CWE/P-28/2024-25

Amount

M&L for Repair to potholes depth of pot holes exc 30 mm, not exc 1Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25 mm in depth, making good by applying tack coat using paving bitumen VG-10 @ 5 kg per 10 sqm, putting in premixed bituminous macadam, well rammed and sealed with binder 9.8 kg per 10 sq m, blinded with 0.09 cum of stone chippings, 6.3 mm size and again well rammed (including supply of premixed macadam, binder and chippings) complete all as specified and directed.

M&L for Preparing old black top surfaces by brushing with wire brushes for removing caked mud vegitation grass etc, sweeping with brooms and finally fanning the cleaned surface with mechanical air compressor to remove all loose dirt etc and applying evenly a priming/tack coat with bituminous primer using paving bitumen VG-10 @ 5 Kg / 10 Sqm and bituminous premixed asphaltic semi dense concrete 30mm consolidated thickness using crushed graded stone aggregate mixed with binder content of paving bitumen VG-30 with 5.5% binder contents by weight of total mix by using self propelled mechanical paver, rolled and compacted to required camber and gradient with 8 to 10 Tonne capacity power roller including preparation of bitumen carpet in digital computarized weigh batch hot mix plant, complete all as specified. Note: The quantity of bitumen shall be provided as per Design mix approved by GE. (The cost of transportation of the material to the Govt approved lab and design mix charges shall be borne by the contractor). for the purpose of quoting, the contractor shall consider 5.5% binder by weight of total mix. However, the work shall be executed as per approved design and price adjustment shall be done only for variation (plus or minus) in quantity of binder priced at supply only rate of bitumen (as per purchase voucher of main producer).

M&L for premixed bituminous macadam (design mix) with 4 % of binder content by weight of total mix using paving bitumen VG-30 mixed in mechanical hot mixed plant and premixed material laid with mechanical paver finished including rolling to required camber and gradient (consolidated thickness 75 mm or less) with 8 to 12 tonne power roller to required compaction, complete all as specified and directed. Note: The quantity of bitumen shall be provided as per Design mix approved by GE. (The cost of transportation of the material to the Govt approved lab and design mix charges shall be borne by the contractor). for the purpose of quoting, the contractor shall consider 4% binder by weight of total mix. However, the work shall be executed as per approved design and price adjustment shall be done only for variation (plus or minus) in quantity of binder priced at supply only rate of bitumen (as per purchase voucher of main producer).

M&L of new/ old black top surface road surface and applying one coat of retro reflective thermoplastic road marking paint 2 mm thick for longer durability with 8% glass beads using special applicator machine with heating arrangement upto 160 degree celcius. Paint material shall be conforming to Ministry of surface transport (MOST) specification 803.4 Vol - I as laid down in specification of road/ bridge work "third revision" after cleaning surfaces, complete all as specified and directed.

S&F in repair Dual directional reflective cat eye of aluminium casted stud 100x100mm having micro cube corner spark glow reflector white/ red/ yellow on side provided with steel zinc plated nail of dia 12mm of length 120mm for fixing to road by hammering etc, complete all as specified and directed.

Solar road delineator with 6 LEDs of red/yellow colour housed in plastic body with LEDs, solar-cells, battery and light sensor well protected in polycarbonate sheet; device protected with powder coated wire mesh cage, equipped with solar system mounted over 47mm dia of 16 gauge wall thickness CRC steel tube powder coated of total height 1000mm having sheet foot for firm grip to base. Delineator to have additional reflective bands equipped with solar system workable for 2-3 days (nights) after full charge of 8-10 hours, including excavation in any strata and embedding in PCC 1:3:6 type C-1 of size 30cm x 30cm x 40cm, etc complete all as specified and directed.

S&F solar cat eye aluminium alloy shall (100% water proofing design according to IS) of size 125mm x 125mm of high efficiency Moncrystalline solar panel 2.4V/0.3 watt one NI-ed rechargeable battery (1.2V/1600MA) consisting of super bright LED with 10,000 to 18,000 MCD complete all as per manufactures instructions and all as specified and directed.

S&F in repair stainless steel location boards type 'C' of size 100cmx 76cm made up of stainless steel tubes framing of grade Fe 304 with top board of 9ft above ground with letters, figures sand base of high density prismatic retro reflective tape of superior quality on both sides of the aluminium composite pannels (ACP) 3mm thick incl. nacessary excavation for potholes of size 30cmx30cmx60cm deep with PCC 1:2:4 type B-2 using 40mm graded aggregate, complete all as specified and directed.

S&F in repair polycarbonate convex road safety mirror of size 600mm dia duly plastic framed back covered and provided with holding clamp arrangement having wide field of vision exterior weatherproof, bright reflection, antiglare, and easy to maintain suitable for installingon blind curves over the wall or pole etc including round stand post 50mm dia made out of 1.65mm thick steel CRC sheet of total length 2000mm having hold fast at the bottom and top end closed with MSD sheet painted white with synthetic enamel paint over a coat of red oxide metal primer, complete all as specified and directed.

Notes : The Schedule of Credit amount shall be deducted from the total of this schedule (BoQ) to arrive at Contract Sum.

M/S RAJESH WADHERA GOVT. CONT. (BID ID -3141053)

Sandeep Kumar (BID ID -3140926)