 12 way 240 volts with 200 Amps rated busbar and neutral link including chases wall for fixing DB and making good disturbed wall surfaces to match with existing specification complete all as specified and as directed.

S & F in replacement MCCB Three Pole & Neutral capacity of 100 amps 415 volts rupturing capacity 16 KA complete all as specified and as directed.

S & F in replacement MCB Single pole and neutral 240 volt any rating from 40 Amps"C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and as directed.

S & F in replacement MCB single pole 240 volt any rating from 10 to 40 amps "C" series, with rupturing capacity 10 KA ,inculding providing thimble for out going cable complete all as specified and as directed.

S & F in replacement MCB single pole and neutral 240 volt any rating from 63 Amps "C" series, with rupturing capacity 10 KA inculding providing thimble for out going cable complete all as specified and as directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 10 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead including taking down old sub main wire complete all as specified and as directed.

Sub main wiring with two single core PVC insulated with copper conductor cable stranded of size 6 Sqmm in PVC concealed conduit 25mm dia including PVC insulated copper conductor cable 6 Sq mm as earth lead including taking down old sub main wire complete all as specified and as directed.

Earthing complete with galvanized steel earth plate electrodes 600 mmx600 mm x6.3 mm thick buried directly in ground earth plate not less than 2.25 m deep below normal ground level with top edge of the plate not less than 1.5 m below normal ground level connected to and including galvanized steel earth lead wire 4.00 mm dia by means of bolts, nuts, check nuts and washers of galvanized iron and steel including PCC pit in PCC 1:2:4 type B-1using 20 mm graded crushed stone aggregate, RCC frame with 40mm thick RCC cover reinforced with 8mm dia deformed bars handle. including excavation and earth work in any type of soil medium grade GI watering pipe 20mm bore with funnel and wire mesh and light grade GI protection pipe 15mm bore main board complete all as shown in electrical plate No 5 connected to main control board all as specified and testing on completion. Note: Excavation earthwork charcoal PCC pit is covered under this item including taking out existing earth plate etc.Note: if earth resistance of earthing is not found (2 to 5 Ω) satisfactory if will be redone by the contractor on his risk and cost.

Taking down ceiling fan/Exhaust fans (C/F of any size/make), cleaning its dust particles oiling,greasing,one coat of synthetic enamel white spray painting with blade ,reassemble the same along with all fittings and hanging the same back to its original position including connecting the wire to ceiling rose etc complete after completing the wiring complete all as specified and as directed. Note :- (i) The spares like condensor, ball bearing, cotter pin, nuts & bolts, connecting rods & hooks etc if found defective/damage deemed to be replaced and make the ceiling fans functional. No extra payments will be done on this account.

Angular Lamp holder, PVC/Polycarbonate type with cord grip cap suitable for light fittings complete all as specified and as directed.

Supply and fixing LED Bulb 15W, 230V,AC suitable for Angular Lamp holder complete all as specified and as directed.

Supply and fixing LED lights fitting 1x 22W, 230V,AC decorative box type with driver, holder including LED tube light connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

LED light fitting 1 x 9W/1 x 10W bulkhead luminaires including LED light driver holder connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing LED light fitting mirror type with high out put diffuser 2 feet, 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with three core flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing LED building security light fitting 35 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and as directed.

Street light Bracket complete made of GI pipe of suitable size, medium grade 1.2 m long bent to shape as per site requirement along with MS flat iron clamps with nuts, bolts, washers including grouting the same with wall complete all as specified and as directed.

Material & Laying in trenches or passing through pipe, 1100 volts grade heavy duty cable with "XLPE" insulated aluminium conductor standard served with an inner sheathing of PVC tape armoured with galvanised steel wire or tape and overall PVC sheathed of 25 Sqmm x 3.5 core size complete all as specified and as directed including taking down old cable. Note : Earth work and other connected work shall be measured & paid sperately.

Excavation in trenches and exceeding 1.5m wide and not exc 1.5m in depth in hard and dence soil and getting out complete all as specified and as directed.

Returing, filling in including spreading, leveling, watering and well ramming in layers not exceeding 25cm thick complete all as specified and as directed.

