ADDN/ALTN TO OTM ACCN BLDG NO E-11 AND E-12, PROVN OF TOILET BLOCK WITH HARD STANDING PATHWAY AND PROVN OF GUARD POST RECEPTION CABIN (SIZE 10X10 FT) UNDER AGE B/R-I OF GE GOLCONDA

Amount

Dismantling AC/Galvalume/GI Sheets (corrugated, semi corrugated etc) as in roof coverings etc complete all as specified and directed.

Dismantling wrought iron or mild steel work of any description not otherwise provided for etc complete all as specified and directed

S & F for Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161- 1979 grade St.-240 complete all as specified and directed

M&L pre- painted galvalume aluminum zinc coating GI Based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, fixed with self tapping screws complete all as specified and directed.

M&L pre- painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof overing/ cladding to wall, ridges, gutters, fixed with self tapping screws complete all as specified and directed

S & F for MS framed structure roof trusses (framed), trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats of Grade Fe 410 -W (Gde- E- 250) quality- A etc. complete all as specified and directed

M & L for preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed

Material and labour Preparation of old painted steel surfaces of any description over 10 cms width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed

Material and labour Preparing surfaces of wood and wood based materials, new or old, of any description and girth, not otherwise described and treated with two coats of creosote oil complete all as specified and directed

Dismantling of boarding, any description fixed in any position with nails AND Providing and fixing false ceiling at all heights with GRG (Glass Fibre Reinforced Gypsum ) False ceiling tiles of size 595 x 595 mm of approved texture, design and patterns having moisture contents less than 2% humidity resistance of 99% NRCO.50 to .75 as pe IS8225:1987, Noncombustible as per BS 476 (Part 4)-1970 and light reflectance of 85% (Minimum) to be laid in true horizontal level suspended on interlocking metal T Grid of hot dipped galvanized iron section of 0.33 mm thick ( galvanised @ 120 gms per sqm including both sides ) comprising of main T runners of size 15 x 32 mm of length 3000mm, cross -T of size 15 x 32 mm of length 600mm to form grid module of size 600 x 600mm, suspened from ceiling using galvaized mild steel items ( galvanizing @ 80 grams per sqm) i..e 50mm long, 8mm outer diameter M-6 dash fastener 6mm dia fully threaded hanger rod upto 1000mm length and L-swhape level adjuster of size 85x25 x 2mm galvanised iron permieter wall angle of size 24 x 24 x 0.40mm of length 3000mm to be fixed on periphery wall/ partition with the help of plastic rawl plugs at 450 mm ceneter to centre and 50mm long dry wall wood screws. The work shall be carried out as per specifications, drawing and as per directions of the Engineer-in-charge.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc. and removing from site of work complete all as specified and directed.

M & L for brick work with sub-class `B' bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and directed.

M&L for brickwork with sub class ‘B’ bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 complete all as specified and directed.

Taking down cement plaster on wall of any description including racking out joints for key, scrubbing with water etc. complete all as specified and directed.

M & L for rendering 15mm thick in cement mortor 1:4 on concrete or brick wall surfaces, finished even and smooth without using extra cement, mixed with WPC @ at 3% by weight of cement and including preparing newly plastered surfaces of walls and applying Two coats of cement based paint complete all as specified and directed. Note: IWPC measured and paid separately.

Supply only integral water proofing compound (BIS Mark)

Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM1:6 and preparation of newly plastered surfaces applying two coats of colour wash on wall complete all as specified and directed

Material and labour for rendering 15mm thick on fair faces of brick work or concrete surfaces in CM1:4 mixed with WPC @ at 3% by weight of cement and preparation of newly plastered surfaces applying two coats of colour wash on wall complete all as specified and directed

M & L for rendering 10mm thick in cement mortor 1:6 on Brick wall surfaces, finished even and smooth without using extra cement including prepation of newly plastered surfaces of wall and two coats of oil bound distemper over a coat of alkali resistant primer including 3mm thick wall care putty on wall complete all as specified and directed.

M&L for Rendering 5mm thick in CM (1:3) as in ceilings, concrete surfaces finished even and smooth (without using extra cement) and including preparation of new ceiling surfaces and applying three coat of white wash complete all as specified and directed.

M&L Preparing newly plastered wall surfaces and apply two coats of oil boud distemper emulsion over a coat of primer complete all as specified and directed.

M&L for complete removal of existing treatment and applying two oil bound distemper over a coat of alkali resistant primer on old surface of walls including 3mm thick wall care putty complete all as specified and directed.

M&L for complete removal of existing treatment and applying two coats of cement base paint on walls surfaces complete all as specified and directed.

Ronding to edges of stones slab one edge,such as in steps, cooking plate form, and other similar situation complete all as specified and directed.

M & L Granite (of any type) work (table rubbed and polished) 20 mm thick in steps, jambs, pillars, window-cills, cooking platforms,over 15 mm thick screed bed in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite, etc including bull nosing complete all as specified and directed.

Material and labour Machine cut kota stone slab flooring 20-25mm thick over 20mm thick screed in CM 1:6 over PCC sub base/RCC slab. laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Material and labour machine cut Kota stone slab 20-25mm thick in riser of step, skirting, dado & pillar laid over 10mm thickbacking coat of CM 1:3.& jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed.

Material and Labour plain Cement Concrete Type B1 1:2:4 (using 20 mm graded granite stone aggregate) cast in situ in lintels up to 1.5 M span, cills and other similar bands, plinth courses, parapets, copings, bed plates and the like including weathering, slightly rounded complete all as specified and directed.

Dismantling Stone slabs and tiles of any description or thickness in floors, plinth Protection, aprons etc Laid, bed-ded and pointed in any mortar complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description of any position not otherwise specfically provided for as in sunken floors & floor etc complete all as specified and directed.

M&L for 25mm thick cement concrete type B-0, 1:2:4 (using 12.50mm graded aggregate) surface finished even and smooth without using extra cement sub-base/floor finish complete all as specified and directed.

M & L for 75 mm thick PCC 1:3:6 type C2 (Using 40 mm graded granite stone aggregate) as in plinth protection finishd even and smooth with out using extra cement complete all as specified and directed.

Surface excavation n exe (not exceeding) 30 cm dep and averaging 15 cm deep and getting out soft/ loose soil complete all as specified and directed.

Excavation in trenches not exc 1.5 m wide and not exc 1.5 m in depth for foundation etc or for shafts wells, cesspits, manholes, pier holes etc not exc 10sqm on plan and getting out in hard/dense soil complete all specified and directed.

M&L Returning, filling in, inclu spreading, levelling, watering and well ramming in layers not exc 25cm in soil complete all as specified and directed.

M&L for removing excavated surplus soil n.exc 50m and depositing where directed at a level n.exc 1.5m above the starting point complete all as specified and directed.

M&L Hardcore of gauge n exc. 63mm, deposited, spread and levelled in layers n exc. 15CM thick, watered and rammed to a true surface etc complete all as specified and directed.

M&L for PCC type D2 1:4:8 (using 40mm graded stone aggregate) as in foundations, filling and mass Concrete complete all as specified and directed.

M&L for 75mm thick PCC (1:4:8) type D-2 using 40mm graded stone aggregate as in floor sub-base complete all as specified and directed.

M&L for 25mm thick Cement concrete type B-0, 1:2:4 (12.50mm graded aggregate) Finishing cement concrete surface even and smooth Without using extra cement complete all as specified and directed

M&L chequered cement concrete tiles 300mm x 300mm x 25mm thick with grey cement and pigment, machine pressed, set jointed and pointed in neat cement slurry in floors including 15 mm thick screed bedding layer in CM 1:6 complete all as specified and directed.

Taking down shutter and Resecuring or easing and adjusting of shutter and Re fixing same opening exc 1 Sqm n exc 2 Sqm each complete all specified and directed.