Removing excavated material (soil) to a distance not exc 50m and depositing where directed at a level not exc 1.5 m above the starting point complete all as specified and as directed.

Dry sand for sand cushioning to under ground cable 8 cms thick before laying the cable before and 15 cms thick after laying & streching the cable in trenches, including hand punning and consolidating complete all as specified and as directed. Note : for payment purpose punned thickness shall be measured

Bricks sub class 'B' brick laid dry, flat with width equal to length of brick as cover laid over the cabel to give mechanical protection to underground cabels complete all as specified and as directed.

Supply and fixing in repairs GI tubing light grade 40 mm dia along the wall/ in trenches/ in duct / in culvert /road crossing and including provisioning of suitable mild steel flat iron clamps and bolts, nuts and double washers etc for holdining of GI pipe alongwith poles complete all as specified and as directed.

Removing and refixing only LED lights fitting 5W to 20W, 220V,AC decorative box type with driver, holder including LED tube light C& S Make connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and as directed.

Supply and fixing exhaust fan, steel body AC single Phase. 230V of size 300m sweep with, blades, and frame and louvers along with all electrical wire connection complete all as specified and as directed.

Removing and refixing only water heater,25 ltr capacity 220V,AC single phase including nut bolt, copper conductor cable of suitable size complete all as specified and as directed.

Bell push flush type 5 Amp 230 V, 50 Hz, AC , complete all as specified and as directed.

Calling bell ding dong 230 volts single pole 50Hz complete all as specified and as directed.

Sheet metal enclosure double door type for DBs (when MCB to be used) Single pole & neutral 8 way 240 volts with 200 Amps rated busbar and neutral link including chases wall for fixing DB and making good disturbed wall surfaces to match with existing specification complete all as specified and as directed.

S & F in replacement Sheet metal enclosure single pole and neutral with a two pin and earth plug and socket complete with one single pole MCB 240 Volts 20 Amps nicluding taking down of old one complete all as specified and as directed.

S & F in repairs LED decorative down light fitting/recess mounted round type white/ warm white with high out put diffuser 12 watt 220 V AC with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete all as specified and as directed.

S & F in repairs LED building security light fitting 30 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp,clamps,suitable bracket with impact and corrosion resistant including thermal management in multiple optics complete all as specified and as directed.

S & F in repairs LED wall mounting mirror type white/ warm white pitcture light fitting with high out put diffuser 10 watt 220 V AC decorative type with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete all as specified and as directed.

S & F in repairs LED panel decorative down light fitting/recess mounted square type white/ warm white 2X2 36W with high out put diffuser 220 V AC with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete all as specified and as directed.

S & F in repairs LED panel decorative surface mounted square type white/ warm white 2X2 36W with high out put diffuser 220 V AC with driver holder and LED lamp including connecting up with flexible copper conductor cable of suitable size complete all as specified and as directed.

Supply and fixing reversible split unit Air Conditioner electric driven, single phase of capacity of 2.0 TR complete all as specified and as directed.

Supply and fixing voltage stabilizer for automatic operation, single phase naturally air cooled indoor type and designed for input voltage 110 V to 250 V with output voltage 230 V with accuracy of +- 2.5 % and capacity 5KVA complete all as specified and as directed.

Copper tubing including brazing and lead testing alongwith foam insulation of any size as required for fixing of split AC of capacity 2.0/1.5 tone complete all as specified and as directed. Make :- GODREJ/ATLAS/DEVIDYAL size 5/8 and 1/4.

Sub main wiring with two single core PVC insulated FRLA unsheathed copper conductor cable 1100 volts grade 6 sqmm size in PVC conduit heavy duty ISI marked with 6 Sqmm PVC insulated FRLS copper conductor cable as earth lead to connecting to earth dolly complete all as specified and as directed.

S&F wiring for connection between outer and inner unit of split AC with four single core PVC insulated FRLS unsheathed copper conductor cable 1100 volts grade 2.5 Sqmm size in PVC conduit heavy duty ISI marked with 2.5 Sqmm PVC insulated FRLS copper conductor cable as earth lead/single to connecting to earth dolly complete all as specified and as directed.

SODHI TRADING CORPORATION

SINGH CONST CO

khajuria builders

VIRINDER SINGH

PARDEEP SHARMA