Resecuring chowkats without taking down chowkats with shutters frame exc 1.5 Sqm and n.exc 4 Sqm each complete all specified and directed.

Taking down shutter and Resecuring or easing and adjusting of shutter and Re fixing same opening n exc 1 Sqm each complete all specified and directed.

Resecuring chowkats without taking down chowkats with shutters frame n exc 1.5 Sqm each complete all specified and directed.

Taking down chowkats with shutters and Resecuring or easing and adjusting of chowkat and shutters Re fixing same opening exc 1.5 Sqm n exc 4 Sqm each complete all specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frame exc 1.5 Sqm and n.exc 4 Sqm each complete all specified and directed.

Taking down chowkats with shutters (without taking off shutters from the frame Not exc 1.5 Sqm each complete all specified and directed.

Material and labour 2nd class hard wood plain solid, straight chowkats and frames wrought, framed rebeated on the solid rounded or chamfered out together with glue pinned at joints complete all specified and directed.

Material and labour 2nd Class hard wood 35mm Flush door shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all specified and directed.

Material and labour 2nd class hard wood 35mm thick, glazed and skeleton shutters open rebated and prepared to receive glass or gauge etc divided into squares with plain chamfered or rounded and rebated sash bars any numbers complete all specified and directed.

Material and labour Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperature 1.40 mm and fixed with wooden beading or with nuts and bolts to existing steel windows/wooden windows complete all specified and directed.

M&L for hold fasts Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required; hooks (stay), heavy, for large gates; hook & pintle hinges; large hasps & staples; chains; hand made slidings bolts; clamps; hold fasts; wall ties; hook for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; plate washers & similar small articles conforming to Fe 290 GDE E-165 complete all specified and directed.

Treating ends of posts, backs of Chowkats, etc., area tarred exc 0.1 sq.m but n exc 0.5 sq.m. each treated with tar or coal tar black paint complete all specified and directed.

Treating small articles such as stop, covers, gully gratings, holdfasts, ends of post, backs of Chowkats, etc., area n exc 0.1 sq.m each treated with tar or coal tar black paint complete all specified and directed.

S&F for Butt hinges,100mm medium weight, cold rolled mild steel, and fixed complete all specified and directed.

S&F for Extruded aluminium alloy handles,150mm fabricated type anodized complete all specified and directed.

S&F for Alluminium, 200mm anodized, barrel tower bolts extruded section & fixed complete all specified and directed.

Supply and fixing 300mm Mild steel sliding door bolts, plate type, stove enameled black, with bright bolt not less than 12mm dia with and including a minimum of 6 bolts & nuts, four on bolts plate & two on staple plate & fixed complete all specified and directed.

Material and Labour for preparation of old painted wooden surfaces of any description, not otherwise described, over 10 cm width or girth and applying one coat of Synthetic enamel paint (Ordinary tint) over a old painted surfaces complete all as specified and as directed.

Material and Labour for preparation of New or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of Synthetic enamel paint (Ordinary tint) over a coat of Pink primer complete all as specified and as directed.

S&F 150mm Floor door stopper of aluminum alloy body & tongue, anodized, with hard drawn steel spring, fixed in floor complete all specified and directed.

Supply and fix Mild steel 300mm long ordinary rat tail rod pattern springs including roller and roller plate complete all specified and directed.

M&L Harrison rails, anodised alluminium alloy with fixing brackets, stops, rollers etc complete all specified and directed.

S&F sheet 4mm thick and glazing with oil putty/ aluminium beads n.exc. 0.50sq.m. each pane complete all specified and directed.

S&F sheet 5.50mm thick and glazing with oil putty/ alu beads exc. 0.50sq.m. each pane complete all specified and directed.

Supply and fix for double shutter pre coated box type steel window with side hung shutters (Glazed and gauzed) including hinges with steel handle and peg stay complete with or with out glazing bars dovtailed or welded complete all specified and directed.

S & F 75 mm PVC (SWR) pipes single socketed, in any length with rubber ring joints or solvent cement, laid in trenches or in floors complete all specified and directed.

S&F PVC (SWR) pipes single socketed, in any length with rubber ring joints, laid in trenches, floors or fixed to walls 110mm bore complete all as specified and directed

S&F PVC(SWR) vent cowl 75mm bore complete all specified and directed.

S&F PVC (SWR) reducer 110mm bore complete all specified and directed.

S&F PVC (SWR) bends with access door any radius 75 mm dia complete all specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal of bore 75mm complete all specified and directed.

S&F PVC (SWR) junction single (single T) equal or unequal with access door of bore 110mm complete all specified and directed.

S&F in repair PVC (SWR) floor trap 75mm dia outlet, plain with grating including jointing with solvent cement complete all specified and directed.

S&F forPVC (SWR) gully trap 125 mm setting and jointing with solvent cement complete all specified and directed.

M&L for Pre Cast Cement Concrete 1:2:4 type B1 (using 20 mm graded aggregate) as in Cover slab for manholes etc set in cement mortor 1:4 including use and waste necessary form work complete all specified and directed.

M&L for mild steel TMT bars 10mm dia and over, cut to length bent to shap required including cranking, bending spirally for hooping for columnshooking ends and binding with and including mild steel wire (annealed not less than 0.9 mm dia or securing with clips complete all specified and directed.

S&F TMT steel bars 6mm to 8mm dia cut to length, bent to required shape including cranking, bending, hooking ends and bending with mild steel wire (annealed) not less then 0.9mm dia complete all specified and directed.

M&L Pre-cast cement concrete block masonry with solid blocks Type C1 1:3:6, exc. 10CM in width and setting in mortar, complete built in CM 1:6 complete all specified and directed.

M&L Damp proof course In cement concrete 1:2:4, type B-0 25mm thick to horizontal or vertical surfaces including necessary formwork complete all as specified and directed.

M&L moorum filling under floors or in foundations in layers n exc. 25 cm thick well ramming including watering and consolidation complete all as specified and directed.

M&L for non skid, coloured, ceramic tiles 300x300x7mm thick in joint less, floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick Screed bed or bedding layer of mortor CM 1:6 complete all as specified and directed.

M&L for coloured glazed ceramic tiles 300x450x7mm thick in vertical surfaces, set and jointed in neat cement slurry and pointed in coloured cement to match including rendering 10mm thick on fair faces of brick work or concrete sufaces on internal wall surfaces CM 1:4 complete all as specified and directed.

Formwork to sides of concrete foundations, rough finished surfaces of flat concrete, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter,etc complete all as spfd and directed.

Formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. finishing rough finished surface of concrete complete all as specified and directed.

Formwork to,rough finished surfaces of concrete,square, rectangular or polygonal, sides of pillars, posts, struts, piers, columns and stanchions,etc complete all as spfd and directed.

Formwork to chullah hoods, chajjas, troughs and similar items including edges finishing rough finshined surface of concrete complete all as specified and directed.

Formwork to,rough finished surfaces of concrete, edges of concrete flats, treads, breaks in floors, window cills, concrete railings,openings in concrete walls, floor and roofs n exc 20 cm wide and sides of RCC/PCC bands in walls, horizontal or sloping and similar work exc 10cm but n exc 20cm wide,etc complete all as spfd and directed.

Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) finishing rough finshined flat surface of concrete complete all as specified and directed.

S&F Provide precast cement concrete Type B0 1:2:4 (12.5 mm graded aggregate) louvers & jallies, 25mm thick (measured solid), including all mouldings but excluding frame set in CM 1:4 complete all as specified and directed.

M&L RCC Type B1 1:2:4 using 20mm graded aggregate (Nominal mix) as in Beams, cantilevers, bressummers, lintels OVER 1.5m span etc. complete all as specified and directed.

M&L Reinforced cement concteteType B1, 1:2:4 (20 mm graded stone aggregate) as in foundation, including raft footings, foundation beams, plinth beams, bases for column etc., basement slab, under reamed piles and mass concrete complete all as specified and as directed.

M&L for Reinforced cement concteteType B1, 1:2:4 (20 mm graded stone aggregate) as in Columns, pillars, piers,posts and struts etc complete all as spd and directed.

M&L for RCC 1:2:4 type B1 using 20mm graded aggregate as in shelves,chajja and the like complete all as specified and directed.

M&L for Reinforced cement concteteType B1, 1:2:4 (20 mm graded stone aggregate) in slabs supported on walls, beams, landings, balconies, canopies, deck slabs and, shelves and similar works etc complete all as specified and directed.

M&L Rendering 10mm thick green plaster in concrete surfaces in CM 1:3 mixing with water proofing compound complete all as specified and directed

S&F Hydraulically pressed burnt clay tile plain of size 200x200x19/20mm machine made laid over & including cement mortar screed 15mm thick in CM 1:6 mixed with water proofing compound and jointed, pointed in CM 1:3 complete all as specified and directed

S&F Pressed steel frames 125x60 mm for doors with one or more rebates including necessary fixing lugs, hinges, lock strike plate, etc., complete all as specified and directed

Anodised aluminums powder coated frame for doors, ventilators, grills and Sliding windows with one or more rebates including joining cleat and handles for fixing etc. complete all as specified and directed

M&L for Cement plaster bed or bedding layer of mortar 10mm thick for laying floor finishes CM1:3 using Integral waterproofing compound when concrete is green and Applying a uniform coat of blown grade bitumen VG-10 at 1.20 Kg/Sqm over a coat of primer at 0.70Kg/Sqm over clean cement plaster surface over APP based polymeric membrane minimum weighing 3 kg/sqm and a minimum 4 mm thickness reinforced with polyster non wove fabric (wt not less than 150 gms/sqm) land on primed surface by forced application complete incl Applying 2 coats of Aluminium paint over bituminius surfaces (APP Membrane) complete all as specified and as directed. (Note: IWPC Measured and paid seperatley)

Material and labour Solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with M.S. Square tube, supplying & fixing in opening complete all specified and directed.

Supply and fix factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded / sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification complete all specified and directed.

Supply and Fix 100mm Butt hinges, extruded Aluminium alloy with galvanised mild steel hinge pin,anodised and fixed, type C-21 complete all specified and directed.

S & F 200mm long aluminium, anodised, or matt finished barrel tower bolts of extruded section complete all specified and directed.

S&F 150 mm size extruded aluminium alloy bow handles, cast type with plate, matt or anodised finish complete all specified and directed.

S & F for rotational moulded polythene water storage tank (cylindrical vertical with closed top) Tripple layered (White colour) hoisted 500 litre capacity and fixed in position all as specified and directed

S & F Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe and fixed. (Minimum weight 20 mm - 210 gms) Bore dia of pipe in 20 mm, etc complete all as specifed and directed.

S&F for gunmetal globe or gate valve with iron wheel head screwed both ends for iron pipe of 20mm bore complete all as specified and directed.

Supplying and fixing of 16mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and directed

S&F galvanized steel water tubing medium grade of 20mm bore complete with all fittings such as bends elbows, tees, short pieces, connectors, back nuts, diminishing pieces, caps and pigs, unions complete all as specified and directed.

S&F for 15 mm dia Stop valves (angle cock), cast copper alloy, fancy type, chromium plated screwed down, high pressure, screwed both ends for iron pipe or for unions and fixed complete all as specified and directed.

Supply and fixed 15 mm bore Bib taps cast copper alloy Chromium plated with fancy type, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and directed

Supply and fix PVC connection 15mm size with PTMT nuts of length 450mm complete all as specified and directed.

S & F for 15 mm dia Pillar taps fancy type, chromium plated, screwed down high pressure, with lettered ‘Hot' or ‘Cold' with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed.

S&F for Vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) incl Pedestal pan and trap, connection to drain (or outgoing pipe) and to flushing pipe, antisyphonage pipe, seat cover etc, complete all as specified and directed.

M&L for Cutting chases in brick wall, pinning in, making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc. and making good, cutting not exceeding 10 cm girth complete all as specifed and directed.

S&F PVC valveless syphonic action type flushing cistern 10 lit capacity low level white with inlet, ball valve, float and handle including brackets and 32mm PVC flush pipe in complete all as specified and directed.

Supply and fix wash hand basin Vitreous china white flat back size 550x400mm excluding taps, waste, chain and plug and porcelain stopper but including brackets complete all as specified and directed.

S & F for vitreous china bowl urinal flat back size of 465 x 355 x 265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern & flush pipe) but exncluding waste pipe, complete including providing & fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with screws, pointing around urinal back in cement complete all as specified and directed.

S&F for Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and directed.

M&L for Cutting into existing manholes for connecting new drains, making good to pipe and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B-1 smooth finished, and reforming benching complete all as specified and directed.

M&L for Cutting opening in cement concrete walls (any descript-ion) for door, window and other openings (with or without reveals) or enlarging existing openings including trimming surfaces to receive rendering, etc. complete all as specified and directed.

M&L Cutting channels, grooves or rebates n exc 15cm girth, and trimming surface complete all as specified and directed.

M & L for Providing, cement concrete type B-1 (1:2:4) using 20mm aggregates as in kerbs stone, rounded or chamfered on edge complete all as specified and directed.

M&L for 60mm thick M-35 grade factory made rubber moulded precast concrete interlocking paver block in grey cement with pigments and of approved size and shape and conforming to IS 15658-2006, with and including 75mm thk sand cushion bedding layer laid to true line, level watered and mechanically compacted etc complete all as specified and directed.

Taking down carefully existing point wiring of any description for (light, fan ,sockets bells etc) complete including fittings such as sunken boxes, switches, sockets, ceiling rose, lamp holders, brackets ,fittings, pendants, fan regulartors etc and making good the disturbed surface of walls, floors etc. all as specified and directed.

Taking down existing sub main wiring /Service wire of any description and size including earth wire, batten, conduits and making good the disturbed surfaces of walls, floors etc. complete all as specified and directed.

M&L Point wiring for one light point/fan point/bell point controlled by one switch with 1.5 sqmm multistrand copper conductor cable PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 1.50 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable ( green colour) as earth lead in and including PVC rigid conduit with all fittings for concealed type on stone/brick, masonary walls, roof etc including new CI/MS sunken box of required size and all as directed by Engineer-in-Charge & 3 mm thick plastic laminated sheet for housing switches sockets, regulators etc. including cutting/running chases, pinning in and making good the disturbed surfaces to match with the existing specification, complete all as specified and directed.

All as per item No.130 but One 5 pin 5/6 Amps switch socket outlet on independent board complete all as specified and directed

All as per item No.130 but One 5 pin 5/6 Amps switch socket outlet on same board complete all as specified and directed

All as per item No.130 but for One 5 pin 15 / 16 Amps switch socket outlet point on independent board with 4 sqmm PVC (FRLS) insulated unsheathed copper conductor single core multi stand flexible cable and 4 sqmm PVC (FRLS) insulated unsheathed copper conductor single core cable (green colour) as earth lead complete all as specified and directed

S&F switch piano flush type single pole one way 5/6 Amps complete all as specified and directed

S&F Switch socket outlet combination universal type 2 in 1, 2 and 3 pin 5 Amps piano flush type, 240 Volts complete all as specified and directed

S&F Switch socket outlet combination universal type 2 in 1 and 3 pin 15 Amps piano flush type, 240 Volts complete all as specified and directed

S&F Ceiling rose surface bakelite 65 x 50 mm 2/3 terminals complete all as specified and directed

S&F Fan Regulator (Rotary step type, Switch/Socket type Dimmer) 230/240V, AC complete all as specified and directed.

S&F for LED Tube light fitting 20W, 220W, AC, decorative box type with driver, and holder including LED Tube light and including connecting up with three core flexible PVC copper conductor cable of suitable size from ceiling rose complete all as specified and directed.

Supply and fixing LED street light fitting 35/36 Watt 230 V AC outdoor type with high pressure die cast aluminum hosing and heat resistant complete with driver, lamp bracket with impact and corrosion resistant including thermal management in multiple optics complete with IP 65/66 protection complete all as specified and directed.

S&F for LED light fittings, 1x10 watts bulk head luminaires, IP66 complete with all accessories and including connecting up with twin core twisted flexible PVC copper conduct cable of 23/0.0076 from ceiling rose all as specified.

S&F Energy efficiency LED Building Security light fitting of 25Watt with IP-66 degree of protection including nuts, bolts, fixtures etc complete all as specified and as directed.

Supply and fixing ceiling fans complete with blades, down rods, electronic regulator and accessories, 230V, 1200mm sweep, min air delivery 210 CFM with service value 6.00 BEE, five star rated with brushless direct current motor (BLDC) complete all as specified and directed.

M&L Exhaust fan, PVC Body of 230mm Sweep, 1200RPM, 230 Volts, 50Hz complete all as specified and directed.

S&F Sheet metal enclosure MCB distribution board including suitable rated bus-bar single pole and neutral 240V, 8 Ways, IP-43 double door complete all as specified and directed.

S&F Sheet metal enclosure MCB distribution board including suitable rated bus-bar single pole and neutral 240V, 4 Ways, IP-43 double door complete all as specified and directed.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of SPN and current carrying capacity 6-32 Amp, in the MCB DB complete with connection testing and commissioning complete all as specified and directed.

Supply and fixing 240V, 10 KA 'C' curve miniature circuit breaker (MCB) of single poles and current carrying capacity 6 to 32 AMP, in the MCB DB Complete with connection testing and commissioning complete all as specified and directed.

Submain wiring with two single core PVC (FRLS) insulated flexible copper conductor cable of size 4.00 Sqmm and one single core PVC (FRLS) insulated unsheathed flexible copper conductor cable green colour of size 4.0 Sqmm as earth lead in and including PVC conduit medium grade with all fittings suitable for concealed type and making good the disturbed wall surfaces to match with existing specification all as required at site complete with all as specified and directed.

S &F for 1100 Volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 Metre apart including 4mm dia suspension wire, twin core 4.00 Sqmm flat cable or circular in service connections complete all as specified and as directed.

S &F for 1100 Volts grade heavy duty cable PVC insulated aluminium conductor, served with inner sheathing of PVC tape and overall PVC sheathed in service connections suspended by insulating hangers not more than 1 Metre apart including 4mm dia suspension wire, 10 Sqmm nominal cross section in service connections complete all as specified and as directed.

Earthing complete with galvanized steel earth plate electrode 60cmx60cmx6mm thick buried directly in ground (earth pit not less than 2.25 mtr below ground level) with top edge o the plate not less1.5 mtrs below normal ground level connected to galvanised earth lead wire 4 mm dia by means of bolts nuts, check nuts and washers of galvanized iron of steel all as shown in electrical plate No.3 connected to earthing test point incl necessary earth work, excavation PCC 1:3:6 type CI using 20mm graded stone aggregate for earth chamber provn of PCC cover 40 mm thick 1:2:4 mm type B1 funnel with water Pipe, GI pipe, 15mm dia medium grade protection pipe, GI earth lead complete all as specified and directed.

Sri Lakshmi Enterprises (BID ID -3133593)

NAVANAND ENTERPRISES (BID ID -3133340)

STANDARD AGENCIES (BID ID -3137802)

VACON INFRASTRUCTURES (BID ID -3145280)